[ Upstream commit 33e9032a1875bb1aee3c68a4540f5a577ff44130 ]
Add the missing regulator supplies to the ADV7533 HDMI bridge to fix
the following dtbs_check warnings. They are all also supplied by
pm8916_l6 so there is no functional difference.
apq8016-sbc.dtb: bridge@39: 'dvdd-supply' is a required property
apq8016-sbc.dtb: bridge@39: 'pvdd-supply' is a required property
apq8016-sbc.dtb: bridge@39: 'a2vdd-supply' is a required property
from schema display/bridge/adi,adv7533.yaml
Fixes: 28546b0955 ("arm64: dts: apq8016-sbc: Add HDMI display support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230922-db410c-adv7533-regulators-v1-1-68aba71e529b@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0878fd86f554ab98aa493996c7e0c72dff58437f ]
Both the CN9130-CRB and CN9130-DB use the SPI1 interface but had the
pinctrl node labelled as "cp0_spi0_pins". Use the label "cp0_spi1_pins"
and update the node name to "cp0-spi-pins-1" to avoid confusion with the
pinctrl options for SPI0.
Fixes: 4c43a41e5b ("arm64: dts: cn913x: add device trees for topology B boards")
Fixes: 5c0ee54723 ("arm64: dts: add support for Marvell cn9130-crb platform")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f32096602c19e68fb9bf04b494d13f1190602554 ]
There are two entries for similar reserved memory: qseecom@cb400000 and
audio@cb400000. Keep the qseecom as it is longer.
Warning (unique_unit_address_if_enabled): /reserved-memory/audio@cb400000: duplicate unit-address (also used in node /reserved-memory/qseecom@cb400000)
Fixes: 69876bc6fd ("arm64: dts: qcom: msm8992-libra: Fix the memory map")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230720072048.10093-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b805cafc604bfdb671fae7347a57f51154afa735 ]
When we fail to register the uncore pmu, the pmu context may not been
allocated. The error handing will call cpuhp_state_remove_instance()
to call uncore pmu offline callback, which migrate the pmu context.
Since that's liable to lead to some kind of use-after-free.
Use cpuhp_state_remove_instance_nocalls() instead of
cpuhp_state_remove_instance() so that the notifiers don't execute after
the PMU device has been failed to register.
Fixes: a0ab25cd82 ("drivers/perf: hisi: Add support for HiSilicon PA PMU driver")
FIxes: 3bf30882c3 ("drivers/perf: hisi: Add support for HiSilicon SLLC PMU driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Link: https://lore.kernel.org/r/20231024113630.13472-1-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d7d51e88e21c0af1ca96a3617afef334bfeffcf ]
Check whether the event type matches the PMU type firstly in
pmu::event_init() before touching the event. Otherwise we'll
change the events of others and lead to incorrect results.
Since in perf_init_event() we may call every pmu's event_init()
in a certain case, we should not modify the event if it's not
ours.
Fixes: 8404b0fbc7 ("drivers/perf: hisi: Add driver for HiSilicon PCIe PMU")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20231024092954.42297-2-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7819e05a0d ]
CMN implements a set of CoreSight-format peripheral ID registers which
in principle we should be able to use to identify the hardware. However
so far we have avoided trying to use the part number field since the
TRMs have all described it as "configuration dependent". It turns out,
though, that this is a quirk of the documentation generation process,
and in fact the part number should always be a stable well-defined field
which we can trust.
To that end, revamp our model detection to rely less on ACPI/DT, and
pave the way towards further using the hardware information as an
identifier for userspace jevent metrics. This includes renaming the
revision constants to maximise readability.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/3c791eaae814b0126f9adbd5419bfb4a600dade7.1686588640.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Stable-dep-of: e3e73f511c49 ("perf/arm-cmn: Fix DTC domain detection")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50b560783f7f71790bcf70e9e9855155fb0af8c1 ]
When tearing down a 'hisi_hns3' PMU, we mistakenly run the CPU hotplug
callbacks after the device has been unregistered, leading to fireworks
when we try to execute empty function callbacks within the driver:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
| CPU: 0 PID: 15 Comm: cpuhp/0 Tainted: G W O 5.12.0-rc4+ #1
| Hardware name: , BIOS KpxxxFPGA 1P B600 V143 04/22/2021
| pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--)
| pc : perf_pmu_migrate_context+0x98/0x38c
| lr : perf_pmu_migrate_context+0x94/0x38c
|
| Call trace:
| perf_pmu_migrate_context+0x98/0x38c
| hisi_hns3_pmu_offline_cpu+0x104/0x12c [hisi_hns3_pmu]
Use cpuhp_state_remove_instance_nocalls() instead of
cpuhp_state_remove_instance() so that the notifiers don't execute after
the PMU device has been unregistered.
