Introduce reset parameter to mtk_wed_tx_ring_setup signature.
This is a preliminary patch to add Wireless Ethernet Dispatcher reset
support.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Update mtk_wed_stop routine and rename old mtk_wed_stop() to
mtk_wed_deinit(). This is a preliminary patch to add Wireless Ethernet
Dispatcher reset support.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove duplicated code. Increase poll timeout to 10ms in order to be
aligned with vendor sdk.
This is a preliminary patch to add Wireless Ethernet Dispatcher reset
support.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move MTK_WDMA_RESET_IDX configuration in mtk_wdma_rx_reset routine.
Increase poll timeout to 10ms in order to be aligned with vendor sdk.
This is a preliminary patch to add Wireless Ethernet Dispatcher reset
support.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Miquel Raynal says:
====================
Marvell nvmem mac addresses support
Now that we are aligned on how to make information available from static
storage media to drivers like Ethernet controller drivers or switch
drivers by using nvmem cells and going through the whole nvmem
infrastructure, here are two driver updates to reflect these changes.
Prior to the driver updates, I propose:
* Reverting binding changes which should have never been accepted like
that.
* A conversion of the (old) Prestera and DFX server bindings (optional,
can be dropped if not considered necessary).
* A better description of the more recent Prestera PCI switch.
Please mind that this series cannot break anything since retrieving the
MAC address Prestera driver has never worked upstream, because the (ONIE
tlv) driver supposed to export the MAC address has not been accepted in
its original form and has been updated to the nvmem-layout
infrastructure (bindings have been merged, the code remains to be
applied).
====================
Link: https://lore.kernel.org/r/20221124111556.264647-1-miquel.raynal@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ONIE standard describes the organization of tlv (type-length-value)
arrays commonly stored within NVMEM devices on common networking
hardware.
Several drivers already make use of NVMEM cells for purposes like
retrieving a default MAC address provided by the manufacturer.
What made ONIE tables unusable so far was the fact that the information
where "dynamically" located within the table depending on the
manufacturer wishes, while Linux NVMEM support only allowed statically
defined NVMEM cells. Fortunately, this limitation was eventually tackled
with the introduction of discoverable cells through the use of NVMEM
layouts, making it possible to extract and consistently use the content
of tables like ONIE's tlv arrays.
Parsing this table at runtime in order to get various information is now
possible. So, because many Marvell networking switches already follow
this standard, let's consider using NVMEM cells as a new valid source of
information when looking for a base MAC address, which is one of the
primary uses of these new fields. Indeed, manufacturers following the
ONIE standard are encouraged to provide a default MAC address there, so
let's eventually use it if no other MAC address has been found using the
existing methods.
Link: https://opencomputeproject.github.io/onie/design-spec/hw_requirements.html
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This driver fist makes an expensive DT lookup to retrieve its DT node
(this is a PCI driver) in order to later search for the
base-mac-provider property. This property has no reality upstream and
this code should not have been accepted like this in the first
place. Instead, there is a proper nvmem interface that should be
used. Let's avoid these extra lookups and rely on the nvmem internal
logic.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Export
of_get_mac_addr_nvmem()
and rename it to
of_get_mac_address_nvmem()
in order to fit the convention followed by the existing exported helpers
of the same kind.
This way, OF compatible drivers using eg. fwnode_get_mac_address() can
do a direct call to it instead of calling of_get_mac_address() just for
the nvmem step, avoiding to repeat an expensive DT lookup which has
already been done once.
Eventually, fwnode_get_mac_address() should probably be updated to
perform the nvmem lookup directly, but as of today, nvmem cells seem not
to be supported by ACPI yet which would defeat this kind of extension.
Suggested-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Even though the devices have very little in common beside the name and
the main "switch" feature, Marvell Prestera switch family is also
composed of PCI-only devices which can receive additional static
properties, like nvmem cells to point at MAC addresses, for
instance. Let's describe them.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The currently described switch family is named AlleyCat3, it is a memory
mapped switch found on Armada XP boards.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Even though this description is not used anywhere upstream (no matching
driver), while on this file I decided I would try a conversion to yaml
in order to clarify the prestera family description.
I cannot keep the nodename dfx-server@xxxx so I switched to dfx-bus@xxxx
which matches simple-bus.yaml. Otherwise I took the example context from
the only user of this compatible: armada-xp-98dx3236.dtsi, which is a
rather old and not perfect DT.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit 40acc05271.
marvell,prestera.txt is an old file describing the old Alleycat3
standalone switches. The commit mentioned above actually hacked these
bindings to add support for a device tree property for a more modern
version of the IP connected over PCI, using only the generic compatible
in order to retrieve the device node from the prestera driver to read
one static property.
