commit 8a224ffb3f upstream.
When module loaded and enabled, we will use __ftrace_replace_code
for module if any ftrace_ops referenced it found. But we will get
wrong ftrace_addr for module rec in ftrace_get_addr_new, because
rec->flags has not been setup correctly. It can cause the callback
function of a ftrace_ops has FTRACE_OPS_FL_SAVE_REGS to be called
with pt_regs set to NULL.
So setup correct FTRACE_FL_REGS flags for rec when we call
referenced_filters to find ftrace_ops references it.
Link: https://lkml.kernel.org/r/20200728180554.65203-1-zhouchengming@bytedance.com
Cc: stable@vger.kernel.org
Fixes: 8c4f3c3fa9 ("ftrace: Check module functions being traced on reload")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6f23d14ec upstream.
When workload runs in cgroups that aren't directly below root cgroup and
their parent specifies reclaim protection, it may end up ineffective.
The reason is that propagate_protected_usage() is not called in all
hierarchy up. All the protected usage is incorrectly accumulated in the
workload's parent. This means that siblings_low_usage is overestimated
and effective protection underestimated. Even though it is transitional
phenomenon (uncharge path does correct propagation and fixes the wrong
children_low_usage), it can undermine the intended protection
unexpectedly.
We have noticed this problem while seeing a swap out in a descendant of a
protected memcg (intermediate node) while the parent was conveniently
under its protection limit and the memory pressure was external to that
hierarchy. Michal has pinpointed this down to the wrong
siblings_low_usage which led to the unwanted reclaim.
The fix is simply updating children_low_usage in respective ancestors also
in the charging path.
Fixes: 230671533d ("mm: memory.low hierarchical behavior")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org> [4.18+]
Link: http://lkml.kernel.org/r/20200803153231.15477-1-mhocko@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 654888327e upstream.
Commit 3451a495ef ("driver core: Establish order of operations for
device_add and device_del via bitflag") sought to prevent asynchronous
driver binding to a device which is being removed. It added a
per-device "dead" flag which is checked in the following code paths:
* asynchronous binding in __driver_attach_async_helper()
* synchronous binding in device_driver_attach()
* asynchronous binding in __device_attach_async_helper()
It did *not* check the flag upon:
* synchronous binding in __device_attach()
However __device_attach() may also be called asynchronously from:
deferred_probe_work_func()
bus_probe_device()
device_initial_probe()
__device_attach()
So if the commit's intention was to check the "dead" flag in all
asynchronous code paths, then a check is also necessary in
__device_attach(). Add the missing check.
Fixes: 3451a495ef ("driver core: Establish order of operations for device_add and device_del via bitflag")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v5.1+
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Link: https://lore.kernel.org/r/de88a23a6fe0ef70f7cfd13c8aea9ab51b4edab6.1594214103.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a14812679 upstream.
offset_to_stripe() returns the stripe number (in type unsigned int) from
an offset (in type uint64_t) by the following calculation,
do_div(offset, d->stripe_size);
For large capacity backing device (e.g. 18TB) with small stripe size
(e.g. 4KB), the result is 4831838208 and exceeds UINT_MAX. The actual
returned value which caller receives is 536870912, due to the overflow.
Indeed in bcache_device_init(), bcache_device->nr_stripes is limited in
range [1, INT_MAX]. Therefore all valid stripe numbers in bcache are
in range [0, bcache_dev->nr_stripes - 1].
This patch adds a upper limition check in offset_to_stripe(): the max
valid stripe number should be less than bcache_device->nr_stripes. If
the calculated stripe number from do_div() is equal to or larger than
bcache_device->nr_stripe, -EINVAL will be returned. (Normally nr_stripes
is less than INT_MAX, exceeding upper limitation doesn't mean overflow,
therefore -EOVERFLOW is not used as error code.)
This patch also changes nr_stripes' type of struct bcache_device from
'unsigned int' to 'int', and return value type of offset_to_stripe()
from 'unsigned int' to 'int', to match their exact data ranges.
All locations where bcache_device->nr_stripes and offset_to_stripe() are
referenced also get updated for the above type change.
Reported-and-tested-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1783075
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fe4886785 upstream.
