[ Upstream commit f1956f4ec1 ]
When connecting the Xen 9pfs frontend to the backend, the "versions"
Xenstore entry written by the backend is parsed in a wrong way.
The "versions" entry is defined to contain the versions supported by
the backend separated by commas (e.g. "1,2"). Today only version "1"
is defined. Unfortunately the frontend doesn't look for "1" being
listed in the entry, but it is expecting the entry to have the value
"1".
This will result in failure as soon as the backend will support e.g.
versions "1" and "2".
Fix that by scanning the entry correctly.
Link: https://lkml.kernel.org/r/20230130113036.7087-2-jgross@suse.com
Fixes: 71ebd71921 ("xen/9pfs: connect to the backend")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac3ad19584 ]
dev_kfree_skb() is aliased to consume_skb().
When a driver is dropping a packet by calling dev_kfree_skb_any()
we should propagate the drop reason instead of pretending
the packet was consumed.
Note: Now we have enum skb_drop_reason we could remove
enum skb_free_reason (for linux-6.4)
v2: added an unlikely(), suggested by Yunsheng Lin.
Fixes: e6247027e5 ("net: introduce dev_consume_skb_any()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68ba446395 ]
With this refcnt added in sctp_stream_priorities, we don't need to
traverse all streams to check if the prio is used by other streams
when freeing one stream's prio in sctp_sched_prio_free_sid(). This
can avoid a nested loop (up to 65535 * 65535), which may cause a
stuck as Ying reported:
watchdog: BUG: soft lockup - CPU#23 stuck for 26s! [ksoftirqd/23:136]
Call Trace:
<TASK>
sctp_sched_prio_free_sid+0xab/0x100 [sctp]
sctp_stream_free_ext+0x64/0xa0 [sctp]
sctp_stream_free+0x31/0x50 [sctp]
sctp_association_free+0xa5/0x200 [sctp]
Note that it doesn't need to use refcount_t type for this counter,
as its accessing is always protected under the sock lock.
v1->v2:
- add a check in sctp_sched_prio_set to avoid the possible prio_head
refcnt overflow.
Fixes: 9ed7bfc795 ("sctp: fix memory leak in sctp_stream_outq_migrate()")
Reported-by: Ying Xu <yinxu@redhat.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/825eb0c905cb864991eba335f4a2b780e543f06b.1677085641.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edea0c5a99 ]
When checksum offload is disabled in the driver via ethtool,
the PTP 1-step sync packets contain incorrect checksum, since
the stack calculates the checksum before driver updates
PTP timestamp field in the packet. This results in PTP packets
getting dropped at the other end. This patch fixes the issue by
re-calculating the UDP checksum after updating PTP
timestamp field in the driver.
Fixes: 2958d17a89 ("octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Link: https://lore.kernel.org/r/20230222113600.1965116-1-saikrishnag@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cc59f3869 ]
In function rt6_nlmsg_size(), the length of nexthop is calculated
by multipling the nexthop length of fib6_info and the number of
siblings. However if the fib6_info has no lwtunnel but the siblings
have lwtunnels, the nexthop length is less than it should be, and
it will trigger a warning in inet6_rt_notify() as follows:
WARNING: CPU: 0 PID: 6082 at net/ipv6/route.c:6180 inet6_rt_notify+0x120/0x130
......
Call Trace:
<TASK>
fib6_add_rt2node+0x685/0xa30
fib6_add+0x96/0x1b0
ip6_route_add+0x50/0xd0
inet6_rtm_newroute+0x97/0xa0
rtnetlink_rcv_msg+0x156/0x3d0
netlink_rcv_skb+0x5a/0x110
netlink_unicast+0x246/0x350
netlink_sendmsg+0x250/0x4c0
sock_sendmsg+0x66/0x70
___sys_sendmsg+0x7c/0xd0
__sys_sendmsg+0x5d/0xb0
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
This bug can be reproduced by script:
ip -6 addr add 2002::2/64 dev ens2
ip -6 route add 100::/64 via 2002::1 dev ens2 metric 100
for i in 10 20 30 40 50 60 70;
do
ip link add link ens2 name ipv_$i type ipvlan
ip -6 addr add 2002::$i/64 dev ipv_$i
ifconfig ipv_$i up
done
for i in 10 20 30 40 50 60;
do
ip -6 route append 100::/64 encap ip6 dst 2002::$i via 2002::1
dev ipv_$i metric 100
done
ip -6 route append 100::/64 via 2002::1 dev ipv_70 metric 100
This patch fixes it by adding nexthop_len of every siblings using
rt6_nh_nlmsg_size().
