Fix missing or extra function parameter kernel-doc warnings
in cgroup.c:
kernel/bpf/cgroup.c:1359: warning: Excess function parameter 'type' description in '__cgroup_bpf_run_filter_skb'
kernel/bpf/cgroup.c:1359: warning: Function parameter or member 'atype' not described in '__cgroup_bpf_run_filter_skb'
kernel/bpf/cgroup.c:1439: warning: Excess function parameter 'type' description in '__cgroup_bpf_run_filter_sk'
kernel/bpf/cgroup.c:1439: warning: Function parameter or member 'atype' not described in '__cgroup_bpf_run_filter_sk'
kernel/bpf/cgroup.c:1467: warning: Excess function parameter 'type' description in '__cgroup_bpf_run_filter_sock_addr'
kernel/bpf/cgroup.c:1467: warning: Function parameter or member 'atype' not described in '__cgroup_bpf_run_filter_sock_addr'
kernel/bpf/cgroup.c:1512: warning: Excess function parameter 'type' description in '__cgroup_bpf_run_filter_sock_ops'
kernel/bpf/cgroup.c:1512: warning: Function parameter or member 'atype' not described in '__cgroup_bpf_run_filter_sock_ops'
kernel/bpf/cgroup.c:1685: warning: Excess function parameter 'type' description in '__cgroup_bpf_run_filter_sysctl'
kernel/bpf/cgroup.c:1685: warning: Function parameter or member 'atype' not described in '__cgroup_bpf_run_filter_sysctl'
kernel/bpf/cgroup.c:795: warning: Excess function parameter 'type' description in '__cgroup_bpf_replace'
kernel/bpf/cgroup.c:795: warning: Function parameter or member 'new_prog' not described in '__cgroup_bpf_replace'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf@vger.kernel.org
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230912060812.1715-1-rdunlap@infradead.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 1d56ade032 changed the function get_unpriv_disabled() to
return its results as a bool instead of updating a global variable, but
test_verifier was not updated to keep in line with these changes. Thus
unpriv_disabled is always false in test_verifier and unprivileged tests
are not properly skipped on systems with unprivileged bpf disabled.
Fixes: 1d56ade032 ("selftests/bpf: Unprivileged tests for test_loader.c")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230912120631.213139-1-asavkov@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Eduard Zingerman says:
====================
For a device bound BPF program with flag BPF_F_XDP_DEV_BOUND_ONLY,
in case if device does not support offload, __bpf_prog_dev_bound_init()
creates a dummy bpf_offload_netdev struct with .offdev field set to NULL.
This dummy struct might be reused for programs without this flag
bound to the same device. However, bpf_prog_offload_verifier_prep()
that uses bpf_offload_netdev assumes that .offdev field cannot be NULL.
This bug was reported by syzbot in [1].
[1] https://lore.kernel.org/bpf/000000000000d97f3c060479c4f8@google.com/
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Fix for a bug observable under the following sequence of events:
1. Create a network device that does not support XDP offload.
2. Load a device bound XDP program with BPF_F_XDP_DEV_BOUND_ONLY flag
(such programs are not offloaded).
3. Load a device bound XDP program with zero flags
(such programs are offloaded).
At step (2) __bpf_prog_dev_bound_init() associates with device (1)
a dummy bpf_offload_netdev struct with .offdev field set to NULL.
At step (3) __bpf_prog_dev_bound_init() would reuse dummy struct
allocated at step (2).
However, downstream usage of the bpf_offload_netdev assumes that
.offdev field can't be NULL, e.g. in bpf_prog_offload_verifier_prep().
Adjust __bpf_prog_dev_bound_init() to require bpf_offload_netdev
with non-NULL .offdev for offloaded BPF programs.
Fixes: 2b3486bc2d ("bpf: Introduce device-bound XDP programs")
Reported-by: syzbot+291100dcb32190ec02a8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/000000000000d97f3c060479c4f8@google.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230912005539.2248244-2-eddyz87@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Sysbot discovered that the queue and stack maps can deadlock if they are
being used from a BPF program that can be called from NMI context (such as
one that is attached to a perf HW counter event). To fix this, add an
in_nmi() check and use raw_spin_trylock() in NMI context, erroring out if
grabbing the lock fails.
