This CL adds a new class to monitor and change
dual role usb ports from userspace. The usb
phy drivers can register to the dual_role_usb
class and expose the capabilities of the ports.
The phy drivers can decide on whether a specific
attribute can be changed from userspace by
choosing to implement the appropriate callback.
Cherry-picked from
https://android-review.googlesource.com/#/c/167310/
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Bug: 21615151
Change-Id: Id1c4aaa97e898264d7006381a7badd029b5d9789
Fix NULL pointer dereference while trying to link PTP
function to a gadget configuration without creating
MTP function.
PTP piggyback on MTP function so make sure we have
MTP function created beforehand. Otherwise we run
into following kernel panic:
-----------------------
[ 70.329957] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 70.330738] pgd = dd8ec000
[ 70.330916] [00000000] *pgd=00000000
[ 70.331663] Internal error: Oops: 805 [#1] SMP THUMB2
[ 70.332155] CPU: 0 PID: 2067 Comm: ln Not tainted 3.18.0-00587-gdfa582e #1
[ 70.332511] task: dd9c92c0 ti: dd822000 task.ti: dd822000
[ 70.333094] PC is at function_alloc_mtp_ptp+0xe/0x68
[ 70.333311] LR is at usb_get_function+0x11/0x1c
[ 70.333489] pc : [<c034ec12>] lr : [<c033cce9>] psr: 60070033
<..snip..>
[ 70.384111] 3fc0: bec14ae4 00000004 bec14c0a 00000053 00000004 b6f0422d 00000000 bec14adc
[ 70.384369] 3fe0: bec14af8 bec14a98 b6f071f3 b6e8977c 20070010 bec14c0d 00000000 00000000
[ 70.384832] [<c034ec12>] (function_alloc_mtp_ptp) from [<c033cce9>] (usb_get_function+0x11/0x1c)
[ 70.385146] [<c033cce9>] (usb_get_function) from [<c033da9b>] (config_usb_cfg_link+0x87/0xa8)
[ 70.385421] [<c033da9b>] (config_usb_cfg_link) from [<c011f417>] (configfs_symlink+0xb7/0x1c8)
[ 70.385696] [<c011f417>] (configfs_symlink) from [<c00dcd8d>] (vfs_symlink+0x85/0xc0)
[ 70.386010] [<c00dcd8d>] (vfs_symlink) from [<c00dce0b>] (SyS_symlinkat+0x43/0x70)
[ 70.386261] [<c00dce0b>] (SyS_symlinkat) from [<c000ce41>] (ret_fast_syscall+0x1/0x5c)
[ 70.386610] Code: eb04 4a0f 6e03 480f (e883) 0005
[ 70.387346] ---[ end trace 8dba7c552e02f8fa ]---
[ 70.387647] Kernel panic - not syncing: Fatal exception
[ 70.387980] ---[ end Kernel panic - not syncing: Fatal exception
-----------------------
Steps to reproduce the kernel panic:
mount -t configfs none /config
mkdir /config/usb_gadget/g1
cd /config/usb_gadget/g1
echo 0x18d1 > idVendor
echo 0x4e26 > idProduct
mkdir strings/0x409
echo 0123459876 > strings/0x409/serialnumber
echo Asus > strings/0x409/manufacturer
echo Nexus7 > strings/0x409/product
mkdir configs/c.1
mkdir configs/c.1/strings/0x409
echo "Conf 1" > configs/c.1/strings/0x409/configuration
echo 120 > configs/c.1/MaxPower
mkdir functions/ptp.ptp
ln -s functions/ptp.ptp configs/c.1/ptp.ptp
Also MTP and PTP are mutually exclusive functions
so make sure we have only one of it linked to a
configuration at a time. Otherwise it opens up
another set of bug(s?).
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Added a device attribute to android_device to
determine USB_GADGET's state
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I17f8903120df96bf2f4bf441940b53a87b818230
configfs_composite_unbind sets the gadget data
to null. Therefore, add check in disconnect
function to make sure that cdev is not NULL.
Prints a WARN message if the driver tries to
redundantly disconnect a gadget.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Change-Id: I248cb7175d0dd9a51c18053dd39475d8b3284f6d
This patch adds support to use Android accessory
gadget function through the
DECLARE_USB_FUNCTION_INIT interface.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Change-Id: Ib352752d5bc905fa1df9049b53eabf1294930db7
This patch adds support to use audio_source
gadget function through DECLARE_USB_FUNCTION_INIT
interface.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Change-Id: I1fc6c9ea07105ae4eb785eebd3bb925bfdd8bc6b
Added create_function_device to create child
function devices for USB gadget functions.
Android UsbDeviceManager relies on communicating
to the devices created by the gadget functions
to implement functions such as audio_source.
