[ Upstream commit bd5b50b329e850d467e7bcc07b2b6bde3752fbda ]
There may be some a race condition between timer function
bttv_irq_timeout and bttv_remove. The timer is setup in
probe and there is no timer_delete operation in remove
function. When it hit kfree btv, the function might still be
invoked, which will cause use after free bug.
This bug is found by static analysis, it may be false positive.
Fix it by adding del_timer_sync invoking to the remove function.
cpu0 cpu1
bttv_probe
->timer_setup
->bttv_set_dma
->mod_timer;
bttv_remove
->kfree(btv);
->bttv_irq_timeout
->USE btv
Fixes: 162e6376ac ("media: pci: Convert timers to use timer_setup()")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fc29e3c9f682d4ad9b0764d44ecc6c19b000051 ]
The value of V4L2_CID_VBLANK control is initialized to default vblank
value of 640x480 when driver probe. When OV5640 work at DVP mode, the
control value won't update and lead to sensor can't output data if the
resolution remain the same as last time since incorrect total vertical
size. So update it when there is a new value applied.
Fixes: bce93b827d ("media: ov5640: Add VBLANK control")
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d66b45e1b082462c3e14528b83e18ee92362e456 ]
The "ret = " assignment was missing, so ov13b10_power_on() is not
checked for errors. Add the assignment.
Fixes: 6e28afd152 ("media: ov13b10: add PM control support based on power resources")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e481d52d363218a3e6feb31694da74b38b30fad ]
In case of encoded input VP9 data width that is not multiple of macroblock
size, which is 16 (e.g. 1080x1920 frames, where 1080 is multiple of 8), the
width is padded to be a multiple of macroblock size (for 1080x1920 frames,
that is 1088x1920).
The hantro_postproc_g2_enable() checks whether the encoded data width is
equal to decoded frame width, and if not, enables down-scale mode. For a
frame where input is 1080x1920 and output is 1088x1920, this is incorrect
as no down-scale happens, the frame is only padded. Enabling the down-scale
mode in this case results in corrupted frames.
Fix this by adjusting the check to test whether encoded data width is
greater than decoded frame width, and only in that case enable the
down-scale mode.
To generate input test data to trigger this bug, use e.g.:
$ gst-launch-1.0 videotestsrc ! video/x-raw,width=272,height=256,format=I420 ! \
vp9enc ! matroskamux ! filesink location=/tmp/test.vp9
To trigger the bug upon decoding (note that the NV12 must be forced, as
that assures the output data would pass the G2 postproc):
$ gst-launch-1.0 filesrc location=/tmp/test.vp9 ! matroskademux ! vp9parse ! \
v4l2slvp9dec ! video/x-raw,format=NV12 ! videoconvert ! fbdevsink
Fixes: 79c987de8b ("media: hantro: Use post processor scaling capacities")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88d4b23a629ebd34f682f770cb6c2116c851f7b8 ]
The i.MX8MM/N/P does not define the .reset op since reset of the VPU is
done by genpd. Check whether the .reset op is defined before calling it
to avoid NULL pointer dereference.
Note that the Fixes tag is set to the commit which removed the reset op
from i.MX8M Hantro G2 implementation, this is because before this commit
all the implementations did define the .reset op.
Fixes: 6971efb70a ("media: hantro: Allow i.MX8MQ G1 and G2 to run independently")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c2786632e20c8f0fd4004fae3b3490276e5e5da ]
The last buffer from before the change must be marked,
with the V4L2_BUF_FLAG_LAST flag,
similarly to the Drain sequence above.
Meanwhile if V4L2_DEC_CMD_STOP is sent before
the source change triggered,
we need to restore the is_draing flag after
the draining in dynamic resolution change.
Fixes: b4e1fb8643 ("media: imx-jpeg: Support dynamic resolution change")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99e1241049a92dd3e9a90a0f91e32ce390133278 ]
Afer commit 1fa5ae857b ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically.