The problematic property discussed here is "base-mac-provider". The
original intent was to point to a nvmem device which could produce the
relevant nvmem-cell. This property has never been acked by DT
maintainers and fails all the layering that has been brought with the nvmem
bindings by pointing at a nvmem producer, bypassing the existing nvmem
bindings, rather than a nvmem cell directly. Furthermore, the property
cannot even be used upstream because it expected the ONIE tlv driver to
produce a specific cell, driver which used nacked bindings and thus was
never merged, replaced by a more integrated concept: the nvmem-layout.
So let's forget about this temporary addition, safely avoiding the need
for any backward compatibility handling. A new (yaml) binding file will
be brought with the prestera bindings, and there we will actually
include a description of the modern IP over PCI, including the right way
to point to a nvmem cell.
Cc: Vadym Kochan <vadym.kochan@plvision.eu>
Cc: Taras Chornyi <tchornyi@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Users of intel_gt_retire_requests_timeout() expect 0 return value on
success. However, we have no protection from passing back 0 potentially
returned by a call to dma_fence_wait_timeout() when it succedes right
after its timeout has expired.
Replace 0 with -ETIME before potentially using the timeout value as return
code, so -ETIME is returned if there are still some requests not retired
after timeout, 0 otherwise.
v3: Use conditional expression, more compact but also better reflecting
intention standing behind the change.
v2: Move the added lines down so flush_submission() is not affected.
Fixes: f33a8a5160 ("drm/i915: Merge wait_for_timelines with retire_request")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221121145655.75141-3-janusz.krzysztofik@linux.intel.com
(cherry picked from commit f301a29f14)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Commit b97060a99b ("drm/i915/guc: Update intel_gt_wait_for_idle to work
with GuC") extended the API of intel_gt_retire_requests_timeout() with an
extra argument 'remaining_timeout', intended for passing back unconsumed
portion of requested timeout when 0 (success) is returned. However, when
request retirement happens to succeed despite an error returned by a call
to dma_fence_wait_timeout(), that error code (a negative value) is passed
back instead of remaining time. If we then pass that negative value
forward as requested timeout to intel_uc_wait_for_idle(), an explicit BUG
will be triggered.
If request retirement succeeds but an error code is passed back via
remaininig_timeout, we may have no clue on how much of the initial timeout
might have been left for spending it on waiting for GuC to become idle.
OTOH, since all pending requests have been successfully retired, that
error code has been already ignored by intel_gt_retire_requests_timeout(),
then we shouldn't fail.
Assume no more time has been left on error and pass 0 timeout value to
intel_uc_wait_for_idle() to give it a chance to return success if GuC is
already idle.
v3: Don't fail on any error passed back via remaining_timeout.
v2: Fix the issue on the caller side, not the provider.
Fixes: b97060a99b ("drm/i915/guc: Update intel_gt_wait_for_idle to work with GuC")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: stable@vger.kernel.org # v5.15+
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221121145655.75141-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit f235dbd5b7)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
bigjoiner_pipes() doesn't consider that:
- RKL only has three pipes
- some pipes may be fused off
This means that intel_atomic_check_bigjoiner() won't reject
all configurations that would need a non-existent pipe.
Instead we just keep on rolling witout actually having
reserved the slave pipe we need.
It's possible that we don't outright explode anywhere due to
this since eg. for_each_intel_crtc_in_pipe_mask() will only
walk the crtcs we've registered even though the passed in
pipe_mask asks for more of them. But clearly the thing won't
do what is expected of it when the required pipes are not
present.
Fix the problem by consulting the device info pipe_mask already
in bigjoiner_pipes().
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118185201.10469-1-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
(cherry picked from commit f1c87a94a1)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
====================
bpf-next 2022-11-25
We've added 101 non-merge commits during the last 11 day(s) which contain
a total of 109 files changed, 8827 insertions(+), 1129 deletions(-).
The main changes are:
1) Support for user defined BPF objects: the use case is to allocate own
objects, build own object hierarchies and use the building blocks to
build own data structures flexibly, for example, linked lists in BPF,
from Kumar Kartikeya Dwivedi.
2) Add bpf_rcu_read_{,un}lock() support for sleepable programs,
from Yonghong Song.
