[ Upstream commit 334c7b13d3 ]
Commit 2cfe9bbec5 added support for the
RGB and green PWM controlled LEDs on the HiFive Unmatched board
managed by the leds-pwm-multicolor and leds-pwm drivers respectively.
All three colours of the RGB LED and the green LED run from different
lines of the same PWM, but with the same period so this works fine when
the LED drivers are loaded one after the other.
Unfortunately it does expose a race in the PWM driver when both LED
drivers are loaded at roughly the same time. Here is an example:
| Thread A | Thread B |
| led_pwm_mc_probe | led_pwm_probe |
| devm_fwnode_pwm_get | |
| pwm_sifive_request | |
| ddata->user_count++ | |
| | devm_fwnode_pwm_get |
| | pwm_sifive_request |
| | ddata->user_count++ |
| ... | ... |
| pwm_state_apply | pwm_state_apply |
| pwm_sifive_apply | pwm_sifive_apply |
Now both calls to pwm_sifive_apply will see that ddata->approx_period,
initially 0, is different from the requested period and the clock needs
to be updated. But since ddata->user_count >= 2 both calls will fail
with -EBUSY, which will then cause both LED drivers to fail to probe.
Fix it by letting the first call to pwm_sifive_apply update the clock
even when ddata->user_count != 1.
Fixes: 9e37a53eb0 ("pwm: sifive: Add a driver for SiFive SoC PWM")
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f02f491b7 ]
The lock is only to serialize access and update to user_count and
approx_period between different PWMs served by the same pwm_chip.
So the lock needs only to be taken during the check if the (chip global)
period can and/or needs to be changed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of: 334c7b13d3 ("pwm: sifive: Always let the first pwm_apply_state succeed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddf75a86ab ]
hd44780_probe() allocates a memory chunk for hd with kzalloc() and
makes "lcd->drvdata->hd44780" point to it. When we call hd44780_remove(),
we should release all relevant memory and resource. But "lcd->drvdata
->hd44780" is not released, which will lead to a memory leak.
We should release the "lcd->drvdata->hd44780" in hd44780_remove() to fix
the memory leak bug.
Fixes: 718e05ed92 ("auxdisplay: Introduce hd44780_common.[ch]")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8c710f7525 upstream.
The tcindex classifier has served us well for about a quarter of a century
but has not been getting much TLC due to lack of known users. Most recently
it has become easy prey to syzkaller. For this reason, we are retiring it.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bf7358816 upstream.
Port silent mode detection to the future (post make-4.4) versions of gnu make.
Makefile contains the following piece of make code to detect if option -s is
specified on the command line.
ifneq ($(findstring s,$(filter-out --%,$(MAKEFLAGS))),)
This code is executed by make at parse time and assumes that MAKEFLAGS
does not contain command line variable definitions.
Currently if the user defines a=s on the command line, then at build only
time MAKEFLAGS contains " -- a=s".
However, starting with commit dc2d963989b96161472b2cd38cef5d1f4851ea34
MAKEFLAGS contains command line definitions at both parse time and
build time.
This '-s' detection code then confuses a command line variable
definition which contains letter 's' with option -s.
$ # old make
$ make net/wireless/ocb.o a=s
CALL scripts/checksyscalls.sh
DESCEND objtool
$ # this a new make which defines makeflags at parse time
$ ~/src/gmake/make/l64/make net/wireless/ocb.o a=s
$
We can see here that the letter 's' from 'a=s' was confused with -s.
This patch checks for presence of -s using a method recommended by the
make manual here
https://www.gnu.org/software/make/manual/make.html#Testing-Flags.
Link: https://lists.gnu.org/archive/html/bug-make/2022-11/msg00190.html
Reported-by: Jan Palus <jpalus+gnu@fastmail.com>
Signed-off-by: Dmitry Goncharov <dgoncharov@users.sf.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7dc753fe3 upstream.
A previous cleanup patch accidentally broke some conditional
expressions by replacing the safe "do {} while (0)" constructs
with empty macros. gcc points this out when extra warnings
are enabled:
drivers/net/wireless/ath/ath9k/hif_usb.c: In function 'ath9k_skb_queue_complete':
drivers/net/wireless/ath/ath9k/hif_usb.c:251:57: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
251 | TX_STAT_INC(hif_dev, skb_failed);
Make both sets of macros proper expressions again.
