commit 0bdf8a8245 upstream.
ECRYPTFS_SIZE_AND_MARKER_BYTES is type size_t, so if "rc" is negative
that gets type promoted to a high positive value and treated as success.
Fixes: 778aeb42a7 ("eCryptfs: Cleanup and optimize ecryptfs_lookup_interpose()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[tyhicks: Use "if/else if" rather than "if/if"]
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f474c28fbc upstream.
powerpc hardware triggers watchpoint before executing the instruction.
To make trigger-after-execute behavior, kernel emulates the
instruction. If the instruction is 'load something into non-volatile
register', exception handler should restore emulated register state
while returning back, otherwise there will be register state
corruption. eg, adding a watchpoint on a list can corrput the list:
# cat /proc/kallsyms | grep kthread_create_list
c00000000121c8b8 d kthread_create_list
Add watchpoint on kthread_create_list->prev:
# perf record -e mem:0xc00000000121c8c0
Run some workload such that new kthread gets invoked. eg, I just
logged out from console:
list_add corruption. next->prev should be prev (c000000001214e00), \
but was c00000000121c8b8. (next=c00000000121c8b8).
WARNING: CPU: 59 PID: 309 at lib/list_debug.c:25 __list_add_valid+0xb4/0xc0
CPU: 59 PID: 309 Comm: kworker/59:0 Kdump: loaded Not tainted 5.1.0-rc7+ #69
...
NIP __list_add_valid+0xb4/0xc0
LR __list_add_valid+0xb0/0xc0
Call Trace:
__list_add_valid+0xb0/0xc0 (unreliable)
__kthread_create_on_node+0xe0/0x260
kthread_create_on_node+0x34/0x50
create_worker+0xe8/0x260
worker_thread+0x444/0x560
kthread+0x160/0x1a0
ret_from_kernel_thread+0x5c/0x70
List corruption happened because it uses 'load into non-volatile
register' instruction:
Snippet from __kthread_create_on_node:
c000000000136be8: addis r29,r2,-19
c000000000136bec: ld r29,31424(r29)
if (!__list_add_valid(new, prev, next))
c000000000136bf0: mr r3,r30
c000000000136bf4: mr r5,r28
c000000000136bf8: mr r4,r29
c000000000136bfc: bl c00000000059a2f8 <__list_add_valid+0x8>
Register state from WARN_ON():
GPR00: c00000000059a3a0 c000007ff23afb50 c000000001344e00 0000000000000075
GPR04: 0000000000000000 0000000000000000 0000001852af8bc1 0000000000000000
GPR08: 0000000000000001 0000000000000007 0000000000000006 00000000000004aa
GPR12: 0000000000000000 c000007ffffeb080 c000000000137038 c000005ff62aaa00
GPR16: 0000000000000000 0000000000000000 c000007fffbe7600 c000007fffbe7370
GPR20: c000007fffbe7320 c000007fffbe7300 c000000001373a00 0000000000000000
GPR24: fffffffffffffef7 c00000000012e320 c000007ff23afcb0 c000000000cb8628
GPR28: c00000000121c8b8 c000000001214e00 c000007fef5b17e8 c000007fef5b17c0
Watchpoint hit at 0xc000000000136bec.
addis r29,r2,-19
=> r29 = 0xc000000001344e00 + (-19 << 16)
=> r29 = 0xc000000001214e00
ld r29,31424(r29)
=> r29 = *(0xc000000001214e00 + 31424)
=> r29 = *(0xc00000000121c8c0)
0xc00000000121c8c0 is where we placed a watchpoint and thus this
instruction was emulated by emulate_step. But because handle_dabr_fault
did not restore emulated register state, r29 still contains stale
value in above register state.
Fixes: 5aae8a5370 ("powerpc, hw_breakpoints: Implement hw_breakpoints for 64-bit server processors")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: stable@vger.kernel.org # 2.6.36+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ecb78ef56 upstream.
Previously, only IBAT1 and IBAT2 were used to map kernel linear mem.
Since commit 63b2bc6195 ("powerpc/mm/32s: Use BATs for
STRICT_KERNEL_RWX"), we may have all 8 BATs used for mapping
kernel text. But the suspend/restore functions only save/restore
BATs 0 to 3, and clears BATs 4 to 7.