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I0df9ad86ac32d8cdacdea164e9fed49891b45fc2
While disabling ConfigFS Android gadget, android_disconnect() calls
kill_all_hid_devices(), if CONFIG_USB_CONFIGFS_F_ACC is enabled, to free
the registered HIDs without checking whether the USB accessory device
really exist or not. If USB accessory device doesn't exist then we run into
following kernel panic:
----8<----
[ 136.724761] Unable to handle kernel NULL pointer dereference at virtual address 00000064
[ 136.724809] pgd = c0204000
[ 136.731924] [00000064] *pgd=00000000
[ 136.737830] Internal error: Oops: 5 [#1] SMP ARM
[ 136.738108] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.0-rc4-00400-gf75300e-dirty #76
[ 136.742788] task: c0fb19d8 ti: c0fa4000 task.ti: c0fa4000
[ 136.750890] PC is at _raw_spin_lock_irqsave+0x24/0x60
[ 136.756246] LR is at kill_all_hid_devices+0x24/0x114
---->8----
This patch adds a test to check if USB Accessory device exists before freeing HIDs.
Change-Id: Ie229feaf0de3f4f7a151fcaa9a994e34e15ff73b
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Android userspace UsbDeviceManager relies on the
uevents generated by the composition driver to
generate user notifications. This CL adds uevents
to be generated whenever USB changes its state
i.e. connected, disconnected, configured.
This CL also intercepts the setup requests from
the usb_core anb routes it to the specific
usb function if required.
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: Ib3d3a78255a532f7449dac286f776c2966caf8c1
Add a pointer to the usb_function inside the
usb_function_instance structure to service
functions specific setup requests even before
the function gets added to the usb_gadget
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I6f457006f6c5516cc6986ec2acdf5b1ecf259d0c
This patch adds support to use mtp/ptp gadget functions
through the DECLARE_USB_FUNCTION_INIT interface.
enabling USB_CONFIGFS_F_MTP config compiles f_mtp.c
thereby providing support for MTP gadget
enabling USB_CONFIGFS_F_PTP config compiles f_ptp.c
thereby providing support for PTP gadget
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Change-Id: I38d7b570e8886d155ef10cd2c839b2232dcb3158
Fixed Android Issue #56549.
When both Vendor Class and Audio Class are activated for AOA 2.0,
the baInterfaceNr of the AudioControl Interface Descriptor points
to wrong interface numbers. They should be pointing to
Audio Control Device and Audio Streaming interfaces.
Replaced baInterfaceNr with the correct value.
Change-Id: Iaa083f3d97c1f0fc9481bf87852b2b51278a6351
Signed-off-by: Anson Jacob <ansonkuzhumbil@gmail.com>
Re-applying from
eb4c9d2db8
Most USB-AUDIO devices are limited to 256 byte for max iso buffer size.
If a IN_EP_MAX_PACKET_SIZE is bigger than a USB-AUDIO device's max iso
buffer size, it will cause noise. This patch will prevent this case as
possibe by reducing packet size. When using 44.1khz, 2ch, 16bit audio
data, if max packet size is bigger than 176 bytes, it's no problem.
Credits to: Iliyan Malchev <malchev@google.com>
Change-Id: Ic2a1c19ea65d5fb42bf12926b51b255b465d7215
Signed-off-by: Anson Jacob <ansonkuzhumbil@gmail.com>
Accessory connected to Android Device requires
Zero Length Packet (ZLP) to be written when data
transferred out from the Android device are multiples
of wMaxPacketSize (64bytes (Full-Speed) / 512bytes (High-Speed))
to end the transfer.
Change-Id: Ib2c2c0ab98ef9afa10e74a720142deca5c0ed476
Signed-off-by: Anson Jacob <ansonkuzhumbil@gmail.com>
Move the entire contents of linux/usb/f_accessory.h header to uapi,
it only contains a userspace interface.
Change-Id: Ieb5547da449588ae554988a201c0e6b4e3afc531
Signed-off-by: Colin Cross <ccross@android.com>
Move the most of linux/usb/f_mtp.h header to uapi. Move the only
remaining structure definition into f_mtp.c, the only place that
uses it.
Change-Id: I952c1a9dc15c36bf295a0eb4d74b6b1ad912ed03
Signed-off-by: Colin Cross <ccross@android.com>
create_bulk_endpoints should not be __init since it is called when
accessory is enabled.
Change-Id: Iac6e9f29d53c93760e926efd8e7603432632acb4
Signed-off-by: Todd Poynor <toddpoynor@google.com>
This driver presents a standard USB audio class interface to the host
and an ALSA PCM device to userspace
Change-Id: If16b14a5ff27045f9cb2daaf1ae9195c5eeab7d0
Signed-off-by: Mike Lockwood <lockwood@google.com>
The control request will be used by the host to enable/disable USB audio
and the ioctl will be used by userspace to read the audio mode
Change-Id: I81c38611b588451e80eacdccc417ca6e11c60cab
Signed-off-by: Mike Lockwood <lockwood@google.com>
create_bulk_endpoints should not be __init since it is called when
accessory is enabled
Change-Id: If827a4531f0f6c15af938345163923186368e2a5
Signed-off-by: Benoit Goby <benoit@android.com>
When adb is enabled, only connect the gadget when adbd is ready. If adbd
dies or is restarted (e.g. "adb root"), the gadget is disconnected when
the adb device is close, and it is re-connected once adb re-open the
device.