Fixes: 66637ab137 ("drivers/perf: hisi: add driver for HNS3 PMU")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20231019091352.998964-1-shaojijie@huawei.com
[will: Rewrote commit message]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5855d422a6f250f3518f43b49092c8e87a5e42be ]
Due to the initial confusion about MIPI_DSI_MODE_EOT_PACKET, properly
renamed to MIPI_DSI_MODE_NO_EOT_PACKET, reflecting its actual meaning,
both the DSI_TXRX_CON register setting for bit (HSTX_)DIS_EOT and the
later calculation for horizontal sync-active (HSA), back (HBP) and
front (HFP) porches got incorrect due to the logic being inverted.
This means that a number of settings were wrong because....:
- DSI_TXRX_CON register setting: bit (HSTX_)DIS_EOT should be
set in order to disable the End of Transmission packet;
- Horizontal Sync and Back/Front porches: The delta used to
calculate all of HSA, HBP and HFP should account for the
additional EOT packet.
Before this change...
- Bit (HSTX_)DIS_EOT was being set when EOT packet was enabled;
- For HSA/HBP/HFP delta... all three were wrong, as words were
added when EOT disabled, instead of when EOT packet enabled!
Invert the logic around flag MIPI_DSI_MODE_NO_EOT_PACKET in the
MediaTek DSI driver to fix the aforementioned issues.
Fixes: 8b2b99fd79 ("drm/mediatek: dsi: Fine tune the line time caused by EOTp")
Fixes: c87d1c4b5b ("drm/mediatek: dsi: Use symbolized register definition")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Tested-by: Michael Walle <mwalle@kernel.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230523104234.7849-1-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 851354cbd12bb9500909733c3d4054306f61df87 ]
The AppliedMicro XGene-1 CPU has an erratum where the timer condition
would only consider TVAL, not CVAL. We currently apply a workaround when
seeing the PartNum field of MIDR_EL1 being 0x000, under the assumption
that this would match only the XGene-1 CPU model.
However even the Ampere eMAG (aka XGene-3) uses that same part number, and
only differs in the "Variant" and "Revision" fields: XGene-1's MIDR is
0x500f0000, our eMAG reports 0x503f0002. Experiments show the latter
doesn't show the faulty behaviour.
Increase the specificity of the check to only consider partnum 0x000 and
variant 0x00, to exclude the Ampere eMAG.
Fixes: 012f188504 ("clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations")
Reported-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20231016153127.116101-1-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e05be78264594634860087953649487f486ffcc ]
If the drm/msm init code gets an error during output modeset
initialisation, the kernel will report an error regarding DRM memory
manager not being clean during shutdown. This is because
msm_dsi_modeset_init() allocates a piece of GEM memory for the TX
buffer, but destruction of the buffer happens only at
msm_dsi_host_destroy(), which is called during DSI driver's remove()
time, much later than the DRM MM shutdown.
To solve this issue, move the TX buffer destruction to dsi_unbind(), so
that the buffer is destructed at the correct time. Note, we also have to
store a reference to the address space, because priv->kms->aspace is
cleared before components are unbound.
Reported-by: Bjorn Andersson <andersson@kernel.org>
Fixes: 8f59ee9a57 ("drm/msm/dsi: Adjust probe order")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/562238/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69b321b2c3df4f7e51a9de587e41f324b0b717b0 ]
Use exiting function to free the allocated GEM object instead of
open-coding it. This has a bonus of internally calling
msm_gem_put_vaddr() to compensate for msm_gem_get_vaddr() in
msm_get_kernel_new().
