[ Upstream commit c1f848f121 ]
When the tdm lane mask is computed, the driver currently fills the 1st lane
before moving on to the next. If the stream has less channels than the
lanes can accommodate, slots will be disabled on the last lanes.
Unfortunately, the HW distribute channels in a different way. It distribute
channels in pair on each lanes before moving on the next slots.
This difference leads to problems if a device has an interface with more
than 1 lane and with more than 2 slots per lane.
For example: a playback interface with 2 lanes and 4 slots each (total 8
slots - zero based numbering)
- Playing a 8ch stream:
- All slots activated by the driver
- channel #2 will be played on lane #1 - slot #0 following HW placement
- Playing a 4ch stream:
- Lane #1 disabled by the driver
- channel #2 will be played on lane #0 - slot #2
This behaviour is obviously not desirable.
Change the way slots are activated on the TDM lanes to follow what the HW
does and make sure each channel always get mapped to the same slot/lane.
Fixes: 1a11d88f49 ("ASoC: meson: add tdm formatter base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20230809171931.1244502-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a2b96e42a ]
If the tuning step is not set, the tuning step is set to 1.
For some sd cards, the following Tuning timeout will occur.
Tuning failed, falling back to fixed sampling clock
So set the default tuning step. This refers to the NXP vendor's
commit below:
https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/
arch/arm/boot/dts/imx6sx.dtsi#L1108-L1109
Fixes: 1e336aa0c0 ("mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be18293e47 ]
If the tuning step is not set, the tuning step is set to 1.
For some sd cards, the following Tuning timeout will occur.
Tuning failed, falling back to fixed sampling clock
mmc0: Tuning failed, falling back to fixed sampling clock
So set the default tuning step. This refers to the NXP vendor's
commit below:
https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/
arch/arm/boot/dts/imx7s.dtsi#L1216-L1217
Fixes: 1e336aa0c0 ("mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9f5cd85f1 ]
Currently the dtbs_check generates warnings like this:
$nodename:0: 'dma-apbh@110000' does not match '^dma-controller(@.*)?$'
So fix all affected dma-apbh node names.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stable-dep-of: be18293e47 ("ARM: dts: imx: Set default tuning step for imx7d usdhc")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9928f0a9e7 ]
Drop "interrupt-names" property, since it is broken. The drivers/dma/mxs-dma.c
in Linux kernel does not use it, the property contains duplicate array entries
in existing DTs, and even malformed entries (gmpi, should have been gpmi). Get
rid of that optional property altogether.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stable-dep-of: be18293e47 ("ARM: dts: imx: Set default tuning step for imx7d usdhc")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34539b442b ]
The am335x devices started producing boot errors for resetting musb module
in because of subtle timing changes:
Unhandled fault: external abort on non-linefetch (0x1008)
...
sysc_poll_reset_sysconfig from sysc_reset+0x109/0x12
sysc_reset from sysc_probe+0xa99/0xeb0
...
The fix is to flush posted write after enable before reset during
probe. Note that some devices also need to specify the delay after enable
with ti,sysc-delay-us, but this is not needed for musb on am335x based on
my tests.
Reported-by: kernelci.org bot <bot@kernelci.org>
Closes: https://storage.kernelci.org/next/master/next-20230614/arm/multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y/gcc-10/lab-cip/baseline-beaglebone-black.html
Fixes: 596e795569 ("bus: ti-sysc: Add support for software reset")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab4d309d87 ]
At least display susbsystem (DSS) has modules with no sysconfig registers
and rely on custom function for module reset handling. Let's make reset
work with that too.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Stable-dep-of: 34539b442b ("bus: ti-sysc: Flush posted write on enable before reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d0c88e84e ]
The status of global socket memory pressure is updated when:
a) __sk_mem_raise_allocated():
enter: sk_memory_allocated(sk) > sysctl_mem[1]
leave: sk_memory_allocated(sk) <= sysctl_mem[0]
b) __sk_mem_reduce_allocated():
leave: sk_under_memory_pressure(sk) &&
sk_memory_allocated(sk) < sysctl_mem[0]
So the conditions of leaving global pressure are inconstant, which
may lead to the situation that one pressured net-memcg prevents the
global pressure from being cleared when there is indeed no global
pressure, thus the global constrains are still in effect unexpectedly
on the other sockets.