There are some meta data of bcache are allocated by multiple pages,
and they are used as bio bv_page for I/Os to the cache device. for
example cache_set->uuids, cache->disk_buckets, journal_write->data,
bset_tree->data.
For such meta data memory, all the allocated pages should be treated
as a single memory block. Then the memory management and underlying I/O
code can treat them more clearly.
This patch adds __GFP_COMP flag to all the location allocating >0 order
pages for the above mentioned meta data. Then their pages are treated
as compound pages now.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1c6ae3d9f upstream.
In degraded raid5, we need to read parity to do reconstruct-write when
data disks fail. However, we can not read parity from
handle_stripe_dirtying() in force reconstruct-write mode.
Reproducible Steps:
1. Create degraded raid5
mdadm -C /dev/md2 --assume-clean -l5 -n3 /dev/sda2 /dev/sdb2 missing
2. Set rmw_level to 0
echo 0 > /sys/block/md2/md/rmw_level
3. IO to raid5
Now some io may be stuck in raid5. We can use handle_stripe_fill() to read
the parity in this situation.
Cc: <stable@vger.kernel.org> # v4.4+
Reviewed-by: Alex Wu <alexwu@synology.com>
Reviewed-by: BingJing Chang <bingjingc@synology.com>
Reviewed-by: Danny Shih <dannyshih@synology.com>
Signed-off-by: ChangSyun Peng <allenpeng@synology.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9539752d2 upstream.
Add missed sock updates to compat path via a new helper, which will be
used more in coming patches. (The net/core/scm.c code is left as-is here
to assist with -stable backports for the compat path.)
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 48a87cc26c ("net: netprio: fd passed in SCM_RIGHTS datagram not set correctly")
Fixes: d84295067f ("net: net_cls: fd passed in SCM_RIGHTS datagram not set correctly")
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 592d751c1e upstream.
If we don't have a hardware multicast filter available then instead of
silently failing to listen for the requested ethernet broadcast
addresses fall back to receiving all multicast packets, in a similar
fashion to other drivers with no multicast filter.
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df43dd526e upstream.
The IPQ806x does not appear to have a functional multicast ethernet
address filter. This was observed as a failure to correctly receive IPv6
packets on a LAN to the all stations address. Checking the vendor driver
shows that it does not attempt to enable the multicast filter and
instead falls back to receiving all multicast packets, internally
setting ALLMULTI.
Use the new fallback support in the dwmac1000 driver to correctly
achieve the same with the mainline IPQ806x driver. Confirmed to fix IPv6
functionality on an RB3011 router.
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c83b277ad upstream.
Recently random.h started including percpu.h (see commit
f227e3ec3b ("random32: update the net random state on interrupt and
activity")), which broke corenet64_smp_defconfig:
In file included from /linux/arch/powerpc/include/asm/paca.h:18,
from /linux/arch/powerpc/include/asm/percpu.h:13,
from /linux/include/linux/random.h:14,
from /linux/lib/uuid.c:14:
/linux/arch/powerpc/include/asm/mmu.h:139:22: error: unknown type name 'next_tlbcam_idx'
139 | DECLARE_PER_CPU(int, next_tlbcam_idx);
This is due to a circular header dependency:
asm/mmu.h includes asm/percpu.h, which includes asm/paca.h, which
includes asm/mmu.h
Which means DECLARE_PER_CPU() isn't defined when mmu.h needs it.
We can fix it by moving the include of paca.h below the include of
asm-generic/percpu.h.
This moves the include of paca.h out of the #ifdef __powerpc64__, but
that is OK because paca.h is almost entirely inside #ifdef
CONFIG_PPC64 anyway.
It also moves the include of paca.h out of the #ifdef CONFIG_SMP,
which could possibly break something, but seems to have no ill
effects.
Fixes: f227e3ec3b ("random32: update the net random state on interrupt and activity")
Cc: stable@vger.kernel.org # v5.8
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804130558.292328-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63dee5df43 upstream.
We have powerpc specific logic in our page fault handling to decide if
an access to an unmapped address below the stack pointer should expand
the stack VMA.
The code was originally added in 2004 "ported from 2.4". The rough
logic is that the stack is allowed to grow to 1MB with no extra
checking. Over 1MB the access must be within 2048 bytes of the stack
pointer, or be from a user instruction that updates the stack pointer.