Fixes: beb1afac51 ("net: ipv6: Add support to dump multipath routes via RTA_MULTIPATH attribute")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230222083629.335683-2-luwei32@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67d93ffc0f ]
vclocks were using spinlocks to protect access to its timecounter and
cyclecounter. Access to timecounter/cyclecounter is backed by the same
driver callbacks that are used for non-virtual PHCs, but the usage of
the spinlock imposes a new limitation that didn't exist previously: now
they're called in atomic context so they mustn't sleep.
Some drivers like sfc or ice may sleep on these callbacks, causing
errors like "BUG: scheduling while atomic: ptp5/25223/0x00000002"
Fix it replacing the vclock's spinlock by a mutex. It fix the mentioned
bug and it doesn't introduce longer delays.
I've tested synchronizing various different combinations of clocks:
- vclock->sysclock
- sysclock->vclock
- vclock->vclock
- hardware PHC in different NIC -> vclock
- created 4 vclocks and launch 4 parallel phc2sys processes with
lockdep enabled
In all cases, comparing the delays reported by phc2sys, they are in the
same range of values than before applying the patch.
Link: https://lore.kernel.org/netdev/69d0ff33-bd32-6aa5-d36c-fbdc3c01337c@redhat.com/
Fixes: 5d43f951b1 ("ptp: add ptp virtual clock driver framework")
Reported-by: Yalin Li <yalli@redhat.com>
Suggested-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20230221130616.21837-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0af8c09c89 ]
Here is the stack where we allocate percpu counter block:
+-< __alloc_percpu
+-< xt_percpu_counter_alloc
+-< find_check_entry # {arp,ip,ip6}_tables.c
+-< translate_table
And it can be leaked on this code path:
+-> ip6t_register_table
+-> translate_table # allocates percpu counter block
+-> xt_register_table # fails
there is no freeing of the counter block on xt_register_table fail.
Note: xt_percpu_counter_free should be called to free it like we do in
do_replace through cleanup_entry helper (or in __ip6t_unregister_table).
Probability of hitting this error path is low AFAICS (xt_register_table
can only return ENOMEM here, as it is not replacing anything, as we are
creating new netns, and it is hard to imagine that all previous
allocations succeeded and after that one in xt_register_table failed).
But it's worth fixing even the rare leak.
Fixes: 71ae0dff02 ("netfilter: xtables: use percpu rule counters")
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdf6491193 ]
pernet tracking doesn't work correctly because other netns might have
set NETLINK_LISTEN_ALL_NSID on its event socket.
In this case its expected that events originating in other net
namespaces are also received.
Making pernet-tracking work while also honoring NETLINK_LISTEN_ALL_NSID
requires much more intrusive changes both in netlink and nfnetlink,
f.e. adding a 'setsockopt' callback that lets nfnetlink know that the
event socket entered (or left) ALL_NSID mode.
Move to global tracking instead: if there is an event socket anywhere
on the system, all net namespaces which have conntrack enabled and
use autobind mode will allocate the ecache extension.
netlink_has_listeners() returns false only if the given group has no
subscribers in any net namespace, the 'net' argument passed to
nfnetlink_has_listeners is only used to derive the protocol (nfnetlink),
it has no other effect.
For proper NETLINK_LISTEN_ALL_NSID-aware pernet tracking of event
listeners a new netlink_has_net_listeners() is also needed.
Fixes: 90d1daa458 ("netfilter: conntrack: add nf_conntrack_events autodetect mode")
Reported-by: Bryce Kahle <bryce.kahle@datadoghq.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05c07c0c6c ]
For IPv6 Jumbo packets, the ipv6_hdr(skb)->payload_len is always 0,
and its real payload_len ( > 65535) is saved in hbh exthdr. With 0
length for the jumbo packets, it may mismatch.
