commit af54d778a03853801d681c98c0c2a6c316ef9ca7 upstream.
dev_coredumpm() creates a devcoredump device and adds it
to the core kernel framework which eventually end up
sending uevent to the user space and later creates a
symbolic link to the failed device. An application
running in userspace may be interested in this symbolic
link to get the name of the failed device.
In a issue scenario, once uevent sent to the user space
it start reading '/sys/class/devcoredump/devcdX/failing_device'
to get the actual name of the device which might not been
created and it is in its path of creation.
To fix this, suppress sending uevent till the failing device
symbolic link gets created and send uevent once symbolic
link is created successfully.
Fixes: 833c95456a ("device coredump: add new device coredump class")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1700232572-25823-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6bb057418876cdfdd29a6f7b8cef54539ee8811 upstream.
Starting RX DMA on THRI interrupt is too early because TX may not have
finished yet.
This change is inspired by commit 90b8596ac4 ("serial: 8250: Prevent
starting up DMA Rx on THRI interrupt") and fixes DMA issues I had with
an AM62 SoC that is using the 8250 OMAP variant.
Cc: stable@vger.kernel.org
Fixes: c26389f998 ("serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs")
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20231101171431.16495-1-rwahl@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08ce9a1b72e38cf44c300a44ac5858533eb3c860 upstream.
This device has a silicon bug that makes it report a timeout interrupt
but no data in the FIFO.
The datasheet states the following in the errata section 18.1.4:
"If the host reads the receive FIFO at the same time as a
time-out interrupt condition happens, the host might read 0xCC
(time-out) in the Interrupt Indication Register (IIR), but bit 0
of the Line Status Register (LSR) is not set (means there is no
data in the receive FIFO)."
The errata description seems to indicate it concerns only polled mode of
operation when reading bit 0 of the LSR register. However, tests have
shown and NXP has confirmed that the RXLVL register also yields 0 when
the bug is triggered, and hence the IRQ driven implementation in this
driver is equally affected.
This bug has hit us on production units and when it does, sc16is7xx_irq()
would spin forever because sc16is7xx_port_irq() keeps seeing an
interrupt in the IIR register that is not cleared because the driver
does not call into sc16is7xx_handle_rx() unless the RXLVL register
reports at least one byte in the FIFO.
Fix this by always reading one byte from the FIFO when this condition
is detected in order to clear the interrupt. This approach was
confirmed to be correct by NXP through their support channels.
Tested by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Co-Developed-by: Maxim Popov <maxim.snafu@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231123072818.1394539-1-daniel@zonque.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b17b7fe6dd5c6ff74b38b0758ca799cdbb79e26e upstream.
When typec_altmode_put_partner is called by a plug altmode upon release,
the port altmode the plug belongs to will not remove its reference to the
plug. The check to see if the altmode being released evaluates against the
released altmode's partner instead of the calling altmode itself, so change
adev in typec_altmode_put_partner to properly refer to the altmode being
released.
typec_altmode_set_partner is not run for port altmodes, so also add a check
in typec_altmode_release to prevent typec_altmode_put_partner() calls on
port altmode release.
Fixes: 8a37d87d72 ("usb: typec: Bus type for alternate modes")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231129192349.1773623-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 92414333eb375ed64f4ae92d34d579e826936480 upstream.
If server returned no data for FSCTL_DFS_GET_REFERRALS, @dfs_rsp will
remain NULL and then parse_dfs_referrals() will dereference it.
Fix this by returning -EIO when no output data is returned.
Besides, we can't fix it in SMB2_ioctl() as some FSCTLs are allowed to
return no data as per MS-SMB2 2.2.32.
Fixes: 9d49640a21 ("CIFS: implement get_dfs_refer for SMB2+")
Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0b9d97a77fa8f18400450713358303a435ab688 upstream.
The console is immediately assigned to the ma35d1 port without
checking its index. This oversight can lead to out-of-bounds
errors when the index falls outside the valid '0' to
MA35_UART_NR range. Such scenario trigges ran error like the
following:
UBSAN: array-index-out-of-bounds in drivers/tty/serial/ma35d1_serial.c:555:51
index -1 is out of range for type 'uart_ma35d1_port [17]
Check the index before using it and bail out with a warning.