Make suspend and restore functions respectively save and reload
the 8 BATs on CPUs having MMU_FTR_USE_HIGH_BATS feature.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10835c8546 upstream.
On parisc the privilege level of a process is stored in the lowest two bits of
the instruction pointers (IAOQ0 and IAOQ1). On Linux we use privilege level 0
for the kernel and privilege level 3 for user-space. So userspace should not be
allowed to modify IAOQ0 or IAOQ1 of a ptraced process to change it's privilege
level to e.g. 0 to try to gain kernel privileges.
This patch prevents such modifications by always setting the two lowest bits to
one (which relates to privilege level 3 for user-space) if IAOQ0 or IAOQ1 are
modified via ptrace calls in the native and compat ptrace paths.
Link: https://bugs.gentoo.org/481768
Reported-by: Jeroen Roovers <jer@gentoo.org>
Cc: <stable@vger.kernel.org>
Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 34c32fc603 upstream.
On parisc the privilege level of a process is stored in the lowest two bits of
the instruction pointers (IAOQ0 and IAOQ1). On Linux we use privilege level 0
for the kernel and privilege level 3 for user-space. So userspace should not be
allowed to modify IAOQ0 or IAOQ1 of a ptraced process to change it's privilege
level to e.g. 0 to try to gain kernel privileges.
This patch prevents such modifications in the regset support functions by
always setting the two lowest bits to one (which relates to privilege level 3
for user-space) if IAOQ0 or IAOQ1 are modified via ptrace regset calls.
Link: https://bugs.gentoo.org/481768
Cc: <stable@vger.kernel.org> # v4.7+
Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a98764567 upstream.
Commit a78ff11122 ("um: add extended processor state save/restore
support") and b6024b21fe ("um: extend fpstate to _xstate to support
YMM registers") forced the use of the x86 FP _xstate and
PTRACE_GETREGSET/SETREGSET. On older hosts, we would neither be able to
build UML nor run it anymore with these two commits applied because we
don't have definitions for struct _xstate nor these two ptrace requests.
We can determine at build time which fp context structure to check
against, just like we can keep using the old i387 fp save/restore if
PTRACE_GETRESET/SETREGSET are not defined.
Fixes: a78ff11122 ("um: add extended processor state save/restore support")
Fixes: b6024b21fe ("um: extend fpstate to _xstate to support YMM registers")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed527b13d8 upstream.
The CAAM driver currently violates an undocumented and slightly
controversial requirement imposed by the crypto stack that a buffer
referred to by the request structure via its virtual address may not
be modified while any scatterlists passed via the same request
structure are mapped for inbound DMA.
This may result in errors like
alg: aead: decryption failed on test 1 for gcm_base(ctr-aes-caam,ghash-generic): ret=74
alg: aead: Failed to load transform for gcm(aes): -2
on non-cache coherent systems, due to the fact that the GCM driver
passes an IV buffer by virtual address which shares a cacheline with
the auth_tag buffer passed via a scatterlist, resulting in corruption
of the auth_tag when the IV is updated while the DMA mapping is live.
Since the IV that is returned to the caller is only valid for CBC mode,
and given that the in-kernel users of CBC (such as CTS) don't trigger the
same issue as the GCM driver, let's just disable the output IV generation
for all modes except CBC for the time being.
Fixes: 854b06f768 ("crypto: caam - properly set IV after {en,de}crypt")
Cc: Horia Geanta <horia.geanta@nxp.com>
Cc: Iuliana Prodan <iuliana.prodan@nxp.com>
Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
[ Horia: backported to 4.9 ]
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e74d2ebdda upstream.
After we send a PCI_EJECTION_COMPLETE message to the host, the host will
immediately send us a PCI_BUS_RELATIONS message with
relations->device_count == 0, so pci_devices_present_work(), running on
another thread, can find the being-ejected device, mark the
hpdev->reported_missing to true, and run list_move_tail()/list_del() for
the device -- this races hv_eject_device_work() -> list_del().
Move the list_del() in hv_eject_device_work() to an earlier place, i.e.,
before we send PCI_EJECTION_COMPLETE, so later the
pci_devices_present_work() can't see the device.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jake Oshins <jakeo@microsoft.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7fa0a1da3d upstream.
Patch series "Coda updates".
