[ Upstream commit 64dd4a5a7d ]
In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.
Fixes: 332e081225 ("intel-vbtn: new driver for Intel Virtual Button")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71fbe886ce ]
In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.
Fixes: ecc83e52b2 ("intel-hid: new hid event driver for hotkeys")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b072714bfc ]
Once regulators are disabled after kernel boot, on Espresso board silent
hang observed because of LDO7 being disabled. LDO7 actually provide
power to CPU cores and non-cpu blocks circuitries. Keep this regulator
always-on to fix this hang.
Fixes: 9589f7721e ("arm64: dts: Add S2MPS15 PMIC node on exynos7-espresso")
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b6a1a162d ]
msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio
pin configurations. This was likely copied from the qcom kernel fork
where the same property was used for these audio pins.
However, "bias-pull-none" actually does not exist at all - not in
mainline and not in downstream. I can only guess that the original
intention was to configure "no pull", i.e. bias-disable.
Change it to that instead.
Fixes: 143bb9ad85 ("arm64: dts: qcom: add audio pinctrls")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200605185916.318494-2-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17ed808ad2 ]
When kobject_init_and_add() returns an error, it should be handled
because kobject_init_and_add() takes a reference even when it fails. If
this function returns an error, kobject_put() must be called to properly
clean up the memory associated with the object.
Therefore, replace calling kfree() and call kobject_put() and add a
missing kobject_put() in the edac_device_register_sysfs_main_kobj()
error path.
[ bp: Massage and merge into a single patch. ]
Fixes: b2ed215a33 ("Kobject: change drivers/edac to use kobject_init_and_add")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200528202238.18078-1-wu000273@umn.edu
Link: https://lkml.kernel.org/r/20200528203526.20908-1-wu000273@umn.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Add skcd->no_refcnt check which is missed when backporting
ad0f75e5f5 ("cgroup: fix cgroup_sk_alloc() for sk_clone_lock()").
This patch is needed in stable-4.9, stable-4.14 and stable-4.19.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f3751ad011 upstream.
__tracepoint_string's have their string data stored in .rodata, and an
address to that data stored in the "__tracepoint_str" section. Functions
that refer to those strings refer to the symbol of the address. Compiler
optimization can replace those address references with references
directly to the string data. If the address doesn't appear to have other
uses, then it appears dead to the compiler and is removed. This can
break the /tracing/printk_formats sysfs node which iterates the
addresses stored in the "__tracepoint_str" section.
Like other strings stored in custom sections in this header, mark these
__used to inform the compiler that there are other non-obvious users of
the address, so they should still be emitted.
Link: https://lkml.kernel.org/r/20200730224555.2142154-2-ndesaulniers@google.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 102c9323c3 ("tracing: Add __tracepoint_string() to export string pointers")
Reported-by: Tim Murray <timmurray@google.com>
Reported-by: Simon MacMullen <simonmacm@google.com>
Suggested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit beb4ee6770 upstream.
smk_write_relabel_self() frees memory from the task's credentials with
no locking, which can easily cause a use-after-free because multiple
tasks can share the same credentials structure.
Fix this by using prepare_creds() and commit_creds() to correctly modify
the task's credentials.
Reproducer for "BUG: KASAN: use-after-free in smk_write_relabel_self":
#include <fcntl.h>
#include <pthread.h>
#include <unistd.h>
static void *thrproc(void *arg)
{
int fd = open("/sys/fs/smackfs/relabel-self", O_WRONLY);
for (;;) write(fd, "foo", 3);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thrproc, NULL);
thrproc(NULL);
}
Reported-by: syzbot+e6416dabb497a650da40@syzkaller.appspotmail.com
Fixes: 38416e5393 ("Smack: limited capability for changing process label")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a0dced17ad ]
This reverts commit 71130f2997.
In commit 71130f2997 ("vxlan: fix tos value before xmit") we want to
make sure the tos value are filtered by RT_TOS() based on RFC1349.
0 1 2 3 4 5 6 7
+-----+-----+-----+-----+-----+-----+-----+-----+
| PRECEDENCE | TOS | MBZ |
+-----+-----+-----+-----+-----+-----+-----+-----+
But RFC1349 has been obsoleted by RFC2474. The new DSCP field defined like
0 1 2 3 4 5 6 7
+-----+-----+-----+-----+-----+-----+-----+-----+
| DS FIELD, DSCP | ECN FIELD |
+-----+-----+-----+-----+-----+-----+-----+-----+
So with
IPTOS_TOS_MASK 0x1E
RT_TOS(tos) ((tos)&IPTOS_TOS_MASK)
the first 3 bits DSCP info will get lost.
