commit 80cbee810e4e13cdbd3ae9654e9ecddf17f3e828 upstream.
The V3D driver still relies on `drm_sched_increase_karma()` and
`drm_sched_resubmit_jobs()` for resubmissions when a timeout occurs.
The function `drm_sched_increase_karma()` marks the job as guilty, while
`drm_sched_resubmit_jobs()` sets an error (-ECANCELED) in the DMA fence of
that guilty job.
Because of this, we must check whether the job’s DMA fence has been
flagged with an error before executing the job. Otherwise, the same guilty
job may be resubmitted indefinitely, causing repeated GPU resets.
This patch adds a check for an error on the job's fence to prevent running
a guilty job that was previously flagged when the GPU timed out.
Note that the CPU and CACHE_CLEAN queues do not require this check, as
their jobs are executed synchronously once the DRM scheduler starts them.
Cc: stable@vger.kernel.org
Fixes: d223f98f02 ("drm/v3d: Add support for compute shader dispatch.")
Fixes: 1584f16ca9 ("drm/v3d: Add support for submitting jobs to the TFU.")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-v3d-gpu-reset-fixes-v4-1-c1e780d8e096@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd99d6ed20234b83d65b9c5417794343577cf3e5 upstream.
After a suspend/resume cycle on a down interface, it will come up as
ERROR-ACTIVE.
$ ip -details -s -s a s dev flexcan0
3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10
link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
can state STOPPED (berr-counter tx 0 rx 0) restart-ms 1000
$ sudo systemctl suspend
$ ip -details -s -s a s dev flexcan0
3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10
link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
can state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 1000
And only set CAN state to CAN_STATE_ERROR_ACTIVE when resume process
has no issue, otherwise keep in CAN_STATE_SLEEPING as suspend did.
Fixes: 4de349e786 ("can: flexcan: fix resume function")
Cc: stable@vger.kernel.org
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20250314110145.899179-1-haibo.chen@nxp.com
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Closes: https://lore.kernel.org/all/20250314-married-polar-elephant-b15594-mkl@pengutronix.de
[mkl: add newlines]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d22a122ffb116c3cf78053e812b8b21f8852ee9 upstream.
Commit 7fdaf8966a ("can: ucan: use strscpy() to instead of strncpy()")
unintentionally introduced a one byte out of bound read on strscpy()'s
source argument (which is kind of ironic knowing that strscpy() is meant
to be a more secure alternative :)).
Let's consider below buffers:
dest[len + 1]; /* will be NUL terminated */
src[len]; /* may not be NUL terminated */
When doing:
strncpy(dest, src, len);
dest[len] = '\0';
strncpy() will read up to len bytes from src.
On the other hand:
strscpy(dest, src, len + 1);
will read up to len + 1 bytes from src, that is to say, an out of bound
read of one byte will occur on src if it is not NUL terminated. Note
that the src[len] byte is never copied, but strscpy() still needs to
read it to check whether a truncation occurred or not.
This exact pattern happened in ucan.
The root cause is that the source is not NUL terminated. Instead of
doing a copy in a local buffer, directly NUL terminate it as soon as
usb_control_msg() returns. With this, the local firmware_str[] variable
can be removed.
On top of this do a couple refactors:
- ucan_ctl_payload->raw is only used for the firmware string, so
rename it to ucan_ctl_payload->fw_str and change its type from u8 to
char.
- ucan_device_request_in() is only used to retrieve the firmware
string, so rename it to ucan_get_fw_str() and refactor it to make it
directly handle all the string termination logic.
Reported-by: syzbot+d7d8c418e8317899e88c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-can/67b323a4.050a0220.173698.002b.GAE@google.com/
Fixes: 7fdaf8966a ("can: ucan: use strscpy() to instead of strncpy()")
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250218143515.627682-2-mailhol.vincent@wanadoo.fr
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1dba0a37644ed3022558165bbb5cb9bda540eaf7 upstream.