The following patch series is a collection of various fixes for Coda,
most of which were collected from linux-fsdevel or linux-kernel but
which have as yet not found their way upstream.
This patch (of 22):
Various file systems expect that vma->vm_file points at their own file
handle, several use file_inode(vma->vm_file) to get at their inode or
use vma->vm_file->private_data. However the way Coda wrapped mmap on a
host file broke this assumption, vm_file was still pointing at the Coda
file and the host file systems would scribble over Coda's inode and
private file data.
This patch fixes the incorrect expectation and wraps vm_ops->open and
vm_ops->close to allow Coda to track when the vm_area_struct is
destroyed so we still release the reference on the Coda file handle at
the right time.
[This patch differs from the original upstream patch because older stable
kernels do not have the call_mmap vfs helper so we call f_ops->mmap
directly.]
Link: http://lkml.kernel.org/r/0e850c6e59c0b147dc2dcd51a3af004c948c3697.1558117389.git.jaharkes@cs.cmu.edu
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit da99466ac2 ]
This fixes a global out-of-bounds read access in the copy_buffer
function of the floppy driver.
The FDDEFPRM ioctl allows one to set the geometry of a disk. The sect
and head fields (unsigned int) of the floppy_drive structure are used to
compute the max_sector (int) in the make_raw_rw_request function. It is
possible to overflow the max_sector. Next, max_sector is passed to the
copy_buffer function and used in one of the memcpy calls.
An unprivileged user could trigger the bug if the device is accessible,
but requires a floppy disk to be inserted.
The patch adds the check for the .sect * .head multiplication for not
overflowing in the set_geometry function.
The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9b04609b78 ]
This fixes the invalid pointer dereference in the drive_name function of
the floppy driver.
The native_format field of the struct floppy_drive_params is used as
floppy_type array index in the drive_name function. Thus, the field
should be checked the same way as the autodetect field.
To trigger the bug, one could use a value out of range and set the drive
parameters with the FDSETDRVPRM ioctl. Next, FDGETDRVTYP ioctl should
be used to call the drive_name. A floppy disk is not required to be
inserted.
CAP_SYS_ADMIN is required to call FDSETDRVPRM.
The patch adds the check for a value of the native_format field to be in
the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array
indices.
The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5635f897ed ]
This fixes a global out-of-bounds read access in the next_valid_format
function of the floppy driver.
The values from autodetect field of the struct floppy_drive_params are
used as indices for the floppy_type array in the next_valid_format
function 'floppy_type[DP->autodetect[probed_format]].sect'.
To trigger the bug, one could use a value out of range and set the drive
parameters with the FDSETDRVPRM ioctl. A floppy disk is not required to
be inserted.
CAP_SYS_ADMIN is required to call FDSETDRVPRM.
The patch adds the check for values of the autodetect field to be in the
'0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices.
The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f3554aeb99 ]
This fixes a divide by zero error in the setup_format_params function of
the floppy driver.
Two consecutive ioctls can trigger the bug: The first one should set the
drive geometry with such .sect and .rate values for the F_SECT_PER_TRACK
to become zero. Next, the floppy format operation should be called.
A floppy disk is not required to be inserted. An unprivileged user
could trigger the bug if the device is accessible.
The patch checks F_SECT_PER_TRACK for a non-zero value in the
set_geometry function. The proper check should involve a reasonable
upper limit for the .sect and .rate fields, but it could change the
UAPI.
The patch also checks F_SECT_PER_TRACK in the setup_format_params, and
cancels the formatting operation in case of zero.
The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e3e888dfc upstream.
At namespace creation time there is the potential for the "expected to
be zero" fields of a 'pfn' info-block to be filled with indeterminate
data. While the kernel buffer is zeroed on allocation it is immediately
overwritten by nd_pfn_validate() filling it with the current contents of
the on-media info-block location. For fields like, 'flags' and the
'padding' it potentially means that future implementations can not rely on
those fields being zero.
In preparation to stop using the 'start_pad' and 'end_trunc' fields for
section alignment, arrange for fields that are not explicitly
initialized to be guaranteed zero. Bump the minor version to indicate
it is safe to assume the 'padding' and 'flags' are zero. Otherwise,
this corruption is expected to benign since all other critical fields
are explicitly initialized.