Fixes: d7fc76039b ("ath9k: htc: clean up statistics macros")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221215165553.1950307-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b06506055 upstream.
Currently when the allocation of map->name fails the error exit path
does not kfree the previously allocated object map. Fix this by
setting ret to -ENOMEM and taking the free_map exit error path to
ensure map is kfree'd.
Addresses-Coverity: ("Resource leak")
Fixes: 70fa906d6f ("media: uvcvideo: Use control names from framework")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aaa3c08ee0 upstream.
Even after commit 908d4bb7c5 ("qede: fix interrupt coalescing
configuration"), some entries of the coal_entry array may theoretically
be used uninitialized:
1. qede_alloc_fp_array() allocates QEDE_MAX_RSS_CNT entries for
coal_entry. The initial allocation uses kcalloc, so everything is
initialized.
2. The user sets a small number of queues (ethtool -L).
coal_entry is reallocated for the actual small number of queues.
3. The user sets a bigger number of queues.
coal_entry is reallocated bigger. The added entries are not
necessarily initialized.
In practice, the reallocations will actually keep using the originally
allocated region of memory, but we should not rely on it.
The reallocation is unnecessary. coal_entry can always have
QEDE_MAX_RSS_CNT entries.
Fixes: 908d4bb7c5 ("qede: fix interrupt coalescing configuration")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Nacked-by: Manish Chopra <manishc@marvell.com>
Acked-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2750af50a3 upstream.
As of Intel SDM (https://www.intel.com/sdm) version 076, there is a new
Intel PT feature called Event Trace which requires 2 new packets CFE and
EVD. Add them to the packet decoder and packet decoder test.
Committer notes:
I got the "Intel® 64 and IA-32 architectures software developer’s manual
combined volumes: 1, 2A, 2B, 2C, 2D, 3A, 3B, 3C, 3D, and 4" PDF at:
https://cdrdv2.intel.com/v1/dl/getContent/671200
And these new packets are described in page 3951:
<quote>
32.2.4
Event Trace is a capability that exposes details about the asynchronous
events, when they are generated, and when their corresponding software
event handler completes execution. These include:
o Interrupts, including NMI and SMI, including the interrupt vector when
defined.
o Faults, exceptions including the fault vector.
— Page faults additionally include the page fault address, when in context.
o Event handler returns, including IRET and RSM.
o VM exits and VM entries.¹
— VM exits include the values written to the “exit reason” and “exit qualification” VMCS fields.
INIT and SIPI events.
o TSX aborts, including the abort status returned for the RTM instructions.
o Shutdown.
Additionally, it provides indication of the status of the Interrupt Flag
(IF), to indicate when interrupts are masked.
</quote>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05eacc198c upstream.
Apple iMac11,2 (mid 2010) also with Radeon HD-4670 that has the same
issue as iMac10,1 (late 2009) where the internal eDP panel stays dark on
driver load. This patch treats iMac11,2 the same as iMac10,1,
so the eDP panel stays active.
Additional steps:
Kernel boot parameter radeon.nomodeset=0 required to keep the eDP
panel active.
This patch is an extension of
commit 564d8a2cf3 ("drm/radeon: Fix eDP for single-display iMac10,1 (v2)")
Link: https://lore.kernel.org/all/lsq.1507553064.833262317@decadent.org.uk/
Signed-off-by: Mark Hawrylak <mark.hawrylak@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90fdd158a6 upstream.
When a vfio container is preserved across exec or fork-exec, the new
task's mm has a locked_vm count of 0. After a dma vaddr is updated using
VFIO_DMA_MAP_FLAG_VADDR, locked_vm remains 0, and the pinned memory does
not count against the task's RLIMIT_MEMLOCK.
To restore the correct locked_vm count, when VFIO_DMA_MAP_FLAG_VADDR is
used and the dma's mm has changed, add the dma's locked_vm count to
the new mm->locked_vm, subject to the rlimit, and subtract it from the
old mm->locked_vm.
Fixes: c3cbab24db ("vfio/type1: implement interfaces to update vaddr")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1675184289-267876-5-git-send-email-steven.sistare@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 046eca5018 upstream.
