commit f4032d615f upstream.
/dev/vtpmx is made visible before 'workqueue' is initialized, which can
lead to a memory corruption in the worst case scenario.
Address this by initializing 'workqueue' as the very first step of the
driver initialization.
Cc: stable@vger.kernel.org
Fixes: 6f99612e25 ("tpm: Proxy driver for supporting multiple emulated TPMs")
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@tuni.fi>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 968ab92616 upstream.
commit 4e5a04be88 ("pinctrl: amd: disable and mask interrupts on probe")
had a mistake in loop iteration 63 that it would clear offset 0xFC instead
of 0x100. Offset 0xFC is actually `WAKE_INT_MASTER_REG`. This was
clearing bits 13 and 15 from the register which significantly changed the
expected handling for some platforms for GPIO0.
commit b26cd9325b ("pinctrl: amd: Disable and mask interrupts on resume")
actually fixed this bug, but lead to regressions on Lenovo Z13 and some
other systems. This is because there was no handling in the driver for bit
15 debounce behavior.
Quoting a public BKDG:
```
EnWinBlueBtn. Read-write. Reset: 0. 0=GPIO0 detect debounced power button;
Power button override is 4 seconds. 1=GPIO0 detect debounced power button
in S3/S5/S0i3, and detect "pressed less than 2 seconds" and "pressed 2~10
seconds" in S0; Power button override is 10 seconds
```
Cross referencing the same master register in Windows it's obvious that
Windows doesn't use debounce values in this configuration. So align the
Linux driver to do this as well. This fixes wake on lid when
WAKE_INT_MASTER_REG is properly programmed.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217315
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230421120625.3366-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d3f87278bc ]
The kernel does not currently validate that both the minimum and maximum
ports of a port range are specified. This can lead user space to think
that a filter matching on a port range was successfully added, when in
fact it was not. For example, with a patched (buggy) iproute2 that only
sends the minimum port, the following commands do not return an error:
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp src_port 100-200 action pass
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp dst_port 100-200 action pass
# tc filter show dev swp1 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
filter protocol ip pref 1 flower chain 0 handle 0x2
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: gact action pass
random type none pass val 0
index 2 ref 1 bind 1
Fix by returning an error unless both ports are specified:
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp src_port 100-200 action pass
Error: Both min and max source ports must be specified.
We have an error talking to the kernel
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp dst_port 100-200 action pass
Error: Both min and max destination ports must be specified.
We have an error talking to the kernel
Fixes: 5c72299fba ("net: sched: cls_flower: Classify packets using port ranges")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd7d4c1281 ]
Pass extack down to fl_set_key_port_range() and set message on error.
Both the min and max ports would qualify as invalid attributes here.
Report the min one as invalid, as it's probably what makes the most
sense from a user point of view.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: d3f87278bc ("net/sched: flower: Ensure both minimum and maximum ports are specified")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8191213a58 ]
z_erofs_do_read_page() may loop infinitely due to the inappropriate
truncation in the below statement. Since the offset is 64 bits and min_t()
truncates the result to 32 bits. The solution is to replace unsigned int
with a 64-bit type, such as erofs_off_t.
cur = end - min_t(unsigned int, offset + end - map->m_la, end);
- For example:
- offset = 0x400160000
- end = 0x370
- map->m_la = 0x160370
- offset + end - map->m_la = 0x400000000
- offset + end - map->m_la = 0x00000000 (truncated as unsigned int)
- Expected result:
- cur = 0
- Actual result:
- cur = 0x370
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Fixes: 3883a79abd ("staging: erofs: introduce VLE decompression support")
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230710093410.44071-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 028e6e204a ]
The while-loop may break on one of the two conditions, either ID string
is empty or GUID matches. The second one, may never be reached if the
parsed string is not correct GUID. In such a case the loop will never
advance to check the next ID.
Break possible infinite loop by factoring out guid_parse_and_compare()
helper which may be moved to the generic header for everyone later on
and preventing from similar mistake in the future.
Interestingly that firstly it appeared when WMI was turned into a bus
driver, but later when duplicated GUIDs were checked, the while-loop
has been replaced by for-loop and hence no mistake made again.
Fixes: a48e23385f ("platform/x86: wmi: add context pointer field to struct wmi_device_id")
Fixes: 844af950da ("platform/x86: wmi: Turn WMI into a bus driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230621151155.78279-1-andriy.shevchenko@linux.intel.com
Tested-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6701cc8f70 ]
There is no need to split lines as they perfectly fit 80 character limit.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 028e6e204a ("platform/x86: wmi: Break possible infinite loop when parsing GUID")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9dffc1417 ]
There are types and helpers that are redefined with old names.