Note The cc: stable is about spreading this new policy to as many
kernels as possible not fixing an issue in those kernels. It is not
until the change titled "libnvdimm/pfn: Stop padding pmem namespaces to
section alignment" where this improper initialization becomes a problem.
So if someone decides to backport "libnvdimm/pfn: Stop padding pmem
namespaces to section alignment" (which is not tagged for stable), make
sure this pre-requisite is flagged.
Link: http://lkml.kernel.org/r/156092356065.979959.6681003754765958296.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: 32ab0a3f51 ("libnvdimm, pmem: 'struct page' for pmem")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [ppc64]
Cc: <stable@vger.kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 179006688a upstream.
If the range for which we are punching a hole covers only part of a page,
we end up updating the inode item but we skip the update of the inode's
iversion, mtime and ctime. Fix that by ensuring we update those properties
of the inode.
A patch for fstests test case generic/059 that tests this as been sent
along with this fix.
Fixes: 2aaa665581 ("Btrfs: add hole punching")
Fixes: e8c1c76e80 ("Btrfs: add missing inode update when punching hole")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 000dd5316e upstream.
PME polling does not take into account that a device that is directly
connected to the host bridge may go into D3cold as well. This leads to a
situation where the PME poll thread reads from a config space of a
device that is in D3cold and gets incorrect information because the
config space is not accessible.
Here is an example from Intel Ice Lake system where two PCIe root ports
are in D3cold (I've instrumented the kernel to log the PMCSR register
contents):
[ 62.971442] pcieport 0000:00:07.1: Check PME status, PMCSR=0xffff
[ 62.971504] pcieport 0000:00:07.0: Check PME status, PMCSR=0xffff
Since 0xffff is interpreted so that PME is pending, the root ports will
be runtime resumed. This repeats over and over again essentially
blocking all runtime power management.
Prevent this from happening by checking whether the device is in D3cold
before its PME status is read.
Fixes: 71a83bd727 ("PCI/PM: add runtime PM support to PCIe port")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: 3.6+ <stable@vger.kernel.org> # v3.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf144f81a9 upstream.
Testing padata with the tcrypt module on a 5.2 kernel...
# modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3
# modprobe tcrypt mode=211 sec=1
...produces this splat:
INFO: task modprobe:10075 blocked for more than 120 seconds.
Not tainted 5.2.0-base+ #16
modprobe D 0 10075 10064 0x80004080
Call Trace:
? __schedule+0x4dd/0x610
? ring_buffer_unlock_commit+0x23/0x100
schedule+0x6c/0x90
schedule_timeout+0x3b/0x320
? trace_buffer_unlock_commit_regs+0x4f/0x1f0
wait_for_common+0x160/0x1a0
? wake_up_q+0x80/0x80
{ crypto_wait_req } # entries in braces added by hand
{ do_one_aead_op }
{ test_aead_jiffies }
test_aead_speed.constprop.17+0x681/0xf30 [tcrypt]
do_test+0x4053/0x6a2b [tcrypt]
? 0xffffffffa00f4000
tcrypt_mod_init+0x50/0x1000 [tcrypt]
...
The second modprobe command never finishes because in padata_reorder,
CPU0's load of reorder_objects is executed before the unlocking store in
spin_unlock_bh(pd->lock), causing CPU0 to miss CPU1's increment:
CPU0 CPU1
padata_reorder padata_do_serial
LOAD reorder_objects // 0
INC reorder_objects // 1
padata_reorder
TRYLOCK pd->lock // failed
UNLOCK pd->lock
CPU0 deletes the timer before returning from padata_reorder and since no
other job is submitted to padata, modprobe waits indefinitely.
Add a pair of full barriers to guarantee proper ordering:
CPU0 CPU1
padata_reorder padata_do_serial
UNLOCK pd->lock
smp_mb()
LOAD reorder_objects
INC reorder_objects
smp_mb__after_atomic()
padata_reorder
TRYLOCK pd->lock
smp_mb__after_atomic is needed so the read part of the trylock operation
comes after the INC, as Andrea points out. Thanks also to Andrea for
help with writing a litmus test.
Fixes: 16295bec63 ("padata: Generic parallelization/serialization interface")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: <stable@vger.kernel.org>
Cc: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7cb95eeea6 upstream.