The 2048 byte allowance below the stack pointer is there to cover the
288 byte "red zone" as well as the "about 1.5kB" needed by the signal
delivery code.
Unfortunately since then the signal frame has expanded, and is now
4224 bytes on 64-bit kernels with transactional memory enabled. This
means if a process has consumed more than 1MB of stack, and its stack
pointer lies less than 4224 bytes from the next page boundary, signal
delivery will fault when trying to expand the stack and the process
will see a SEGV.
The total size of the signal frame is the size of struct rt_sigframe
(which includes the red zone) plus __SIGNAL_FRAMESIZE (128 bytes on
64-bit).
The 2048 byte allowance was correct until 2008 as the signal frame
was:
struct rt_sigframe {
struct ucontext uc; /* 0 1440 */
/* --- cacheline 11 boundary (1408 bytes) was 32 bytes ago --- */
long unsigned int _unused[2]; /* 1440 16 */
unsigned int tramp[6]; /* 1456 24 */
struct siginfo * pinfo; /* 1480 8 */
void * puc; /* 1488 8 */
struct siginfo info; /* 1496 128 */
/* --- cacheline 12 boundary (1536 bytes) was 88 bytes ago --- */
char abigap[288]; /* 1624 288 */
/* size: 1920, cachelines: 15, members: 7 */
/* padding: 8 */
};
1920 + 128 = 2048
Then in commit ce48b21007 ("powerpc: Add VSX context save/restore,
ptrace and signal support") (Jul 2008) the signal frame expanded to
2304 bytes:
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */ <--
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
long unsigned int _unused[2]; /* 1696 16 */
unsigned int tramp[6]; /* 1712 24 */
struct siginfo * pinfo; /* 1736 8 */
void * puc; /* 1744 8 */
struct siginfo info; /* 1752 128 */
/* --- cacheline 14 boundary (1792 bytes) was 88 bytes ago --- */
char abigap[288]; /* 1880 288 */
/* size: 2176, cachelines: 17, members: 7 */
/* padding: 8 */
};
2176 + 128 = 2304
At this point we should have been exposed to the bug, though as far as
I know it was never reported. I no longer have a system old enough to
easily test on.
Then in 2010 commit 320b2b8de1 ("mm: keep a guard page below a
grow-down stack segment") caused our stack expansion code to never
trigger, as there was always a VMA found for a write up to PAGE_SIZE
below r1.
That meant the bug was hidden as we continued to expand the signal
frame in commit 2b0a576d15 ("powerpc: Add new transactional memory
state to the signal context") (Feb 2013):
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
struct ucontext uc_transact; /* 1696 1696 */ <--
/* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
long unsigned int _unused[2]; /* 3392 16 */
unsigned int tramp[6]; /* 3408 24 */
struct siginfo * pinfo; /* 3432 8 */
void * puc; /* 3440 8 */
struct siginfo info; /* 3448 128 */
/* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
char abigap[288]; /* 3576 288 */
/* size: 3872, cachelines: 31, members: 8 */
/* padding: 8 */
/* last cacheline: 32 bytes */
};
3872 + 128 = 4000
And commit 573ebfa660 ("powerpc: Increase stack redzone for 64-bit
userspace to 512 bytes") (Feb 2014):
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
struct ucontext uc_transact; /* 1696 1696 */
/* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
long unsigned int _unused[2]; /* 3392 16 */
unsigned int tramp[6]; /* 3408 24 */
struct siginfo * pinfo; /* 3432 8 */
void * puc; /* 3440 8 */
struct siginfo info; /* 3448 128 */
/* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
char abigap[512]; /* 3576 512 */ <--
/* size: 4096, cachelines: 32, members: 8 */
/* padding: 8 */
};
4096 + 128 = 4224
Then finally in 2017, commit 1be7107fbe ("mm: larger stack guard
gap, between vmas") exposed us to the existing bug, because it changed
the stack VMA to be the correct/real size, meaning our stack expansion
code is now triggered.
Fix it by increasing the allowance to 4224 bytes.
Hard-coding 4224 is obviously unsafe against future expansions of the
signal frame in the same way as the existing code. We can't easily use
sizeof() because the signal frame structure is not in a header. We
will either fix that, or rip out all the custom stack expansion
checking logic entirely.