To take all the DSCP info in xmit, we should revert the patch and just push
all tos bits to ip_tunnel_ecn_encap(), which will handling ECN field later.
Fixes: 71130f2997 ("vxlan: fix tos value before xmit")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ea060b3526 ]
Drop the bogus endpoint-lookup helper which could end up accepting
interfaces based on endpoints belonging to unrelated altsettings.
Note that the returned bulk pipes and interrupt endpoint descriptor
were never actually used. Instead the bulk-endpoint numbers are
hardcoded to 1 and 2 (matching the specification), while the interrupt-
endpoint descriptor was assumed to be the third descriptor created by
USB core.
Try to bring some order to this by dropping the bogus lookup helper and
adding the missing endpoint sanity checks while keeping the interrupt-
descriptor assumption for now.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b5141915b5 ]
The commit cited below removed the RCU read-side critical section from
rtnl_fdb_dump() which means that the ndo_fdb_dump() callback is invoked
without RCU protection.
This results in the following warning [1] in the VXLAN driver, which
relied on the callback being invoked from an RCU read-side critical
section.
Fix this by calling rcu_read_lock() in the VXLAN driver, as already done
in the bridge driver.
[1]
WARNING: suspicious RCU usage
5.8.0-rc4-custom-01521-g481007553ce6 #29 Not tainted
-----------------------------
drivers/net/vxlan.c:1379 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by bridge/166:
#0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xea/0x1090
stack backtrace:
CPU: 1 PID: 166 Comm: bridge Not tainted 5.8.0-rc4-custom-01521-g481007553ce6 #29
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack+0x100/0x184
lockdep_rcu_suspicious+0x153/0x15d
vxlan_fdb_dump+0x51e/0x6d0
rtnl_fdb_dump+0x4dc/0xad0
netlink_dump+0x540/0x1090
__netlink_dump_start+0x695/0x950
rtnetlink_rcv_msg+0x802/0xbd0
netlink_rcv_skb+0x17a/0x480
rtnetlink_rcv+0x22/0x30
netlink_unicast+0x5ae/0x890
netlink_sendmsg+0x98a/0xf40
__sys_sendto+0x279/0x3b0
__x64_sys_sendto+0xe6/0x1a0
do_syscall_64+0x54/0xa0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fe14fa2ade0
Code: Bad RIP value.
RSP: 002b:00007fff75bb5b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00005614b1ba0020 RCX: 00007fe14fa2ade0
RDX: 000000000000011c RSI: 00007fff75bb5b90 RDI: 0000000000000003
RBP: 00007fff75bb5b90 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00005614b1b89160
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Fixes: 5e6d243587 ("bridge: netlink dump interface at par with brctl")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8c0de6e96c ]
IPV6_ADDRFORM causes resource leaks when converting an IPv6 socket
to IPv4, particularly struct ipv6_ac_socklist. Similar to
struct ipv6_mc_socklist, we should just close it on this path.
This bug can be easily reproduced with the following C program:
#include <stdio.h>
#include <string.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <arpa/inet.h>
int main()
{
int s, value;
struct sockaddr_in6 addr;
struct ipv6_mreq m6;
s = socket(AF_INET6, SOCK_DGRAM, 0);
addr.sin6_family = AF_INET6;
addr.sin6_port = htons(5000);
inet_pton(AF_INET6, "::ffff:192.168.122.194", &addr.sin6_addr);
connect(s, (struct sockaddr *)&addr, sizeof(addr));
inet_pton(AF_INET6, "fe80::AAAA", &m6.ipv6mr_multiaddr);
m6.ipv6mr_interface = 5;
setsockopt(s, SOL_IPV6, IPV6_JOIN_ANYCAST, &m6, sizeof(m6));
value = AF_INET;
setsockopt(s, SOL_IPV6, IPV6_ADDRFORM, &value, sizeof(value));
close(s);
return 0;
}
Reported-by: ch3332xr@gmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 83f3522860 ]
fib_trie_unmerge() is called with RTNL held, but not from an RCU
read-side critical section. This leads to the following warning [1] when
the FIB alias list in a leaf is traversed with
hlist_for_each_entry_rcu().