When a vfio container is preserved across exec, the task does not change,
but it gets a new mm with locked_vm=0, and loses the count from existing
dma mappings. If the user later unmaps a dma mapping, locked_vm underflows
to a large unsigned value, and a subsequent dma map request fails with
ENOMEM in __account_locked_vm.
To avoid underflow, grab and save the mm at the time a dma is mapped.
Use that mm when adjusting locked_vm, rather than re-acquiring the saved
task's mm, which may have changed. If the saved mm is dead, do nothing.
locked_vm is incremented for existing mappings in a subsequent patch.
Fixes: 73fa0d10d0 ("vfio: Type1 IOMMU implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1675184289-267876-3-git-send-email-steven.sistare@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63ba51db24 upstream.
PCI passthrough to VMs does not work with AMD FCH AHCI adapters: the guest
OS fails to correctly probe devices attached to the controller due to FIS
communication failures:
ata4: softreset failed (1st FIS failed)
...
ata4.00: qc timeout after 5000 msecs (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Forcing the "bus" reset method before unbinding & binding the adapter to
the vfio-pci driver solves this issue, e.g.:
echo "bus" > /sys/bus/pci/devices/<ID>/reset_method
gives a working guest OS, indicating that the default FLR reset method
doesn't work correctly.
Apply quirk_no_flr() to AMD FCH AHCI devices to work around this issue.
Link: https://lore.kernel.org/r/20230128013951.523247-1-damien.lemoal@opensource.wdc.com
Reported-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74ff8864cc upstream.
On surprise removal, pciehp_unconfigure_device() and acpiphp's
trim_stale_devices() call pci_dev_set_disconnected() to mark removed
devices as permanently offline. Thereby, the PCI core and drivers know
to skip device accesses.
However pci_dev_set_disconnected() takes the device_lock and thus waits for
a concurrent driver bind or unbind to complete. As a result, the driver's
->probe and ->remove hooks have no chance to learn that the device is gone.
That doesn't make any sense, so drop the device_lock and instead use atomic
xchg() and cmpxchg() operations to update the device state.
As a byproduct, an AB-BA deadlock reported by Anatoli is fixed which occurs
on surprise removal with AER concurrently performing a bus reset.
AER bus reset:
INFO: task irq/26-aerdrv:95 blocked for more than 120 seconds.
Tainted: G W 6.2.0-rc3-custom-norework-jan11+
schedule
rwsem_down_write_slowpath
down_write_nested
pciehp_reset_slot # acquires reset_lock
pci_reset_hotplug_slot
pci_slot_reset # acquires device_lock
pci_bus_error_reset
aer_root_reset
pcie_do_recovery
aer_process_err_devices
aer_isr
pciehp surprise removal:
INFO: task irq/26-pciehp:96 blocked for more than 120 seconds.
Tainted: G W 6.2.0-rc3-custom-norework-jan11+
schedule_preempt_disabled
__mutex_lock
mutex_lock_nested
pci_dev_set_disconnected # acquires device_lock
pci_walk_bus
pciehp_unconfigure_device
pciehp_disable_slot
pciehp_handle_presence_or_link_change
pciehp_ist # acquires reset_lock
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215590
Fixes: a6bd101b8f ("PCI: Unify device inaccessible")
Link: https://lore.kernel.org/r/3dc88ea82bdc0e37d9000e413d5ebce481cbd629.1674205689.git.lukas@wunner.de
Reported-by: Anatoli Antonovitch <anatoli.antonovitch@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.20+
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ef0217227 upstream.
If a PCI bridge is suspended to D3cold upon entering system sleep,
resuming it entails a Fundamental Reset per PCIe r6.0 sec 5.8.
The delay prescribed after a Fundamental Reset in PCIe r6.0 sec 6.6.1
is sought to be observed by:
pci_pm_resume_noirq()
pci_pm_bridge_power_up_actions()
pci_bridge_wait_for_secondary_bus()
However, pci_bridge_wait_for_secondary_bus() bails out if the bridge_d3
flag is not set. That flag indicates whether a bridge is allowed to
suspend to D3cold at *runtime*.