Fixes: ce48b21007 ("powerpc: Add VSX context save/restore, ptrace and signal support")
Cc: stable@vger.kernel.org # v2.6.27+
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724092528.1578671-2-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d65d3769d upstream.
Fix the following build error in configurations with
CONFIG_XTENSA_VARIANT_HAVE_PERF_EVENTS=y:
arch/xtensa/kernel/perf_event.c:420:29: error: passing argument 3 of
‘cpuhp_setup_state’ from incompatible pointer type
Cc: stable@vger.kernel.org
Fixes: 25a77b55e7 ("xtensa/perf: Convert the hotplug notifier to state machine callbacks")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 65afb0932a upstream.
There are 2 exit paths where the lock isn't held, but try to unlock the
mutex when exiting. In these places we should just return from the
function.
A neater approach would be to cleanup the ad5592r_read_raw(), but that
would make this patch more difficult to backport to stable versions.
Fixes 56ca9db862: ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs")
Reported-by: Charles Stanhope <charles.stanhope@gmail.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f26433e9b upstream.
While logging an inode, at copy_items(), if we fail to lookup the checksums
for an extent we release the destination path, free the ins_data array and
then return immediately. However a previous iteration of the for loop may
have added checksums to the ordered_sums list, in which case we leak the
memory used by them.
So fix this by making sure we iterate the ordered_sums list and free all
its checksums before returning.
Fixes: 3650860b90 ("Btrfs: remove almost all of the BUG()'s from tree-log.c")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf53d4687b upstream.
In try_to_merge_free_space we attempt to find entries to the left and
right of the entry we are adding to see if they can be merged. We
search for an entry past our current info (saved into right_info), and
then if right_info exists and it has a rb_prev() we save the rb_prev()
into left_info.
However there's a slight problem in the case that we have a right_info,
but no entry previous to that entry. At that point we will search for
an entry just before the info we're attempting to insert. This will
simply find right_info again, and assign it to left_info, making them
both the same pointer.
Now if right_info _can_ be merged with the range we're inserting, we'll
add it to the info and free right_info. However further down we'll
access left_info, which was right_info, and thus get a use-after-free.
Fix this by only searching for the left entry if we don't find a right
entry at all.
The CVE referenced had a specially crafted file system that could
trigger this use-after-free. However with the tree checker improvements
we no longer trigger the conditions for the UAF. But the original
conditions still apply, hence this fix.
Reference: CVE-2019-19448
Fixes: 9630308170 ("Btrfs: use hybrid extents+bitmap rb tree for free space")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27942c9971 upstream.
Reported by Forza on IRC that remounting with compression options does
not reflect the change in level, or at least it does not appear to do so
according to the messages:
mount -o compress=zstd:1 /dev/sda /mnt
mount -o remount,compress=zstd:15 /mnt
does not print the change to the level to syslog:
[ 41.366060] BTRFS info (device vda): use zstd compression, level 1
[ 41.368254] BTRFS info (device vda): disk space caching is enabled
[ 41.390429] BTRFS info (device vda): disk space caching is enabled
What really happens is that the message is lost but the level is actualy
changed.
There's another weird output, if compression is reset to 'no':
[ 45.413776] BTRFS info (device vda): use no compression, level 4
To fix that, save the previous compression level and print the message
in that case too and use separate message for 'no' compression.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18c850fdc5 upstream.
There's long existed a lockdep splat because we open our bdev's under
the ->device_list_mutex at mount time, which acquires the bd_mutex.
Usually this goes unnoticed, but if you do loopback devices at all
suddenly the bd_mutex comes with a whole host of other dependencies,
which results in the splat when you mount a btrfs file system.