Fixes: 930cbf92db ("tty: serial: Add Nuvoton ma35d1 serial driver support")
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Cc: Jacky Huang <ychuang3@nuvoton.com>
Cc: <stable@vger.kernel.org> # v6.5+
Link: https://lore.kernel.org/r/20231204163804.1331415-2-andi.shyti@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61890dc28f7d9e9aac8a9471302613824c22fae4 upstream.
The commit 89ff3dfac6 ("usb: gadget: f_hid: fix f_hidg lifetime vs
cdev") has introduced a bug that leads to hid device corruption after
the replug operation.
Reverse device managed memory allocation for the report descriptor
to fix the issue.
Tested:
This change was tested on the AMD EthanolX CRB server with the BMC
based on the OpenBMC distribution. The BMC provides KVM functionality
via the USB gadget device:
- before: KVM page refresh results in a broken USB device,
- after: KVM page refresh works without any issues.
Fixes: 89ff3dfac6 ("usb: gadget: f_hid: fix f_hidg lifetime vs cdev")
Cc: stable@vger.kernel.org
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Link: https://lore.kernel.org/r/20231206080744.253-2-aladyshev22@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d839a656d0f3caca9f96e9bf912fd394ac6a11bc upstream.
It seems that the pointer-to-kretprobe "rp" within the kretprobe_holder is
RCU-managed, based on the (non-rethook) implementation of get_kretprobe().
The thought behind this patch is to make use of the RCU API where possible
when accessing this pointer so that the needed barriers are always in place
and to self-document the code.
The __rcu annotation to "rp" allows for sparse RCU checking. Plain writes
done to the "rp" pointer are changed to make use of the RCU macro for
assignment. For the single read, the implementation of get_kretprobe()
is simplified by making use of an RCU macro which accomplishes the same,
but note that the log warning text will be more generic.
I did find that there is a difference in assembly generated between the
usage of the RCU macros vs without. For example, on arm64, when using
rcu_assign_pointer(), the corresponding store instruction is a
store-release (STLR) which has an implicit barrier. When normal assignment
is done, a regular store (STR) is found. In the macro case, this seems to
be a result of rcu_assign_pointer() using smp_store_release() when the
value to write is not NULL.
Link: https://lore.kernel.org/all/20231122132058.3359-1-inwardvessel@gmail.com/
Fixes: d741bf41d7 ("kprobes: Remove kretprobe hash")
Cc: stable@vger.kernel.org
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 95dd1e34ff5bbee93a28ff3947eceaf6de811b1a ]
If gpio_set_transitory() fails, we should free the GPIO again. Most
notably, the flag FLAG_REQUESTED has previously been set in
gpiod_request_commit(), and should be reset on failure.
To my knowledge, this does not affect any current users, since the
gpio_set_transitory() mainly returns 0 and -ENOTSUPP, which is converted
to 0. However the gpio_set_transitory() function calles the .set_config()
function of the corresponding GPIO chip and there are some GPIO drivers in
which some (unlikely) branches return other values like -EPROBE_DEFER,
and -EINVAL. In these cases, the above mentioned FLAG_REQUESTED would not
be reset, which results in the pin being blocked until the next reboot.
Fixes: e10f72bf4b ("gpio: gpiolib: Generalise state persistence beyond sleep")
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27d25348d42161837be08fc63b04a2559d2e781c ]
A write-access violation page fault kernel crash was observed while running
cpuhotplug LTP testcases on SEV-ES enabled systems. The crash was
observed during hotplug, after the CPU was offlined and the process
was migrated to different CPU. setup_ghcb() is called again which
tries to update ghcb_version in sev_es_negotiate_protocol(). Ideally this
is a read_only variable which is initialised during booting.
Trying to write it results in a pagefault:
BUG: unable to handle page fault for address: ffffffffba556e70
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
[ ...]
