HW flushes after QP in error state is not reliable. This can lead to
application hang waiting on a completion for outstanding WRs. Implement a
SW mechanism to generate completions for any outstanding WR's after the QP
is modified to error.
This is accomplished by starting a delayed worker after the QP is modified
to error and the HW flush is performed. The worker will generate
completions that will be returned to the application when it polls the
CQ. This mechanism only applies to Kernel applications.
Link: https://lore.kernel.org/r/20220425181624.1617-1-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In the tasklets (completer, responder, and requester) check the return
value from rxe_get() to detect failures to get a reference. This only
occurs if the qp has had its reference count drop to zero which indicates
that it no longer should be used.
The ref is never 0 today because the tasklets are flushed before the ref
is dropped. The next patch changes this so that the ref is dropped then
the tasklets are flushed.
Link: https://lore.kernel.org/r/20220421014042.26985-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently the #define IB_SRQ_INIT_MASK is used to distinguish the
rxe_create_srq verb from the rxe_modify_srq verb so that some code can be
shared between these two subroutines.
This commit splits rxe_srq_chk_attr into two subroutines: rxe_srq_chk_init
and rxe_srq_chk_attr which handle the create_srq and modify_srq verbs
separately.
Link: https://lore.kernel.org/r/20220421014042.26985-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The bt number of cqc_timer of HIP09 increases compared with that of HIP08.
Therefore, cqc_timer_bt_num and num_cqc_timer do not match. As a result,
the driver may fail to allocate cqc_timer. So the driver needs to uniquely
uses cqc_timer_bt_num to represent the bt number of cqc_timer.
Fixes: 0e40dc2f70 ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/20220429093545.58070-1-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
CMDQ may fail during HNS ROCEE initialization. The following is the log
when the execution fails:
hns3 0000:bd:00.2: In reset process RoCE client reinit.
hns3 0000:bd:00.2: CMDQ move tail from 840 to 839
hns3 0000:bd:00.2 hns_2: failed to set gid, ret = -11!
hns3 0000:bd:00.2: CMDQ move tail from 840 to 839
<...>
hns3 0000:bd:00.2: CMDQ move tail from 840 to 839
hns3 0000:bd:00.2: CMDQ move tail from 840 to 0
hns3 0000:bd:00.2: [cmd]token 14e mailbox 20 timeout.
hns3 0000:bd:00.2 hns_2: set HEM step 0 failed!
hns3 0000:bd:00.2 hns_2: set HEM address to HW failed!
hns3 0000:bd:00.2 hns_2: failed to alloc mtpt, ret = -16.
infiniband hns_2: Couldn't create ib_mad PD
infiniband hns_2: Couldn't open port 1
hns3 0000:bd:00.2: Reset done, RoCE client reinit finished.
However, even if ib_mad client registration failed, ib_register_device()
still returns success to the driver.
In the device initialization process, CMDQ execution fails because HW/FW
is abnormal. Therefore, if CMDQ fails, the initialization function should
set CMDQ to a fatal error state and return a failure to the caller.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/20220429093104.26687-1-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In finish_packet() in rxe_req.c a variable was incorrectly called paylen
instead of payload. Elsewhere in the rxe source payload is always used for
the RoCE payload length and paylen is always used for the UDP payload
length. This will cause unnecessary confusion.
Replace paylen by payload in finish_packet().
Link: https://lore.kernel.org/r/20220420172316.5465-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Introduce mlx5_umr_post_send_wait() that uses a UMR adjusted flow for
posting WQEs. The next patches will gradually move UMR operations to use
this flow. Once done, will get rid of mlx5_ib_post_send_wait().
mlx5_umr_post_send_wait gets already written WQE segments and will only
memcpy it to the SQ. This way, we avoid packing all the data in a WR just
to unpack it into the WQE.
Link: https://lore.kernel.org/r/f027dd592fde62402b2d49efded8d1d22229d22b.1649747695.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The commit mentioned in Fixes line removed the function that was
called to check validity of esp_aes_gcm attribute. Sadly, that
is_valid_esp_aes_gcm() returned success even for specs without
esp_aes_gcm at all.