Since the function is always called with RTNL held and since
modification of the list is protected by RTNL, simply use
hlist_for_each_entry() and silence the warning.
[1]
WARNING: suspicious RCU usage
5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Not tainted
-----------------------------
net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/164:
#0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0
stack backtrace:
CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack+0x100/0x184
lockdep_rcu_suspicious+0x153/0x15d
fib_trie_unmerge+0x608/0xdb0
fib_unmerge+0x44/0x360
fib4_rule_configure+0xc8/0xad0
fib_nl_newrule+0x37a/0x1dd0
rtnetlink_rcv_msg+0x4f7/0xbd0
netlink_rcv_skb+0x17a/0x480
rtnetlink_rcv+0x22/0x30
netlink_unicast+0x5ae/0x890
netlink_sendmsg+0x98a/0xf40
____sys_sendmsg+0x879/0xa00
___sys_sendmsg+0x122/0x190
__sys_sendmsg+0x103/0x1d0
__x64_sys_sendmsg+0x7d/0xb0
do_syscall_64+0x54/0xa0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fc80a234e97
Code: Bad RIP value.
RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97
RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003
RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000
R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001
R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020
Fixes: 0ddcf43d5d ("ipv4: FIB Local/MAIN table collapse")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b836a1426 upstream.
Binder is designed such that a binder_proc never has references to
itself. If this rule is violated, memory corruption can occur when a
process sends a transaction to itself; see e.g.
<https://syzkaller.appspot.com/bug?extid=09e05aba06723a94d43d>.
There is a remaining edgecase through which such a transaction-to-self
can still occur from the context of a task with BINDER_SET_CONTEXT_MGR
access:
- task A opens /dev/binder twice, creating binder_proc instances P1
and P2
- P1 becomes context manager
- P2 calls ACQUIRE on the magic handle 0, allocating index 0 in its
handle table
- P1 dies (by closing the /dev/binder fd and waiting a bit)
- P2 becomes context manager
- P2 calls ACQUIRE on the magic handle 0, allocating index 1 in its
handle table
[this triggers a warning: "binder: 1974:1974 tried to acquire
reference to desc 0, got 1 instead"]
- task B opens /dev/binder once, creating binder_proc instance P3
- P3 calls P2 (via magic handle 0) with (void*)1 as argument (two-way
transaction)
- P2 receives the handle and uses it to call P3 (two-way transaction)
- P3 calls P2 (via magic handle 0) (two-way transaction)
- P2 calls P2 (via handle 1) (two-way transaction)
And then, if P2 does *NOT* accept the incoming transaction work, but
instead closes the binder fd, we get a crash.
Solve it by preventing the context manager from using ACQUIRE on ref 0.
There shouldn't be any legitimate reason for the context manager to do
that.
Additionally, print a warning if someone manages to find another way to
trigger a transaction-to-self bug in the future.
Cc: stable@vger.kernel.org
Fixes: 457b9a6f09 ("Staging: android: add binder driver")
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Martijn Coenen <maco@android.com>
Link: https://lore.kernel.org/r/20200727120424.1627555-1-jannh@google.com
[manual backport: remove fine-grained locking and error reporting that
don't exist in <=4.9]
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08b5d5014a upstream.
set/removexattr on an exported filesystem should break NFS delegations.
This is true in general, but also for the upcoming support for
RFC 8726 (NFSv4 extended attribute support). Make sure that they do.
Additionally, they need to grow a _locked variant, since callers might
call this with i_rwsem held (like the NFS server code).
Cc: stable@vger.kernel.org # v4.9+
Cc: linux-fsdevel@vger.kernel.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e24c6447cc ]
I compiled with AddressSanitizer and I had these memory leaks while I
was using the tep_parse_format function:
Direct leak of 28 byte(s) in 4 object(s) allocated from:
#0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
#1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985
#2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140
#3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206
#4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291
#5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299
#6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849
#7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161
#8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207
#9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786
#10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285
#11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369
#12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335
#13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389
#14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431
#15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251
#16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284
#17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593
#18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727
#19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048
#20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127
#21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152
#22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252
#23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347
#24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461
#25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673
#26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)
The token variable in the process_dynamic_array_len function is
allocated in the read_expect_type function, but is not freed before
calling the read_token function.