Convert the WMI library to use those types and helpers directly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 028e6e204a ("platform/x86: wmi: Break possible infinite loop when parsing GUID")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06a0716949 ]
Now in addrconf_mod_rs_timer(), reference idev depends on whether
rs_timer is not pending. Then modify rs_timer timeout.
There is a time gap in [1], during which if the pending rs_timer
becomes not pending. It will miss to hold idev, but the rs_timer
is activated. Thus rs_timer callback function addrconf_rs_timer()
will be executed and put idev later without holding idev. A refcount
underflow issue for idev can be caused by this.
if (!timer_pending(&idev->rs_timer))
in6_dev_hold(idev);
<--------------[1]
mod_timer(&idev->rs_timer, jiffies + when);
To fix the issue, hold idev if mod_timer() return 0.
Fixes: b7b1bfce0b ("ipv6: split duplicate address detection and router solicitation timer")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2790143f09 ]
As the devm_kcalloc may return NULL pointer,
it should be better to add check for the return
value, as same as the others.
Fixes: 7f46c8b3a5 ("NTB: ntb_tool: Add full multi-port NTB API support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8623ccbfc5 ]
If device_register() returns error, the name allocated by
dev_set_name() need be freed. As comment of device_register()
says, it should use put_device() to give up the reference in
the error path. So fix this by calling put_device(), then the
name can be freed in kobject_cleanup(), and client_dev is freed
in ntb_transport_client_release().
Fixes: fce8a7bb5b ("PCI-Express Non-Transparent Bridge Support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c3c796aca ]
A problem about ntb_hw_intel create debugfs failed is triggered with the
following log given:
[ 273.112733] Intel(R) PCI-E Non-Transparent Bridge Driver 2.0
[ 273.115342] debugfs: Directory 'ntb_hw_intel' with parent '/' already present!
The reason is that intel_ntb_pci_driver_init() returns
pci_register_driver() directly without checking its return value, if
pci_register_driver() failed, it returns without destroy the newly created
debugfs, resulting the debugfs of ntb_hw_intel can never be created later.
intel_ntb_pci_driver_init()
debugfs_create_dir() # create debugfs directory
pci_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when pci_register_driver() returns error.
Fixes: e26a5843f7 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98af0a33c1 ]
A problem about ntb_hw_amd create debugfs failed is triggered with the
following log given:
[ 618.431232] AMD(R) PCI-E Non-Transparent Bridge Driver 1.0
[ 618.433284] debugfs: Directory 'ntb_hw_amd' with parent '/' already present!
The reason is that amd_ntb_pci_driver_init() returns pci_register_driver()
directly without checking its return value, if pci_register_driver()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of ntb_hw_amd can never be created later.
amd_ntb_pci_driver_init()
debugfs_create_dir() # create debugfs directory
pci_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when pci_register_driver() returns error.
Fixes: a1b3695820 ("NTB: Add support for AMD PCI-Express Non-Transparent Bridge")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c012968259 ]
A problem about ntb_hw_idt create debugfs failed is triggered with the
following log given:
[ 1236.637636] IDT PCI-E Non-Transparent Bridge Driver 2.0
[ 1236.639292] debugfs: Directory 'ntb_hw_idt' with parent '/' already present!
The reason is that idt_pci_driver_init() returns pci_register_driver()
directly without checking its return value, if pci_register_driver()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of ntb_hw_idt can never be created later.
idt_pci_driver_init()
debugfs_create_dir() # create debugfs directory
pci_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when pci_register_driver() returns error.
Fixes: bf2a952d31 ("NTB: Add IDT 89HPESxNTx PCIe-switches support")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abfb2a58a5 ]
Remove unnecessary early code development check and the WARN_ON
that it uses. The irq alloc and free paths have long been
cleaned up and this check shouldn't have stuck around so long.
Fixes: 77ceb68e29 ("ionic: Add notifyq support")
Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36ac2c5092 ]
Change the ionic_intr_free parameter from struct ionic_lif to
struct ionic since that's what it actually cares about.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: abfb2a58a5 ("ionic: remove WARN_ON to prevent panic_on_warn")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b0641009b ]
Move the irq request and free out of the qcq_init and deinit
and into the alloc and free routines where they belong for
better resource management.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: abfb2a58a5 ("ionic: remove WARN_ON to prevent panic_on_warn")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9c17d39d5 ]
Add a little more cleanup when tearing down the queues.
Fixes: 1d062b7b6f ("ionic: Add basic adminq support")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: abfb2a58a5 ("ionic: remove WARN_ON to prevent panic_on_warn")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7f55b81f2 ]
Spreading the interrupts across the CPU cores is good for load
balancing, but not necessarily as good when using a CPU/core
that is not part of the NUMA local CPU. If it can be localized,
the kernel's cpumask_local_spread() service will pick a core
that is on the node close to the PCI device.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: abfb2a58a5 ("ionic: remove WARN_ON to prevent panic_on_warn")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0323bce598 ]
In the event of a failure in tcf_change_indev(), fw_set_parms() will
immediately return an error after incrementing or decrementing
reference counter in tcf_bind_filter(). If attacker can control
reference counter to zero and make reference freed, leading to
use after free.