Therefore, it needs to be freed, which is done by the driver core for
us once all references to the device are gone. Therefore, move the
dev_set_name() call immediately before the call device_register(), which
either succeeds (then the freeing will be done upon subsequent remvoal),
or puts the reference in the error call. Also, it is not unusual that the
return value of dev_set_name is not checked.
Fixes: 1fa5ae857b ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[linux@dominikbrodowski.net: simplification, commit message modified]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 402ab979b29126068e0b596b641422ff7490214c ]
As the comment of device_register() says, it should use put_device()
to give up the reference in the error path. Then, insofar resources
will be freed in pcmcia_release_dev(), the error path is no longer
needed. In particular, this means that the (previously missing) dropping
of the reference to &p_dev->function_config->ref is now handled by
pcmcia_release_dev().
Fixes: 360b65b95b ("[PATCH] pcmcia: make config_t independent, add reference counting")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[linux@dominikbrodowski.net: simplification, commit message rewrite]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3ea1b4847e49234e691c0d66bf030bd65bb7f2b ]
If device_register() returns error in pccardd(), it leads two issues:
1. The socket_released has never been completed, it will block
pcmcia_unregister_socket(), because of waiting for completion
of socket_released.
2. The device name allocated by dev_set_name() is leaked.
Fix this two issues by calling put_device() when device_register() fails.
socket_released can be completed in pcmcia_release_socket(), the name can
be freed in kobject_cleanup().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33d9c987bf8fb68a9292aba7cc4b1711fcb1be4d ]
commit 5d2ffbe4b8 ("cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport")
...moved the dport component registers from a raw component_reg_phys
passed in at dport instantiation time to a 'struct cxl_register_map'
populated with both the component register data *and* the "host" device
for mapping operations.
While typical CXL switch dports are mapped by their associated 'struct
cxl_port', an RCH host bridge dport registered by cxl_acpi needs to wait
until the cxl_mem driver makes the attachment to map the registers. This
is because there are no intervening 'struct cxl_port' instances between
the root cxl_port and the endpoint port in an RCH topology.
For now just mark the host as NULL in the RCH dport case until code that
needs to map the dport registers arrives.
This patch is not flagged for -stable since nothing in the current
driver uses the dport->comp_map.
Now, I am slightly uneasy that cxl_setup_comp_regs() sets map->host to a
wrong value and then cxl_dport_setup_regs() fixes it up, but the
alternatives I came up with are more messy. For example, adding an
@logdev to 'struct cxl_register_map' that the dev_printk()s can fall
back to when @host is NULL. I settled on "post-fixup+comment" since it
is only RCH dports that have this special case where register probing is
split between a host-bridge RCRB lookup and when cxl_mem_probe() does
the association of the cxl_memdev and endpoint port.
[moved rename of @comp_map to @reg_map into next patch]
Fixes: 5d2ffbe4b8 ("cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport")
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-4-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd22581f89537163f065e8ef7c125ce0fddf62cc ]
The primary role of @dev is to host the mappings for devm operations.
@dev is too ambiguous as a name. I.e. when does @dev refer to the
'struct device *' instance that the registers belong, and when does
@dev refer to the 'struct device *' instance hosting the mapping for
devm operations?
Clarify the role of @dev in cxl_register_map by renaming it to @host.
Also, rename local variables to 'host' where map->host is used.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-3-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 33d9c987bf8f ("cxl/port: Fix @host confusion in cxl_dport_setup_regs()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3531b27f1f04a6bc9c95cf00d40efe618d57aa93 ]
Fix a missed "goto out" to unlock on error to cleanup this splat:
WARNING: lock held when returning to user space!
6.6.0-rc3-lizhijian+ #213 Not tainted
------------------------------------------------
cxl/673 is leaving the kernel with locks still held!
1 lock held by cxl/673:
#0: ffffffffa013b9d0 (cxl_region_rwsem){++++}-{3:3}, at: commit_store+0x7d/0x3e0 [cxl_core]
In terms of user visible impact of this bug for backports:
cxl_region_invalidate_memregion() on x86 invokes wbinvd which is a
problematic instruction for virtualized environments. So, on virtualized
x86, cxl_region_invalidate_memregion() returns an error. This failure
case got missed because CXL memory-expander device passthrough is not a
production use case, and emulation of CXL devices is typically limited
to kernel development builds with CONFIG_CXL_REGION_INVALIDATION_TEST=y,
that makes cxl_region_invalidate_memregion() succeed.