This patch fixes this by ignoring the net-memcg's pressure when
deciding whether should leave global memory pressure.
Fixes: e1aab161e0 ("socket: initial cgroup code.")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20230816091226.1542-1-wuyun.abel@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23d775f12d ]
If the switch is reset during active EEPROM transactions, as in
just after an SoC reset after power up, the I2C bus transaction
may be cut short leaving the EEPROM internal I2C state machine
in the wrong state. When the switch is reset again, the bad
state machine state may result in data being read from the wrong
memory location causing the switch to enter unexpected mode
rendering it inoperational.
Fixes: a3dcb3e7e7 ("net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset")
Signed-off-by: Alfred Lee <l00g33k@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230815001323.24739-1-l00g33k@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dafcbce071 ]
Similar to commit 01f4fd2708 ("bonding: Fix incorrect deletion of
ETH_P_8021AD protocol vid from slaves"), we can trigger BUG_ON(!vlan_info)
in unregister_vlan_dev() with the following testcase:
# ip netns add ns1
# ip netns exec ns1 ip link add team1 type team
# ip netns exec ns1 ip link add team_slave type veth peer veth2
# ip netns exec ns1 ip link set team_slave master team1
# ip netns exec ns1 ip link add link team_slave name team_slave.10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link add link team1 name team1.10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link set team_slave nomaster
# ip netns del ns1
Add S-VLAN tag related features support to team driver. So the team driver
will always propagate the VLAN info to its slaves.
Fixes: 8ad227ff89 ("net: vlan: add 802.1ad support")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230814032301.2804971-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23185c6aed ]
Do not allow to insert elements from datapath to objects maps.
Fixes: 8aeff920dc ("netfilter: nf_tables: add stateful object reference to set elements")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 855067defa ]
This test verifies whether the encapsulated packets have the correct
configured TTL. It does so by sending ICMP packets through the test
topology and mirroring them to a gretap netdevice. On a busy host
however, more than just the test ICMP packets may end up flowing
through the topology, get mirrored, and counted. This leads to
potential spurious failures as the test observes much more mirrored
packets than the sent test packets, and assumes a bug.
Fix this by tightening up the mirror action match. Change it from
matchall to a flower classifier matching on ICMP packets specifically.
Fixes: 45315673e0 ("selftests: forwarding: Test changes in mirror-to-gretap")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6018a26627 ]
When ip_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ip_vti device sends IPv6 packets.
As commit f855691975 ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
Fixes: f855691975 ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fd41f1ba6 ]
When ipv6_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ipv6_vti device sends IPv6 packets.
The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr ffff88802e08edc2 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-next-20230707-00001-g84e2cad7f979 #410
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
vti6_tnl_xmit+0x3e6/0x1ee0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
Allocated by task 9176:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
netlink_sendmsg+0x9b1/0xe30
sock_sendmsg+0xde/0x190
____sys_sendmsg+0x739/0x920
___sys_sendmsg+0x110/0x1b0
__sys_sendmsg+0xf7/0x1c0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 9176:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2b/0x40
____kasan_slab_free+0x160/0x1c0
slab_free_freelist_hook+0x11b/0x220
kmem_cache_free+0xf0/0x490
skb_free_head+0x17f/0x1b0
skb_release_data+0x59c/0x850
consume_skb+0xd2/0x170
netlink_unicast+0x54f/0x7f0
netlink_sendmsg+0x926/0xe30
sock_sendmsg+0xde/0x190
____sys_sendmsg+0x739/0x920
___sys_sendmsg+0x110/0x1b0
__sys_sendmsg+0xf7/0x1c0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff88802e08ed00
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 194 bytes inside of
freed 640-byte region [ffff88802e08ed00, ffff88802e08ef80)
As commit f855691975 ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
Fixes: f855691975 ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53223f2ed1 ]
When the xfrm device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when the xfrm device sends IPv6 packets.