Free the token variable before calling read_token in order to plug the
leak.
Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51875dad43 ]
atmtcp_remove_persistent() invokes atm_dev_lookup(), which returns a
reference of atm_dev with increased refcount or NULL if fails.
The refcount leaks issues occur in two error handling paths. If
dev_data->persist is zero or PRIV(dev)->vcc isn't NULL, the function
returns 0 without decreasing the refcount kept by a local variable,
resulting in refcount leaks.
Fix the issue by adding atm_dev_put() before returning 0 both when
dev_data->persist is zero or PRIV(dev)->vcc isn't NULL.
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 024a8168b7 ]
We observed two panics involving races with igb_reset_task.
The first panic is caused by this race condition:
kworker reboot -f
igb_reset_task
igb_reinit_locked
igb_down
napi_synchronize
__igb_shutdown
igb_clear_interrupt_scheme
igb_free_q_vectors
igb_free_q_vector
adapter->q_vector[v_idx] = NULL;
napi_disable
Panics trying to access
adapter->q_vector[v_idx].napi_state
The second panic (a divide error) is caused by this race:
kworker reboot -f tx packet
igb_reset_task
__igb_shutdown
rtnl_lock()
...
igb_clear_interrupt_scheme
igb_free_q_vectors
adapter->num_tx_queues = 0
...
rtnl_unlock()
rtnl_lock()
igb_reinit_locked
igb_down
igb_up
netif_tx_start_all_queues
dev_hard_start_xmit
igb_xmit_frame
igb_tx_queue_mapping
Panics on
r_idx % adapter->num_tx_queues
This commit applies to igb_reset_task the same changes that
were applied to ixgbe in commit 2f90b8657e ("ixgbe: this patch
adds support for DCB to the kernel and ixgbe driver"),
commit 8f4c5c9fb8 ("ixgbe: reinit_locked() should be called with
rtnl_lock") and commit 88adce4ea8 ("ixgbe: fix possible race in
reset subtask").
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4052d3d2e8 ]
In the case where a vendor command does not implement doit, and has no
flags set, doit would not be validated and a NULL pointer dereference
would occur, for example when invoking the vendor command via iw.
I encountered this while developing new vendor commands. Perhaps in
practice it is advisable to always implement doit along with dumpit,
but it seems reasonable to me to always check doit anyway, not just
when NEED_WDEV.
Signed-off-by: Julian Squires <julian@cipht.net>
Link: https://lore.kernel.org/r/20200706211353.2366470-1-julian@cipht.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit eca21c2d86 upstream.
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: 375446df95 ("leds: 88pm860x: Use devm_led_classdev_register")
Cc: stable <stable@vger.kernel.org> # 4.6
Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d584221e68 upstream.
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: 50154e29e5 ("leds: lm3533: Use devm_led_classdev_register")
Cc: stable <stable@vger.kernel.org> # 4.6
Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f4aa35744 upstream.
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: eed16255d6 ("leds: da903x: Use devm_led_classdev_register")
Cc: stable <stable@vger.kernel.org> # 4.6
Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47a459ecc8 upstream.
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: 8d3b6a4001 ("leds: wm831x-status: Use devm_led_classdev_register")
Cc: stable <stable@vger.kernel.org> # 4.6
Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f7e6b19bc7 upstream.
When doing a "write" ioctl call, properly check that we have permissions
to do so before copying anything from userspace or anything else so we
can "fail fast". This includes also covering the MEMWRITE ioctl which
previously missed checking for this.
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[rw: Fixed locking issue]
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebfdfeeae8 upstream.
vgacon_scrollback_update() always leaves enbough room in the scrollback
buffer for the next call, but if the console size changed that room
might not actually be enough, and so we need to re-check.
The check should be in the loop since vgacon_scrollback_cur->tail is
updated in the loop and count may be more than 1 when triggered by CSI M,
as Jiri's PoC:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <fcntl.h>
int main(int argc, char** argv)
{
int fd = open("/dev/tty1", O_RDWR);
unsigned short size[3] = {25, 200, 0};
ioctl(fd, 0x5609, size); // VT_RESIZE
write(fd, "\e[1;1H", 6);
for (int i = 0; i < 30; i++)
write(fd, "\e[10M", 5);
}
It leads to various crashes as vgacon_scrollback_update writes out of
the buffer:
BUG: unable to handle page fault for address: ffffc900001752a0
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
RIP: 0010:mutex_unlock+0x13/0x30
...