It turns out that while disabling i2c bus access from software when the
GPU is suspended was a step in the right direction with:
commit 342406e4fb ("drm/nouveau/i2c: Disable i2c bus access after
->fini()")
We also ended up accidentally breaking the vbios init scripts on some
older Tesla GPUs, as apparently said scripts can actually use the i2c
bus. Since these scripts are executed before initializing any
subdevices, we end up failing to acquire access to the i2c bus which has
left a number of cards with their fan controllers uninitialized. Luckily
this doesn't break hardware - it just means the fan gets stuck at 100%.
This also means that we've always been using our i2c busses before
initializing them during the init scripts for older GPUs, we just didn't
notice it until we started preventing them from being used until init.
It's pretty impressive this never caused us any issues before!
So, fix this by initializing our i2c pad and busses during subdev
pre-init. We skip initializing aux busses during pre-init, as those are
guaranteed to only ever be used by nouveau for DP aux transactions.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Tested-by: Marc Meledandri <m.meledandri@gmail.com>
Fixes: 342406e4fb ("drm/nouveau/i2c: Disable i2c bus access after ->fini()")
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ec27ec735 upstream.
Normally, the inode's i_uid/i_gid are translated relative to s_user_ns,
but this is not a correct behavior for proc. Since sysctl permission
check in test_perm is done against GLOBAL_ROOT_[UG]ID, it makes more
sense to use these values in u_[ug]id of proc inodes. In other words:
although uid/gid in the inode is not read during test_perm, the inode
logically belongs to the root of the namespace. I have confirmed this
with Eric Biederman at LPC and in this thread:
https://lore.kernel.org/lkml/87k1kzjdff.fsf@xmission.com
Consequences
============
Since the i_[ug]id values of proc nodes are not used for permissions
checks, this change usually makes no functional difference. However, it
causes an issue in a setup where:
* a namespace container is created without root user in container -
hence the i_[ug]id of proc nodes are set to INVALID_[UG]ID
* container creator tries to configure it by writing /proc/sys files,
e.g. writing /proc/sys/kernel/shmmax to configure shared memory limit
Kernel does not allow to open an inode for writing if its i_[ug]id are
invalid, making it impossible to write shmmax and thus - configure the
container.
Using a container with no root mapping is apparently rare, but we do use
this configuration at Google. Also, we use a generic tool to configure
the container limits, and the inability to write any of them causes a
failure.
History
=======
The invalid uids/gids in inodes first appeared due to 8175435777 (fs:
Update i_[ug]id_(read|write) to translate relative to s_user_ns).
However, AFAIK, this did not immediately cause any issues. The
inability to write to these "invalid" inodes was only caused by a later
commit 0bd23d09b8 (vfs: Don't modify inodes with a uid or gid unknown
to the vfs).
Tested: Used a repro program that creates a user namespace without any
mapping and stat'ed /proc/$PID/root/proc/sys/kernel/shmmax from outside.
Before the change, it shows the overflow uid, with the change it's 0.
The overflow uid indicates that the uid in the inode is not correct and
thus it is not possible to open the file for writing.
Link: http://lkml.kernel.org/r/20190708115130.250149-1-rburny@google.com
Fixes: 0bd23d09b8 ("vfs: Don't modify inodes with a uid or gid unknown to the vfs")
Signed-off-by: Radoslaw Burny <rburny@google.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: John Sperbeck <jsperbeck@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba24eee668 upstream.
The Tegra AGIC interrupt controller is an ARM GIC400 interrupt
controller. Per the ARM GIC device-tree binding, the first address
region is for the GIC distributor registers and the second address
region is for the GIC CPU interface registers. The address space for
the distributor registers is 4kB, but currently this is incorrectly
defined as 8kB for the Tegra AGIC and overlaps with the CPU interface
registers. Correct the address space for the distributor to be 4kB.
Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: bcdbde4335 ("arm64: tegra: Add AGIC node for Tegra210")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6fc3977ccc upstream.
If a perf_event creation fails due to any reason of the host perf
subsystem, it has no chance to log the corresponding event for guest
which may cause abnormal sampling data in guest result. In debug mode,
this message helps to understand the state of vPMC and we may not
limit the number of occurrences but not in a spamming style.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07d89227a9 upstream.
cfg->type can be overridden by v4l2_ctrl_fill() and the new value is
stored in the local type var. Fix the tests to use this local var.