The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr ffff8881111458ef by task swapper/3/0
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.4.0-next-20230707 #409
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
xfrmi_xmit+0x173/0x1ca0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:intel_idle_hlt+0x23/0x30
Code: 1f 84 00 00 00 00 00 f3 0f 1e fa 41 54 41 89 d4 0f 1f 44 00 00 66 90 0f 1f 44 00 00 0f 00 2d c4 9f ab 00 0f 1f 44 00 00 fb f4 <fa> 44 89 e0 41 5c c3 66 0f 1f 44 00 00 f3 0f 1e fa 41 54 41 89 d4
RSP: 0018:ffffc90000197d78 EFLAGS: 00000246
RAX: 00000000000a83c3 RBX: ffffe8ffffd09c50 RCX: ffffffff8a22d8e5
RDX: 0000000000000001 RSI: ffffffff8d3f8080 RDI: ffffe8ffffd09c50
RBP: ffffffff8d3f8080 R08: 0000000000000001 R09: ffffed1026ba6d9d
R10: ffff888135d36ceb R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff8d3f8100 R14: 0000000000000001 R15: 0000000000000000
cpuidle_enter_state+0xd3/0x6f0
cpuidle_enter+0x4e/0xa0
do_idle+0x2fe/0x3c0
cpu_startup_entry+0x18/0x20
start_secondary+0x200/0x290
secondary_startup_64_no_verify+0x167/0x16b
</TASK>
Allocated by task 939:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
inet6_ifa_notify+0x118/0x230
__ipv6_ifa_notify+0x177/0xbe0
addrconf_dad_completed+0x133/0xe00
addrconf_dad_work+0x764/0x1390
process_one_work+0xa32/0x16f0
worker_thread+0x67d/0x10c0
kthread+0x344/0x440
ret_from_fork+0x1f/0x30
The buggy address belongs to the object at ffff888111145800
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 239 bytes inside of
freed 640-byte region [ffff888111145800, ffff888111145a80)
As commit f855691975 ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
Fixes: f855691975 ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75065a8929 ]
When running xfrm_state_walk_init(), the xfrm_address_filter being used
is okay to have a splen/dplen that equals to sizeof(xfrm_address_t)<<3.
This commit replaces >= to > to make sure the boundary checking is
correct.
Fixes: 37bd22420f ("af_key: pfkey_dump needs parameter validation")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 29eefa6d0d upstream.
Pausing and canceling balance can race to interrupt balance lead to BUG_ON
panic in btrfs_cancel_balance. The BUG_ON condition in btrfs_cancel_balance
does not take this race scenario into account.
However, the race condition has no other side effects. We can fix that.
Reproducing it with panic trace like this:
kernel BUG at fs/btrfs/volumes.c:4618!
RIP: 0010:btrfs_cancel_balance+0x5cf/0x6a0
Call Trace:
<TASK>
? do_nanosleep+0x60/0x120
? hrtimer_nanosleep+0xb7/0x1a0
? sched_core_clone_cookie+0x70/0x70
btrfs_ioctl_balance_ctl+0x55/0x70
btrfs_ioctl+0xa46/0xd20
__x64_sys_ioctl+0x7d/0xa0
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Race scenario as follows:
> mutex_unlock(&fs_info->balance_mutex);
> --------------------
> .......issue pause and cancel req in another thread
> --------------------
> ret = __btrfs_balance(fs_info);
>
> mutex_lock(&fs_info->balance_mutex);
> if (ret == -ECANCELED && atomic_read(&fs_info->balance_pause_req)) {
> btrfs_info(fs_info, "balance: paused");
> btrfs_exclop_balance(fs_info, BTRFS_EXCLOP_BALANCE_PAUSED);
> }
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: xiaoshoukui <xiaoshoukui@ruijie.com.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 282069845a upstream.
Do not read the data register to clear the error flags for lpuart32
platforms, the additional read may cause the receive FIFO underflow
since the DMA has already read the data register.
Actually all lpuart32 platforms support write 1 to clear those error
bits, let's use this method to better clear the error flags.
Fixes: 42b68768e5 ("serial: fsl_lpuart: DMA support for 32-bit variant")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20230801022304.24251-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f3175979e upstream.