Hence *no* delay is observed on resume from system sleep if runtime
D3cold is forbidden. That doesn't make any sense, so drop the bridge_d3
check from pci_bridge_wait_for_secondary_bus().
The purpose of the bridge_d3 check was probably to avoid delays if a
bridge remained in D0 during suspend. However the sole caller of
pci_bridge_wait_for_secondary_bus(), pci_pm_bridge_power_up_actions(),
is only invoked if the previous power state was D3cold. Hence the
additional bridge_d3 check seems superfluous.
Fixes: ad9001f2f4 ("PCI/PM: Add missing link delays required by the PCIe spec")
Link: https://lore.kernel.org/r/eb37fa345285ec8bacabbf06b020b803f77bdd3d.1673769517.git.lukas@wunner.de
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6724a76cff upstream.
Use a temporary register to reduce the size of detour code from 16 bytes to
8 bytes. The previous implementation is from 'commit afc76b8b80 ("riscv:
Using PATCHABLE_FUNCTION_ENTRY instead of MCOUNT")'.
Before the patch:
<func_prolog>:
0: REG_S ra, -SZREG(sp)
4: auipc ra, ?
8: jalr ?(ra)
12: REG_L ra, -SZREG(sp)
(func_boddy)
After the patch:
<func_prolog>:
0: auipc t0, ?
4: jalr t0, ?(t0)
(func_boddy)
This patch not just reduces the size of detour code, but also fixes an
important issue:
An Ftrace callback registered with FTRACE_OPS_FL_IPMODIFY flag can
actually change the instruction pointer, e.g. to "replace" the given
kernel function with a new one, which is needed for livepatching, etc.
In this case, the trampoline (ftrace_regs_caller) would not return to
<func_prolog+12> but would rather jump to the new function. So, "REG_L
ra, -SZREG(sp)" would not run and the original return address would not
be restored. The kernel is likely to hang or crash as a result.
This can be easily demonstrated if one tries to "replace", say,
cmdline_proc_show() with a new function with the same signature using
instruction_pointer_set(&fregs->regs, new_func_addr) in the Ftrace
callback.
Link: https://lore.kernel.org/linux-riscv/20221122075440.1165172-1-suagrfillet@gmail.com/
Link: https://lore.kernel.org/linux-riscv/d7d5730b-ebef-68e5-5046-e763e1ee6164@yadro.com/
Co-developed-by: Song Shuai <suagrfillet@gmail.com>
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: Evgenii Shatokhin <e.shatokhin@yadro.com>
Reviewed-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Link: https://lore.kernel.org/r/20230112090603.1295340-4-guoren@kernel.org
Cc: stable@vger.kernel.org
Fixes: 10626c32e3 ("riscv/ftrace: Add basic support")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 416721ff05 upstream.
Commit 21855cac82 ("riscv/mm: Prevent kernel module to access user
memory without uaccess routines") added early exits/deaths for page
faults stemming from accesses to user-space without using proper
uaccess routines (where sstatus.SUM is set).
Unfortunatly, this is too strict for some BPF programs, which relies
on BPF exhandler fixups. These BPF programs loads "BTF pointers". A
BTF pointers could either be a valid kernel pointer or NULL, but not a
userspace address.
Resolve the problem by calling the fixup handler in the early exit
path.
Fixes: 21855cac82 ("riscv/mm: Prevent kernel module to access user memory without uaccess routines")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230214162515.184827-1-bjorn@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ddfc3cd80 upstream.
Runtime code patching must be done at a naturally aligned address, or we
may execute on a partial instruction.
We have encountered problems traced back to static jump functions during
the test. We switched the tracer randomly for every 1~5 seconds on a
dual-core QEMU setup and found the kernel sucking at a static branch
where it jumps to itself.
The reason is that the static branch was 2-byte but not 4-byte aligned.
Then, the kernel would patch the instruction, either J or NOP, with two
half-word stores if the machine does not have efficient unaligned
accesses. Thus, moments exist where half of the NOP mixes with the other
half of the J when transitioning the branch. In our particular case, on
a little-endian machine, the upper half of the NOP was mixed with the
lower part of the J when enabling the branch, resulting in a jump that
jumped to itself. Conversely, it would result in a HINT instruction when
disabling the branch, but it might not be observable.