Call Trace:
<TASK>
? __die_body.cold+0x1a/0x1f
? __die+0x2a/0x35
? page_fault_oops+0x10c/0x270
? setup_ghcb+0x71/0x100
? __x86_return_thunk+0x5/0x6
? search_exception_tables+0x60/0x70
? __x86_return_thunk+0x5/0x6
? fixup_exception+0x27/0x320
? kernelmode_fixup_or_oops+0xa2/0x120
? __bad_area_nosemaphore+0x16a/0x1b0
? kernel_exc_vmm_communication+0x60/0xb0
? bad_area_nosemaphore+0x16/0x20
? do_kern_addr_fault+0x7a/0x90
? exc_page_fault+0xbd/0x160
? asm_exc_page_fault+0x27/0x30
? setup_ghcb+0x71/0x100
? setup_ghcb+0xe/0x100
cpu_init_exception_handling+0x1b9/0x1f0
The fix is to call sev_es_negotiate_protocol() only in the BSP boot phase,
and it only needs to be done once in any case.
[ mingo: Refined the changelog. ]
Fixes: 95d33bfaa3 ("x86/sev: Register GHCB memory when SEV-SNP is active")
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Bo Gan <bo.gan@broadcom.com>
Signed-off-by: Bo Gan <bo.gan@broadcom.com>
Signed-off-by: Ashwin Dayanand Kamat <ashwin.kamat@broadcom.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/1701254429-18250-1-git-send-email-kashwindayan@vmware.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b ]
Budimir noted that perf_event_validate_size() only checks the size of
the newly added event, even though the sizes of all existing events
can also change due to not all events having the same read_format.
When we attach the new event, perf_group_attach(), we do re-compute
the size for all events.
Fixes: a723968c0e ("perf: Fix u16 overflows")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6a57588666301acd9d42d3b00d74240964f07f6 ]
Disable MCBP(mid command buffer preemption) by default as old Mesa
hangs with it. We shall not enable the feature that breaks old usermode
driver.
Fixes: 50a7c8765c ("drm/amdgpu: enable mcbp by default on gfx9")
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 487635756198cad563feb47539c6a37ea57f1dae ]
Build is broken if CONFIG_DEBUG_BUGVERBOSE=n.
Fix it be using the correct asm operand number.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes: fe76a1349f23 ("parisc: Use natural CPU alignment for bug_table")
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43266838515d30dc0c45d5c7e6e7edacee6cce92 ]
Enable GENERIC_BUG_RELATIVE_POINTERS which will store 32-bit relative
offsets to the bug address and the source file name instead of 64-bit
absolute addresses. This effectively reduces the size of the
bug_table[] array by half on 64-bit kernels.
Signed-off-by: Helge Deller <deller@gmx.de>
Stable-dep-of: 487635756198 ("parisc: Fix asm operand number out of range build error in bug table")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 862c135bde8bc185e8aae2110374175e6a1b6ed5 ]
In smb_reset_buffer, the sdb->buf_hw_base variable is uninitialized
before use, which initializes it in smb_init_data_buffer. And the SMB
regiester are set in smb_config_inport.
So move the call after smb_config_inport.
Fixes: 06f5c2926a ("drivers/coresight: Add UltraSoc System Memory Buffer driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231114133346.30489-4-hejunhao3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 830a7f54db102c889a3fe1c0a225f369ac05f07f ]
The SMB dirver register the enable/disable sysfs interface in function
smb_register_sink(), however the buffer depends on the following
configuration to work well. So it'll be possible for user to access an
unreset one.
Move the config buffer operation to before register_sink().
Ignore the return value, if smb_config_inport() fails. That will
cause the hardwares disable trace path to fail, should not affect
SMB driver remove. So we make smb_remove() return success,
Fixes: 06f5c2926a ("drivers/coresight: Add UltraSoc System Memory Buffer driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231114133346.30489-3-hejunhao3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8411287aef4a994eff0c68f5597910c4194dfe3 ]
When we to enable the SMB by perf, the perf sched will call perf_ctx_lock()
to close system preempt in event_function_call(). But SMB::enable_smb() use
mutex to lock the critical section, which may sleep.