Fixes: f1a2e44a3a ("bpf: add queue and stack maps")
Reported-by: Hsin-Wei Hung <hsinweih@uci.edu>
Tested-by: Hsin-Wei Hung <hsinweih@uci.edu>
Co-developed-by: Hsin-Wei Hung <hsinweih@uci.edu>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230911132815.717240-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 151e887d8f ("veth: Fixing transmit return status for dropped
packets") exposed the fact that bpf_clone_redirect is capable of
returning raw NET_XMIT_XXX return codes.
This is in the conflict with its UAPI doc which says the following:
"0 on success, or a negative error in case of failure."
Update the UAPI to reflect the fact that bpf_clone_redirect can
return positive error numbers, but don't explicitly define
their meaning.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com
Hou Tao says:
====================
Fix the unmatched unit_size of bpf_mem_cache
From: Hou Tao <houtao1@huawei.com>
Hi,
The patchset aims to fix the reported warning [0] when the unit_size of
bpf_mem_cache is mismatched with the object size of underly slab-cache.
Patch #1 fixes the warning by adjusting size_index according to the
value of KMALLOC_MIN_SIZE, so bpf_mem_cache with unit_size which is
smaller than KMALLOC_MIN_SIZE or is not aligned with KMALLOC_MIN_SIZE
will be redirected to bpf_mem_cache with bigger unit_size. Patch #2
doesn't do prefill for these redirected bpf_mem_cache to save memory.
Patch #3 adds further error check in bpf_mem_alloc_init() to ensure the
unit_size and object_size are always matched and to prevent potential
issues due to the mismatch.
Please see individual patches for more details. And comments are always
welcome.
[0]: https://lore.kernel.org/bpf/87jztjmmy4.fsf@all.your.base.are.belong.to.us
====================
Link: https://lore.kernel.org/r/20230908133923.2675053-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test to test all possible and valid allocation size for bpf
memory allocator. For each possible allocation size, the test uses
the following two steps to test the alloc and free path:
1) allocate N (N > high_watermark) objects to trigger the refill
executed in irq_work.
2) free N objects to trigger the freeing executed in irq_work.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230908133923.2675053-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add extra check in bpf_mem_alloc_init() to ensure the unit_size of
bpf_mem_cache is matched with the object_size of underlying slab cache.
If these two sizes are unmatched, print a warning once and return
-EINVAL in bpf_mem_alloc_init(), so the mismatch can be found early and
the potential issue can be prevented.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230908133923.2675053-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When the unit_size of a bpf_mem_cache is unmatched with the object_size
of the underlying slab cache, the bpf_mem_cache will not be used, and
the allocation will be redirected to a bpf_mem_cache with a bigger
unit_size instead, so there is no need to prefill for these
unused bpf_mem_caches.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230908133923.2675053-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The following warning was reported when running "./test_progs -a
link_api -a linked_list" on a RISC-V QEMU VM:
------------[ cut here ]------------
WARNING: CPU: 3 PID: 261 at kernel/bpf/memalloc.c:342 bpf_mem_refill
Modules linked in: bpf_testmod(OE)
CPU: 3 PID: 261 Comm: test_progs- ... 6.5.0-rc5-01743-gdcb152bb8328 #2
Hardware name: riscv-virtio,qemu (DT)
epc : bpf_mem_refill+0x1fc/0x206
ra : irq_work_single+0x68/0x70
epc : ffffffff801b1bc4 ra : ffffffff8015fe84 sp : ff2000000001be20
gp : ffffffff82d26138 tp : ff6000008477a800 t0 : 0000000000046600