Call Trace:
n_tty_write+0x1a0/0x4d0
tty_write+0x1a0/0x2e0
Or to KASAN reports:
BUG: KASAN: slab-out-of-bounds in vgacon_scroll+0x57a/0x8ed
This fixes CVE-2020-14331.
Reported-by: 张云海 <zhangyunhai@nsfocus.com>
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Fixes: 15bdab959c ([PATCH] vgacon: Add support for soft scrollback)
Cc: stable@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Solar Designer <solar@openwall.com>
Cc: "Srivatsa S. Bhat" <srivatsa@csail.mit.edu>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Yunhai Zhang <zhangyunhai@nsfocus.com>
Link: https://lore.kernel.org/r/9fb43895-ca91-9b07-ebfd-808cf854ca95@nsfocus.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support for phys switch id ndo added for representors and if
we do not have representors there is no need to support it.
Since each port return different switch id supporting this
block support for creating bond over PFs and attaching to bridge
in legacy mode.
This bug doesn't exist upstream as the code got refactored and the
netdev api is totally different.
Fixes: cb67b83292 ("net/mlx5e: Introduce SRIOV VF representors")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d2a4309c1a upstream.
When running qmi-firmware-update on the Sierra Wireless EM7305 in a Toshiba
laptop, it changed product ID to 0x9062 when entering QDL mode:
usb 2-4: new high-speed USB device number 78 using xhci_hcd
usb 2-4: New USB device found, idVendor=1199, idProduct=9062, bcdDevice= 0.00
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: EM7305
usb 2-4: Manufacturer: Sierra Wireless, Incorporated
The upgrade could complete after running
# echo 1199 9062 > /sys/bus/usb-serial/drivers/qcserial/new_id
qcserial 2-4:1.0: Qualcomm USB modem converter detected
usb 2-4: Qualcomm USB modem converter now attached to ttyUSB0
Signed-off-by: Erik Ekman <erik@kryo.se>
Link: https://lore.kernel.org/r/20200717185118.3640219-1-erik@kryo.se
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is used to fix ext4 direct I/O read error when
the read size is not aligned with block size.
Then, I will use a test to explain the error.
(1) Make a file that is not aligned with block size:
$dd if=/dev/zero of=./test.jar bs=1000 count=3
(2) I wrote a source file named "direct_io_read_file.c" as following:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/file.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <string.h>
#define BUF_SIZE 1024
int main()
{
int fd;
int ret;
unsigned char *buf;
ret = posix_memalign((void **)&buf, 512, BUF_SIZE);
if (ret) {
perror("posix_memalign failed");
exit(1);
}
fd = open("./test.jar", O_RDONLY | O_DIRECT, 0755);
if (fd < 0){
perror("open ./test.jar failed");
exit(1);
}
do {
ret = read(fd, buf, BUF_SIZE);
printf("ret=%d\n",ret);
if (ret < 0) {
perror("write test.jar failed");
}
} while (ret > 0);
free(buf);
close(fd);
}
(3) Compile the source file:
$gcc direct_io_read_file.c -D_GNU_SOURCE
(4) Run the test program:
$./a.out
The result is as following:
ret=1024
ret=1024
ret=952
ret=-1
write test.jar failed: Invalid argument.
I have tested this program on XFS filesystem, XFS does not have
this problem, because XFS use iomap_dio_rw() to do direct I/O
read. And the comparing between read offset and file size is done
in iomap_dio_rw(), the code is as following:
if (pos < size) {
retval = filemap_write_and_wait_range(mapping, pos,
pos + iov_length(iov, nr_segs) - 1);
if (!retval) {
retval = mapping->a_ops->direct_IO(READ, iocb,
iov, pos, nr_segs);
}
...
}
...only when "pos < size", direct I/O can be done, or 0 will be return.
I have tested the fix patch on Ext4, it is up to the mustard of
EINVAL in man2(read) as following:
#include <unistd.h>
ssize_t read(int fd, void *buf, size_t count);
EINVAL
fd is attached to an object which is unsuitable for reading;
or the file was opened with the O_DIRECT flag, and either the
address specified in buf, the value specified in count, or the
current file offset is not suitably aligned.
So I think this patch can be applied to fix ext4 direct I/O error.