In other words, the expected exposure of this bug is limited to CXL
subsystem development environments using QEMU that neglected
CONFIG_CXL_REGION_INVALIDATION_TEST=y.
Fixes: d1257d098a ("cxl/region: Move cache invalidation before region teardown, and before setup")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20231025085450.2514906-1-lizhijian@fujitsu.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cf36a85c1408f86a967fb1db721de1b89b9e675 ]
For auto-discovered regions the driver must assign each target to
a valid position in the region interleave set based on the decoder
topology.
The current implementation fails to parse valid decode topologies,
as it does not consider the child offset into a parent port. The sort
put all targets of one port ahead of another port when an interleave
was expected, causing the region assembly to fail.
Replace the existing relative sort with cxl_calc_interleave_pos() that
finds the exact position in a region interleave for an endpoint based
on a walk up the ancestral tree from endpoint to root decoder.
cxl_calc_interleave_pos() was introduced in a prior patch, so the work
here is to use it in cxl_region_sort_targets().
Remove the obsoleted helper functions from the prior sort.
Testing passes on pre-production hardware with BIOS defined regions
that natively trigger this autodiscovery path of the region driver.
Testing passes a CXL unit test using the dev_dbg() calculation test
(see cxl_region_attach()) across an expanded set of region configs:
1, 1, 1+1, 1+1+1, 2, 2+2, 2+2+2, 2+2+2+2, 4, 4+4, where each number
represents the count of endpoints per host bridge.
Fixes: a32320b71f ("cxl/region: Add region autodiscovery")
Reported-by: Dmytro Adamenko <dmytro.adamenko@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Link: https://lore.kernel.org/r/3946cc55ddc19678733eddc9de2c317749f43f3b.1698263080.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3e00c964fb943934af916f48f0dd43b5110c866 ]
Introduce a calculation to find a target's position in a region
interleave. Perform a self-test of the calculation on user-defined
regions.
The region driver uses the kernel sort() function to put region
targets in relative order. Positions are assigned based on each
target's index in that sorted list. That relative sort doesn't
consider the offset of a port into its parent port which causes
some auto-discovered regions to fail creation. In one failure case,
a 2 + 2 config (2 host bridges each with 2 endpoints), the sort
puts all the targets of one port ahead of another port when they
were expected to be interleaved.
In preparation for repairing the autodiscovery region assembly,
introduce a new method for discovering a target position in the
region interleave.
cxl_calc_interleave_pos() adds a method to find the target position by
ascending from an endpoint to a root decoder. The calculation starts
with the endpoint's local position and position in the parent port. It
traverses towards the root decoder and examines both position and ways
in order to allow the position to be refined all the way to the root
decoder.
This calculation: position = position * parent_ways + parent_pos;
applied iteratively yields the correct position.
Include a self-test that exercises this new position calculation against
every successfully configured user-defined region.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/0ac32c75cf81dd8b86bf07d70ff139d33c2300bc.1698263080.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 0cf36a85c140 ("cxl/region: Use cxl_calc_interleave_pos() for auto-discovery")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1110581412c7a223439bb3ecdcdd9f4432e08231 ]
match_decoder_by_range() and decoder_match_range() both determine
if an HPA range matches a decoder. The first does it for root
decoders and the second one operates on switch decoders.
Tidy these up with clear naming and make the switch helper more
like the root decoder helper in style and functionality. Make it
take the actual range, rather than an endpoint decoder from which
it extracts the range. Require an exact match on switch decoders,
because unlike a root decoder that maps an entire region, Linux
only supports 1:1 mapping of switch to endpoint decoders. Note that
root-decoders are a super-set of switch-decoders and the range they
cover is a super-set of a region, hence the use of range_contains() for
that case.