To fix this, we can just use skb->len instead of parsing exthdrs, as
the hbh exthdr parsing has been done before coming to length_mt6 in
ip6_rcv_core() and br_validate_ipv6() and also the packet has been
trimmed according to the correct IPv6 (ext)hdr length there, and skb
len is trustable in length_mt6().
Note that this patch is especially needed after the IPv6 BIG TCP was
supported in kernel, which is using IPv6 Jumbo packets. Besides, to
match the packets greater than 65535 more properly, a v1 revision of
xt_length may be needed to extend "min, max" to u32 in the future,
and for now the IPv6 Jumbo packets can be matched by:
# ip6tables -m length ! --length 0:65535
Fixes: 7c4e983c4f ("net: allow gso_max_size to exceed 65536")
Fixes: 0fe79f28bf ("net: allow gro_max_size to exceed 65536")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e58a171d35 ]
We are not allowed to return an error at this point.
Looking at the code it looks like ret is always 0 at this
point, but its not.
t = find_table_lock(net, repl->name, &ret, &ebt_mutex);
... this can return a valid table, with ret != 0.
This bug causes update of table->private with the new
blob, but then frees the blob right away in the caller.
Syzbot report:
BUG: KASAN: vmalloc-out-of-bounds in __ebt_unregister_table+0xc00/0xcd0 net/bridge/netfilter/ebtables.c:1168
Read of size 4 at addr ffffc90005425000 by task kworker/u4:4/74
Workqueue: netns cleanup_net
Call Trace:
kasan_report+0xbf/0x1f0 mm/kasan/report.c:517
__ebt_unregister_table+0xc00/0xcd0 net/bridge/netfilter/ebtables.c:1168
ebt_unregister_table+0x35/0x40 net/bridge/netfilter/ebtables.c:1372
ops_exit_list+0xb0/0x170 net/core/net_namespace.c:169
cleanup_net+0x4ee/0xb10 net/core/net_namespace.c:613
...
ip(6)tables appears to be ok (ret should be 0 at this point) but make
this more obvious.
Fixes: c58dd2dd44 ("netfilter: Can't fail and free after table replacement")
Reported-by: syzbot+f61594de72d6705aea03@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efb056e5f1 ]
When calling ip6_route_lookup() for the packet arriving on the VRF
interface, the result is always the real (slave) interface. Expect this
when validating the result.
Fixes: acc641ab95 ("netfilter: rpfilter/fib: Populate flowic_l3mdev field")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6d57e9ff0 ]
nf_conntrack_hash_check_insert() callers free the ct entry directly, via
nf_conntrack_free.
This isn't safe anymore because
nf_conntrack_hash_check_insert() might place the entry into the conntrack
table and then delteted the entry again because it found that a conntrack
extension has been removed at the same time.
In this case, the just-added entry is removed again and an error is
returned to the caller.
Problem is that another cpu might have picked up this entry and
incremented its reference count.
This results in a use-after-free/double-free, once by the other cpu and
once by the caller of nf_conntrack_hash_check_insert().
Fix this by making nf_conntrack_hash_check_insert() not fail anymore
after the insertion, just like before the 'Fixes' commit.
This is safe because a racing nf_ct_iterate() has to wait for us
to release the conntrack hash spinlocks.
While at it, make the function return -EAGAIN in the rmmod (genid
changed) case, this makes nfnetlink replay the command (suggested
by Pablo Neira).
Fixes: c56716c69c ("netfilter: extensions: introduce extension genid count")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac4893980b ]
nf_ct_put() needs to be called to put the refcount got by
nf_conntrack_find_get() to avoid refcount leak when
nf_conntrack_hash_check_insert() fails.
Fixes: 7d367e0668 ("netfilter: ctnetlink: fix soft lockup when netlink adds new entries (v2)")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d06c07c67 ]
The stack variable msb and lsb may be used uninitialized in function
usb_pcwd_get_temperature and usb_pcwd_get_timeleft when usb card no response.