3) Add support storing struct task_struct objects as kptrs in maps,
from David Vernet.
4) Batch of BPF map documentation improvements, from Maryam Tahhan
and Donald Hunter.
5) Improve BPF verifier to propagate nullness information for branches
of register to register comparisons, from Eduard Zingerman.
6) Fix cgroup BPF iter infra to hold reference on the start cgroup,
from Hou Tao.
7) Fix BPF verifier to not mark fentry/fexit program arguments as trusted
given it is not the case for them, from Alexei Starovoitov.
8) Improve BPF verifier's realloc handling to better play along with dynamic
runtime analysis tools like KASAN and friends, from Kees Cook.
9) Remove legacy libbpf mode support from bpftool,
from Sahid Orentino Ferdjaoui.
10) Rework zero-len skb redirection checks to avoid potentially breaking
existing BPF test infra users, from Stanislav Fomichev.
11) Two small refactorings which are independent and have been split out
of the XDP queueing RFC series, from Toke Høiland-Jørgensen.
12) Fix a memory leak in LSM cgroup BPF selftest, from Wang Yufen.
13) Documentation on how to run BPF CI without patch submission,
from Daniel Müller.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20221125012450.441-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fileserver probing code attempts to work out the best fileserver to
use for a volume by retrieving the RTT calculated by AF_RXRPC for the
probe call sent to each server and comparing them. Sometimes, however,
no RTT estimate is available and rxrpc_kernel_get_srtt() returns false,
leading good fileservers to be given an RTT of UINT_MAX and thus causing
the rotation algorithm to ignore them.
Fix afs_select_fileserver() to ignore rxrpc_kernel_get_srtt()'s return
value and just take the estimated RTT it provides - which will be capped
at 1 second.
Fixes: 1d4adfaf65 ("rxrpc: Make rxrpc_kernel_get_srtt() indicate validity")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/166965503999.3392585.13954054113218099395.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I got the following report while doing device(mscc-miim) load test
with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled:
OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /spi/soc@0/mdio@7107009c/ethernet-phy@0
If the 'fwnode' is not an acpi node, the refcount is get in
fwnode_mdiobus_phy_device_register(), but it has never been
put when the device is freed in the normal path. So call
fwnode_handle_put() in phy_device_release() to avoid leak.
If it's an acpi node, it has never been get, but it's put
in the error path, so call fwnode_handle_get() before
phy_device_register() to keep get/put operation balanced.
Fixes: bc1bee3b87 ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221124150130.609420-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the call trace shows, the original skb was freed in tipc_msg_validate(),
and dereferencing the old skb cb would cause an use-after-free crash.
BUG: KASAN: use-after-free in tipc_crypto_rcv_complete+0x1835/0x2240 [tipc]
Call Trace:
<IRQ>
tipc_crypto_rcv_complete+0x1835/0x2240 [tipc]
tipc_crypto_rcv+0xd32/0x1ec0 [tipc]
tipc_rcv+0x744/0x1150 [tipc]
...
Allocated by task 47078:
kmem_cache_alloc_node+0x158/0x4d0
__alloc_skb+0x1c1/0x270
tipc_buf_acquire+0x1e/0xe0 [tipc]
tipc_msg_create+0x33/0x1c0 [tipc]
tipc_link_build_proto_msg+0x38a/0x2100 [tipc]
tipc_link_timeout+0x8b8/0xef0 [tipc]
tipc_node_timeout+0x2a1/0x960 [tipc]
call_timer_fn+0x2d/0x1c0
...
Freed by task 47078:
tipc_msg_validate+0x7b/0x440 [tipc]
tipc_crypto_rcv_complete+0x4b5/0x2240 [tipc]
tipc_crypto_rcv+0xd32/0x1ec0 [tipc]
tipc_rcv+0x744/0x1150 [tipc]
This patch fixes it by re-fetching the skb cb from the new allocated skb
after calling tipc_msg_validate().
Fixes: fc1b6d6de2 ("tipc: introduce TIPC encryption & authentication")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/1b1cdba762915325bd8ef9a98d0276eb673df2a5.1669398403.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: More fixes for 6.1
Patch 1 makes sure data received after a close will still be processed
and acked as exepected. This is a regression for a commit introduced
in v5.11.
Patch 2 fixes a kernel deadlock found when working on validating TFO
with a listener MPTCP socket. This is not directly linked to TFO but
it is easier to reproduce the issue with it. This fixes a bug introduced
by a commit from v6.0.
