[ Upstream commit 62d91dd285 ]
The INTERRUPT_CNTL2 register expects a valid DMA address, but is
currently set with a GPU MC address. This can cause problems on
systems that detect the resulting DMA read from an invalid address
(found on a Power8 guest).
Instead, use the DMA address of the dummy page because it will always
be safe.
Fixes: d8f60cfc93 ("drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)")
Fixes: 25a857fbe9 ("drm/radeon/kms: add support for interrupts on SI")
Fixes: a59781bbe5 ("drm/radeon: add support for interrupts on CIK (v5)")
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78e31c4226 ]
On msm8998, vblank timeouts are observed because the DSI controller is not
reset properly, which ends up stalling the MDP. This is because the reset
logic is not correct per the hardware documentation.
The documentation states that after asserting reset, software should wait
some time (no indication of how long), or poll the status register until it
returns 0 before deasserting reset.
wmb() is insufficient for this purpose since it just ensures ordering, not
timing between writes. Since asserting and deasserting reset occurs on the
same register, ordering is already guaranteed by the architecture, making
the wmb extraneous.
Since we would define a timeout for polling the status register to avoid a
possible infinite loop, lets just use a static delay of 20 ms, since 16.666
ms is the time available to process one frame at 60 fps.
Fixes: a689554ba6 ("drm/msm: Initial add DSI connector support")
Cc: Hai Li <hali@codeaurora.org>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Sean Paul <sean@poorly.run>
[seanpaul renamed RESET_DELAY to DSI_RESET_TOGGLE_DELAY_MS]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011133939.16551-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b936e6122 ]
Using name "bridge" for macro bridge_to_rcar_lvds argument doesn't
work when the pointer name used by the caller is not "bridge".
Rename the argument to "b" to allow for any pointer name.
While at it, fix the connector_to_rcar_lvds macro similarly.
Fixes: c6a27fa41f ("drm: rcar-du: Convert LVDS encoder code to bridge driver")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[Fix connector_to_rcar_lvds]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f47bee2ba4 ]
These regs are write-only, and the hw throws a hissy-fit (ie. reboots)
when we try to read them for GPU state snapshot, in response to a GPU
hang. It is rather impolite when GPU recovery triggers an insta-
reboot, so lets remove the TPL1 registers from the snapshot.
Fixes: 7198e6b031 drm/msm: add a3xx gpu support
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc19cbb785 ]
If mdp5_cfg_init fails because of an unknown major version, a null pointer
dereference occurs. This is because the caller of init expects error
pointers, but init returns NULL on error. Fix this by returning the
expected values on error.
Fixes: 2e362e1772 (drm/msm/mdp5: introduce mdp5_cfg module)
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 785cf1eeaf ]
The NOUVEAU_GETPARAM_PCI_DEVICE case is missing a break statement and falls
through to the following NOUVEAU_GETPARAM_BUS_TYPE case and may end up
re-assigning the getparam->value to an undesired value. Fix this by adding
in the missing break.
Detected by CoverityScan, CID#1460507 ("Missing break in switch")
Fixes: 359088d5b8 ("drm/nouveau: remove trivial cases of nvxx_device() usage")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1d03fc36e ]
Currently the uninitialized values in the array reply are printed out
when exec is false and nvkm_pmu_send has not updated the array. Avoid
confusion by only dumping out these values if they have been actually
updated.
Detected by CoverityScan, CID#1271291 ("Uninitialized scaler variable")
Fixes: ebb58dc2ef ("drm/nouveau/pmu: rename from pwr (no binary change)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13649101a2 ]
Currently, the expression for calculating RON is always going to result
in zero no matter the value of ram->mr[1] because the ! operator has
higher precedence than the shift >> operator. I believe the missing
parentheses around the expression before appying the ! operator will
result in the desired result.
[ Note, not tested ]
Detected by CoveritScan, CID#1324005 ("Operands don't affect result")
Fixes: c25bf7b615 ("drm/nouveau/bios/ramcfg: Separate out RON pull value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e05352340 ]
The etnaviv_gem_prime_get_sg_table() is supposed to return error
pointers. Otherwise it can lead to a NULL dereference when it's called
from drm_gem_map_dma_buf().
Fixes: 5f4a4a73f4 ("drm/etnaviv: fix gem_prime_get_sg_table to return new SG table")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e1490cf43 ]
If register_framebuffer() fails during fbdev setup we will leak the
framebuffer, the GEM buffer and the shadow buffer for defio. This is
because drm_fb_helper_fbdev_setup() just calls drm_fb_helper_fini() on
error not taking into account that register_framebuffer() can fail.