There are a total of 96 AFL pages and each page has 16 entries with
registers CFDGAFLIDr, CFDGAFLMr, CFDGAFLP0r, CFDGAFLP1r holding
the rule entries (r = 0..15).
Currently, RCANFD_GAFL* macros use a start variable to find AFL entries,
which is incorrect as the testing on RZ/G3E shows ch1 and ch4
gets a start value of 0 and the register contents are overwritten.
Fix this issue by using rule_entry corresponding to the channel
to find the page entries in the AFL list.
Fixes: dd3bd23eb4 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver")
Cc: stable@vger.kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250307170330.173425-3-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 285df995f90e3d61d97f327d34b9659d92313314 upstream.
On the GTA04A5 writing a reset command to the gyroscope causes IRQ
storms because NACK IRQs are enabled and therefore triggered but not
acked.
Sending a reset command to the gyroscope by
i2cset 1 0x69 0x14 0xb6
with an additional debug print in the ISR (not the thread) itself
causes
[ 363.353515] i2c i2c-1: ioctl, cmd=0x720, arg=0xbe801b00
[ 363.359039] omap_i2c 48072000.i2c: addr: 0x0069, len: 2, flags: 0x0, stop: 1
[ 363.366180] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x1110)
[ 363.371673] omap_i2c 48072000.i2c: IRQ (ISR = 0x0010)
[ 363.376892] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
[ 363.382263] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
[ 363.387664] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
repeating till infinity
[...]
(0x2 = NACK, 0x100 = Bus free, which is not enabled)
Apparently no other IRQ bit gets set, so this stalls.
Do not ignore enabled interrupts and make sure they are acked.
If the NACK IRQ is not needed, it should simply not enabled, but
according to the above log, caring about it is necessary unless
the Bus free IRQ is enabled and handled. The assumption that is
will always come with a ARDY IRQ, which was the idea behind
ignoring it, proves wrong.
It is true for simple reads from an unused address.
To still avoid the i2cdetect trouble which is the reason for
commit c770657bd2 ("i2c: omap: Fix standard mode false ACK readings"),
avoid doing much about NACK in omap_i2c_xfer_data() which is used
by both IRQ mode and polling mode, so also the false detection fix
is extended to polling usage and IRQ storms are avoided.
By changing this, the hardirq handler is not needed anymore to filter
stuff.
The mentioned gyro reset now just causes a -ETIMEDOUT instead of
hanging the system.
Fixes: c770657bd2 ("i2c: omap: Fix standard mode false ACK readings").
CC: stable@kernel.org
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250228140420.379498-1-andreas@kemnade.info
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 90a7138619a0c55e2aefaad27b12ffc2ddbeed78 ]
Previous commit 8b5c171bb3 ("neigh: new unresolved queue limits")
introduces new netlink attribute NDTPA_QUEUE_LENBYTES to represent
approximative value for deprecated QUEUE_LEN. However, it forgot to add
the associated nla_policy in nl_ntbl_parm_policy array. Fix it with one
simple NLA_U32 type policy.
Fixes: 8b5c171bb3 ("neigh: new unresolved queue limits")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://patch.msgid.link/20250315165113.37600-1-linma@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 986ffb3a57c5650fb8bf6d59a8f0f07046abfeb6 ]
This patch acts as a parachute, catch all solution, by detecting
recursion loops in lwtunnel users and taking care of them (e.g., a loop
between routes, a loop within the same route, etc). In general, such
loops are the consequence of pathological configurations. Each lwtunnel
user is still free to catch such loops early and do whatever they want
with them. It will be the case in a separate patch for, e.g., seg6 and
seg6_local, in order to provide drop reasons and update statistics.
Another example of a lwtunnel user taking care of loops is ioam6, which
has valid use cases that include loops (e.g., inline mode), and which is
addressed by the next patch in this series. Overall, this patch acts as
a last resort to catch loops and drop packets, since we don't want to
leak something unintentionally because of a pathological configuration
in lwtunnels.