ARM64 does not have this problem since all instructions must be 4-byte
aligned.
Fixes: ebc00dde8a ("riscv: Add jump-label implementation")
Link: https://lore.kernel.org/linux-riscv/20220913094252.3555240-6-andy.chiu@sifive.com/
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230206090440.1255001-1-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb9be8310c upstream.
The patchwork automation reported a sparse complaint that
spin_shadow_stack was not declared and should be static:
../arch/riscv/kernel/traps.c:335:15: warning: symbol 'spin_shadow_stack' was not declared. Should it be static?
However, this is used in entry.S and therefore shouldn't be static.
The same applies to the shadow_stack that this pseudo spinlock is
trying to protect, so do like its charge and add a declaration to
thread_info.h
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: 7e1864332f ("riscv: fix race when vmap stack overflow")
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230210185945.915806-1-conor@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3fbc74feb6 upstream.
If after an adapter reset the appearance of link is not recovered, the
devices are not rediscovered. This is result of a race condition between
adapter reset (abort_isp) and the topology scan. During adapter reset, the
ABORT_ISP_ACTIVE flag is set. Topology scan usually occurred after adapter
reset. In this case, the topology scan came earlier than usual where it
ran into problem due to ABORT_ISP_ACTIVE flag was still set.
kernel: qla2xxx [0000:13:00.0]-1005:1: Cmd 0x6a aborted with timeout since ISP Abort is pending
kernel: qla2xxx [0000:13:00.0]-28a0:1: MBX_GET_PORT_NAME failed, No FL Port.
kernel: qla2xxx [0000:13:00.0]-286b:1: qla2x00_configure_loop: exiting normally. local port wwpn 51402ec0123d9a80 id 012300)
kernel: qla2xxx [0000:13:00.0]-8017:1: ADAPTER RESET SUCCEEDED nexus=1:0:15.
Allow adapter reset to complete before any scan can start.
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c75e6aef50 upstream.
The following message and call trace was seen with debug kernels:
DMA-API: qla2xxx 0000:41:00.0: device driver failed to check map
error [device address=0x00000002a3ff38d8] [size=1024 bytes] [mapped as
single]
WARNING: CPU: 0 PID: 2930 at kernel/dma/debug.c:1017
check_unmap+0xf42/0x1990
Call Trace:
debug_dma_unmap_page+0xc9/0x100
qla_nvme_ls_unmap+0x141/0x210 [qla2xxx]
Remove DMA mapping from the driver altogether, as it is already done by FC
layer. This prevents the warning.
Fixes: c85ab7d9e2 ("scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests")
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1ae65c082 upstream.
User experienced symptoms of adapter failure in NPIV environment. NPIV
hosts were allowed to trigger chip reset back to back due to NPIV link
state being slow to come online.
Fix link failure in NPIV environment by removing NPIV host from directly
being able to perform chip reset.
kernel: qla2xxx [0000:04:00.1]-6009:261: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:262: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:281: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:285: Loop down - aborting ISP
Fixes: 0d6e61bc6a ("[SCSI] qla2xxx: Correct various NPIV issues.")
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8843e06f67 upstream.
It seems a data race between ring_buffer writing and integrity check.
That is, RB_FLAG of head_page is been updating, while at same time
RB_FLAG was cleared when doing integrity check rb_check_pages():
rb_check_pages() rb_handle_head_page():
-------- --------
rb_head_page_deactivate()
rb_head_page_set_normal()
rb_head_page_activate()
We do intergrity test of the list to check if the list is corrupted and
it is still worth doing it. So, let's refactor rb_check_pages() such that
we no longer clear and set flag during the list sanity checking.
[1] and [2] are the test to reproduce and the crash report respectively.