======================================================
WARNING: possible circular locking dependency detected
5.8.0-0.rc3.1.fc33.x86_64+debug #1 Not tainted
------------------------------------------------------
systemd-journal/509 is trying to acquire lock:
ffff970831f84db0 (&fs_info->reloc_mutex){+.+.}-{3:3}, at: btrfs_record_root_in_trans+0x44/0x70 [btrfs]
but task is already holding lock:
ffff97083144d598 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x59/0x560 [btrfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #6 (sb_pagefaults){.+.+}-{0:0}:
__sb_start_write+0x13e/0x220
btrfs_page_mkwrite+0x59/0x560 [btrfs]
do_page_mkwrite+0x4f/0x130
do_wp_page+0x3b0/0x4f0
handle_mm_fault+0xf47/0x1850
do_user_addr_fault+0x1fc/0x4b0
exc_page_fault+0x88/0x300
asm_exc_page_fault+0x1e/0x30
-> #5 (&mm->mmap_lock#2){++++}-{3:3}:
__might_fault+0x60/0x80
_copy_from_user+0x20/0xb0
get_sg_io_hdr+0x9a/0xb0
scsi_cmd_ioctl+0x1ea/0x2f0
cdrom_ioctl+0x3c/0x12b4
sr_block_ioctl+0xa4/0xd0
block_ioctl+0x3f/0x50
ksys_ioctl+0x82/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #4 (&cd->lock){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
sr_block_open+0xa2/0x180
__blkdev_get+0xdd/0x550
blkdev_get+0x38/0x150
do_dentry_open+0x16b/0x3e0
path_openat+0x3c9/0xa00
do_filp_open+0x75/0x100
do_sys_openat2+0x8a/0x140
__x64_sys_openat+0x46/0x70
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #3 (&bdev->bd_mutex){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
__blkdev_get+0x6a/0x550
blkdev_get+0x85/0x150
blkdev_get_by_path+0x2c/0x70
btrfs_get_bdev_and_sb+0x1b/0xb0 [btrfs]
open_fs_devices+0x88/0x240 [btrfs]
btrfs_open_devices+0x92/0xa0 [btrfs]
btrfs_mount_root+0x250/0x490 [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
vfs_kern_mount.part.0+0x71/0xb0
btrfs_mount+0x119/0x380 [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
do_mount+0x8c6/0xca0
__x64_sys_mount+0x8e/0xd0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #2 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
btrfs_run_dev_stats+0x36/0x420 [btrfs]
commit_cowonly_roots+0x91/0x2d0 [btrfs]
btrfs_commit_transaction+0x4e6/0x9f0 [btrfs]
btrfs_sync_file+0x38a/0x480 [btrfs]
__x64_sys_fdatasync+0x47/0x80
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (&fs_info->tree_log_mutex){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
btrfs_commit_transaction+0x48e/0x9f0 [btrfs]
btrfs_sync_file+0x38a/0x480 [btrfs]
__x64_sys_fdatasync+0x47/0x80
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&fs_info->reloc_mutex){+.+.}-{3:3}:
__lock_acquire+0x1241/0x20c0
lock_acquire+0xb0/0x400
__mutex_lock+0x7b/0x820
btrfs_record_root_in_trans+0x44/0x70 [btrfs]
start_transaction+0xd2/0x500 [btrfs]
btrfs_dirty_inode+0x44/0xd0 [btrfs]
file_update_time+0xc6/0x120
btrfs_page_mkwrite+0xda/0x560 [btrfs]
do_page_mkwrite+0x4f/0x130
do_wp_page+0x3b0/0x4f0
handle_mm_fault+0xf47/0x1850
do_user_addr_fault+0x1fc/0x4b0
exc_page_fault+0x88/0x300
asm_exc_page_fault+0x1e/0x30
other info that might help us debug this:
Chain exists of:
&fs_info->reloc_mutex --> &mm->mmap_lock#2 --> sb_pagefaults
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sb_pagefaults);
lock(&mm->mmap_lock#2);
lock(sb_pagefaults);
lock(&fs_info->reloc_mutex);
*** DEADLOCK ***
3 locks held by systemd-journal/509:
#0: ffff97083bdec8b8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x12e/0x4b0
#1: ffff97083144d598 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x59/0x560 [btrfs]
#2: ffff97083144d6a8 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x3f8/0x500 [btrfs]
stack backtrace:
CPU: 0 PID: 509 Comm: systemd-journal Not tainted 5.8.0-0.rc3.1.fc33.x86_64+debug #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
dump_stack+0x92/0xc8
check_noncircular+0x134/0x150
__lock_acquire+0x1241/0x20c0
lock_acquire+0xb0/0x400
? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
? lock_acquire+0xb0/0x400
? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
__mutex_lock+0x7b/0x820
? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
? kvm_sched_clock_read+0x14/0x30
? sched_clock+0x5/0x10
? sched_clock_cpu+0xc/0xb0
btrfs_record_root_in_trans+0x44/0x70 [btrfs]
start_transaction+0xd2/0x500 [btrfs]
btrfs_dirty_inode+0x44/0xd0 [btrfs]
file_update_time+0xc6/0x120
btrfs_page_mkwrite+0xda/0x560 [btrfs]
? sched_clock+0x5/0x10
do_page_mkwrite+0x4f/0x130
do_wp_page+0x3b0/0x4f0
handle_mm_fault+0xf47/0x1850
do_user_addr_fault+0x1fc/0x4b0
exc_page_fault+0x88/0x300
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x7fa3972fdbfe
Code: Bad RIP value.