====================
Link: https://lore.kernel.org/r/20221128154239.1999234-1-matthieu.baerts@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All of the subflows of a msk will be orphaned in mptcp_close(), which
means the subflows are in DEAD state. After then, DATA_FIN will be sent,
and the other side will response with a DATA_ACK for this DATA_FIN.
However, if the other side still has pending data, the data that received
on these subflows will not be passed to the msk, as they are DEAD and
subflow_data_ready() will not be called in tcp_data_ready(). Therefore,
these data can't be acked, and they will be retransmitted again and again,
until timeout.
Fix this by setting ssk->sk_socket and ssk->sk_wq to 'NULL', instead of
orphaning the subflows in __mptcp_close(), as Paolo suggested.
Fixes: e16163b6e2 ("mptcp: refactor shutdown and close")
Reviewed-by: Biao Jiang <benbjiang@tencent.com>
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch changes the reported ethtool statistics for the lan9303
family of parts covered by this driver.
The TxUnderRun statistic label is renamed to RxShort to accurately
reflect what stat the device is reporting. I did not reorder the
statistics as that might cause problems with existing user code that
are expecting the stats at a certain offset.
Fixes: a1292595e0 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221128193559.6572-1-jerry.ray@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kalle Valo says:
====================
wireless fixes for v6.1
Third, and hopefully final, set of fixes for v6.1. We are marking the
rsi driver as orphan, have some Information Element parsing fixes to
wilc1000 driver and three small fixes to the stack.
* tag 'wireless-2022-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac8021: fix possible oob access in ieee80211_get_rate_duration
wifi: cfg80211: don't allow multi-BSSID in S1G
wifi: cfg80211: fix buffer overflow in elem comparison
wifi: wilc1000: validate number of channels
wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_CHANNEL_LIST attribute
wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_OPER_CHANNEL attribute
wifi: wilc1000: validate pairwise and authentication suite offsets
MAINTAINERS: mark rsi wifi driver as orphan
====================
Link: https://lore.kernel.org/r/20221128113513.6F459C433C1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
bpf 2022-11-25
We've added 10 non-merge commits during the last 8 day(s) which contain
a total of 7 files changed, 48 insertions(+), 30 deletions(-).
The main changes are:
1) Several libbpf ringbuf fixes related to probing for its availability,
size overflows when mmaping a 2G ringbuf and rejection of invalid
reservationsizes, from Hou Tao.
2) Fix a buggy return pointer in libbpf for attach_raw_tp function,
from Jiri Olsa.
3) Fix a local storage BPF map bug where the value's spin lock field
can get initialized incorrectly, from Xu Kuohai.
4) Two follow-up fixes in kprobe_multi BPF selftests for BPF CI,
from Jiri Olsa.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Make test_bench_attach serial
selftests/bpf: Filter out default_idle from kprobe_multi bench
bpf: Set and check spin lock value in sk_storage_map_test
bpf: Do not copy spin lock field from user in bpf_selem_alloc
libbpf: Check the validity of size in user_ring_buffer__reserve()
libbpf: Handle size overflow for user ringbuf mmap
libbpf: Handle size overflow for ringbuf mmap
libbpf: Use page size as max_entries when probing ring buffer map
bpf, perf: Use subprog name when reporting subprog ksymbol
libbpf: Use correct return pointer in attach_raw_tp
====================
Link: https://lore.kernel.org/r/20221125001034.29473-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit f72cd76b05.
This patch is so broken, it hurts. Apparently no one reviewed it and it
passed the build testing (because the code was compiled out), but it was
obviously never compile-tested, since it produces the following build
error, due to an incomplete conversion where an extra argument was left,
although the function being called was left:
stmmac_main.c: In function ‘stmmac_cmdline_opt’:
stmmac_main.c:7586:28: error: too many arguments to function ‘sysfs_streq’
7586 | } else if (sysfs_streq(opt, "pause:", 6)) {
| ^~~~~~~~~~~
In file included from ../include/linux/bitmap.h:11,
from ../include/linux/cpumask.h:12,
from ../include/linux/smp.h:13,
from ../include/linux/lockdep.h:14,
from ../include/linux/mutex.h:17,
from ../include/linux/notifier.h:14,
from ../include/linux/clk.h:14,
from ../drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:17:
../include/linux/string.h:185:13: note: declared here
185 | extern bool sysfs_streq(const char *s1, const char *s2);
| ^~~~~~~~~~~
What's even worse is that the patch is flat out wrong. The stmmac_cmdline_opt()
function does not parse sysfs input, but cmdline input such as
"stmmaceth=tc:1,pause:1". The pattern of using strsep() followed by
strncmp() for such strings is not unique to stmmac, it can also be found
mainly in drivers under drivers/video/fbdev/.