t1 : ffffffff812b6ddc t2 : 0000000000000000 s0 : ff2000000001be70
s1 : ff5ffffffffe8998 a0 : ff5ffffffffe8998 a1 : ff600003fef4b000
a2 : 000000000000003f a3 : ffffffff80008250 a4 : 0000000000000060
a5 : 0000000000000080 a6 : 0000000000000000 a7 : 0000000000735049
s2 : ff5ffffffffe8998 s3 : 0000000000000022 s4 : 0000000000001000
s5 : 0000000000000007 s6 : ff5ffffffffe8570 s7 : ffffffff82d6bd30
s8 : 000000000000003f s9 : ffffffff82d2c5e8 s10: 000000000000ffff
s11: ffffffff82d2c5d8 t3 : ffffffff81ea8f28 t4 : 0000000000000000
t5 : ff6000008fd28278 t6 : 0000000000040000
[<ffffffff801b1bc4>] bpf_mem_refill+0x1fc/0x206
[<ffffffff8015fe84>] irq_work_single+0x68/0x70
[<ffffffff8015feb4>] irq_work_run_list+0x28/0x36
[<ffffffff8015fefa>] irq_work_run+0x38/0x66
[<ffffffff8000828a>] handle_IPI+0x3a/0xb4
[<ffffffff800a5c3a>] handle_percpu_devid_irq+0xa4/0x1f8
[<ffffffff8009fafa>] generic_handle_domain_irq+0x28/0x36
[<ffffffff800ae570>] ipi_mux_process+0xac/0xfa
[<ffffffff8000a8ea>] sbi_ipi_handle+0x2e/0x88
[<ffffffff8009fafa>] generic_handle_domain_irq+0x28/0x36
[<ffffffff807ee70e>] riscv_intc_irq+0x36/0x4e
[<ffffffff812b5d3a>] handle_riscv_irq+0x54/0x86
[<ffffffff812b6904>] do_irq+0x66/0x98
---[ end trace 0000000000000000 ]---
The warning is due to WARN_ON_ONCE(tgt->unit_size != c->unit_size) in
free_bulk(). The direct reason is that a object is allocated and
freed by bpf_mem_caches with different unit_size.
The root cause is that KMALLOC_MIN_SIZE is 64 and there is no 96-bytes
slab cache in the specific VM. When linked_list test allocates a
72-bytes object through bpf_obj_new(), bpf_global_ma will allocate it
from a bpf_mem_cache with 96-bytes unit_size, but this bpf_mem_cache is
backed by 128-bytes slab cache. When the object is freed, bpf_mem_free()
uses ksize() to choose the corresponding bpf_mem_cache. Because the
object is allocated from 128-bytes slab cache, ksize() returns 128,
bpf_mem_free() chooses a 128-bytes bpf_mem_cache to free the object and
triggers the warning.
A similar warning will also be reported when using CONFIG_SLAB instead
of CONFIG_SLUB in a x86-64 kernel. Because CONFIG_SLUB defines
KMALLOC_MIN_SIZE as 8 but CONFIG_SLAB defines KMALLOC_MIN_SIZE as 32.
An alternative fix is to use kmalloc_size_round() in bpf_mem_alloc() to
choose a bpf_mem_cache which has the same unit_size with the backing
slab cache, but it may introduce performance degradation, so fix the
warning by adjusting the indexes in size_index according to the value of
KMALLOC_MIN_SIZE just like setup_kmalloc_cache_index_table() does.
Fixes: 822fb26bdb ("bpf: Add a hint to allocated objects.")
Reported-by: Björn Töpel <bjorn@kernel.org>
Closes: https://lore.kernel.org/bpf/87jztjmmy4.fsf@all.your.base.are.belong.to.us
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230908133923.2675053-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
I got the below warning when do fuzzing test:
unregister_netdevice: waiting for bond0 to become free. Usage count = 2
It can be repoduced via:
ip link add bond0 type bond
sysctl -w net.ipv4.conf.bond0.promote_secondaries=1
ip addr add 4.117.174.103/0 scope 0x40 dev bond0
ip addr add 192.168.100.111/255.255.255.254 scope 0 dev bond0
ip addr add 0.0.0.4/0 scope 0x40 secondary dev bond0
ip addr del 4.117.174.103/0 scope 0x40 dev bond0
ip link delete bond0 type bond
In this reproduction test case, an incorrect 'last_prim' is found in
__inet_del_ifa(), as a result, the secondary address(0.0.0.4/0 scope 0x40)
is lost. The memory of the secondary address is leaked and the reference of
in_device and net_device is leaked.
Fix this problem:
Look for 'last_prim' starting at location of the deleted IP and inserting
the promoted IP into the location of 'last_prim'.