However Ext4 introduces direct I/O read using iomap infrastructure
on kernel 5.5, the patch is commit <b1b4705d54ab>
("ext4: introduce direct I/O read using iomap infrastructure"),
then Ext4 will be the same as XFS, they all use iomap_dio_rw() to do direct
I/O read. So this problem does not exist on kernel 5.5 for Ext4.
>From above description, we can see this problem exists on all the kernel
versions between kernel 3.14 and kernel 5.4. It will cause the Applications
to fail to read. For example, when the search service downloads a new full
index file, the search engine is loading the previous index file and is
processing the search request, it can not use buffer io that may squeeze
the previous index file in use from pagecache, so the serch service must
use direct I/O read.
Please apply this patch on these kernel versions, or please use the method
on kernel 5.5 to fix this problem.
Fixes: 9fe55eea7e ("Fix race when checking i_size on direct i/o read")
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Wang Long <wanglong19@meituan.com>
Signed-off-by: Jiang Ying <jiangying8582@126.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0842fbc1b upstream.
The addition of percpu.h to the list of includes in random.h revealed
some circular dependencies on arm64 and possibly other platforms. This
include was added solely for the pseudo-random definitions, which have
nothing to do with the rest of the definitions in this file but are
still there for legacy reasons.
This patch moves the pseudo-random parts to linux/prandom.h and the
percpu.h include with it, which is now guarded by _LINUX_PRANDOM_H and
protected against recursive inclusion.
A further cleanup step would be to remove this from <linux/random.h>
entirely, and make people who use the prandom infrastructure include
just the new header file. That's a bit of a churn patch, but grepping
for "prandom_" and "next_pseudo_random32" "struct rnd_state" should
catch most users.
But it turns out that that nice cleanup step is fairly painful, because
a _lot_ of code currently seems to depend on the implicit include of
<linux/random.h>, which can currently come in a lot of ways, including
such fairly core headfers as <linux/net.h>.
So the "nice cleanup" part may or may never happen.
Fixes: 1c9df907da ("random: fix circular include dependency on arm64 after addition of percpu.h")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83bdc7275e upstream.
It turns out that the plugin right now ends up being really unhappy
about the change from 'static' to 'extern' storage that happened in
commit f227e3ec3b ("random32: update the net random state on interrupt
and activity").
This is probably a trivial fix for the latent_entropy plugin, but for
now, just remove net_rand_state from the list of things the plugin
worries about.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c9df907da upstream.
Daniel Díaz and Kees Cook independently reported that commit
f227e3ec3b ("random32: update the net random state on interrupt and
activity") broke arm64 due to a circular dependency on include files
since the addition of percpu.h in random.h.
The correct fix would definitely be to move all the prandom32 stuff out
of random.h but for backporting, a smaller solution is preferred.
This one replaces linux/percpu.h with asm/percpu.h, and this fixes the
problem on x86_64, arm64, arm, and mips. Note that moving percpu.h
around didn't change anything and that removing it entirely broke
differently. When backporting, such options might still be considered
if this patch fails to help.
[ It turns out that an alternate fix seems to be to just remove the
troublesome <asm/pointer_auth.h> remove from the arm64 <asm/smp.h>
that causes the circular dependency.
But we might as well do the whole belt-and-suspenders thing, and
minimize inclusion in <linux/random.h> too. Either will fix the
problem, and both are good changes. - Linus ]
Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Reported-by: Kees Cook <keescook@chromium.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Fixes: f227e3ec3b
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa54ea903a upstream.
Fix build error for the case:
defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6)
config: keystone_defconfig
CC arch/arm/kernel/signal.o
In file included from ../include/linux/random.h:14,
from ../arch/arm/kernel/signal.c:8:
../arch/arm/include/asm/percpu.h: In function ‘__my_cpu_offset’:
../arch/arm/include/asm/percpu.h:29:34: error: ‘current_stack_pointer’ undeclared (first use in this function); did you mean ‘user_stack_pointer’?
: "Q" (*(const unsigned long *)current_stack_pointer));
^~~~~~~~~~~~~~~~~~~~~
user_stack_pointer
Fixes: f227e3ec3b ("random32: update the net random state on interrupt and activity")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f227e3ec3b upstream.
This modifies the first 32 bits out of the 128 bits of a random CPU's
net_rand_state on interrupt or CPU activity to complicate remote
observations that could lead to guessing the network RNG's internal
state.