Fixes: 0996517cf8 ("V4L/DVB: v4l2: Add new control handling framework")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
[hverkuil-cisco@xs4all.nl: change to !qmenu and !qmenu_int (checkpatch)]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ede34f397d upstream.
The fix for the racy writes and ioctls to sequencer widened the
application of client->ioctl_mutex to the whole write loop. Although
it does unlock/relock for the lengthy operation like the event dup,
the loop keeps the ioctl_mutex for the whole time in other
situations. This may take quite long time if the user-space would
give a huge buffer, and this is a likely cause of some weird behavior
spotted by syzcaller fuzzer.
This patch puts a simple workaround, just adding a mutex break in the
loop when a large number of events have been processed. This
shouldn't hit any performance drop because the threshold is set high
enough for usual operations.
Fixes: 7bd8009156 ("ALSA: seq: More protection for concurrent write and ioctl races")
Reported-by: syzbot+97aae04ce27e39cbfca9@syzkaller.appspotmail.com
Reported-by: syzbot+4c595632b98bb8ffcc66@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aeb8724653 upstream.
All mapping iterator logic is based on the assumption that sg->offset
is always lower than PAGE_SIZE.
But there are situations where sg->offset is such that the SG item
is on the second page. In that case sg_copy_to_buffer() fails
properly copying the data into the buffer. One of the reason is
that the data will be outside the kmapped area used to access that
data.
This patch fixes the issue by adjusting the mapping iterator
offset and pgoffset fields such that offset is always lower than
PAGE_SIZE.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 4225fc8555 ("lib/scatterlist: use page iterator in the mapping iterator")
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44942b4e45 upstream.
According to the open() manpage, Linux reserves the access mode 3
to mean "check for read and write permission on the file and return
a file descriptor that can't be used for reading or writing."
Currently, the NFSv4 code will ask the server to open the file,
and will use an incorrect share access mode of 0. Since it has
an incorrect share access mode, the client later forgets to send
a corresponding close, meaning it can leak stateids on the server.
Fixes: ce4ef7c0a8 ("NFS: Split out NFS v4 file operations")
Cc: stable@vger.kernel.org # 3.6+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b57a10ca1 upstream.
Sometimes the register status can include interrupts that
were masked. We can, for example, get the RF-Kill bit set
in the interrupt status register although this interrupt
was masked. Then if we get the ALIVE interrupt (for example)
that was not masked, we need to *not* service the RF-Kill
interrupt.
Fix this in the MSI-X interrupt handler.
Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ece6031ece upstream.
The GPU regulator enable ramp delay for Jetson TX1 is set to 1ms which
not sufficient because the enable ramp delay has been measured to be
greater than 1ms. Furthermore, the downstream kernels released by NVIDIA
for Jetson TX1 are using a enable ramp delay 2ms and a settling delay of
160us. Update the GPU regulator enable ramp delay for Jetson TX1 to be
2ms and add a settling delay of 160us.
Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: 5e6b9a89af ("arm64: tegra: Add VDD_GPU regulator to Jetson TX1")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16da0eb5ab upstream.
On S2MPS11 device, the buck7 and buck8 regulator voltages start at 750
mV, not 600 mV. Using wrong minimal value caused shifting of these
regulator values by 150 mV (e.g. buck7 usually configured to v1.35 V was
reported as 1.2 V).
On most of the boards these regulators are left in default state so this
was only affecting reported voltage. However if any driver wanted to
change them, then effectively it would set voltage 150 mV higher than
intended.
Cc: <stable@vger.kernel.org>
Fixes: cb74685ecb ("regulator: s2mps11: Add samsung s2mps11 regulator driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a017fd82c upstream.
The GTCO tablet input driver configures itself from an HID report sent
via USB during the initial enumeration process. Some debugging messages
are generated during the parsing. A debugging message indentation
counter is not bounds checked, leading to the ability for a specially
crafted HID report to cause '-' and null bytes be written past the end
of the indentation array. As long as the kernel has CONFIG_DYNAMIC_DEBUG
enabled, this code will not be optimized out. This was discovered
during code review after a previous syzkaller bug was found in this
driver.