With hardened usercopy enabled (CONFIG_HARDENED_USERCOPY=y), using the
/proc/powerpc/rtas/firmware_update interface to prepare a system
firmware update yields a BUG():
kernel BUG at mm/usercopy.c:102!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 0 PID: 2232 Comm: dd Not tainted 6.5.0-rc3+ #2
Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 of:IBM,FW860.50 (SV860_146) hv:phyp pSeries
NIP: c0000000005991d0 LR: c0000000005991cc CTR: 0000000000000000
REGS: c0000000148c76a0 TRAP: 0700 Not tainted (6.5.0-rc3+)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002242 XER: 0000000c
CFAR: c0000000001fbd34 IRQMASK: 0
[ ... GPRs omitted ... ]
NIP usercopy_abort+0xa0/0xb0
LR usercopy_abort+0x9c/0xb0
Call Trace:
usercopy_abort+0x9c/0xb0 (unreliable)
__check_heap_object+0x1b4/0x1d0
__check_object_size+0x2d0/0x380
rtas_flash_write+0xe4/0x250
proc_reg_write+0xfc/0x160
vfs_write+0xfc/0x4e0
ksys_write+0x90/0x160
system_call_exception+0x178/0x320
system_call_common+0x160/0x2c4
The blocks of the firmware image are copied directly from user memory
to objects allocated from flash_block_cache, so flash_block_cache must
be created using kmem_cache_create_usercopy() to mark it safe for user
access.
Fixes: 6d07d1cd30 ("usercopy: Restrict non-usercopy caches to size 0")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[mpe: Trim and indent oops]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230810-rtas-flash-vs-hardened-usercopy-v2-1-dcf63793a938@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0872b2c0ab upstream.
in mmphw_probe(), check the return value of clk_prepare_enable()
and return the error code if clk_prepare_enable() returns an
unexpected value.
Fixes: d63028c389 ("video: mmp display controller support")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4caf4cb1ea upstream.
iproc_i2c_rd_reg() and iproc_i2c_wr_reg() are called from both
interrupt context (e.g. bcm_iproc_i2c_isr) and process context
(e.g. bcm_iproc_i2c_suspend). Therefore, interrupts should be
disabled to avoid potential deadlock. To prevent this scenario,
use spin_lock_irqsave().
Fixes: 9a10387280 ("i2c: iproc: add NIC I2C support")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 55c91fedd0 ]
vm_dev has a separate lifecycle because it has a 'struct device'
embedded. Thus, having a release callback for it is correct.
Allocating the vm_dev struct with devres totally breaks this protection,
though. Instead of waiting for the vm_dev release callback, the memory
is freed when the platform_device is removed. Resulting in a
use-after-free when finally the callback is to be called.
To easily see the problem, compile the kernel with
CONFIG_DEBUG_KOBJECT_RELEASE and unbind with sysfs.
The fix is easy, don't use devres in this case.
Found during my research about object lifetime problems.
Fixes: 7eb781b1bb ("virtio_mmio: add cleanup for virtio_mmio_probe")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-Id: <20230629120526.7184-1-wsa+renesas@sang-engineering.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c64eb62cfc ]
Use devm_platform_ioremap_resource() to simplify code, which
contains platform_get_resource, devm_request_mem_region and
devm_ioremap.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stable-dep-of: 55c91fedd0 ("virtio-mmio: don't break lifecycle of vm_dev")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f75546f58a ]
If the client is calling TEST_STATEID, then it is because some event
occurred that requires it to check all the stateids for validity and
call FREE_STATEID on the ones that have been revoked. In this case,
either the stateid exists in the list of stateids associated with that
nfs4_client, in which case it should be tested, or it does not. There
are no additional conditions to be considered.
Reported-by: "Frank Ch. Eigler" <fche@redhat.com>
Fixes: 7df302f75e ("NFSD: TEST_STATEID should not return NFS4ERR_STALE_STATEID")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 663e36f076 ]
It's normal for a client to test a stateid from a previous instance,
e.g. after a network partition.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: f75546f58a ("nfsd: Remove incorrect check in nfsd4_validate_stateid")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e860947d8 ]
gma_flag was set at the time of GMA command request but it should
only be set after getting successful response. Movinng this flag
setting in GMA response handler.
This flag is used mainly for not repeating GMA command once
received MAC address.
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 790071347a ("net/ncsi: change from ndo_set_mac_address to dev_set_mac_address")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8565a45d08 ]
In preparation to allow event probes to use the process_fetch_insn()
callback in trace_probe_tmpl.h, change the data passed to it from a
pointer to pt_regs, as the event probe will not be using regs, and make it
a void pointer instead.