Aside from aesthetics and maintainability, this is in preparation
for reuse.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Link: https://lore.kernel.org/r/011b1f498e1758bb8df17c5951be00bd8d489e3b.1698263080.git.alison.schofield@intel.com
[djbw: fixup root decoder vs switch decoder range checks]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 0cf36a85c140 ("cxl/region: Use cxl_calc_interleave_pos() for auto-discovery")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2be36c09b6b07306be33519e1aa70d2e2a2161bb ]
The current implementation passes PIN_IO_INTA_OUT (2) as a mask and
PIN_IO_INTAPM (GENMASK(1, 0)) as a value.
Swap the variables to assign mask and value the right way.
This error was first introduced with the alarm support. For better or
worse it worked as expected because 0x02 was applied as a mask to 0x03,
resulting 0x02 anyway. This will of course not work for any other value.
Fixes: e5aac267a1 ("rtc: pcf85363: add alarm support")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231013-topic-pcf85363_regmap_update_bits-v1-1-c454f016f71f@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db10cb9b574675402bfd8fe1a31aafdd45b002df ]
CONFIG_DEBUG_SG highlights that get_{report,ext_report,derived_key)()}
are passing stack buffers as the @req_buf argument to
handle_guest_request(), generating a Call Trace of the following form:
WARNING: CPU: 0 PID: 1175 at include/linux/scatterlist.h:187 enc_dec_message+0x518/0x5b0 [sev_guest]
[..]
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:enc_dec_message+0x518/0x5b0 [sev_guest]
Call Trace:
<TASK>
[..]
handle_guest_request+0x135/0x520 [sev_guest]
get_ext_report+0x1ec/0x3e0 [sev_guest]
snp_guest_ioctl+0x157/0x200 [sev_guest]
Note that the above Call Trace was with the DEBUG_SG BUG_ON()s converted
to WARN_ON()s.
This is benign as long as there are no hardware crypto accelerators
loaded for the aead cipher, and no subsequent dma_map_sg() is performed
on the scatterlist. However, sev-guest can not assume the presence of
an aead accelerator nor can it assume that CONFIG_DEBUG_SG is disabled.
Resolve this bug by allocating virt_addr_valid() memory, similar to the
other buffers am @snp_dev instance carries, to marshal requests from
user buffers to kernel buffers.
Reported-by: Peter Gonda <pgonda@google.com>
Closes: http://lore.kernel.org/r/CAMkAt6r2VPPMZ__SQfJse8qWsUyYW3AgYbOUVM0S_Vtk=KvkxQ@mail.gmail.com
Fixes: fce96cf044 ("virt: Add SEV-SNP guest driver")
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Dionna Glaze <dionnaglaze@google.com>
Cc: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88d3917f82ed4215a2154432c26de1480a61b209 ]
Ira reports that removing cxl_mock_mem causes a crash with the following
trace:
BUG: kernel NULL pointer dereference, address: 0000000000000044
[..]
RIP: 0010:cxl_region_decode_reset+0x7f/0x180 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_region_detach+0xe8/0x210 [cxl_core]
cxl_decoder_kill_region+0x27/0x40 [cxl_core]
cxld_unregister+0x29/0x40 [cxl_core]
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1d2/0x210
bus_remove_device+0xd7/0x150
device_del+0x155/0x3e0
device_unregister+0x13/0x60
devm_release_action+0x4d/0x90
? __pfx_unregister_port+0x10/0x10 [cxl_core]
delete_endpoint+0x121/0x130 [cxl_core]
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1d2/0x210
bus_remove_device+0xd7/0x150
device_del+0x155/0x3e0
? lock_release+0x142/0x290
cdev_device_del+0x15/0x50
cxl_memdev_unregister+0x54/0x70 [cxl_core]
This crash is due to the clearing out the cxl_memdev's driver context
(@cxlds) before the subsystem is done with it. This is ultimately due to
the region(s), that this memdev is a member, being torn down and expecting
to be able to de-reference @cxlds, like here:
static int cxl_region_decode_reset(struct cxl_region *cxlr, int count)
...
if (cxlds->rcd)
goto endpoint_reset;
...