Fixes: 1e29dff004 ("drm/msm: Add a common function to free kernel buffer objects")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/562239/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c269f42d0f382743ab230308b836ffe5ae9b2ae ]
Linux enables MSI-X before disabling INTx, but keeps MSI-X masked until
the table is filled. Then it disables INTx just before clearing MASKALL
bit. Currently this approach is rejected by xen-pciback.
According to the PCIe spec, device cannot use INTx when MSI/MSI-X is
enabled (in other words: enabling MSI/MSI-X implicitly disables INTx).
Change the logic to consider INTx disabled if MSI/MSI-X is enabled. This
applies to three places:
- checking currently enabled interrupts type,
- transition to MSI/MSI-X - where INTx would be implicitly disabled,
- clearing INTx disable bit - which can be allowed even if MSI/MSI-X is
enabled, as device should consider INTx disabled anyway in that case
Fixes: 5e29500eba ("xen-pciback: Allow setting PCI_MSIX_FLAGS_MASKALL too")
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20231016131348.1734721-1-marmarek@invisiblethingslab.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6471da5ee311d53ef46eebcb7725bc94266cc0cf ]
The "ret" variable is declared as ssize_t and it can hold negative error
codes but the "rk_obj->base.size" variable is type size_t. This means
that when we compare them, they are both type promoted to size_t and the
negative error code becomes a high unsigned value and is treated as
success. Add a cast to fix this.
Fixes: 38f993b7c5 ("drm/rockchip: Do not use DMA mapping API if attached to IOMMU domain")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/2bfa28b5-145d-4b9e-a18a-98819dd686ce@moroto.mountain
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20f3b8eafe0ba5d3c69d5011a9b07739e9645132 ]
When KPTI is in use, we cannot register a runstate region as XEN
requires that this is always a valid VA, which we cannot guarantee. Due
to this, xen_starting_cpu() must avoid registering each CPU's runstate
region, and xen_guest_init() must avoid setting up features that depend
upon it.
We tried to ensure that in commit:
f88af7229f (" xen/arm: do not setup the runstate info page if kpti is enabled")
... where we added checks for xen_kernel_unmapped_at_usr(), which wraps
arm64_kernel_unmapped_at_el0() on arm64 and is always false on 32-bit
arm.
Unfortunately, as xen_guest_init() is an early_initcall, this happens
before secondary CPUs are booted and arm64 has finalized the
ARM64_UNMAP_KERNEL_AT_EL0 cpucap which backs
arm64_kernel_unmapped_at_el0(), and so this can subsequently be set as
secondary CPUs are onlined. On a big.LITTLE system where the boot CPU
does not require KPTI but some secondary CPUs do, this will result in
xen_guest_init() intializing features that depend on the runstate
region, and xen_starting_cpu() registering the runstate region on some
CPUs before KPTI is subsequent enabled, resulting the the problems the
aforementioned commit tried to avoid.
Handle this more robsutly by deferring the initialization of the
runstate region until secondary CPUs have been initialized and the
ARM64_UNMAP_KERNEL_AT_EL0 cpucap has been finalized. The per-cpu work is
moved into a new hotplug starting function which is registered later
when we're certain that KPTI will not be used.
Fixes: f88af7229f ("xen/arm: do not setup the runstate info page if kpti is enabled")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Bertrand Marquis <bertrand.marquis@arm.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53412dc2905401207f264dc30890f6b9e41524a6 ]
The difference between drm_atomic_helper_commit_tail() and
drm_atomic_helper_commit_tail_rpm() is
drm_atomic_helper_commit_tail() will commit plane first and
then enable crtc, drm_atomic_helper_commit_tail_rpm() will
enable crtc first and then commit plane.
Before mediatek-drm enables crtc, the power and clk required
by OVL have not been turned on, so the commit plane cannot be
committed before crtc is enabled. That means OVL layer should
not be enabled before crtc is enabled.
Therefore, the atomic_commit_tail of mediatek-drm is hooked with
drm_atomic_helper_commit_tail_rpm().
Another reason is that the plane_state of drm_atomic_state is not
synchronized with the plane_state stored in mtk_crtc during crtc enablng,
so just set all planes to disabled.