Fix this by not holding the ->device_list_mutex at this point. The
device_list_mutex exists to protect us from modifying the device list
while the file system is running.
However it can also be modified by doing a scan on a device. But this
action is specifically protected by the uuid_mutex, which we are holding
here. We cannot race with opening at this point because we have the
->s_mount lock held during the mount. Not having the
->device_list_mutex here is perfectly safe as we're not going to change
the devices at this point.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add some comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4faf55b038 upstream.
->show_devname currently shows the lowest devid in the list. As the seed
devices have the lowest devid in the sprouted filesystem, the userland
tool such as findmnt end up seeing seed device instead of the device from
the read-writable sprouted filesystem. As shown below.
mount /dev/sda /btrfs
mount: /btrfs: WARNING: device write-protected, mounted read-only.
findmnt --output SOURCE,TARGET,UUID /btrfs
SOURCE TARGET UUID
/dev/sda /btrfs 899f7027-3e46-4626-93e7-7d4c9ad19111
btrfs dev add -f /dev/sdb /btrfs
umount /btrfs
mount /dev/sdb /btrfs
findmnt --output SOURCE,TARGET,UUID /btrfs
SOURCE TARGET UUID
/dev/sda /btrfs 899f7027-3e46-4626-93e7-7d4c9ad19111
All sprouts from a single seed will show the same seed device and the
same fsid. That's confusing.
This is causing problems in our prototype as there isn't any reference
to the sprout file-system(s) which is being used for actual read and
write.
This was added in the patch which implemented the show_devname in btrfs
commit 9c5085c147 ("Btrfs: implement ->show_devname").
I tried to look for any particular reason that we need to show the seed
device, there isn't any.
So instead, do not traverse through the seed devices, just show the
lowest devid in the sprouted fsid.
After the patch:
mount /dev/sda /btrfs
mount: /btrfs: WARNING: device write-protected, mounted read-only.
findmnt --output SOURCE,TARGET,UUID /btrfs
SOURCE TARGET UUID
/dev/sda /btrfs 899f7027-3e46-4626-93e7-7d4c9ad19111
btrfs dev add -f /dev/sdb /btrfs
mount -o rw,remount /dev/sdb /btrfs
findmnt --output SOURCE,TARGET,UUID /btrfs
SOURCE TARGET UUID
/dev/sdb /btrfs 595ca0e6-b82e-46b5-b9e2-c72a6928be48
mount /dev/sda /btrfs1
mount: /btrfs1: WARNING: device write-protected, mounted read-only.
btrfs dev add -f /dev/sdc /btrfs1
findmnt --output SOURCE,TARGET,UUID /btrfs1
SOURCE TARGET UUID
/dev/sdc /btrfs1 ca1dbb7a-8446-4f95-853c-a20f3f82bdbb
cat /proc/self/mounts | grep btrfs
/dev/sdb /btrfs btrfs rw,relatime,noacl,space_cache,subvolid=5,subvol=/ 0 0
/dev/sdc /btrfs1 btrfs ro,relatime,noacl,space_cache,subvolid=5,subvol=/ 0 0
Reported-by: Martin K. Petersen <martin.petersen@oracle.com>
CC: stable@vger.kernel.org # 4.19+
Tested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d60ba8de11 upstream.
clang static analysis flags this error
fs/btrfs/ref-verify.c:290:3: warning: Potential leak of memory pointed to by 're' [unix.Malloc]
kfree(be);
^~~~~
The problem is in this block of code:
if (root_objectid) {
struct root_entry *exist_re;
exist_re = insert_root_entry(&exist->roots, re);
if (exist_re)
kfree(re);
}
There is no 'else' block freeing when root_objectid is 0. Add the
missing kfree to the else branch.