The build waring is:
drivers/watchdog/pcwd_usb.c:336:22: error: ‘lsb’ is used uninitialized in this function [-Werror=uninitialized]
*temperature = (lsb * 9 / 5) + 32;
~~~~^~~
drivers/watchdog/pcwd_usb.c:328:21: note: ‘lsb’ was declared here
unsigned char msb, lsb;
^~~
cc1: all warnings being treated as errors
scripts/Makefile.build:250: recipe for target 'drivers/watchdog/pcwd_usb.o' failed
make[3]: *** [drivers/watchdog/pcwd_usb.o] Error 1
Fixes: b7e04f8c61 ("mv watchdog tree under drivers")
Signed-off-by: Li Hua <hucool.lihua@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221116020706.70847-1-hucool.lihua@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f769f97917 ]
As per section 48.4 of the HW User Manual, IPs in the RZ/V2M
SoC need either a TYPE-A reset sequence or a TYPE-B reset
sequence. More specifically, the watchdog IP needs a TYPE-B
reset sequence.
If the proper reset sequence isn't implemented, then resetting
IPs may lead to undesired behaviour. In the restart callback of
the watchdog driver the reset has basically no effect on the
desired funcionality, as the register writes following the reset
happen before the IP manages to come out of reset.
Implement the TYPE-B reset sequence in the watchdog driver to
address the issues with the restart callback on RZ/V2M.
Fixes: ec122fd94e ("watchdog: rzg2l_wdt: Add rzv2m support")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20221117114907.138583-3-fabrizio.castro.jz@renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ba6f0f591 ]
On RZ/Five SoC it was observed that setting timeout (to say 1 sec) wouldn't
reset the system.
The procedure described in the HW manual (Procedure for Activating Modules)
for activating the target module states we need to start supply of the
clock module before applying the reset signal. This patch makes sure we
follow the same procedure to clear the registers of the WDT module, fixing
the issues seen on RZ/Five SoC.
While at it re-used rzg2l_wdt_stop() in rzg2l_wdt_set_timeout() as it has
the same function calls.
Fixes: 4055ee8100 ("watchdog: rzg2l_wdt: Add set_timeout callback")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20221117114907.138583-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 339b84dcd7 ]
Triggering a bus rescan will not cause the PCI device to be removed. It
is required to explicitly stop and remove the device from the bus.
Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abdeb4fa5e ]
We should not be calling virtio_break_device from an IRQ context.
Move breaking the device into the workqueue so that it is done from
a reasonable context.
Fixes: af9fb41ed3 ("um: virtio_uml: Fix broken device handling in time-travel")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e9cd85139 ]
Mark the device as not registered anymore when scheduling the work to
remove it. Otherwise we could end up scheduling the work multiple times
in a row, including scheduling it while it is already running.
Fixes: af9fb41ed3 ("um: virtio_uml: Fix broken device handling in time-travel")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a6ca54364 ]
If adding the command fails (i.e. the virtqueue is broken) then free it
again if the function allocated a new buffer for it.
Fixes: 68f5d3f3b6 ("um: add PCI over virtio emulation driver")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5541992e51 ]
The 'syscall' instruction clobbers '%rcx' and '%r11', but they are not
listed in the inline Assembly that performs the syscall instruction.
No real bug is found. It wasn't buggy by luck because '%rcx' and '%r11'
are caller-saved registers, and not used in the functions, and the
functions are never inlined.
Add them to the clobber list for code correctness.
Fixes: f1c2bb8b99 ("um: implement a x86_64 vDSO")
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92f3e96d64 ]
NFT_MSG_GETSETELEM returns -EPERM when fetching set elements that belong
to table that has an owner. This results in empty set/map listing from
userspace.
Fixes: 6001a930ce ("netfilter: nftables: introduce table ownership")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acdbf5f9b2 ]
This driver relies on SMEM to populate items for each subsystem before
the device probes. The items in SMEM that are being looked for are
populated by the subsystems lazily, and therefore may not exist until
the device has booted. For example, if I build this driver into the
kernel on Trogdor Lazor and boot up, I don't see a 'modem' debugfs file
populated, because the modem boots and populates the SMEM item after
this driver probes.
Always populate the files for the subsystems if they're in SMEM, and
make the qcom_subsystem_sleep_stats_show() function return 0 if the SMEM
items still isn't there. This way we can run a simple command like
grep ^ /sys/kernel/debug/qcom_stats/*
and collect the subsystem sleep stats without interspersed errors or
missing details entirely because this driver probed first.