Fix it by keeping the driver context valid until memdev-device
unregistration, and subsequently the entire stack of related
dependencies, unwinds.
Fixes: 9cc238c7a5 ("cxl/pci: Introduce cdevm_file_operations")
Reported-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 339818380868e34ff2c482db05031bf47a67d609 ]
The sanitize operation is destructive and the expectation is that the
device is unmapped while in progress. The current implementation does a
lockless check for decoders being active, but then does nothing to
prevent decoders from racing to be committed. Introduce state tracking
to resolve this race.
This incidentally cleans up unpriveleged userspace from triggering mmio
read cycles by spinning on reading the 'security/state' attribute. Which
at a minimum is a waste since the kernel state machine can cache the
completion result.
Lastly cxl_mem_sanitize() was mistakenly marked EXPORT_SYMBOL() in the
original implementation, but an export was never required.
Fixes: 0c36b6ad43 ("cxl/mbox: Add sanitization handling machinery")
Cc: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f2da19714465739da2449253b13ac06cb353a26 ]
Fix a race condition between the mailbox-background command interrupt
firing and the security-state sysfs attribute being removed.
The race is difficult to see due to the awkward placement of the
sanitize-notifier setup code and the multiple places the teardown calls
are made, cxl_memdev_security_init() and cxl_memdev_security_shutdown().
Unify setup in one place, cxl_sanitize_setup_notifier(). Arrange for
the paired cxl_sanitize_teardown_notifier() to safely quiet the notifier
and let the cxl_memdev + irq be unregistered later in the flow.
Note: The special wrinkle of the sanitize notifier is that it interacts
with interrupts, which are enabled early in the flow, and it interacts
with memdev sysfs which is not initialized until late in the flow. Hence
why this setup routine takes an @cxlmd argument, and not just @mds.
This fix is also needed as a preparation fix for a memdev unregistration
crash.
Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Closes: http://lore.kernel.org/r/20230929100316.00004546@Huawei.com
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Fixes: 0c36b6ad43 ("cxl/mbox: Add sanitization handling machinery")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f29a824b0b6710328a78b018de3c2cfa9db65876 ]
It is all too easy to get confused about @dev usage in the CXL driver
stack. Before adding a new cxl_pci_probe() setup operation that has a
devm lifetime dependent on @cxlds->dev binding, but also references
@cxlmd->dev, and prints messages, rework the devm_cxl_add_memdev() and
cxl_memdev_setup_fw_upload() function signatures to make this
distinction explicit. I.e. pass in the devm context as an @host argument
rather than infer it from other objects.
This is in preparation for adding a devm_cxl_sanitize_setup_notifier().
Note the whitespace fixup near the change of the devm_cxl_add_memdev()
signature. That uncaught typo originated in the patch that added
cxl_memdev_security_init().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5f2da1971446 ("cxl/pci: Fix sanitize notifier setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2627c995c15dc375f4b5a591d782a14b1c0e3e7d ]
If dev_err_probe() is to be used it should at least be used consistently
within the same function. It is also worth questioning whether
every potential -ENOMEM needs an explicit error message.
Remove the cxl_setup_fw_upload() error prints for what are rare /
hardware-independent failures.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5f2da1971446 ("cxl/pci: Fix sanitize notifier setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e30a106558e7d1e06d1fcfd12466dc646673d03d ]
In preparation for fixing the init/teardown of the 'sanitize' workqueue
and sysfs notification mechanism, arrange for cxl_mbox_sanitize_work()
to be the single location where the sysfs attribute is notified. With
that change there is no distinction between polled mode and interrupt
mode. All the interrupt does is accelerate the polling interval.
The change to check for "mds->security.sanitize_node" under the lock is
there to ensure that the interrupt, the work routine and the
setup/teardown code can all have a consistent view of the registered
notifier and the workqueue state. I.e. the expectation is that the
interrupt is live past the point that the sanitize sysfs attribute is
published, and it may race teardown, so it must be consulted under a
lock. Given that new locking requirement, cxl_pci_mbox_irq() is moved
from hard to thread irq context.