Fixes: fd708b81d9 ("Btrfs: add a extent ref verify tool")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 851fd730a7 upstream.
[BUG]
When a lot of subvolumes are created, there is a user report about
transaction aborted:
BTRFS: Transaction aborted (error -24)
WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs]
RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs]
Call Trace:
create_pending_snapshots+0x82/0xa0 [btrfs]
btrfs_commit_transaction+0x275/0x8c0 [btrfs]
btrfs_mksubvol+0x4b9/0x500 [btrfs]
btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
btrfs_ioctl+0x11a4/0x2da0 [btrfs]
do_vfs_ioctl+0xa9/0x640
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x5a/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace 33f2f83f3d5250e9 ]---
BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown
BTRFS info (device sda1): forced readonly
BTRFS warning (device sda1): Skipping commit of aborted transaction.
BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown
[CAUSE]
The error is EMFILE (Too many files open) and comes from the anonymous
block device allocation. The ids are in a shared pool of size 1<<20.
The ids are assigned to live subvolumes, ie. the root structure exists
in memory (eg. after creation or after the root appears in some path).
The pool could be exhausted if the numbers are not reclaimed fast
enough, after subvolume deletion or if other system component uses the
anon block devices.
[WORKAROUND]
Since it's not possible to completely solve the problem, we can only
minimize the time the id is allocated to a subvolume root.
Firstly, we can reduce the use of anon_dev by trees that are not
subvolume roots, like data reloc tree.
This patch will do extra check on root objectid, to skip roots that
don't need anon_dev. Currently it's only data reloc tree and orphan
roots.
Reported-by: Greed Rong <greedrong@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+UqX+NTrZ6boGnWHhSeZmEY5J76CTqmYjO2S+=tHJX7nb9DPw@mail.gmail.com/
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 082b6c970f upstream.
[BUG]
When a lot of subvolumes are created, there is a user report about
transaction aborted caused by slow anonymous block device reclaim:
BTRFS: Transaction aborted (error -24)
WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs]
RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs]
Call Trace:
create_pending_snapshots+0x82/0xa0 [btrfs]
btrfs_commit_transaction+0x275/0x8c0 [btrfs]
btrfs_mksubvol+0x4b9/0x500 [btrfs]
btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
btrfs_ioctl+0x11a4/0x2da0 [btrfs]
do_vfs_ioctl+0xa9/0x640
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x5a/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace 33f2f83f3d5250e9 ]---
BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown
BTRFS info (device sda1): forced readonly
BTRFS warning (device sda1): Skipping commit of aborted transaction.
BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown
[CAUSE]
The anonymous device pool is shared and its size is 1M. It's possible to
hit that limit if the subvolume deletion is not fast enough and the
subvolumes to be cleaned keep the ids allocated.
[WORKAROUND]
We can't avoid the anon device pool exhaustion but we can shorten the
time the id is attached to the subvolume root once the subvolume becomes
invisible to the user.
Reported-by: Greed Rong <greedrong@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+UqX+NTrZ6boGnWHhSeZmEY5J76CTqmYjO2S+=tHJX7nb9DPw@mail.gmail.com/
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dae68d7fd4 upstream.
If context is not NULL in acpiphp_grab_context(), but the
is_going_away flag is set for the device's parent, the reference
counter of the context needs to be decremented before returning
NULL or the context will never be freed, so make that happen.
Fixes: edf5bf34d4 ("ACPI / dock: Use callback pointers from devices' ACPI hotplug contexts")
Reported-by: Vasily Averin <vvs@virtuozzo.com>
Cc: 3.15+ <stable@vger.kernel.org> # 3.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0c7baca18 upstream.