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 153023, name: perf
preempt_count: 2, expected: 0
RCU nest depth: 0, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffffa2983f5c5f40>] copy_process+0xae8/0x2b48
softirqs last enabled at (0): [<ffffa2983f5c5f40>] copy_process+0xae8/0x2b48
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 2 PID: 153023 Comm: perf Kdump: loaded Tainted: G W O 6.5.0-rc4+ #1
Call trace:
...
__mutex_lock+0xbc/0xa70
mutex_lock_nested+0x34/0x48
smb_update_buffer+0x58/0x360 [ultrasoc_smb]
etm_event_stop+0x204/0x2d8 [coresight]
etm_event_del+0x1c/0x30 [coresight]
event_sched_out+0x17c/0x3b8
group_sched_out.part.0+0x5c/0x208
__perf_event_disable+0x15c/0x210
event_function+0xe0/0x230
remote_function+0xb4/0xe8
generic_exec_single+0x160/0x268
smp_call_function_single+0x20c/0x2a0
event_function_call+0x20c/0x220
_perf_event_disable+0x5c/0x90
perf_event_for_each_child+0x58/0xc0
_perf_ioctl+0x34c/0x1250
perf_ioctl+0x64/0x98
...
Use spinlock to replace mutex to control driver data access to one at a
time. The function copy_to_user() may sleep, it cannot be in a spinlock
context, so we can't simply replace it in smb_read(). But we can ensure
that only one user gets the SMB device fd by smb_open(), so remove the
locks from smb_read() and buffer synchronization is guaranteed by the user.
Fixes: 06f5c2926a ("drivers/coresight: Add UltraSoc System Memory Buffer driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231114133346.30489-2-hejunhao3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 287e82cf69aa264a52bc37591bd0eb407e20f85c ]
Partially revert the change in commit 6148652807 ("coresight: Enable
and disable helper devices adjacent to the path") which changed the bare
call from source_ops(csdev)->enable() to coresight_enable_source() for
Perf sessions. It was missed that coresight_enable_source() is
specifically for the sysfs interface, rather than being a generic call.
This interferes with the sysfs reference counting to cause the following
crash:
$ perf record -e cs_etm/@tmc_etr0/ -C 0 &
$ echo 1 > /sys/bus/coresight/devices/tmc_etr0/enable_sink
$ echo 1 > /sys/bus/coresight/devices/etm0/enable_source
$ echo 0 > /sys/bus/coresight/devices/etm0/enable_source
Unable to handle kernel NULL pointer dereference at virtual
address 00000000000001d0
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
...
Call trace:
etm4_disable+0x54/0x150 [coresight_etm4x]
coresight_disable_source+0x6c/0x98 [coresight]
coresight_disable+0x74/0x1c0 [coresight]
enable_source_store+0x88/0xa0 [coresight]
dev_attr_store+0x20/0x40
sysfs_kf_write+0x4c/0x68
kernfs_fop_write_iter+0x120/0x1b8
vfs_write+0x2dc/0x3b0
ksys_write+0x70/0x108
__arm64_sys_write+0x24/0x38
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0x104/0x130
do_el0_svc+0x40/0xb8
el0_svc+0x2c/0xb8
el0t_64_sync_handler+0xc0/0xc8
el0t_64_sync+0x1a4/0x1a8
Code: d53cd042 91002000 b9402a81 b8626800 (f940ead5)
---[ end trace 0000000000000000 ]---
This commit linked below also fixes the issue, but has unlocked updates
to the mode which could potentially race. So until we come up with a
more complete solution that takes all locking and interaction between
both modes into account, just revert back to the old behavior for Perf.
Reported-by: Junhao He <hejunhao3@huawei.com>
Closes: https://lore.kernel.org/linux-arm-kernel/20230921132904.60996-1-hejunhao3@huawei.com/
Fixes: 6148652807 ("coresight: Enable and disable helper devices adjacent to the path")
Tested-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231006131452.646721-1-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 348ddab81f7b0983d9fb158df910254f08d3f887 ]
etm4_platform_driver (which lives in ".data" contains a reference to
etm4_remove_platform_dev(). So the latter must not be marked with __exit
which results in the function being discarded for a build with
CONFIG_CORESIGHT_SOURCE_ETM4X=y which in turn makes the remove pointer
contain invalid data.
etm4x_amba_driver referencing etm4_remove_amba() has the same issue.