Lastly, some opportunistic replacements of
"queue_delayed_work(system_wq, ...)", which is just open coded
schedule_delayed_work(), are included.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5f2da1971446 ("cxl/pci: Fix sanitize notifier setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76fe8713dd0a1331d84d767e8e5d3f365d959e8a ]
Given that any particular put_device() could be the final put of the
device, the fact that there are usages of cxlds->dev after
put_device(cxlds->dev) is a red flag. Drop the reference counting since
the device is pinned by being registered and will not be unregistered
without triggering the driver + workqueue to shutdown.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5f2da1971446 ("cxl/pci: Fix sanitize notifier setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e005a9b35b464be5b2e0194f717e90e7e496785d ]
Some devices (e.g. BCM72112) use an alarm_irq interrupt that is
connected to a level interrupt controller rather than an edge
interrupt controller. In this case, the interrupt cannot be left
enabled by the irq handler while preserving the hardware wake-up
signal on wake capable devices or an interrupt storm will occur.
The alarm_expired flag is introduced to allow the disabling of
the interrupt when an alarm expires and to support balancing the
calls to disable_irq() and enable_irq() in accordance with the
existing design.
Fixes: 24304a8715 ("rtc: brcmstb-waketimer: allow use as non-wake alarm")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230830224747.1663044-1-opendmb@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce07087964208eee2ca2f9ee4a98f8b5d9027fe6 ]
When p9pdu_readf() is called with "s?d" attribute, it allocates a pointer
that will store a string. But when p9pdu_readf() fails while handling "d"
then this pointer will not be freed in p9_check_errors().
Fixes: 51a87c552d ("9p: rework client code to use new protocol support functions")
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Message-ID: <20231027030302.11927-1-hbh25y@gmail.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36e826b568e412f61d68fedc02a67b4d8b7583cc ]
Since below commit, address mapping for vmemmap has changed for Radix
MMU, where address mapping is stored in kernel page table itself,
instead of earlier used 'vmemmap_list'.
commit 368a0590d9 ("powerpc/book3s64/vmemmap: switch radix to use
a different vmemmap handling function")
Hence with upstream kernel, in case of Radix MMU, makedumpfile fails
to do address translation for vmemmap addresses, as it depended on
vmemmap_list, which can now be empty.
While fixing the address translation in makedumpfile, it was identified
that currently makedumpfile cannot distinguish between Hash MMU and
Radix MMU, unless VMLINUX is passed with -x flag to makedumpfile. And
hence fails to assign offsets and shifts correctly (such as in L4 to
PGDIR offset calculation in makedumpfile).
For getting the MMU, makedumpfile uses `cur_cpu_spec.mmu_features`.
Add `cur_cpu_spec` symbol and offset of `mmu_features` in the `cpu_spec`
struct, to VMCOREINFO, so that makedumpfile can assign the offsets
correctly, without needing a VMLINUX.
Also, even along with `cur_cpu_spec->mmu_features` makedumpfile has to
depend on the 'MMU_FTR_TYPE_RADIX' flag in mmu_features, implying kernel
developers need to be cautious of changes to 'MMU_FTR_*' defines.