In order to prevent this, move the point of possible failure above the
point where the TC_FW_CLASSID is handled.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: M A Ramdhan <ramdhan@starlabs.sg>
Signed-off-by: M A Ramdhan <ramdhan@starlabs.sg>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Message-ID: <20230705161530.52003-1-ramdhan@starlabs.sg>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cca28ceac7 ]
Remove unnecessary delay during the TX ring configuration.
This will cause delay, especially during link down and
link up activity.
Furthermore, old SKUs like as I225 will call the reset_adapter
to reset the controller during TSN mode Gate Control List (GCL)
setting. This will add more time to the configuration of the
real-time use case.
It doesn't mentioned about this delay in the Software User Manual.
It might have been ported from legacy code I210 in the past.
Fixes: 13b5b7fd6a ("igc: Add support for Tx/Rx rings")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a2654c0f6 ]
Add a type field to the drm_panel structure to report the panel type,
using DRM_MODE_CONNECTOR_* macros (the values that make sense are LVDS,
eDP, DSI and DPI). This will be used to initialise the corresponding
connector type.
Update all panel drivers accordingly. The panel-simple driver only
specifies the type for the known to be LVDS panels, while all other
panels are left as unknown and will be converted on a case-by-case
basis as they all need to be carefully reviewed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904132804.29680-2-laurent.pinchart@ideasonboard.com
Stable-dep-of: 2c56a75184 ("drm/panel: simple: Add connector_type for innolux_at043tn24")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6dbe0c4b0f ]
Instead of requiring all drivers to set the dev and funcs fields of
drm_panel manually after calling drm_panel_init(), pass the data as
arguments to the function. This simplifies the panel drivers, and will
help future refactoring when adding new arguments to drm_panel_init().
The panel drivers have been updated with the following Coccinelle
semantic patch, with manual inspection to verify that no call to
drm_panel_init() with a single argument still exists.
@@
expression panel;
expression device;
identifier ops;
@@
drm_panel_init(&panel
+ , device, &ops
);
...
(
-panel.dev = device;
-panel.funcs = &ops;
|
-panel.funcs = &ops;
-panel.dev = device;
)
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823193245.23876-3-laurent.pinchart@ideasonboard.com
Stable-dep-of: 2c56a75184 ("drm/panel: simple: Add connector_type for innolux_at043tn24")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit afa4bb778e upstream.
Dave Airlie reports that gcc-13.1.1 has started complaining about some
of the workqueue code in 32-bit arm builds:
kernel/workqueue.c: In function ‘get_work_pwq’:
kernel/workqueue.c:713:24: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
713 | return (void *)(data & WORK_STRUCT_WQ_DATA_MASK);
| ^
[ ... a couple of other cases ... ]
and while it's not immediately clear exactly why gcc started complaining
about it now, I suspect it's some C23-induced enum type handlign fixup in
gcc-13 is the cause.
Whatever the reason for starting to complain, the code and data types
are indeed disgusting enough that the complaint is warranted.
The wq code ends up creating various "helper constants" (like that
WORK_STRUCT_WQ_DATA_MASK) using an enum type, which is all kinds of
confused. The mask needs to be 'unsigned long', not some unspecified
enum type.
To make matters worse, the actual "mask and cast to a pointer" is
repeated a couple of times, and the cast isn't even always done to the
right pointer, but - as the error case above - to a 'void *' with then
the compiler finishing the job.
That's now how we roll in the kernel.
So create the masks using the proper types rather than some ambiguous
enumeration, and use a nice helper that actually does the type
conversion in one well-defined place.
Incidentally, this magically makes clang generate better code. That,
admittedly, is really just a sign of clang having been seriously
confused before, and cleaning up the typing unconfuses the compiler too.
Reported-by: Dave Airlie <airlied@gmail.com>
Link: https://lore.kernel.org/lkml/CAPM=9twNnV4zMCvrPkw3H-ajZOH-01JVh_kDrxdPYQErz8ZTdA@mail.gmail.com/
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6eef7a2b93 upstream.
If nf_conntrack_init_start() fails (for example due to a
register_nf_conntrack_bpf() failure), the nf_conntrack_helper_fini()
clean-up path frees the nf_ct_helper_hash map.
When built with NF_CONNTRACK=y, further netfilter modules (e.g:
netfilter_conntrack_ftp) can still be loaded and call
nf_conntrack_helpers_register(), independently of whether nf_conntrack
initialized correctly. This accesses the nf_ct_helper_hash dangling
pointer and causes a uaf, possibly leading to random memory corruption.