Update the process_fetch_insn() callers for kprobe and uprobe events to
have the regs defined in the function and just typecast the void pointer
parameter.
Link: https://lkml.kernel.org/r/20210819041842.291622924@goodmis.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Stable-dep-of: e38e2c6a9e ("tracing/probes: Fix to update dynamic data counter if fetcharg uses it")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2df53c580 ]
The driver overrides the error codes and IRQ0 returned by platform_get_irq()
to -EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the error
codes upstream. Since commit ce753ad154 ("platform: finally disallow IRQ0
in platform_get_irq() and its ilk") IRQ0 is no longer returned by those APIs,
so we now can safely ignore it...
Fixes: 2408a08583 ("mmc: sunxi-mmc: Handle return value of platform_get_irq")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230617203622.6812-12-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71150ac125 ]
The driver overrides the error codes and IRQ0 returned by platform_get_irq()
to -EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the error
codes upstream. Since commit ce753ad154 ("platform: finally disallow IRQ0
in platform_get_irq() and its ilk") IRQ0 is no longer returned by those APIs,
so we now can safely ignore it...
Fixes: 660fc733bd ("mmc: bcm2835: Add new driver for the sdhost controller.")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-2-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2d6935422 ]
The Qualcomm dwc3 glue driver is currently accessing the driver data of
the child core device during suspend and on wakeup interrupts. This is
clearly a bad idea as the child may not have probed yet or could have
been unbound from its driver.
The first such layering violation was part of the initial version of the
driver, but this was later made worse when the hack that accesses the
driver data of the grand child xhci device to configure the wakeup
interrupts was added.
Fixing this properly is not that easily done, so add a sanity check to
make sure that the child driver data is non-NULL before dereferencing it
for now.
Note that this relies on subtleties like the fact that driver core is
making sure that the parent is not suspended while the child is probing.
Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/all/20230325165217.31069-4-manivannan.sadhasivam@linaro.org/
Fixes: d9152161b4 ("usb: dwc3: Add Qualcomm DWC3 glue layer driver")
Fixes: 6895ea55c3 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend")
Cc: stable@vger.kernel.org # 3.18: a872ab303d: "usb: dwc3: qcom: fix use-after-free on runtime-PM wakeup"
Cc: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
Cc: Krishna Kurapati <quic_kriskura@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Message-ID: <20230607100540.31045-2-johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d374b2090 ]
There is a repeated pattern in multiple drivers where they want to switch
the bandwidth between zero and some other value. This is happening often
in the suspend/resume callbacks. Let's add helper functions to enable and
disable the path, so that callers don't have to take care of remembering
the bandwidth values and handle this in the framework instead.
With this patch the users can call icc_disable() and icc_enable() to lower
their bandwidth request to zero and then restore it back to it's previous
value.
Suggested-by: Evan Green <evgreen@chromium.org>
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20200507120846.8354-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Stable-dep-of: d2d6935422 ("USB: dwc3: qcom: fix NULL-deref on suspend")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd018a9cf9 ]
Move the interconnect framework internal structs into a separate file,
so that it can be included and used by ftrace code. This will allow us
to expose some more useful information in the traces.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Stable-dep-of: d2d6935422 ("USB: dwc3: qcom: fix NULL-deref on suspend")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d6a0e4197 ]
Since we may hold gic_lock in hardirq context, use raw spinlock
makes more sense given that it is for low-level interrupt handling
routine and the critical section is small.
Fixes BUG:
[ 0.426106] =============================
[ 0.426257] [ BUG: Invalid wait context ]
[ 0.426422] 6.3.0-rc7-next-20230421-dirty #54 Not tainted
[ 0.426638] -----------------------------
[ 0.426766] swapper/0/1 is trying to lock:
[ 0.426954] ffffffff8104e7b8 (gic_lock){....}-{3:3}, at: gic_set_type+0x30/08
Fixes: 95150ae8b3 ("irqchip: mips-gic: Implement irq_set_type callback")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230424103156.66753-3-jiaxun.yang@flygoat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd098a0e03 ]
The MIPS GIC driver uses irq_cpu_online() to go and program the
per-CPU interrupts. However, this method iterates over all IRQs
in the system, despite only 3 per-CPU interrupts being of interest.