Since the generic emulation uses DRM client for its framebuffer and
backing buffer in addition to a shadow buffer, it's necessary to open code
drm_fb_helper_fbdev_setup() to properly handle the error path.
Error cleanup is removed from .fb_probe and is handled by one function for
all paths.
Fixes: 9060d7f493 ("drm/fb-helper: Finish the generic fbdev emulation")
Reported-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190105181846.26495-1-noralf@tronnes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5fd9fd400 ]
The ->nr_signal is the supposed to be the number of elements in the
->signal array. There was one place where it was 5 but it was supposed
to be 4. That looks like a copy and paste bug. There were also two
checks that were off by one.
Fixes: 9e2c2e2730 ("drm/etnaviv: add infrastructure to query perf counter")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Tested-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c54c7374ff ]
Jerry Zuo pointed out a rather obscure hotplugging issue that it seems I
accidentally introduced into DRM two years ago.
Pretend we have a topology like this:
|- DP-1: mst_primary
|- DP-4: active display
|- DP-5: disconnected
|- DP-6: active hub
|- DP-7: active display
|- DP-8: disconnected
|- DP-9: disconnected
If we unplug DP-6, the topology starting at DP-7 will be destroyed but
it's payloads will live on in DP-1's VCPI allocations and thus require
removal. However, this removal currently fails because
drm_dp_update_payload_part1() will (rightly so) try to validate the port
before accessing it, fail then abort. If we keep going, eventually we
run the MST hub out of bandwidth and all new allocations will start to
fail (or in my case; all new displays just start flickering a ton).
We could just teach drm_dp_update_payload_part1() not to drop the port
ref in this case, but then we also need to teach
drm_dp_destroy_payload_step1() to do the same thing, then hope no one
ever adds anything to the that requires a validated port reference in
drm_dp_destroy_connector_work(). Kind of sketchy.
So let's go with a more clever solution: any port that
drm_dp_destroy_connector_work() interacts with is guaranteed to still
exist in memory until we say so. While said port might not be valid we
don't really care: that's the whole reason we're destroying it in the
first place! So, teach drm_dp_get_validated_port_ref() to use the all
mighty current_work() function to avoid attempting to validate ports
from the context of mgr->destroy_connector_work. I can't see any
situation where this wouldn't be safe, and this avoids having to play
whack-a-mole in the future of trying to work around port validation.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 263efde31f ("drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()")
Reported-by: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181113224613.28809-1-lyude@redhat.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfdb3be43e ]
The return from the call to _mixer_stages can be a negative error
code however this is being assigned to an unsigned variable 'stages'
hence the check is always false. Fix this by making 'stages' an
int.
Detected by Coccinelle ("Unsigned expression compared with zero:
stages < 0")
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ff9f49646 ]
Currently the driver overwrites the surface depth provided by the fb
helper to give an invalid bpp/surface depth combination.
This has been exposed by commit 70109354fe ("drm: Reject unknown legacy
bpp and depth for drm_mode_addfb ioctl"), which now causes the driver to
fail to probe.
Fix by not overwriting the surface depth.
Fixes: d1667b8679 ("drm/hisilicon/hibmc: Add support for frame buffer")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 15516bf9ab upstream.
If the BAR initialization failed it may leave the vmm structure in an
unitialized state, leading to a null-pointer-dereference when the vmm is
dereferenced during teardown.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sushma Kalakota <sushmax.kalakota@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc8a76a152 upstream.
Intel ID: PSIRT-TA-201910-001
CVEID: CVE-2019-14615
Intel GPU Hardware prior to Gen11 does not clear EU state
during a context switch. This can result in information
leakage between contexts.
For Gen8 and Gen9, hardware provides a mechanism for
fast cleardown of the EU state, by issuing a PIPE_CONTROL
with bit 27 set. We can use this in a context batch buffer
to explicitly cleardown the state on every context switch.
As this workaround is already in place for gen8, we can borrow
the code verbatim for Gen9.
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Kumar Valsan Prathap <prathap.kumar.valsan@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Balestrieri Francesco <francesco.balestrieri@intel.com>
Cc: Bloomfield Jon <jon.bloomfield@intel.com>
Cc: Dutt Sudeep <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4e4fccc5d upstream.
[Why]
According to DP spec, it should shift left 4 digits for NO_STOP_BIT
in REMOTE_I2C_READ message. Not 5 digits.