1:
``` read_trace.sh
while true;
do
# the "trace" file is closed after read
head -1 /sys/kernel/tracing/trace > /dev/null
done
```
``` repro.sh
sysctl -w kernel.panic_on_warn=1
# function tracer will writing enough data into ring_buffer
echo function > /sys/kernel/tracing/current_tracer
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
```
2:
------------[ cut here ]------------
WARNING: CPU: 9 PID: 62 at kernel/trace/ring_buffer.c:2653
rb_move_tail+0x450/0x470
Modules linked in:
CPU: 9 PID: 62 Comm: ksoftirqd/9 Tainted: G W 6.2.0-rc6+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:rb_move_tail+0x450/0x470
Code: ff ff 4c 89 c8 f0 4d 0f b1 02 48 89 c2 48 83 e2 fc 49 39 d0 75 24
83 e0 03 83 f8 02 0f 84 e1 fb ff ff 48 8b 57 10 f0 ff 42 08 <0f> 0b 83
f8 02 0f 84 ce fb ff ff e9 db
RSP: 0018:ffffb5564089bd00 EFLAGS: 00000203
RAX: 0000000000000000 RBX: ffff9db385a2bf81 RCX: ffffb5564089bd18
RDX: ffff9db281110100 RSI: 0000000000000fe4 RDI: ffff9db380145400
RBP: ffff9db385a2bf80 R08: ffff9db385a2bfc0 R09: ffff9db385a2bfc2
R10: ffff9db385a6c000 R11: ffff9db385a2bf80 R12: 0000000000000000
R13: 00000000000003e8 R14: ffff9db281110100 R15: ffffffffbb006108
FS: 0000000000000000(0000) GS:ffff9db3bdcc0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005602323024c8 CR3: 0000000022e0c000 CR4: 00000000000006e0
Call Trace:
<TASK>
ring_buffer_lock_reserve+0x136/0x360
? __do_softirq+0x287/0x2df
? __pfx_rcu_softirq_qs+0x10/0x10
trace_function+0x21/0x110
? __pfx_rcu_softirq_qs+0x10/0x10
? __do_softirq+0x287/0x2df
function_trace_call+0xf6/0x120
0xffffffffc038f097
? rcu_softirq_qs+0x5/0x140
rcu_softirq_qs+0x5/0x140
__do_softirq+0x287/0x2df
run_ksoftirqd+0x2a/0x30
smpboot_thread_fn+0x188/0x220
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0xe7/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
---[ end trace 0000000000000000 ]---
[ crash report and test reproducer credit goes to Zheng Yejian]
Link: https://lore.kernel.org/linux-trace-kernel/1676376403-16462-1-git-send-email-quic_mojha@quicinc.com
Cc: <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 1039221cc2 ("ring-buffer: Do not disable recording when there is an iterator")
Reported-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e7d2a8f0b upstream.
There is a disconnect between the run_command function and the
wait_for_input. The wait_for_input has a default timeout of 2 minutes. But
if that happens, the run_command loop will exit out to the waitpid() of
the executing command. This fails in that it no longer monitors the
command, and also, the ssh to the test box can hang when its finished, as
it's waiting for the pipe it's writing to to flush, but the loop that
reads that pipe has already exited, leaving the command stuck, and the
test hangs.
Instead, make the default "wait_for_input" of the run_command infinite,
and allow the user to override it if they want with a default timeout
option "RUN_TIMEOUT".
But this fixes the hang that happens when the pipe is full and the ssh
session never exits.
Cc: stable@vger.kernel.org
Fixes: 6e98d1b441 ("ktest: Add timeout to ssh command")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8bf9b98d4 upstream.
In the "reboot" command, it does a check of the machine to see if it is
still alive with a simple "ssh echo" command. If it fails, it will assume
that a normal "ssh reboot" is not possible and force a power cycle.
In this case, the "start_monitor" is executed, but the "end_monitor" is
not, and this causes the screen will not be given back to the console. That
is, after the test, a "reset" command needs to be performed, as "echo" is
turned off.
Cc: stable@vger.kernel.org
Fixes: 6474ace999 ("ktest.pl: Powercycle the box on reboot if no connection can be made")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83d29d439c upstream.
When monitoring the console output, the stdout is being redirected to do
so. If Ctrl^C is hit during this mode, the stdout is not back to the
console, the user does not see anything they type (no echo).
Add "end_monitor" to the SIGINT interrupt handler to give back the console
on Ctrl^C.
Cc: stable@vger.kernel.org
Fixes: 9f2cdcbbb9 ("ktest: Give console process a dedicated tty")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81e506bec9 upstream.