Let's be terribly bold and do the iteration ourselves. To ensure
mutual exclusion, hold the gic_lock spinlock that is otherwise
taken while dealing with these interrupts.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20211021170414.3341522-3-maz@kernel.org
Stable-dep-of: 3d6a0e4197 ("irqchip/mips-gic: Use raw spinlock for gic_lock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81302b1c7c ]
It's reported that the recording started right after the driver probe
doesn't work properly, and it turned out that this is related with the
codec auto-suspend. Namely, after the probe phase, the usage count
goes zero, and the auto-suspend is programmed, but the codec is kept
still active until the auto-suspend expiration. When an application
(e.g. alsactl) updates the mixer values at this moment, the values are
cached but not actually written. Then, starting arecord thereafter
also results in the silence because of the missing unmute.
The root cause is the handling of "lazy update" mode; when a mixer
value is updated *after* the suspend, it should update only the cache
and exits. At the resume, the cached value is written to the device,
in turn. The problem is that the current code misinterprets the state
of auto-suspend as if it were already suspended.
Although we can add the check of the actual device state after
pm_runtime_get_if_in_use() for catching the missing state, this won't
suffice; the second call of regmap_update_bits_check() will skip
writing the register because the cache has been already updated by the
first call. So we'd need fixes in two different places.
OTOH, a simpler fix is to replace pm_runtime_get_if_in_use() with
pm_runtime_get_if_active() (with ign_usage_count=true). This change
implies that the driver takes the pm refcount if the device is still
in ACTIVE state and continues the processing. A small caveat is that
this will leave the auto-suspend timer. But, since the timer callback
itself checks the device state and aborts gracefully when it's active,
this won't be any substantial problem.
Long story short: we address the missing register-write problem just
by replacing the pm_runtime_*() call in snd_hda_keep_power_up().
Fixes: fc4f000bf8 ("ALSA: hda - Fix unexpected resume through regmap code path")
Reported-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Closes: https://lore.kernel.org/r/a7478636-af11-92ab-731c-9b13c582a70d@linux.intel.com
Suggested-by: Cezary Rojewski <cezary.rojewski@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230518113520.15213-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c111566bea ]
pm_runtime_get_if_in_use() bumps up the PM-runtime usage count if it
is not equal to zero and the device's PM-runtime status is 'active'.
This works for drivers that do not use autoidle, but for those that
do, the function returns zero even when the device is active.
In order to maintain sane device state while the device is powered on
in the hope that it'll be needed, pm_runtime_get_if_active(dev, true)
returns a positive value if the device's PM-runtime status is 'active'
when it is called, in which case it also increments the device's usage
count.
If the second argument of pm_runtime_get_if_active() is 'false', the
function behaves just like pm_runtime_get_if_in_use(), so redefine
the latter as a wrapper around the former.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 81302b1c7c ("ALSA: hda: Fix unhandled register update during auto-suspend period")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d229290689 ]
Add tracepoints to remaining places where device's power.usage_count
is changed.
This helps debugging where and why autosuspend is prevented.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 81302b1c7c ("ALSA: hda: Fix unhandled register update during auto-suspend period")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccc62b8277 ]
commit b9c6ff94e4 ("iommu/amd: Re-factor guest virtual APIC
(de-)activation code") while refactoring guest virtual APIC
activation/de-activation code, stored information for activate/de-activate
in "struct amd_ir_data". It used 32-bit integer data type for storing the
"Guest Virtual APIC Table Root Pointer" (ga_root_ptr), though the
"ga_root_ptr" is actually a 40-bit field in IRTE (Interrupt Remapping
Table Entry).
This causes interrupts from PCIe devices to not reach the guest in the case
of PCIe passthrough with SME (Secure Memory Encryption) enabled as _SME_
bit in the "ga_root_ptr" is lost before writing it to the IRTE.
Fix it by using 64-bit data type for storing the "ga_root_ptr". While at
that also change the data type of "ga_tag" to u32 in order to match
the IOMMU spec.
Fixes: b9c6ff94e4 ("iommu/amd: Re-factor guest virtual APIC (de-)activation code")
Cc: stable@vger.kernel.org # v5.4+
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Link: https://lore.kernel.org/r/20230405130317.9351-1-kvijayab@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