Fixes: 0ff60a4567 ("[IPV4]: Fix secondary IP addresses after promotion")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking updates from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets are
hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream"
* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
Revert "net: team: do not use dynamic lockdep key"
net: hns3: remove GSO partial feature bit
net: hns3: fix the port information display when sfp is absent
net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
net: hns3: fix debugfs concurrency issue between kfree buffer and read
net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
net: hns3: Support query tx timeout threshold by debugfs
net: hns3: fix tx timeout issue
net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
s390/bpf: Pass through tail call counter in trampolines
...
Pull more devicetree updates from Rob Herring:
"A couple of conversions which didn't get picked up by the subsystems
and one fix:
- Convert st,stih407-irq-syscfg and Omnivision OV7251 bindings to DT
schema
- Merge Omnivision OV5695 into OV5693 binding
- Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY"
* tag 'devicetree-fixes-for-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: irqchip: convert st,stih407-irq-syscfg to DT schema
media: dt-bindings: Convert Omnivision OV7251 to DT schema
media: dt-bindings: Merge OV5695 into OV5693 binding
of: overlay: Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY
Pull pwm updates from Thierry Reding:
"Various cleanups and fixes across the board"
* tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (31 commits)
pwm: lpc32xx: Remove handling of PWM channels
pwm: atmel: Simplify using devm functions
dt-bindings: pwm: brcm,kona-pwm: convert to YAML
pwm: stmpe: Handle errors when disabling the signal
pwm: stm32: Simplify using devm_pwmchip_add()
pwm: stm32: Don't modify HW state in .remove() callback
pwm: Fix order of freeing resources in pwmchip_remove()
pwm: ntxec: Use device_set_of_node_from_dev()
pwm: ntxec: Drop a write-only variable from driver data
pwm: pxa: Don't reimplement of_device_get_match_data()
pwm: lpc18xx-sct: Simplify using devm_clk_get_enabled()
pwm: atmel-tcb: Don't track polarity in driver data
pwm: atmel-tcb: Unroll atmel_tcb_pwm_set_polarity() into only caller
pwm: atmel-tcb: Put per-channel data into driver data
pwm: atmel-tcb: Fix resource freeing in error path and remove
pwm: atmel-tcb: Harmonize resource allocation order
pwm: Drop unused #include <linux/radix-tree.h>
pwm: rz-mtu3: Fix build warning 'num_channel_ios' not described
pwm: Remove outdated documentation for pwmchip_remove()
pwm: atmel: Enable clk when pwm already enabled in bootloader
...
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- Add a way for drivers to tell the core the supported alarm range is
smaller than the date range. This is not used yet but will be
useful for the alarmtimers in the next release.
- fix Wvoid-pointer-to-enum-cast warnings
- remove redundant of_match_ptr()
- stop warning for invalid alarms when the alarm is disabled
Drivers:
- isl12022: allow setting the trip level for battery level detection
- pcf2127: add support for PCF2131 and multiple timestamps
- stm32: time precision improvement, many fixes
- twl: NVRAM support"
* tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits)
dt-bindings: rtc: ds3231: Remove text binding
rtc: wm8350: remove unnecessary messages
rtc: twl: remove unnecessary messages
rtc: sun6i: remove unnecessary message
rtc: stop warning for invalid alarms when the alarm is disabled
rtc: twl: add NVRAM support
rtc: pcf85363: Allow to wake up system without IRQ
rtc: m48t86: add DT support for m48t86
dt-bindings: rtc: Add ST M48T86
rtc: pcf2127: remove useless check
rtc: rzn1: Report maximum alarm limit to rtc core
rtc: ds1305: Report maximum alarm limit to rtc core
rtc: tps6586x: Report maximum alarm limit to rtc core
rtc: cmos: Report supported alarm limit to rtc infrastructure
rtc: cros-ec: Detect and report supported alarm window size
rtc: Add support for limited alarm timer offsets
rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb()
MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section
rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq()
rtc: omap: Do not check for 0 return after calling platform_get_irq()
...