Fixes: 1d77246903 ("soc: qcom: Add Sleep stats driver")
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119032329.2909383-1-swboyd@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a240bc5c43 ]
Wear-leveling entry could be freed in error path, which may be accessed
again in eraseblk_count_seq_show(), for example:
__erase_worker eraseblk_count_seq_show
wl = ubi->lookuptbl[*block_number]
if (wl)
wl_entry_destroy
ubi->lookuptbl[e->pnum] = NULL
kmem_cache_free(ubi_wl_entry_slab, e)
erase_count = wl->ec // UAF!
Wear-leveling entry updating/accessing in ubi->lookuptbl should be
protected by ubi->wl_lock, fix it by adding ubi->wl_lock to serialize
wl entry accessing between wl_entry_destroy() and
eraseblk_count_seq_show().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216305
Fixes: 7bccd12d27 ("ubi: Add debugfs file for tracking PEB state")
Fixes: 801c135ce7 ("UBI: Unsorted Block Images")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76f9476ece ]
After disabling fastmap(ubi->fm_disabled = 1), fastmap won't be updated,
fm_anchor PEB is missed being scheduled for erasing. Besides, fm_anchor
PEB may have smallest erase count, it doesn't participate wear-leveling.
The difference of erase count between fm_anchor PEB and other PEBs will
be larger and larger later on.
In which situation fastmap can be disabled? Initially, we have an UBI
image with fastmap. Then the image will be atttached without module
parameter 'fm_autoconvert', ubi turns to full scanning mode in one
random attaching process(eg. bad fastmap caused by powercut), ubi
fastmap is disabled since then.
Fix it by not getting fm_anchor if fastmap is disabled in
ubi_refill_pools().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216341
Fixes: 4b68bf9a69 ("ubi: Select fastmap anchor PEBs considering ...")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66f4742e93 ]
There are two states for ubifs writing pages:
1. Dirty, Private
2. Not Dirty, Not Private
The normal process cannot go to ubifs_releasepage() which means there
exists pages being private but not dirty. Reproducer[1] shows that it
could occur (which maybe related to [2]) with following process:
PA PB PC
lock(page)[PA]
ubifs_write_end
attach_page_private // set Private
__set_page_dirty_nobuffers // set Dirty
unlock(page)
write_cache_pages[PA]
lock(page)
clear_page_dirty_for_io(page) // clear Dirty
ubifs_writepage
do_truncation[PB]
truncate_setsize
i_size_write(inode, newsize) // newsize = 0
i_size = i_size_read(inode) // i_size = 0
end_index = i_size >> PAGE_SHIFT
if (page->index > end_index)
goto out // jump
out:
unlock(page) // Private, Not Dirty
generic_fadvise[PC]
lock(page)
invalidate_inode_page
try_to_release_page
ubifs_releasepage
ubifs_assert(c, 0)
// bad assertion!
unlock(page)
truncate_pagecache[PB]
Then we may get following assertion failed:
UBIFS error (ubi0:0 pid 1683): ubifs_assert_failed [ubifs]:
UBIFS assert failed: 0, in fs/ubifs/file.c:1513
UBIFS warning (ubi0:0 pid 1683): ubifs_ro_mode [ubifs]:
switched to read-only mode, error -22
CPU: 2 PID: 1683 Comm: aa Not tainted 5.16.0-rc5-00184-g0bca5994cacc-dirty #308
Call Trace:
dump_stack+0x13/0x1b
ubifs_ro_mode+0x54/0x60 [ubifs]
ubifs_assert_failed+0x4b/0x80 [ubifs]
ubifs_releasepage+0x67/0x1d0 [ubifs]
try_to_release_page+0x57/0xe0
invalidate_inode_page+0xfb/0x130
__invalidate_mapping_pages+0xb9/0x280
invalidate_mapping_pagevec+0x12/0x20
generic_fadvise+0x303/0x3c0
ksys_fadvise64_64+0x4c/0xb0
[1] https://bugzilla.kernel.org/show_bug.cgi?id=215373
[2] https://linux-mtd.infradead.narkive.com/NQoBeT1u/patch-rfc-ubifs-fix-assert-failed-in-ubifs-set-page-dirty
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb8bc4c74a ]
There are two states for ubifs writing pages:
1. Dirty, Private
2. Not Dirty, Not Private
There is a third possibility which maybe related to [1] that page is
private but not dirty caused by following process:
PA
lock(page)
ubifs_write_end
attach_page_private // set Private
__set_page_dirty_nobuffers // set Dirty
unlock(page)
write_cache_pages
lock(page)
clear_page_dirty_for_io(page) // clear Dirty
ubifs_writepage
write_inode
// fail, goto out, following codes are not executed
// do_writepage
// set_page_writeback // set Writeback
// detach_page_private // clear Private
// end_page_writeback // clear Writeback
out:
unlock(page) // Private, Not Dirty
PB
ksys_fadvise64_64
generic_fadvise
invalidate_inode_page
// page is neither Dirty nor Writeback
invalidate_complete_page
// page_has_private is true
try_to_release_page
ubifs_releasepage
ubifs_assert(c, 0) !!!