- Add callbacks to adb, similar to FunctionFs callbacks, to notify the
gadget when the daemon is ready or closed.
- Refcount calls to android_enable/android_disable to enable the gadget
only once all the function daemons are ready.
- Add enable/disble to android_usb_function to notify the function when
it is added/removed from the list of enabled functions.
Change-Id: Id54ff85aec9cf8715c94b4f9bd6137a79ad58bfc
Signed-off-by: Benoit Goby <benoit@android.com>
When an ep_out req is dequeued because of userspace freezing,
don't set the error flag.
Change-Id: I680f1a1059b8ac2244aaa069e7d42dc44abf98e9
Signed-off-by: Colin Cross <ccross@android.com>
wait_event_interruptible in adb_read might return -ERESTARTSYS if
userspace is frozen during adb_read or another signal is delivered
to adb. If so, don't set dev->error to avoid resetting the adb
connection.
Change-Id: I5a7baa013a9a3a3b5305de7e6a0d18546a560018
Signed-off-by: Colin Cross <ccross@android.com>
USB accessory mode allows users to connect USB host hardware
specifically designed for Android-powered devices. The accessories
must adhere to the Android accessory protocol outlined in the
http://accessories.android.com documentation. This allows
Android devices that cannot act as a USB host to still interact with
USB hardware. When an Android device is in USB accessory mode, the
attached Android USB accessory acts as the host, provides power
to the USB bus, and enumerates connected devices.
Change-Id: I67964b50d278f3c0471d47efbb7b0973a3502681
Signed-off-by: Mike Lockwood <lockwood@android.com>
Android Debug Bridge (adb) is a command line tool that lets
users communicate with a Android-powered device. It is used
mainly to debug applications and tranfer files. f_adb implements
the transport layer between the ADB Server (on the host) and the
ADBD daemon (on the device).
Change-Id: Ib11672fa3439dcb3a6588774b132b5a85e03e8ba
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB gadget function driver used by the Android framework to
implement the MTP and PTP protocols. It creates a character device
that provides an interface for fast transfer of files and
supports transferring files greater than 4GB.
Change-Id: I2d8f2c37029fb37d8deb791d04eb7346f94f5adb
Signed-off-by: Mike Lockwood <lockwood@android.com>
Since rx_bytes accounting does not include Ethernet Headers in
br_input.c, excluding ETH_HLEN on the transmit path for consistent
measurement of packet length on both the Tx and Rx chains.
The clean way would be for Rx to include the eth header, but the
skb len has already been adjusted by the time the br code sees the skb.
This is only a temporary workaround until we can completely ignore or
cleanly fix the skb->len handling.
Change-Id: I910de95a4686b2119da7f1f326e2154ef31f9972
Signed-off-by: Ashish Sharma <ashishsharma@google.com>
Some platforms do not want to power down rfkill devices on suspend.
Change-Id: I62a11630521c636d54a4a02ab9037a43435925f5
Signed-off-by: Nick Pelly <npelly@google.com>
IPv6 PMTUD has been updated to support UID-based routing.
Pass INVALID_UID as the socket UID to ip6_update_pmtu(),
otherwise we run into following build error:
----------------
CC net/ipv6/ip6_vti.o
net/ipv6/ip6_vti.c: In function ‘vti6_err’:
net/ipv6/ip6_vti.c:559:3: error: too few arguments to function ‘ip6_update_pmtu’
In file included from include/net/ip_tunnels.h:19:0,
from net/ipv6/ip6_vti.c:44:
include/net/ip6_route.h:110:6: note: declared here
make[2]: *** [net/ipv6/ip6_vti.o] Error 1
----------------
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
When using mark-based routing, sockets returned from accept()
may need to be marked differently depending on the incoming
connection request.
This is the case, for example, if different socket marks identify
different networks: a listening socket may want to accept
connections from all networks, but each connection should be
marked with the network that the request came in on, so that
subsequent packets are sent on the correct network.
This patch adds a sysctl to mark TCP sockets based on the fwmark
of the incoming SYN packet. If enabled, and an unmarked socket
receives a SYN, then the SYN packet's fwmark is written to the
connection's inet_request_sock, and later written back to the
accepted socket when the connection is established. If the
socket already has a nonzero mark, then the behaviour is the same
as it is today, i.e., the listening socket's fwmark is used.
Black-box tested using user-mode linux:
- IPv4/IPv6 SYN+ACK, FIN, etc. packets are routed based on the
mark of the incoming SYN packet.
- The socket returned by accept() is marked with the mark of the
incoming SYN packet.
- Tested with syncookies=1 and syncookies=2.
Change-Id: I26bc1eceefd2c588d73b921865ab70e4645ade57
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