Signed-off-by: Grant Hernandez <granthernandez@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7545b6c208 upstream.
Clear the CRYPTO_TFM_REQ_MAY_SLEEP flag when the chacha20poly1305
operation is being continued from an async completion callback, since
sleeping may not be allowed in that context.
This is basically the same bug that was recently fixed in the xts and
lrw templates. But, it's always been broken in chacha20poly1305 too.
This was found using syzkaller in combination with the updated crypto
self-tests which actually test the MAY_SLEEP flag now.
Reproducer:
python -c 'import socket; socket.socket(socket.AF_ALG, 5, 0).bind(
("aead", "rfc7539(cryptd(chacha20-generic),poly1305-generic)"))'
Kernel output:
BUG: sleeping function called from invalid context at include/crypto/algapi.h:426
in_atomic(): 1, irqs_disabled(): 0, pid: 1001, name: kworker/2:2
[...]
CPU: 2 PID: 1001 Comm: kworker/2:2 Not tainted 5.2.0-rc2 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014
Workqueue: crypto cryptd_queue_worker
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x4d/0x6a lib/dump_stack.c:113
___might_sleep kernel/sched/core.c:6138 [inline]
___might_sleep.cold.19+0x8e/0x9f kernel/sched/core.c:6095
crypto_yield include/crypto/algapi.h:426 [inline]
crypto_hash_walk_done+0xd6/0x100 crypto/ahash.c:113
shash_ahash_update+0x41/0x60 crypto/shash.c:251
shash_async_update+0xd/0x10 crypto/shash.c:260
crypto_ahash_update include/crypto/hash.h:539 [inline]
poly_setkey+0xf6/0x130 crypto/chacha20poly1305.c:337
poly_init+0x51/0x60 crypto/chacha20poly1305.c:364
async_done_continue crypto/chacha20poly1305.c:78 [inline]
poly_genkey_done+0x15/0x30 crypto/chacha20poly1305.c:369
cryptd_skcipher_complete+0x29/0x70 crypto/cryptd.c:279
cryptd_skcipher_decrypt+0xcd/0x110 crypto/cryptd.c:339
cryptd_queue_worker+0x70/0xa0 crypto/cryptd.c:184
process_one_work+0x1ed/0x420 kernel/workqueue.c:2269
worker_thread+0x3e/0x3a0 kernel/workqueue.c:2415
kthread+0x11f/0x140 kernel/kthread.c:255
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
Fixes: 71ebc4d1b2 ("crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539")
Cc: <stable@vger.kernel.org> # v4.2+
Cc: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6bd934de1e upstream.
The sha256-ce finup implementation for ARM64 produces wrong digest
for empty input (len=0). Expected: the actual digest, result: initial
value of SHA internal state. The error is in sha256_ce_finup:
for empty data `finalize` will be 1, so the code is relying on
sha2_ce_transform to make the final round. However, in
sha256_base_do_update, the block function will not be called when
len == 0.
Fix it by setting finalize to 0 if data is empty.
Fixes: 03802f6a80 ("crypto: arm64/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer")
Cc: stable@vger.kernel.org
Signed-off-by: Elena Petrova <lenaptr@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d4aaf16de upstream.
The sha1-ce finup implementation for ARM64 produces wrong digest
for empty input (len=0). Expected: da39a3ee..., result: 67452301...
(initial value of SHA internal state). The error is in sha1_ce_finup:
for empty data `finalize` will be 1, so the code is relying on
sha1_ce_transform to make the final round. However, in
sha1_base_do_update, the block function will not be called when
len == 0.
Fix it by setting finalize to 0 if data is empty.
Fixes: 07eb54d306 ("crypto: arm64/sha1-ce - move SHA-1 ARMv8 implementation to base layer")
Cc: stable@vger.kernel.org
Signed-off-by: Elena Petrova <lenaptr@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c6bc4dfa5 upstream.
Changing ghash_mod_init() to be subsys_initcall made it start running
before the alignment fault handler has been installed on ARM. In kernel
builds where the keys in the ghash test vectors happened to be
misaligned in the kernel image, this exposed the longstanding bug that
ghash_setkey() is incorrectly casting the key buffer (which can have any
alignment) to be128 for passing to gf128mul_init_4k_lle().
Fix this by memcpy()ing the key to a temporary buffer.