Drop the __exit annotations for the two affected functions and a third
one that is called by the other two.
For reasons I don't understand this isn't catched by building with
CONFIG_DEBUG_SECTION_MISMATCH=y.
Fixes: c23bc382ef ("coresight: etm4x: Refactor probing routine")
Fixes: 5214b56358 ("coresight: etm4x: Add support for sysreg only devices")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/all/20230929081540.yija47lsj35xtj4v@pengutronix.de/
Link: https://lore.kernel.org/r/20230929081637.2377335-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9adf7580f6d498a5839e02fa1d1535e934364602 upstream.
Clocks for each power domain are split into big categories: pd clocks
and subsys clocks.
According to the binding, all clocks which have a dash '-' in their name
are treated as subsys clocks, and must be placed at the end of the list.
The other clocks which are pd clocks must come first.
Fixed the naming and the placing of all clocks in the power domains.
For the avoidance of doubt, prefixed all subsys clocks with the 'subsys'
prefix. The binding does not enforce strict clock names, the driver
uses them in bulk, only making a difference for pd clocks vs subsys clocks.
The above problem appears to be trivial, however, it leads to incorrect
power up and power down sequence of the power domains, because some
clocks will be mistakenly taken for subsys clocks and viceversa.
One consequence is the fact that if the DIS power domain goes power down
and power back up during the boot process, when it comes back up, there
are still transactions left on the bus which makes the display inoperable.
Some of the clocks for the DIS power domain were wrongly using '_' instead
of '-', which again made these clocks being treated as pd clocks instead of
subsys clocks.
Cc: stable@vger.kernel.org
Fixes: d9e43c1e7a ("arm64: dts: mt8186: Add power domains controller")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20231005103041.352478-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61b94d54421a1f3670ddd5396ec70afe833e9405 upstream.
Before suspending the LARBs we're making sure that any operation is
done: this never happens because we are unexpectedly unclocking the
LARB20 before executing the suspend handler for the MediaTek Smart
Multimedia Interface (SMI) and the cause of this is incorrect clocks
on this LARB.
Fix this issue by changing the Local Arbiter 20 (used by the video
encoder secondary core) apb clock to CLK_VENC_CORE1_VENC;
furthermore, in order to make sure that both the PM resume and video
encoder operation is stable, add the CLK_VENC(_CORE1)_LARB clock to
the VENC (main core) and VENC_CORE1 power domains, as this IP cannot
communicate with the rest of the system (the AP) without local
arbiter clocks being operational.
Cc: stable@vger.kernel.org
Fixes: 3b5838d1d8 ("arm64: dts: mt8195: Add iommu and smi nodes")
Fixes: 2b515194bf ("arm64: dts: mt8195: Add power domains controller")
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230706095841.109315-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74543b303a9abfe4fa253d1fa215281baa05ff3a upstream.
dtbs_check throws a warning at the dsi node:
Warning (avoid_unnecessary_addr_size): /soc/dsi@14014000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Other DTS have a panel child node with a reg, so the parent dtsi
must have the address-cells and size-cells, however this specific DT
has the panel removed, but not the cells, hence the warning above.
If panel is deleted then the cells must also be deleted since they are
tied together, as the child node in this DT does not have a reg.
Cc: stable@vger.kernel.org
Fixes: cabc71b08e ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230814071053.5459-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20c2dbff342aec13bf93c2f6c951da198916a455 upstream.
Apparently some BXT/GLK systems have DSI panels whose timings
don't agree with the normal cpu transcoder hblank>=32 limitation.
This is perhaps fine as there are no specific hblank/etc. limits
listed for the BXT/GLK DSI transcoders.
Move those checks out from the global intel_mode_valid() into
into connector specific .mode_valid() hooks, skipping BXT/GLK
DSI connectors. We'll leave the basic [hv]display/[hv]total
checks in intel_mode_valid() as those seem like sensible upper
limits regardless of the transcoder used.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9720
Fixes: 8f4b1068e7 ("drm/i915: Check some transcoder timing minimum limits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit e0ef2daa8ca8ce4dbc2fd0959e383b753a87fd7d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