The solution in this patch reuses dev_xmit_recursion(),
dev_xmit_recursion_inc(), and dev_xmit_recursion_dec(), which seems fine
considering the context.
Closes: https://lore.kernel.org/netdev/2bc9e2079e864a9290561894d2a602d6@akamai.com/
Closes: https://lore.kernel.org/netdev/Z7NKYMY7fJT5cYWu@shredder/
Fixes: ffce41962e ("lwtunnel: support dst output redirect function")
Fixes: 2536862311 ("lwt: Add support to redirect dst.input")
Fixes: 14972cbd34 ("net: lwtunnel: Handle fragmentation")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250314120048.12569-2-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a81fc3480bf5dbe2bf80e278c440770f6ba2692 ]
While creating a new IPv6, we could get a weird -ENOMEM when
RTA_NH_ID is set and either of the conditions below is true:
1) CONFIG_IPV6_SUBTREES is enabled and rtm_src_len is specified
2) nexthop_get() fails
e.g.)
# strace ip -6 route add fe80::dead:beef:dead:beef nhid 1 from ::
recvmsg(3, {msg_iov=[{iov_base=[...[
{error=-ENOMEM, msg=[... [...]]},
[{nla_len=49, nla_type=NLMSGERR_ATTR_MSG}, "Nexthops can not be used with so"...]
]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148
Let's set err explicitly after ip_fib_metrics_init() in
ip6_route_info_create().
Fixes: f88d8ea67f ("ipv6: Plumb support for nexthop object in a fib6_info")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250312013854.61125-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9740890ee20e01f99ff1dde84c63dcf089fabb98 ]
fib_check_nh_v6_gw() expects that fib6_nh_init() cleans up everything
when it fails.
Commit 7dd73168e2 ("ipv6: Always allocate pcpu memory in a fib6_nh")
moved fib_nh_common_init() before alloc_percpu_gfp() within fib6_nh_init()
but forgot to add cleanup for fib6_nh->nh_common.nhc_pcpu_rth_output in
case it fails to allocate fib6_nh->rt6i_pcpu, resulting in memleak.
Let's call fib_nh_common_release() and clear nhc_pcpu_rth_output in the
error path.
Note that we can remove the fib6_nh_release() call in nh_create_ipv6()
later in net-next.git.
Fixes: 7dd73168e2 ("ipv6: Always allocate pcpu memory in a fib6_nh")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250312010333.56001-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45d5fe1c53baaed1fb3043f45d1e15ebb4bbe86a ]
Chips in the DA850 family need to have ARCH_DAVINCI_DA8XX to be selected
in order to enable some peripheral drivers.
This was accidentally removed in a previous commit.
Fixes: dec85a9516 ("ARM: davinci: clean up platform support")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84a833d90635e4b846333e2df0ae72f9cbecac39 ]
When slicing a BO, we need to iterate through the BO's sgt to find the
right pieces to construct the slice. Some of the data types chosen for
this process are incorrectly too small, and can overflow. This can
result in the incorrect slice construction, which can lead to data
corruption in workload execution.
The device can only handle 32-bit sized transfers, and the scatterlist
struct only supports 32-bit buffer sizes, so our upper limit for an
individual transfer is an unsigned int. Using an int is incorrect due to
the reservation of the sign bit. Upgrade the length of a scatterlist
entry and the offsets into a scatterlist entry to unsigned int for a
correct representation.
While each transfer may be limited to 32-bits, the overall BO may exceed
that size. For counting the total length of the BO, we need a type that
can represent the largest allocation possible on the system. That is the
definition of size_t, so use it.