A more stable approach was suggested in the below thread by contributors:
https://lore.kernel.org/linuxppc-dev/20230920105706.853626-1-adityag@linux.ibm.com/
The suggestion was to add whether 'RADIX_MMU' is enabled in vmcoreinfo
This patch also implements the suggestion, by adding 'RADIX_MMU' in
vmcoreinfo, which makedumpfile can use to get whether the crashed system
had RADIX MMU (in which case 'NUMBER(RADIX_MMU)=1') or not (in which
case 'NUMBER(RADIX_MMU)=0')
Fixes: 368a0590d9 ("powerpc/book3s64/vmemmap: switch radix to use a different vmemmap handling function")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231023072612.50874-1-adityag@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5f928db59519a15e82ecba4ae3e7cbf5a44715a ]
If this driver enables the xHC clocks while resuming from sleep, it calls
clk_prepare_enable() without checking for errors and blithely goes on to
read/write the xHC's registers -- which, with the xHC not being clocked,
at least on ARM32 usually causes an imprecise external abort exceptions
which cause kernel oops. Currently, the chips for which the driver does
the clock dance on suspend/resume seem to be the Broadcom STB SoCs, based
on ARM32 CPUs, as it seems...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: 8bd954c561 ("usb: host: xhci-plat: suspend and resume clocks")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231019102924.2797346-19-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f8b6e5b11192dacb721d2d28ea4589917f5e822 ]
The CPI_STALL_RATIO metric group can be used to present the high
level CPI stall breakdown metrics in powerpc, which will show:
- DISPATCH_STALL_CPI ( Dispatch stall cycles per insn )
- ISSUE_STALL_CPI ( Issue stall cycles per insn )
- EXECUTION_STALL_CPI ( Execution stall cycles per insn )
- COMPLETION_STALL_CPI ( Completion stall cycles per insn )
Commit cf26e043c2 ("perf vendor events power10: Add JSON
metric events to present CPI stall cycles in powerpc)" which added
the CPI_STALL_RATIO metric group, also modified
the PMC value used in PM_RUN_INST_CMPL event from PMC4 to PMC5,
to avoid multiplexing of events.
But that got revert in recent changes. Fix this issue by changing
back the PMC value used in PM_RUN_INST_CMPL to PMC5.
Result with the fix:
./perf stat --metric-no-group -M CPI_STALL_RATIO <workload>
Performance counter stats for 'workload':
68,745,426 PM_CMPL_STALL # 0.21 COMPLETION_STALL_CPI
7,692,827 PM_ISSUE_STALL # 0.02 ISSUE_STALL_CPI
322,638,223 PM_RUN_INST_CMPL # 0.05 DISPATCH_STALL_CPI
# 0.48 EXECUTION_STALL_CPI
16,858,553 PM_DISP_STALL_CYC
153,880,133 PM_EXEC_STALL
0.089774592 seconds time elapsed
"--metric-no-group" is used for forcing PM_RUN_INST_CMPL to be scheduled
in all group for more accuracy.
Fixes: 7d473f475b ("perf vendor events: Move JSON/events to appropriate files for power10 platform")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel<disgoel@linux.ibm.com>
Cc: maddy@linux.ibm.com
Link: https://lore.kernel.org/r/20231016143110.244255-1-kjain@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 007240d59c11f87ac4f6cfc6a1d116630b6b634c ]
The macro __SPIN_LOCK_INITIALIZER() is implementation specific. Users
that desire to initialize a spinlock in a struct must use
__SPIN_LOCK_UNLOCKED().
Use __SPIN_LOCK_UNLOCKED() for the spinlock_t in imc_global_refc.
Fixes: 76d588dddc ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230309134831.Nz12nqsU@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73b25505ce043b561028e5571d84dc82aa53c2b4 ]
The VAS open window call prints error message and returns -EBUSY
after the migration suspend event initiated and until the resume
event completed on the destination system. It can cause the log
buffer filled with these error messages if the user space issues
continuous open window calls. Similar case even for DLPAR CPU
remove event when no credits are available until the credits are
freed or with the other DLPAR CPU add event.
So changes in the patch to use pr_err_ratelimited() instead of
pr_err() to display open window failure and not-available credits
error messages.
Use pr_fmt() and make the corresponding changes to have the
consistencein prefix all pr_*() messages (vas-api.c).
Fixes: 37e6764895 ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Use "vas-api" as the prefix to match the file name.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231019215033.1335251-1-haren@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d45c4b48dafb5820e5cc267ff9a6d7784d13a43c ]
A thread started via eg. user_mode_thread() runs in the kernel to begin
with and then may later return to userspace. While it's running in the
kernel it has a pt_regs at the base of its kernel stack, but that
pt_regs is all zeroes.