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230809125722.24112-3-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f74c746e476b9dad51448b9a9421aae72b60e25f ]
nbufs tracks the number of buffers and not the last bgid. In 16-bit, we
have 2^16 valid buffers, but the check mistakenly rejects the last
bid. Let's fix it to make the interface consistent with the
documentation.
Fixes: ddf0322db7 ("io_uring: add IORING_OP_PROVIDE_BUFFERS")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20231005000531.30800-3-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab69838e7c75b0edb699c1a8f42752b30333c46f ]
Commit 3851d25c75 ("io_uring: check for rollover of buffer ID when
providing buffers") introduced a check to prevent wrapping the BID
counter when sqe->off is provided, but it's off-by-one too
restrictive, rejecting the last possible BID (65534).
i.e., the following fails with -EINVAL.
io_uring_prep_provide_buffers(sqe, addr, size, 0xFFFF, 0, 0);
Fixes: 3851d25c75 ("io_uring: check for rollover of buffer ID when providing buffers")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20231005000531.30800-2-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc0b79ce2050aa523c38c96b6d26340a96bfbdca ]
If no plane was newly enabled or changed scaling, there can be no new
scaling mismatch with the cursor plane.
By not pulling non-cursor plane states into all atomic commits while
the cursor plane is enabled, this avoids synchronizing all cursor plane
changes to vertical blank, which caused the following IGT tests to fail:
kms_cursor_legacy@cursor-vs-flip.*
kms_cursor_legacy@flip-vs-cursor.*
Fixes: 003048ddf44b ("drm/amd/display: Check all enabled planes in dm_check_crtc_cursor")
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bfaa160caed8192f8262c4638f552cad94bcf5a ]
This patch fixes:
1: ref number of prange's svm_bo got decreased by an async call from hmm. When
wait svm_bo of prange got released we shoul also wait prang->svm_bo become NULL,
otherwise prange->svm_bo may be set to null after allocate new vram buffer.
2: During waiting svm_bo of prange got released in a while loop should reschedule
current task to give other tasks oppotunity to run, specially the the workque
task that handles svm_bo ref release, otherwise we may enter to softlock.
Signed-off-by: Xiaogang.Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 699cf62a7d4550759f4a50e614b1952f93de4783 ]
The Toshiba documentation talks about HSByteClk when referring to the
DSI HS byte clock, whereas the driver uses 'dsibclk' name. Also, in a
few places the driver calculates the byte clock from the DSI clock, even
if the byte clock is already available in a variable.
To align the driver with the documentation, change the 'dsibclk'
variable to 'hsbyteclk'. This also make it easier to visually separate
'dsibclk' and 'dsiclk' variables.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-9-31725f008a50@ideasonboard.com
Stable-dep-of: f1dabbe64506 ("drm/bridge: tc358768: Fix tc358768_ns_to_cnt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5fb21678136a9d009d5c43821881eb4c34fae97 ]
The TC358768 documentation uses HFP, HBP, etc. values to deal with the
video mode, while the driver currently uses the DRM display mode
(htotal, hsync_start, etc).
Change the driver to convert the DRM display mode to struct videomode,
which then allows us to use the same units the documentation uses. This
makes it much easier to work on the code when using the TC358768
documentation as a reference.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-tc358768-v4-6-31725f008a50@ideasonboard.com
Stable-dep-of: f1dabbe64506 ("drm/bridge: tc358768: Fix tc358768_ns_to_cnt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6985c5efc4057bc79137807295d84ada3123d051 ]
lt8912b only calls drm_bridge_hpd_enable() if it creates a connector and
the next bridge has DRM_BRIDGE_OP_HPD set. However, when calling
drm_bridge_hpd_disable() it misses checking if a connector was created,
calling drm_bridge_hpd_disable() even if HPD was never enabled. I don't
see any issues caused by this wrong call, though.
Add the check to avoid wrongly calling drm_bridge_hpd_disable().
Fixes: 3b0a01a6a5 ("drm/bridge: lt8912b: Add hot plug detection")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804-lt8912b-v1-3-c542692c6a2f@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