Fixes: ff13be8303 ("accel/qaic: Add datapath")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Troy Hanson <quic_thanson@quicinc.com>
Reviewed-by: Youssef Samir <quic_yabdulra@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306171959.853466-1-jeff.hugo@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6685a96c8c8a07e260e39bac86d4163cfb38a4d ]
Due to a typo during defining HCI errors it is not possible to connect
LE-capable device with BR/EDR only adapter. The connection is terminated
by the LE adapter because the invalid LL params error code is treated
as unsupported remote feature.
Fixes: 79c0868ad65a ("Bluetooth: hci_event: Use HCI error defines instead of magic values")
Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72d061ee630d0dbb45c2920d8d19b3861c413e54 ]
The chan_alloc_skb_cb() function is supposed to return error pointers on
error. Returning NULL will lead to a NULL dereference.
Fixes: 6b8d4a6a03 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9f59a24ba35a7d955a9f8e148dd9f85b7b40a01 ]
Currently the condition of unmapping sdb in error path is not exactly
the same as the condition of mapping in alloc_user_qp_db(). This may
cause a problem of unmapping an unmapped db in some case, such as
when the QP is XRC TGT. Unified the two conditions.
Fixes: 90ae0b57e4 ("RDMA/hns: Combine enable flags of qp")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250311084857.3803665-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25655580136de59ec89f09089dd28008ea440fc9 ]
Driver runs a for-loop when allocating bt pages and mapping them with
buffer pages. When a large buffer (e.g. MR over 100GB) is being allocated,
it may require a considerable loop count. This will lead to soft lockup:
watchdog: BUG: soft lockup - CPU#27 stuck for 22s!
...
Call trace:
hem_list_alloc_mid_bt+0x124/0x394 [hns_roce_hw_v2]
hns_roce_hem_list_request+0xf8/0x160 [hns_roce_hw_v2]
hns_roce_mtr_create+0x2e4/0x360 [hns_roce_hw_v2]
alloc_mr_pbl+0xd4/0x17c [hns_roce_hw_v2]
hns_roce_reg_user_mr+0xf8/0x190 [hns_roce_hw_v2]
ib_uverbs_reg_mr+0x118/0x290
watchdog: BUG: soft lockup - CPU#35 stuck for 23s!
...
Call trace:
hns_roce_hem_list_find_mtt+0x7c/0xb0 [hns_roce_hw_v2]
mtr_map_bufs+0xc4/0x204 [hns_roce_hw_v2]
hns_roce_mtr_create+0x31c/0x3c4 [hns_roce_hw_v2]
alloc_mr_pbl+0xb0/0x160 [hns_roce_hw_v2]
hns_roce_reg_user_mr+0x108/0x1c0 [hns_roce_hw_v2]
ib_uverbs_reg_mr+0x120/0x2bc
Add a cond_resched() to fix soft lockup during these loops. In order not
to affect the allocation performance of normal-size buffer, set the loop
count of a 100GB MR as the threshold to call cond_resched().
Fixes: 38389eaa4d ("RDMA/hns: Add mtr support for mixed multihop addressing")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250311084857.3803665-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81c0db302a674f8004ed805393d17fd76f552e83 ]
Driver is always clearing the mask that sets the VLAN ID/Service Level
in the adapter. Recent change for supporting multiple traffic class
exposed this issue.
Allow setting SL and VLAN_ID while QP is moved from INIT to RTR state.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Fixes: c64b16a37b6d ("RDMA/bnxt_re: Support different traffic class")
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1741670196-2919-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98f3ab18a0a55aa1ff2cd6b74bd0c02c8f76f17e ]
When GENERIC_IRQ_CHIP is disabled, OMAP1 kernels fail to link:
arm-linux-gnueabi-ld: arch/arm/mach-omap1/irq.o: in function `omap1_init_irq':
irq.c:(.init.text+0x1e8): undefined reference to `irq_alloc_generic_chip'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x228): undefined reference to `irq_setup_generic_chip'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x2a8): undefined reference to `irq_gc_set_wake'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x2b0): undefined reference to `irq_gc_mask_set_bit'
arm-linux-gnueabi-ld: irq.c:(.init.text+0x2b4): undefined reference to `irq_gc_mask_clr_bit'
This has apparently been the case for many years, but I never caught it
in randconfig builds until now, as there are dozens of other drivers
that also 'select GENERIC_IRQ_CHIP' and statistically there is almost
always one of them enabled.