In current code, NO_STOP_BIT is always set to zero which means I2C
master is always generating a I2C stop at the end of each I2C write
transaction while handling REMOTE_I2C_READ sideband message. This issue
might have the generated I2C signal not meeting the requirement. Take
random read in I2C for instance, I2C master should generate a repeat
start to start to read data after writing the read address. This issue
will cause the I2C master to generate a stop-start rather than a
re-start which is not expected in I2C random read.
[How]
Correct the shifting value of NO_STOP_BIT for DP_REMOTE_I2C_READ case in
drm_dp_encode_sideband_req().
Changes since v1:(https://patchwork.kernel.org/patch/11312667/)
* Add more descriptions in commit and cc to stable
Fixes: ad7f8a1f9c ("drm/helper: add Displayport multi-stream helper (v0.6)")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200103055001.10287-1-Wayne.Lin@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f30e27779d upstream.
When userspace requests a video mode parameter value that is not
supported, frame buffer device drivers should round it up to a supported
value, if possible, instead of just rejecting it. This allows
applications to quickly scan for supported video modes.
Currently this rule is not followed for the number of bits per pixel,
causing e.g. "fbset -depth N" to fail, if N is smaller than the current
number of bits per pixel.
Fix this by returning an error only if bits per pixel is too large, and
setting it to the current value otherwise.
See also Documentation/fb/framebuffer.rst, Section 2 (Programmer's View
of /dev/fb*").
Fixes: 865afb1194 ("drm/fb-helper: reject any changes to the fbdev")
Cc: stable@vger.kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191230132734.4538-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4396393fb9 upstream.
In commit 0b8e7bbde5 ("drm/sun4i: tcon: Set min division of TCON0_DCLK
to 1.") it was assumed that all TCON variants support a minimum divider
of 1 if only DCLK was used.
However, the oldest generation of hardware only supports minimum divider
of 4 if only DCLK is used. If a divider of 1 was used on this old
hardware, some scrolling artifact would appear. A divider of 2 seemed
OK, but a divider of 3 had artifacts as well.
Set the minimum divider when outputing to parallel RGB based on the
hardware model, with a minimum of 4 for the oldest (A10/A10s/A13/A20)
hardware, and a minimum of 1 for the rest. A value is not set for the
TCON variants lacking channel 0.
This fixes the scrolling artifacts seen on my A13 tablet.
Fixes: 0b8e7bbde5 ("drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107070113.28951-1-wens@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 84c92365b2 ]
The driver forgets to call component_del in remove to match component_add
in probe.
Add the missed call to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 70082a52f9 upstream.
Without this header file, compile-testing may run into a missing
declaration:
drivers/gpu/drm/msm/msm_gpu.c:444:4: error: implicit declaration of function 'put_task_struct' [-Werror,-Wimplicit-function-declaration]
Fixes: 482f96324a ("drm/msm: Fix task dump in gpu recovery")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 37a68eab4c ]
Place the declaration of struct nouveau_conn_atom above that of
struct nouveau_connector. This commit makes no changes to the moved
block what so ever, it just moves it up a bit.
This is a preparation patch to fix some issues with connector handling
on pre nv50 displays (which do not use atomic modesetting).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a51d9f8fe7 ]
[Why]
In dc_link_is_dp_sink_present, if dal_ddc_open fails, then
dal_gpio_destroy_ddc is called, destroying pin_data and pin_clock. They
are created only on dc_construct, and next aux access will cause a panic.
[How]
Instead of calling dal_gpio_destroy_ddc, call dal_ddc_close.
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e807535da ]
When security violation from new vbios happens, data fabric is
risky to stop working. So prevent the direct access to DF
mmFabricConfigAccessControl from the new vbios and onwards.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17cf678a33 ]
The boolean variable pasid_mapping_needed is not initialized and
there are code paths that do not assign it any value before it is
is read later. Fix this by initializing pasid_mapping_needed to
false.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 6817bf283b ("drm/amdgpu: grab the id mgr lock while accessing passid_mapping")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d0e3ce52c ]
The INTERRUPT_CNTL2 register expects a valid DMA address, but is
currently set with a GPU MC address. This can cause problems on
systems that detect the resulting DMA read from an invalid address
(found on a Power8 guest).
Instead, use the DMA address of the dummy page because it will always
be safe.
Fixes: 27ae10641e ("drm/amdgpu: add interupt handler implementation for si v3")
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 946ab8db69 ]
The object fence is not set to NULL after its reference is dropped. As a
result, its reference may be dropped again if error occurs after that,
which may lead to a use after free bug. To avoid the issue, fence is
explicitly set to NULL after dropping its reference.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