Then we may get following assertion failed:
UBIFS error (ubi0:0 pid 1492): ubifs_assert_failed [ubifs]:
UBIFS assert failed: 0, in fs/ubifs/file.c:1499
UBIFS warning (ubi0:0 pid 1492): ubifs_ro_mode [ubifs]:
switched to read-only mode, error -22
CPU: 2 PID: 1492 Comm: aa Not tainted 5.16.0-rc2-00012-g7bb767dee0ba-dirty
Call Trace:
dump_stack+0x13/0x1b
ubifs_ro_mode+0x54/0x60 [ubifs]
ubifs_assert_failed+0x4b/0x80 [ubifs]
ubifs_releasepage+0x7e/0x1e0 [ubifs]
try_to_release_page+0x57/0xe0
invalidate_inode_page+0xfb/0x130
invalidate_mapping_pagevec+0x12/0x20
generic_fadvise+0x303/0x3c0
vfs_fadvise+0x35/0x40
ksys_fadvise64_64+0x4c/0xb0
Jump [2] to find a reproducer.
[1] https://linux-mtd.infradead.narkive.com/NQoBeT1u/patch-rfc-ubifs-fix-assert-failed-in-ubifs-set-page-dirty
[2] https://bugzilla.kernel.org/show_bug.cgi?id=215357
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 122deabfe1 ]
Following process will cause a memleak for copied up znode:
dirty_cow_znode
zn = copy_znode(c, znode);
err = insert_old_idx(c, zbr->lnum, zbr->offs);
if (unlikely(err))
return ERR_PTR(err); // No one refers to zn.
Fix it by adding copied znode back to tnc, then it will be freed
by ubifs_destroy_tnc_subtree() while closing tnc.
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216705
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 944e096aa2 ]
Dirty znodes will be written on flash in committing process with
following states:
process A | znode state
------------------------------------------------------
do_commit | DIRTY_ZNODE
ubifs_tnc_start_commit | DIRTY_ZNODE
get_znodes_to_commit | DIRTY_ZNODE | COW_ZNODE
layout_commit | DIRTY_ZNODE | COW_ZNODE
fill_gap | 0
write master | 0 or OBSOLETE_ZNODE
process B | znode state
------------------------------------------------------
do_commit | DIRTY_ZNODE[1]
ubifs_tnc_start_commit | DIRTY_ZNODE
get_znodes_to_commit | DIRTY_ZNODE | COW_ZNODE
ubifs_tnc_end_commit | DIRTY_ZNODE | COW_ZNODE
write_index | 0
write master | 0 or OBSOLETE_ZNODE[2] or
| DIRTY_ZNODE[3]
[1] znode is dirtied without concurrent committing process
[2] znode is copied up (re-dirtied by other process) before cleaned
up in committing process
[3] znode is re-dirtied after cleaned up in committing process
Currently, the clean znode count is updated in free_obsolete_znodes(),
which is called only in normal path. If do_commit failed, clean znode
count won't be updated, which triggers a failure ubifs assertion[4] in
ubifs_tnc_close():
ubifs_assert_failed [ubifs]: UBIFS assert failed: freed == n
[4] Commit 380347e9ca ("UBIFS: Add an assertion for clean_zn_cnt").
Fix it by re-statisticing cleaned znode count in tnc_destroy_cnext().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216704
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c15859bfd3 ]
It willl cause null-ptr-deref in the following case:
uif_init()
ubi_add_volume()
cdev_add() -> if it fails, call kill_volumes()
device_register()
kill_volumes() -> if ubi_add_volume() fails call this function
ubi_free_volume()
cdev_del()
device_unregister() -> trying to delete a not added device,
it causes null-ptr-deref
So in ubi_free_volume(), it delete devices whether they are added
or not, it will causes null-ptr-deref.