Fixes: 55b4477443 ("ARM: OMAP1: Switch to use generic irqchip in preparation for sparse IRQ")
Link: https://lore.kernel.org/r/20250205121151.289535-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 556f93b90c1872ad85e216e613c0b33803e621cb ]
In function create_ib_ah() the following line attempts
to left shift the return value of mlx5r_ib_rate() by 4
and store it in the stat_rate_sl member of av:
However the code overlooks the fact that mlx5r_ib_rate()
may return -EINVAL if the rate passed to it is less than
IB_RATE_2_5_GBPS or greater than IB_RATE_800_GBPS.
Because of this, the code may invoke undefined behaviour when
shifting a signed negative value when doing "-EINVAL << 4".
To fix this check for errors before assigning stat_rate_sl and
propagate any error value to the callers.
Fixes: c534ffda781f ("RDMA/mlx5: Fix AH static rate parsing")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Link: https://patch.msgid.link/20250304140246.205919-1-qasdev00@gmail.com
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43c854c65e47d2f3763345683b06257b4d12e4e3 ]
Property "supports-sd" isn't documented anywhere and is unnecessary for
mainline driver to function. It seems a property used by downstream
kernel was brought into mainline.
This should be reported by dtbs_check, but mmc-controller-common.yaml
defaults additionalProperties to true thus allows it. Remove the
property to clean the devicetree up and avoid possible confusion.
Fixes: 8d94da58de ("arm64: dts: rockchip: Add EmbedFire LubanCat 1")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250228163117.47318-2-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22b03a4e957e462b380a982759ccf0f6554735d3 ]
Use device managed functions to simplify handling of failures during
probe. Remove fail paths which are no longer necessary.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stable-dep-of: cf7139aac463 ("soc: imx8m: Unregister cpufreq and soc dev in cleanup path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c1c02fe8d7f33c18547b79c41f3fa41ef7bae8f ]
The static global soc_uid is only ever used as kasprintf() parameter in
imx8m_soc_probe(). Pass pointer to local u64 variable to .soc_revision()
callback instead and let the .soc_revision() callback fill in the content.
Remove the unnecessary static global variable.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stable-dep-of: cf7139aac463 ("soc: imx8m: Unregister cpufreq and soc dev in cleanup path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0aae2867aa6067f73d066bc98385e23c8454a1d7 ]
The cited commit fixed a software GSO bug with VXLAN + IPSec in tunnel
mode. Unfortunately, it is slightly broader than necessary, as it also
severely affects performance for Geneve + IPSec transport mode over a
device capable of both HW GSO and IPSec crypto offload. In this case,
xfrm_output unnecessarily triggers software GSO instead of letting the
HW do it. In simple iperf3 tests over Geneve + IPSec transport mode over
a back-2-back pair of NICs with MTU 1500, the performance was observed
to be up to 6x worse when doing software GSO compared to leaving it to
the hardware.
This commit makes xfrm_output only trigger software GSO in crypto
offload cases for already encapsulated packets in tunnel mode, as not
doing so would then cause the inner tunnel skb->inner_networking_header
to be overwritten and break software GSO for that packet later if the
device turns out to not be capable of HW GSO.
Taking a closer look at the conditions for the original bug, to better
understand the reasons for this change:
- vxlan_build_skb -> iptunnel_handle_offloads sets inner_protocol and
inner network header.
- then, udp_tunnel_xmit_skb -> ip_tunnel_xmit adds outer transport and
network headers.