So the right fix will be to remove whole if () and such fix
the following error observed in smatch too.
drivers/infiniband/hw/mlx5/fs.c:1126 _create_flow_rule()
warn: duplicate check 'is_egress' (previous on line 1098)
Fixes: de8bdb4769 ("RDMA/mlx5: Drop crypto flow steering API")
Link: https://lore.kernel.org/r/11b31c1f85bc8c8add385529aa3f307c3b383a11.1649842371.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Current rxe_requester() doesn't generate a completion when processing an
unsupported/invalid opcode. If rxe driver doesn't support a new opcode
(e.g. RDMA Atomic Write) and RDMA library supports it, an application
using the new opcode can reproduce this issue. Fix the issue by calling
"goto err;".
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220410113513.27537-1-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Leon Romanovsky says:
====================
Mellanox shared branch that includes:
* Removal of FPGA TLS code https://lore.kernel.org/all/cover.1649073691.git.leonro@nvidia.com
Mellanox INNOVA TLS cards are EOL in May, 2018 [1]. As such, the code
is unmaintained, untested and not in-use by any upstream/distro oriented
customers. In order to reduce code complexity, drop the kernel code,
clean build config options and delete useless kTLS vs. TLS separation.
[1] https://network.nvidia.com/related-docs/eol/LCR-000286.pdf
* Removal of FPGA IPsec code https://lore.kernel.org/all/cover.1649232994.git.leonro@nvidia.com
Together with FPGA TLS, the IPsec went to EOL state in the November of
2019 [1]. Exactly like FPGA TLS, no active customers exist for this
upstream code and all the complexity around that area can be deleted.
[2] https://network.nvidia.com/related-docs/eol/LCR-000535.pdf
* Fix to undefined behavior from Borislav https://lore.kernel.org/all/20220405151517.29753-11-bp@alien8.de
====================
* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Remove not-implemented IPsec capabilities
net/mlx5: Remove ipsec_ops function table
net/mlx5: Reduce kconfig complexity while building crypto support
net/mlx5: Move IPsec file to relevant directory
net/mlx5: Remove not-needed IPsec config
net/mlx5: Align flow steering allocation namespace to common style
net/mlx5: Unify device IPsec capabilities check
net/mlx5: Remove useless IPsec device checks
net/mlx5: Remove ipsec vs. ipsec offload file separation
RDMA/core: Delete IPsec flow action logic from the core
RDMA/mlx5: Drop crypto flow steering API
RDMA/mlx5: Delete never supported IPsec flow action
net/mlx5: Remove FPGA ipsec specific statistics
net/mlx5: Remove XFRM no_trailer flag
net/mlx5: Remove not-used IDA field from IPsec struct
net/mlx5: Delete metadata handling logic
net/mlx5_fpga: Drop INNOVA IPsec support
IB/mlx5: Fix undefined behavior due to shift overflowing the constant
net/mlx5: Cleanup kTLS function names and their exposure
net/mlx5: Remove tls vs. ktls separation as it is the same
net/mlx5: Remove indirection in TLS build
net/mlx5: Reliably return TLS device capabilities
net/mlx5_fpga: Drop INNOVA TLS support
Link: https://lore.kernel.org/r/20220409055303.1223644-1-leon@kernel.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Both IPsec and kTLS need two functions declared in the lib/crypto.c
file. These functions are advertised through general mlx5.h file and
don't have any protection from attempts to call them without proper
config option.
Instead of creating stubs just for two functions, simply build that *.c
file as part of regular mlx5_eth build and rely on compiler to throw
them away if no callers exist in produced code.
Link: https://lore.kernel.org/r/37f02171da06886c1b403d44dd18b2a56b19219d.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The mlx5 flow steering crypto API was intended to be used in FPGA
devices, which is not supported for years already. The removal of
mlx5 crypto FPGA code together with inability to configure encryption
keys makes the low steering API completely unusable.
So delete the code, so any ESP flow steering requests will fail with
not supported error, as it is happening now anyway as no device support
this type of API.
Link: https://lore.kernel.org/r/634a5face7734381463d809bfb89850f6998deac.1649232994.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