With strncmp("tc:", 3), the code matches on the "tc:1" token properly.
With sysfs_streq("tc:"), it doesn't.
Fixes: f72cd76b05 ("net: stmmac: use sysfs_streq() instead of strncmp()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20221125105304.3012153-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add CDC-ECM support for LARA-L6.
LARA-L6 module can be configured (by AT interface) in three different
USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial
interface and 1 CDC-ECM virtual network interface
In CDC-ECM mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: CDC-ECM interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Link: https://lore.kernel.org/r/20221124112811.3548-1-davide.tronchin.94@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the kernel receives a route deletion request from user space it
tries to delete a route that matches the route attributes specified in
the request.
If only prefix information is specified in the request, the kernel
should delete the first matching FIB alias regardless of its associated
FIB info. However, an error is currently returned when the FIB info is
backed by a nexthop object:
# ip nexthop add id 1 via 192.0.2.2 dev dummy10
# ip route add 198.51.100.0/24 nhid 1
# ip route del 198.51.100.0/24
RTNETLINK answers: No such process
Fix by matching on such a FIB info when legacy nexthop attributes are
not specified in the request. An earlier check already covers the case
where a nexthop ID is specified in the request.
Add tests that cover these flows. Before the fix:
# ./fib_nexthops.sh -t ipv4_fcnal
...
TEST: Delete route when not specifying nexthop attributes [FAIL]
Tests passed: 11
Tests failed: 1
After the fix:
# ./fib_nexthops.sh -t ipv4_fcnal
...
TEST: Delete route when not specifying nexthop attributes [ OK ]
Tests passed: 12
Tests failed: 0
No regressions in other tests:
# ./fib_nexthops.sh
...
Tests passed: 228
Tests failed: 0
# ./fib_tests.sh
...
Tests passed: 186
Tests failed: 0
Cc: stable@vger.kernel.org
Reported-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Jonas Gorski <jonas.gorski@gmail.com>
Fixes: 493ced1ac4 ("ipv4: Allow routes to use nexthop objects")
Fixes: 6bf92d70e6 ("net: ipv4: fix route with nexthop object delete warning")
Fixes: 61b91eb33a ("ipv4: Handle attempt to delete multipath route when fib_info contains an nh reference")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20221124210932.2470010-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The EFI page table is initially created as a copy of the kernel page table.
With VMAP_STACK enabled, kernel stacks are allocated in the vmalloc area:
if the stack is allocated in a new PGD (one that was not present at the
moment of the efi page table creation or not synced in a previous vmalloc
fault), the kernel will take a trap when switching to the efi page table
when the vmalloc kernel stack is accessed, resulting in a kernel panic.
Fix that by updating the efi kernel mappings before switching to the efi
page table.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes: b91540d52a ("RISC-V: Add EFI runtime services")
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20221121133303.1782246-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull devicetree fix from Rob Herring:
- Fix DT node reference counting for of_fwnode_get_reference_args()
exit path
* tag 'devicetree-fixes-for-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: property: decrement node refcount in of_fwnode_get_reference_args()
Pull tracing fixes from Steven Rostedt:
- Fix osnoise duration type to 64bit not 32bit
- Have histogram triggers be able to handle an unexpected NULL pointer
for the record event, which can happen when the histogram first
starts up
- Clear out ring buffers when dynamic events are removed, as the type
that is saved in the ring buffer is used to read the event, and a
stale type that is reused by another event could cause use after free
issues
- Trivial comment fix
- Fix memory leak in user_event_create()
* tag 'trace-v6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Free buffers when a used dynamic event is removed
tracing: Add tracing_reset_all_online_cpus_unlocked() function
tracing: Fix race where histograms can be called before the event
tracing/osnoise: Fix duration type
tracing/user_events: Fix memory leak in user_event_create()
tracing/hist: add in missing * in comment blocks
Pull fuse fix from Miklos Szeredi:
"Fix a regression introduced in -rc4"
* tag 'fuse-fixes-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: lock inode unconditionally in fuse_fallocate()