Kernel build regression with LLVM was reported here:
https://lore.kernel.org/all/Y1GCYXGtEVZbcv%2F5@dev-arch.thelio-3990X/ with
commit f35b5d7d67 ("mm: align larger anonymous mappings on THP
boundaries"). And the commit f35b5d7d67 was reverted.
It turned out the regression is related with madvise(MADV_DONTNEED)
was used by ld.lld. But with none PMD_SIZE aligned parameter len.
trace-bpfcc captured:
531607 531732 ld.lld do_madvise.part.0 start: 0x7feca9000000, len: 0x7fb000, behavior: 0x4
531607 531793 ld.lld do_madvise.part.0 start: 0x7fec86a00000, len: 0x7fb000, behavior: 0x4
If the underneath physical page is THP, the madvise(MADV_DONTNEED) can
trigger split_queue_lock contention raised significantly. perf showed
following data:
14.85% 0.00% ld.lld [kernel.kallsyms] [k]
entry_SYSCALL_64_after_hwframe
11.52%
entry_SYSCALL_64_after_hwframe
do_syscall_64
__x64_sys_madvise
do_madvise.part.0
zap_page_range
unmap_single_vma
unmap_page_range
page_remove_rmap
deferred_split_huge_page
__lock_text_start
native_queued_spin_lock_slowpath
If THP can't be removed from rmap as whole THP, partial THP will be
removed from rmap by removing sub-pages from rmap. Even the THP head page
is added to deferred queue already, the split_queue_lock will be acquired
and check whether the THP head page is in the queue already. Thus, the
contention of split_queue_lock is raised.
Before acquire split_queue_lock, check and bail out early if the THP
head page is in the queue already. The checking without holding
split_queue_lock could race with deferred_split_scan, but it doesn't
impact the correctness here.
Test result of building kernel with ld.lld:
commit 7b5a0b664e (parent commit of f35b5d7d67):
time -f "\t%E real,\t%U user,\t%S sys" make LD=ld.lld -skj96 allmodconfig all
6:07.99 real, 26367.77 user, 5063.35 sys
commit f35b5d7d67:
time -f "\t%E real,\t%U user,\t%S sys" make LD=ld.lld -skj96 allmodconfig all
7:22.15 real, 26235.03 user, 12504.55 sys
commit f35b5d7d67 with the fixing patch:
time -f "\t%E real,\t%U user,\t%S sys" make LD=ld.lld -skj96 allmodconfig all
6:08.49 real, 26520.15 user, 5047.91 sys
Link: https://lkml.kernel.org/r/20221223135207.2275317-1-fengwei.yin@intel.com
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da34a8484d upstream.
Charge moving mode in cgroup1 allows memory to follow tasks as they
migrate between cgroups. This is, and always has been, a questionable
thing to do - for several reasons.
First, it's expensive. Pages need to be identified, locked and isolated
from various MM operations, and reassigned, one by one.
Second, it's unreliable. Once pages are charged to a cgroup, there isn't
always a clear owner task anymore. Cache isn't moved at all, for example.
Mapped memory is moved - but if trylocking or isolating a page fails,
it's arbitrarily left behind. Frequent moving between domains may leave a
task's memory scattered all over the place.
Third, it isn't really needed. Launcher tasks can kick off workload tasks
directly in their target cgroup. Using dedicated per-workload groups
allows fine-grained policy adjustments - no need to move tasks and their
physical pages between control domains. The feature was never
forward-ported to cgroup2, and it hasn't been missed.
Despite it being a niche usecase, the maintenance overhead of supporting
it is enormous. Because pages are moved while they are live and subject
to various MM operations, the synchronization rules are complicated.
There are lock_page_memcg() in MM and FS code, which non-cgroup people
don't understand. In some cases we've been able to shift code and cgroup
API calls around such that we can rely on native locking as much as
possible. But that's fragile, and sometimes we need to hold MM locks for
longer than we otherwise would (pte lock e.g.).
Mark the feature deprecated. Hopefully we can remove it soon.
And backport into -stable kernels so that people who develop against
earlier kernels are warned about this deprecation as early as possible.
[akpm@linux-foundation.org: fix memory.rst underlining]
Link: https://lkml.kernel.org/r/Y5COd+qXwk/S+n8N@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