This patch guards nf_conntrack_helper_register() from accessing a freed
or uninitialized nf_ct_helper_hash pointer and fixes possible
uses-after-free when loading a conntrack module.
Cc: stable@vger.kernel.org
Fixes: 12f7a50533 ("netfilter: add user-space connection tracking helper infrastructure")
Signed-off-by: Florent Revest <revest@chromium.org>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ 2024439bd5 ]
nf_tables_check_loops() can be called from rhashtable list
walk so cond_resched() cannot be used here.
Fixes: 81ea010667 ("netfilter: nf_tables: add rescheduling points during loop detection walks")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ 3e70489721 ]
Otherwise a dangling reference to a rule object that is gone remains
in the set binding list.
Fixes: 26b5a5712e ("netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ 938154b93b ]
Add a new list to track set transaction and to check for unbound
anonymous sets before entering the commit phase.
Bail out at the end of the transaction handling if an anonymous set
remains unbound.
Fixes: 96518518cc ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ 26b5a5712e ]
Add a new state to deal with rule expressions deactivation from the
newrule error path, otherwise the anonymous set remains in the list in
inactive state for the next generation. Mark the set/chain transaction
as unbound so the abort path releases this object, set it as inactive in
the next generation so it is not reachable anymore from this transaction
and reference counter is dropped.
Fixes: 1240eb93f0 ("netfilter: nf_tables: incorrect error path handling with NFT_MSG_NEWRULE")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ 1240eb93f0 ]
In case of error when adding a new rule that refers to an anonymous set,
deactivate expressions via NFT_TRANS_PREPARE state, not NFT_TRANS_RELEASE.
Thus, the lookup expression marks anonymous sets as inactive in the next
generation to ensure it is not reachable in this transaction anymore and
decrement the set refcount as introduced by c1592a8994 ("netfilter:
nf_tables: deactivate anonymous set from preparation phase"). The abort
step takes care of undoing the anonymous set.
This is also consistent with rule deletion, where NFT_TRANS_PREPARE is
used. Note that this error path is exercised in the preparation step of
the commit protocol. This patch replaces nf_tables_rule_release() by the
deactivate and destroy calls, this time with NFT_TRANS_PREPARE.
Due to this incorrect error handling, it is possible to access a
dangling pointer to the anonymous set that remains in the transaction
list.
[1009.379054] BUG: KASAN: use-after-free in nft_set_lookup_global+0x147/0x1a0 [nf_tables]
[1009.379106] Read of size 8 at addr ffff88816c4c8020 by task nft-rule-add/137110
[1009.379116] CPU: 7 PID: 137110 Comm: nft-rule-add Not tainted 6.4.0-rc4+ #256
[1009.379128] Call Trace:
[1009.379132] <TASK>
[1009.379135] dump_stack_lvl+0x33/0x50
[1009.379146] ? nft_set_lookup_global+0x147/0x1a0 [nf_tables]
[1009.379191] print_address_description.constprop.0+0x27/0x300
[1009.379201] kasan_report+0x107/0x120
[1009.379210] ? nft_set_lookup_global+0x147/0x1a0 [nf_tables]
[1009.379255] nft_set_lookup_global+0x147/0x1a0 [nf_tables]
[1009.379302] nft_lookup_init+0xa5/0x270 [nf_tables]
[1009.379350] nf_tables_newrule+0x698/0xe50 [nf_tables]
[1009.379397] ? nf_tables_rule_release+0xe0/0xe0 [nf_tables]
[1009.379441] ? kasan_unpoison+0x23/0x50
[1009.379450] nfnetlink_rcv_batch+0x97c/0xd90 [nfnetlink]
[1009.379470] ? nfnetlink_rcv_msg+0x480/0x480 [nfnetlink]
[1009.379485] ? __alloc_skb+0xb8/0x1e0
[1009.379493] ? __alloc_skb+0xb8/0x1e0
[1009.379502] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[1009.379509] ? unwind_get_return_address+0x2a/0x40
[1009.379517] ? write_profile+0xc0/0xc0
[1009.379524] ? avc_lookup+0x8f/0xc0
[1009.379532] ? __rcu_read_unlock+0x43/0x60
Fixes: 958bee14d0 ("netfilter: nf_tables: use new transaction infrastructure to handle sets")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ 0854db2aae ]
This moves all nf_tables pernet data from struct net to a net_generic
extension, with the exception of the gencursor.
The latter is used in the data path and also outside of the nf_tables
core. All others are only used from the configuration plane.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ 19c28b1374 ]
This patch adds a helper function to set up the netlink and nfnetlink headers.
Update existing codebase to use it.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