- later in the xmit path, xfrm_output -> xfrm_outer_mode_output ->
xfrm4_prepare_output -> xfrm4_tunnel_encap_add overwrites the inner
network header with the one set in ip_tunnel_xmit before adding the
second outer header.
- __dev_queue_xmit -> validate_xmit_skb checks whether GSO segmentation
needs to happen based on dev features. In the original bug, the hw
couldn't segment the packets, so skb_gso_segment was invoked.
- deep in the .gso_segment callback machinery, __skb_udp_tunnel_segment
tries to use the wrong inner network header, expecting the one set in
iptunnel_handle_offloads but getting the one set by xfrm instead.
- a bit later, ipv6_gso_segment accesses the wrong memory based on that
wrong inner network header.
With the new change, the original bug (or similar ones) cannot happen
again, as xfrm will now trigger software GSO before applying a tunnel.
This concern doesn't exist in packet offload mode, when the HW adds
encapsulation headers. For the non-offloaded packets (crypto in SW),
software GSO is still done unconditionally in the else branch.
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Fixes: a204aef9fd ("xfrm: call xfrm_output_gso when inner_protocol is set in xfrm_output")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5eddd76ec2fd1988f0a3450fde9730b10dd22992 ]
Packets that match the output xfrm policy are delivered to the netstack.
In IPsec packet mode for tunnel mode, the HW is responsible for building
the hard header and outer IP header. In such a situation, the inner
header may refer to a network that is not directly reachable by the host,
resulting in a failed neighbor resolution. The packet is then dropped.
xfrm policy defines the netdevice to use for xmit so we can send packets
directly to it.
Makes direct xmit exclusive to tunnel mode, since some rules may apply
in transport mode.
Fixes: f8a70afafc ("xfrm: add TX datapath support for IPsec packet offload mode")
Signed-off-by: Alexandre Cassen <acassen@corp.free.fr>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38f59e0e8bd2b3e1319716e4aeaeb9a6223b006d ]
eMMC is supplied by BUCK5 rail. Use the actual regulator instead of
a virtual fixed regulator.
Fixes: 418d1d840e ("arm64: dts: freescale: add initial device tree for TQMa8MPQL with i.MX8MP")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fbf10b86f6057cf79300720da4ea4b77e6708b0d ]
imx_scu_probe() calls of_parse_phandle_with_args(), but does not
release the OF node reference obtained by it. Add a of_node_put() call
after done with the node.
Fixes: f25a066d1a ("firmware: imx-scu: Support one TX and one RX")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fa23e0d4b756d25829e124d6b670a4c6bbd4bf7e upstream.
Sven Auhagen reports transaction failures with following error:
./main.nft:13:1-26: Error: Could not process rule: Cannot allocate memory
percpu: allocation failed, size=16 align=8 atomic=1, atomic alloc failed, no space left
This points to failing pcpu allocation with GFP_ATOMIC flag.
However, transactions happen from user context and are allowed to sleep.
One case where we can call into percpu allocator with GFP_ATOMIC is
nft_counter expression.
Normally this happens from control plane, so this could use GFP_KERNEL
instead. But one use case, element insertion from packet path,
needs to use GFP_ATOMIC allocations (nft_dynset expression).
At this time, .clone callbacks always use GFP_ATOMIC for this reason.
Add gfp_t argument to the .clone function and pass GFP_KERNEL or
GFP_ATOMIC flag depending on context, this allows all clone memory
allocations to sleep for the normal (transaction) case.
Cc: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c13725f43dcf43ad8a9bcd6a9f12add19a8f93e upstream.
All existing NFT_EXPR_STATEFUL provide a .clone interface, remove
fallback to copy content of stateful expression since this is never
exercised and bail out if .clone interface is not defined.
Stable-dep-of: fa23e0d4b756 ("netfilter: nf_tables: allow clone callbacks to sleep")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7395dfacfff65e9938ac0889dafa1ab01e987d15 upstream.
Add a timestamp field at the beginning of the transaction, store it
in the nftables per-netns area.