Handle the error case whlie calling ubi_add_volume() to fix this
problem. If add volume fails, set the corresponding vol to null,
so it can not be accessed in kill_volumes() and release the
resource in ubi_add_volume() error path.
Fixes: 801c135ce7 ("UBI: Unsorted Block Images")
Suggested-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9af31d6ec1 ]
There is an use-after-free problem reported by KASAN:
==================================================================
BUG: KASAN: use-after-free in ubi_eba_copy_table+0x11f/0x1c0 [ubi]
Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735
CPU: 2 PID: 4735 Comm: ubirsvol
Not tainted 6.1.0-rc1-00003-g84fa3304a7fc-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report+0x171/0x472
kasan_report+0xad/0x130
ubi_eba_copy_table+0x11f/0x1c0 [ubi]
ubi_resize_volume+0x4f9/0xbc0 [ubi]
ubi_cdev_ioctl+0x701/0x1850 [ubi]
__x64_sys_ioctl+0x11d/0x170
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
When ubi_change_vtbl_record() returns an error in ubi_resize_volume(),
"new_eba_tbl" will be freed on error handing path, but it is holded
by "vol->eba_tbl" in ubi_eba_replace_table(). It means that the liftcycle
of "vol->eba_tbl" and "vol" are different, so when resizing volume in
next time, it causing an use-after-free fault.
Fix it by not freeing "new_eba_tbl" after it replaced in
ubi_eba_replace_table(), while will be freed in next volume resizing.
Fixes: 801c135ce7 ("UBI: Unsorted Block Images")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e874dcde1c ]
UBIFS calculates available space by c->main_bytes - c->lst.total_used
(which means non-index lebs' free and dirty space is accounted into
total available), then index lebs and four lebs (one for gc_lnum, one
for deletions, two for journal heads) are deducted.
In following situation, ubifs may get -ENOSPC from make_reservation():
LEB 84: DATAHD free 122880 used 1920 dirty 2176 dark 6144
LEB 110:DELETION free 126976 used 0 dirty 0 dark 6144 (empty)
LEB 201:gc_lnum free 126976 used 0 dirty 0 dark 6144
LEB 272:GCHD free 77824 used 47672 dirty 1480 dark 6144
LEB 356:BASEHD free 0 used 39776 dirty 87200 dark 6144
OTHERS: index lebs, zero-available non-index lebs
UBIFS calculates the available bytes is 6888 (How to calculate it:
126976 * 5[remain main bytes] - 1920[used] - 47672[used] - 39776[used] -
126976 * 1[deletions] - 126976 * 1[gc_lnum] - 126976 * 2[journal heads]
- 6144 * 5[dark] = 6888) after doing budget, however UBIFS cannot use
BASEHD's dirty space(87200), because UBIFS cannot find next BASEHD to
reclaim current BASEHD. (c->bi.min_idx_lebs equals to c->lst.idx_lebs,
the empty leb won't be found by ubifs_find_free_space(), and dirty index
lebs won't be picked as gced lebs. All non-index lebs has dirty space
less then c->dead_wm, non-index lebs won't be picked as gced lebs
either. So new free lebs won't be produced.). See more details in Link.
To fix it, reserve one leb for each journal head while doing budget.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216562
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25fce616a6 ]
If target inode is a special file (eg. block/char device) with nlink
count greater than 1, the inode with ui->data will be re-written on
disk. However, UBIFS losts target inode's data_len while doing space
budget. Bad space budget may let make_reservation() return with -ENOSPC,
which could turn ubifs to read-only mode in do_writepage() process.
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216494
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b248eaf049 ]
Each dirty inode should reserve 'c->bi.inode_budget' bytes in space
budget calculation. Currently, space budget for dirty inode reports
more space than what UBIFS actually needs to write.
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b2ba09060 ]
There is no space budget for ubifs_xrename(). It may let
make_reservation() return with -ENOSPC, which could turn
ubifs to read-only mode in do_writepage() process.
Fix it by adding space budget for ubifs_xrename().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216569
Fixes: 9ec64962af ("ubifs: Implement RENAME_EXCHANGE")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