If the thread oopses in that state, it leads to an ugly stack trace with
a big block of zero GPRs, as reported by Joel:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc7-00004-gf7757129e3de-dirty #3
Hardware name: IBM PowerNV (emulated by qemu) POWER9 0x4e1200 opal:v7.0 PowerNV
Call Trace:
[c0000000036afb00] [c0000000010dd058] dump_stack_lvl+0x6c/0x9c (unreliable)
[c0000000036afb30] [c00000000013c524] panic+0x178/0x424
[c0000000036afbd0] [c000000002005100] mount_root_generic+0x250/0x324
[c0000000036afca0] [c0000000020057d0] prepare_namespace+0x2d4/0x344
[c0000000036afd20] [c0000000020049c0] kernel_init_freeable+0x358/0x3ac
[c0000000036afdf0] [c0000000000111b0] kernel_init+0x30/0x1a0
[c0000000036afe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c
--- interrupt: 0 at 0x0
NIP: 0000000000000000 LR: 0000000000000000 CTR: 0000000000000000
REGS: c0000000036afe80 TRAP: 0000 Not tainted (6.5.0-rc7-00004-gf7757129e3de-dirty)
MSR: 0000000000000000 <> CR: 00000000 XER: 00000000
CFAR: 0000000000000000 IRQMASK: 0
GPR00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR04: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR12: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR28: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
NIP [0000000000000000] 0x0
LR [0000000000000000] 0x0
--- interrupt: 0
The all-zero pt_regs looks ugly and conveys no useful information, other
than its presence. So detect that case and just show the presence of the
frame by printing the interrupt marker, eg:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc3-00126-g18e9506562a0-dirty #301
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
Call Trace:
[c000000003aabb00] [c000000001143db8] dump_stack_lvl+0x6c/0x9c (unreliable)
[c000000003aabb30] [c00000000014c624] panic+0x178/0x424
[c000000003aabbd0] [c0000000020050fc] mount_root_generic+0x250/0x324
[c000000003aabca0] [c0000000020057cc] prepare_namespace+0x2d4/0x344
[c000000003aabd20] [c0000000020049bc] kernel_init_freeable+0x358/0x3ac
[c000000003aabdf0] [c0000000000111b0] kernel_init+0x30/0x1a0
[c000000003aabe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c
--- interrupt: 0 at 0x0
To avoid ever suppressing a valid pt_regs make sure the pt_regs has a
zero MSR and TRAP value, and is located at the very base of the stack.
Fixes: 6895dfc047 ("powerpc: copy_thread fill in interrupt frame marker and back chain")
Reported-by: Joel Stanley <joel@jms.id.au>
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230824064210.907266-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac96a15a0f0c8812a3aaa587b871cd5527f6d736 ]
When MODULE_DEVICE_TABLE(ishtp, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/platform/x86/intel/ishtp_eclite.c
is built as a module for x86.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
MODULE_ALIAS("ishtp:{6A19CC4B-D760-4DE3-B14D-F25EBD0FBCD9}");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
MODULE_ALIAS("ishtp:{BD0FBCD9-F25E-B14D-4DE3-D7606A19CC4B}");
This issue has been unnoticed because the x86 kernel is most likely built
natively on an x86 host.
The guid field must not be reversed because guid_t is an array of __u8.
Fixes: fa443bc3c1 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f54e00e5842663c2cea501bbbdfa572c94348a3 ]
When MODULE_DEVICE_TABLE(tee, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/char/hw_random/optee-rng.c
is built as a module for ARM little-endian.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:ab7a617c-b8e7-4d8f-8301-d09b61036b64*");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:646b0361-9bd0-0183-8f4d-e7b87c617aab*");
The same problem also occurs when you enable CONFIG_CPU_BIG_ENDIAN,
and build it on a little-endian host.
This issue has been unnoticed because the ARM kernel is configured for
little-endian by default, and most likely built on a little-endian host
(cross-build on x86 or native-build on ARM).
The uuid field must not be reversed because uuid_t is an array of __u8.
Fixes: 0fc1db9d10 ("tee: add bus driver framework for TEE based devices")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