Note that depending on some network devices' interrupt rate moderation
or binding, this re-seeding might happen on every packet or even almost
never.
In addition, with NOHZ some CPUs might not even get timer interrupts,
leaving their local state rarely updated, while they are running
networked processes making use of the random state. For this reason, we
also perform this update in update_process_times() in order to at least
update the state when there is user or system activity, since it's the
only case we care about.
Reported-by: Amit Klein <aksecurity@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bdd6558959 upstream.
0day reported a possible circular locking dependency:
Chain exists of:
&irq_desc_lock_class --> console_owner --> &port_lock_key
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&port_lock_key);
lock(console_owner);
lock(&port_lock_key);
lock(&irq_desc_lock_class);
The reason for this is a printk() in the i8259 interrupt chip driver
which is invoked with the irq descriptor lock held, which reverses the
lock operations vs. printk() from arbitrary contexts.
Switch the printk() to printk_deferred() to avoid that.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87365abt2v.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c2c6331064 ]
There's a potential race in xennet_remove(); this is what the driver is
doing upon unregistering a network device:
1. state = read bus state
2. if state is not "Closed":
3. request to set state to "Closing"
4. wait for state to be set to "Closing"
5. request to set state to "Closed"
6. wait for state to be set to "Closed"
If the state changes to "Closed" immediately after step 1 we are stuck
forever in step 4, because the state will never go back from "Closed" to
"Closing".
Make sure to check also for state == "Closed" in step 4 to prevent the
deadlock.
Also add a 5 sec timeout any time we wait for the bus state to change,
to avoid getting stuck forever in wait_event().
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0db9254d6b ]
This reverts commit d358def706.
There are two issues with "i2c: cadence: Fix the hold bit setting" commit.
1. In case of combined message request from user space, when the HOLD
bit is cleared in cdns_i2c_mrecv function, a STOP condition is sent
on the bus even before the last message is started. This is because when
the HOLD bit is cleared, the FIFOS are empty and there is no pending
transfer. The STOP condition should occur only after the last message
is completed.
2. The code added by the commit is redundant. Driver is handling the
setting/clearing of HOLD bit in right way before the commit.
The setting of HOLD bit based on 'bus_hold_flag' is taken care in
cdns_i2c_master_xfer function even before cdns_i2c_msend/cdns_i2c_recv
functions.
The clearing of HOLD bit is taken care at the end of cdns_i2c_msend and
cdns_i2c_recv functions based on bus_hold_flag and byte count.
Since clearing of HOLD bit is done after the slave address is written to
the register (writing to address register triggers the message transfer),
it is ensured that STOP condition occurs at the right time after
completion of the pending transfer (last message).
Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 015c5d5e6a ]
According to the report of [1], this driver is possible to cause
the following error in ravb_tx_timeout_work().
ravb e6800000.ethernet ethernet: failed to switch device to config mode
This error means that the hardware could not change the state
from "Operation" to "Configuration" while some tx and/or rx queue
are operating. After that, ravb_config() in ravb_dmac_init() will fail,
and then any descriptors will be not allocaled anymore so that NULL
pointer dereference happens after that on ravb_start_xmit().
To fix the issue, the ravb_tx_timeout_work() should check
the return values of ravb_stop_dma() and ravb_dmac_init().
If ravb_stop_dma() fails, ravb_tx_timeout_work() re-enables TX and RX
and just exits. If ravb_dmac_init() fails, just exits.
[1]
https://lore.kernel.org/linux-renesas-soc/20200518045452.2390-1-dirk.behme@de.bosch.com/
Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b344d6a83d ]
The kernel test bot reported[1] that using set_mask_bits on a u8 causes
the following issue on parisc:
hppa-linux-ld: drivers/phy/ti/phy-tusb1210.o: in function `tusb1210_probe':
>> (.text+0x2f4): undefined reference to `__cmpxchg_called_with_bad_pointer'
>> hppa-linux-ld: (.text+0x324): undefined reference to `__cmpxchg_called_with_bad_pointer'
hppa-linux-ld: (.text+0x354): undefined reference to `__cmpxchg_called_with_bad_pointer'
Add support for cmpxchg on u8 pointers.
[1] https://lore.kernel.org/patchwork/patch/1272617/#1468946
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Tested-by: Dave Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