Don't fix it by setting an alignmask on the algorithm instead because
that would unnecessarily force alignment of the data too.
Fixes: 2cdc6899a8 ("crypto: ghash - Add GHASH digest algorithm for GCM")
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7398cee4c3 upstream.
Some targets introduce delays when handshaking the response to certain
commands. For example, a disk may send a 96-byte response to an INQUIRY
command (or a 24-byte response to a MODE SENSE command) too slowly.
Apparently the first 12 or 14 bytes are handshaked okay but then the system
bus error timeout is reached while transferring the next word.
Since the scsi bus phase hasn't changed, the driver then sets the target
borken flag to prevent further PDMA transfers. The driver also logs the
warning, "switching to slow handshake".
Raise the PDMA threshold to 512 bytes so that PIO transfers will be used
for these commands. This default is sufficiently low that PDMA will still
be used for READ and WRITE commands.
The existing threshold (16 bytes) was chosen more or less at random.
However, best performance requires the threshold to be as low as possible.
Those systems that don't need the PIO workaround at all may benefit from
mac_scsi.setup_use_pdma=1
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: stable@vger.kernel.org # v4.14+
Fixes: 3a0f64bfa9 ("mac_scsi: Fix pseudo DMA implementation")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57f3132651 upstream.
The reselection interrupt gets disabled during selection and must be
re-enabled when hostdata->connected becomes NULL. If it isn't re-enabled a
disconnected command may time-out or the target may wedge the bus while
trying to reselect the host. This can happen after a command is aborted.
Fix this by enabling the reselection interrupt in NCR5380_main() after
calls to NCR5380_select() and NCR5380_information_transfer() return.
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: stable@vger.kernel.org # v4.9+
Fixes: 8b00c3d5d4 ("ncr5380: Implement new eh_abort_handler")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1078e821b upstream.
Instead of trying to allocate pages with GFP_USER in
add_ballooned_pages() check the available free memory via
si_mem_available(). GFP_USER is far less limiting memory exhaustion
than the test via si_mem_available().
This will avoid dom0 running out of memory due to excessive foreign
page mappings especially on ARM and on x86 in PVH mode, as those don't
have a pre-ballooned area which can be used for foreign mappings.
As the normal ballooning suffers from the same problem don't balloon
down more than si_mem_available() pages in one iteration. At the same
time limit the default maximum number of retries.
This is part of XSA-300.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c49a8682fc ]
Problem: The Linux Bluetooth stack yields complete control over the BLE
connection interval to the remote device.
The Linux Bluetooth stack provides access to the BLE connection interval
min and max values through /sys/kernel/debug/bluetooth/hci0/
conn_min_interval and /sys/kernel/debug/bluetooth/hci0/conn_max_interval.
These values are used for initial BLE connections, but the remote device
has the ability to request a connection parameter update. In the event
that the remote side requests to change the connection interval, the Linux
kernel currently only validates that the desired value is within the
acceptable range in the Bluetooth specification (6 - 3200, corresponding to
7.5ms - 4000ms). There is currently no validation that the desired value
requested by the remote device is within the min/max limits specified in
the conn_min_interval/conn_max_interval configurations. This essentially
leads to Linux yielding complete control over the connection interval to
the remote device.
The proposed patch adds a verification step to the connection parameter
update mechanism, ensuring that the desired value is within the min/max
bounds of the current connection. If the desired value is outside of the
current connection min/max values, then the connection parameter update
request is rejected and the negative response is returned to the remote
device. Recall that the initial connection is established using the local
conn_min_interval/conn_max_interval values, so this allows the Linux
administrator to retain control over the BLE connection interval.
The one downside that I see is that the current default Linux values for
conn_min_interval and conn_max_interval typically correspond to 30ms and
50ms respectively. If this change were accepted, then it is feasible that
some devices would no longer be able to negotiate to their desired
connection interval values. This might be remedied by setting the default
Linux conn_min_interval and conn_max_interval values to the widest
supported range (6 - 3200 / 7.5ms - 4000ms). This could lead to the same
behavior as the current implementation, where the remote device could
request to change the connection interval value to any value that is
permitted by the Bluetooth specification, and Linux would accept the
desired value.
Signed-off-by: Carey Sonsino <csonsino@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