Pull i3c updates from Alexandre Belloni:
"Core:
- Fix SETDASA when static and dynamic adress are equal
- Fix cmd_v1 DAA exit criteria
Drivers:
- svc: allow probing without any device"
* tag 'i3c/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: fix probe failure when no i3c device exist
i3c: master: Fix SETDASA process
dt-bindings: i3c: Fix description for assigned-address
i3c: master: svc: Describe member 'saved_regs'
i3c: master: svc: Do not check for 0 return after calling platform_get_irq()
i3c/master: cmd_v1: Fix the exit criteria for the daa procedure
i3c: Explicitly include correct DT includes
Pull regulator fixes from Mark Brown:
"A couple of fixes that came in during the merge window, both driver
specific - one for a bug that came up in testing, one for a bug due
to a misreading of the datasheet"
* tag 'regulator-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps6594-regulator: Fix random kernel crash
regulator: tps6287x: Fix n_voltages
Pull spi fixes from Mark Brown:
"A couple of fixes for the sun6i driver. The patch to reduce DMA RX to
single byte width all the time is *hopefully* excessively cautious but
it's unclear which SoCs are affected so the fix just covers everything
for safety"
* tag 'spi-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: sun6i: fix race between DMA RX transfer completion and RX FIFO drain
spi: sun6i: reduce DMA RX transfer width to single byte
Pull kvm updates from Paolo Bonzini:
"ARM:
- Clean up vCPU targets, always returning generic v8 as the preferred
target
- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)
- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.
- Fix vPMU issues related to handling of PMUver.
- Don't unnecessary align non-stack allocations in the EL2 VA space
- Drop HCR_VIRT_EXCP_MASK, which was never used...
- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead
- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
- Remove prototypes without implementations
RISC-V:
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
s390:
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
x86:
- Clean up KVM's handling of Intel architectural events
- Intel bugfixes
- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE
update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)
- Retry APIC map recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code
- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process
Generic:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.
- Drop unused function declarations
Selftests:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...
Pull more s390 updates from Heiko Carstens:
- A couple of virtual vs physical address confusion fixes
- Rework locking in dcssblk driver to address a lockdep warning
- Remove support for "noexec" kernel command line option since there is
no use case where it would make sense
- Simplify kernel mapping setup and get rid of quite a bit of code
- Add architecture specific __set_memory_yy() functions which allow us
to modify kernel mappings. Unlike the set_memory_xx() variants they
take void pointer start and end parameters, which allows using them
without the usual casts, and also to use them on areas larger than
8TB.
Note that the set_memory_xx() family comes with an int num_pages
parameter which overflows with 8TB. This could be addressed by
changing the num_pages parameter to unsigned long, however requires
to change all architectures, since the module code expects an int
parameter (see module_set_memory()).
This was indeed an issue since for debug_pagealloc() we call
set_memory_4k() on the whole identity mapping. Therefore address this
for now with the __set_memory_yy() variant, and address common code
later
- Use dev_set_name() and also fix memory leak in zcrypt driver error
handling
- Remove unused lsi_mask from airq_struct
- Add warning for invalid kernel mapping requests
* tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vmem: do not silently ignore mapping limit
s390/zcrypt: utilize dev_set_name() ability to use a formatted string
s390/zcrypt: don't leak memory if dev_set_name() fails
s390/mm: fix MAX_DMA_ADDRESS physical vs virtual confusion
s390/airq: remove lsi_mask from airq_struct
s390/mm: use __set_memory() variants where useful
s390/set_memory: add __set_memory() variant
s390/set_memory: generate all set_memory() functions
s390/mm: improve description of mapping permissions of prefix pages
s390/amode31: change type of __samode31, __eamode31, etc
s390/mm: simplify kernel mapping setup
s390: remove "noexec" option
s390/vmem: fix virtual vs physical address confusion
s390/dcssblk: fix lockdep warning
s390/monreader: fix virtual vs physical address confusion
Pull MIPS updates from Thomas Bogendoerfer:
"Just cleanups and fixes"
* tag 'mips_6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: TXx9: Do PCI error checks on own line
arch/mips/configs/*_defconfig cleanup
MIPS: VDSO: Conditionally export __vdso_gettimeofday()
Mips: loongson3_defconfig: Enable ast drm driver by default
mips: remove <asm/export.h>
mips: replace #include <asm/export.h> with #include <linux/export.h>
mips: remove unneeded #include <asm/export.h>
MIPS: Loongson64: Fix more __iomem attributes
MIPS: loongson32: Remove regs-rtc.h
MIPS: loongson32: Remove regs-clk.h
MIPS: More explicit DT include clean-ups
MIPS: Fixup explicit DT include clean-up
Revert MIPS: Loongson: Fix build error when make modules_install
MIPS: Only fiddle with CHECKFLAGS if `need-compiler'
MIPS: Fix CONFIG_CPU_DADDI_WORKAROUNDS `modules_install' regression
MIPS: Explicitly include correct DT includes
Pull xtensa updates from Max Filippov:
- enable MTD XIP support
- fix base address of the xtensa perf module in newer hardware
* tag 'xtensa-20230905' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: add XIP-aware MTD support
xtensa: PMU: fix base address for the newer hardware
Recently we moved most cleanup from ntfs_put_super() into
ntfs3_kill_sb() as part of a bigger cleanup. This accidently also moved
dropping inode references stashed in ntfs3's sb->s_fs_info from
@sb->put_super() to @sb->kill_sb(). But generic_shutdown_super()
verifies that there are no busy inodes past sb->put_super(). Fix this
and disentangle dropping inode references from freeing @sb->s_fs_info.