Update set backend .insert, .deactivate and sync gc path to use the
timestamp, this avoids that an element expires while control plane
transaction is still unfinished.
.lookup and .update, which are used from packet path, still use the
current time to check if the element has expired. And .get path and dump
also since this runs lockless under rcu read size lock. Then, there is
async gc which also needs to check the current time since it runs
asynchronously from a workqueue.
Fixes: c3e1b005ed ("netfilter: nf_tables: add set element timeout support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit afb41b08c44e5386f2f52fa859010ac4afd2b66f upstream.
In H2CTermReq, a FES with value 0x05 means "R2T Limit Exceeded"; but
in C2HTermReq the same value has a different meaning (Data Transfer Limit
Exceeded).
Fixes: 84e009042d0f ("nvme-tcp: add basic support for the C2HTermReq PDU")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 221cea1003d8a412e5ec64a58df7ab19b654f490 upstream.
Remove the fixup to make the Omoton KB066's F6 key F6 when not holding
Fn. That was really just a hack to allow typing F6 in fnmode>0, and it
didn't fix any of the other F keys that were likewise untypable in
fnmode>0. Instead, because the Omoton's Fn key is entirely internal to
the keyboard, completely disable Fn key translation when an Omoton is
detected, which will prevent the hid-apple driver from interfering with
the keyboard's built-in Fn key handling. All of the F keys, including
F6, are then typable when Fn is held.
The Omoton KB066 and the Apple A1255 both have HID product code
05ac:022c. The self-reported name of every original A1255 when they left
the factory was "Apple Wireless Keyboard". By default, Mac OS changes
the name to "<username>'s keyboard" when pairing with the keyboard, but
Mac OS allows the user to set the internal name of Apple keyboards to
anything they like. The Omoton KB066's name, on the other hand, is not
configurable: It is always "Bluetooth Keyboard". Because that name is so
generic that a user might conceivably use the same name for a real Apple
keyboard, detect Omoton keyboards based on both having that exact name
and having HID product code 022c.
Fixes: 819083cb6eed ("HID: apple: fix up the F6 key on the Omoton KB066 keyboard")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f13409bb3f9140dad7256febcb478f0c9600312c upstream.
It's not possible to call nvme_state_ctrl_state with holding a spin
lock, because nvme_state_ctrl_state calls cancel_delayed_work_sync
when fastfail is enabled.
Instead syncing the ASSOC_FLAG and state transitions using a lock, it's
possible to only rely on the state machine transitions. That means
nvme_fc_ctrl_connectivity_loss should unconditionally call
nvme_reset_ctrl which avoids the read race on the ctrl state variable.
Actually, it's not necessary to test in which state the ctrl is, the
reset work will only scheduled when the state machine is in LIVE state.
In nvme_fc_create_association, the LIVE state can only be entered if it
was previously CONNECTING. If this is not possible then the reset
handler got triggered. Thus just error out here.
Fixes: ee59e3820ca9 ("nvme-fc: do not ignore connectivity loss during connecting")
Closes: https://lore.kernel.org/all/denqwui6sl5erqmz2gvrwueyxakl5txzbbiu3fgebryzrfxunm@iwxuthct377m/
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eea5119fa5979c350af5783a8148eacdd4219715 ]
There are now more servers which advertise support for IAKerb (passthrough
Kerberos authentication via proxy). IAKerb is a public extension industry
standard Kerberos protocol that allows a client without line-of-sight
to a Domain Controller to authenticate. There can be cases where we
would fail to mount if the server only advertises the OID for IAKerb
in SPNEGO/GSSAPI. Add code to allow us to still upcall to userspace
in these cases to obtain the Kerberos ticket.
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 605b249ea967 ("smb: client: Fix match_session bug preventing session reuse")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cad3fc0a4c8cef07b07ceddc137f582267577250 ]
This would help to track and detect by caller if the reparse point type was
processed or not.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