John reported that on a RK3288 system the perf per CPU interrupts are all
affine to CPU0 and provided the analysis:
"It looks like what happens is that because the interrupts are not per-CPU
in the hardware, armpmu_request_irq() calls irq_force_affinity() while
the interrupt is deactivated and then request_irq() with IRQF_PERCPU |
IRQF_NOBALANCING.
Now when irq_startup() runs with IRQ_STARTUP_NORMAL, it calls
irq_setup_affinity() which returns early because IRQF_PERCPU and
IRQF_NOBALANCING are set, leaving the interrupt on its original CPU."
This was broken by the recent commit which blocked interrupt affinity
setting in hardware before activation of the interrupt. While this works in
general, it does not work for this particular case. As contrary to the
initial analysis not all interrupt chip drivers implement an activate
callback, the safe cure is to make the deferred interrupt affinity setting
at activation time opt-in.
Implement the necessary core logic and make the two irqchip implementations
for which this is required opt-in. In hindsight this would have been the
right thing to do, but ...
Fixes: baedb87d1b ("genirq/affinity: Handle affinity setting on inactive interrupts correctly")
Reported-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/87blk4tzgm.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a018944ee upstream.
When mounting with Kerberos, users have been confused about the
default error returned in scenarios in which either keyutils is
not installed or the user did not properly acquire a krb5 ticket.
Log a warning message in the case that "ENOKEY" is returned
from the get_spnego_key upcall so that users can better understand
why mount failed in those two cases.
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec0160891e upstream.
Commit 711419e504 ("irqdomain: Add the missing assignment of
domain->fwnode for named fwnode") unintentionally caused a dangling pointer
page fault issue on firmware nodes that were freed after IRQ domain
allocation. Commit e3beca48a4 fixed that dangling pointer issue by only
freeing the firmware node after an IRQ domain allocation failure. That fix
no longer frees the firmware node immediately, but leaves the firmware node
allocated after the domain is removed.
The firmware node must be kept around through irq_domain_remove, but should be
freed it afterwards.
Add the missing free operations after domain removal where where appropriate.
Fixes: e3beca48a4 ("irqdomain/treewide: Keep firmware node unconditionally allocated")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1595363169-7157-1-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b24993c21 upstream.
When using kexec the SBA IOMMU IBASE might still have the RE
bit set. This triggers a WARN_ON when trying to write back the
IBASE register later, and it also makes some mask calculations fail.
Cc: <stable@vger.kernel.org>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e96ebd589d upstream.
This patch implements the __smp_store_release and __smp_load_acquire barriers
using ordered stores and loads. This avoids the sync instruction present in
the generic implementation.
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Dave Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa9e862d7d upstream.
Simply copying all xfers from userspace into one bounce buffer causes
alignment problems if the SPI controller uses DMA.
Ensure that all transfer data blocks within the rx and tx bounce buffers
are aligned for DMA (according to ARCH_KMALLOC_MINALIGN).
Alignment may increase the usage of the bounce buffers. In some cases,
the buffers may need to be increased using the "bufsiz" module
parameter.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200728100832.24788-1-ceggers@arri.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10470dec3d upstream.
Commit 0c868627e6 (cpufreq: dt: Allow platform specific
intermediate callbacks) added two function pointers to the
struct cpufreq_dt_platform_data. However, armada37xx_cpufreq_driver_init()
has this struct (pdata) located on the stack and uses only "suspend"
and "resume" fields. So these newly added "get_intermediate" and
"target_intermediate" pointers are uninitialized and contain arbitrary
non-null values, causing all kinds of trouble.
For instance, here is an oops on espressobin after an attempt to change
the cpefreq governor:
[ 29.174554] Unable to handle kernel execute from non-executable memory at virtual address ffff00003f87bdc0
...
[ 29.269373] pc : 0xffff00003f87bdc0
[ 29.272957] lr : __cpufreq_driver_target+0x138/0x580
...
Fixed by zeroing out pdata before use.
Cc: <stable@vger.kernel.org> # v5.7+
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d474f96104 upstream.
If the NFS_LAYOUT_RETURN_REQUESTED flag is set, we want to return the
layout as soon as possible, meaning that the affected layout segments
should be marked as invalid, and should no longer be in use for I/O.
Fixes: f0b429819b ("pNFS: Ignore non-recalled layouts in pnfs_layout_need_return()")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