Fixes: a4f64a300a ("ntfs3: free the sbi in ->kill_sb") # mainline only
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mateusz reports that glibc turns 'fstat()' calls into 'fstatat()', and
that seems to have been going on for quite a long time due to glibc
having tried to simplify its stat logic into just one point.
This turns out to cause completely unnecessary overhead, where we then
go off and allocate the kernel side pathname, and actually look up the
empty path. Sure, our path lookup is quite optimized, but it still
causes a fair bit of allocation overhead and a couple of completely
unnecessary rounds of lockref accesses etc.
This is all hopefully getting fixed in user space, and there is a patch
floating around for just having glibc use the native fstat() system
call. But even with the current situation we can at least improve on
things by catching the situation and short-circuiting it.
Note that this is still measurably slower than just a plain 'fstat()',
since just checking that the filename is actually empty is somewhat
expensive due to inevitable user space access overhead from the kernel
(ie verifying pointers, and SMAP on x86). But it's still quite a bit
faster than actually looking up the path for real.
To quote numers from Mateusz:
"Sapphire Rapids, will-it-scale, ops/s
stock fstat 5088199
patched fstat 7625244 (+49%)
real fstat 8540383 (+67% / +12%)"
where that 'stock fstat' is the glibc translation of fstat into
fstatat() with an empty path, the 'patched fstat' is with this short
circuiting of the path lookup, and the 'real fstat' is the actual native
fstat() system call with none of this overhead.
Link: https://lore.kernel.org/lkml/20230903204858.lv7i3kqvw6eamhgz@f/
Reported-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Florian Westphal says:
====================
netfilter updates for net
This PR contains nf_tables updates for your *net* tree.
This time almost all fixes are for old bugs:
First patch fixes a 4-byte stack OOB write, from myself.
This was broken ever since nftables was switches from 128 to 32bit
register addressing in v4.1.
2nd patch fixes an out-of-bounds read.
This has been broken ever since xt_osf got added in 2.6.31, the bug
was then just moved around during refactoring, from Wander Lairson Costa.
3rd patch adds a missing enum description, from Phil Sutter.
4th patch fixes a UaF inftables that occurs when userspace adds
elements with a timeout so small that expiration happens while the
transaction is still in progress. Fix from Pablo Neira Ayuso.
Patch 5 fixes a memory out of bounds access, this was
broken since v4.20. Patch from Kyle Zeng and Jozsef Kadlecsik.
Patch 6 fixes another bogus memory access when building audit
record. Bug added in the previous pull request, fix from Pablo.
netfilter pull request 2023-09-06
* tag 'nf-23-09-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
====================
Link: https://lore.kernel.org/r/20230906162525.11079-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
HNS3 NIC does not support GSO partial packets segmentation. Actually tunnel
packets for example NvGRE packets segment offload and checksum offload is
already supported. There is no need to keep gso partial feature bit. So
this patch removes it.
Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When sfp is absent or unidentified, the port type should be
displayed as PORT_OTHERS, rather than PORT_FIBRE.
Fixes: 88d10bd6f7 ("net: hns3: add support for multiple media type")
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We hope that tc qdisc and dcb ets commands can not be used crosswise.
If we want to use any of the commands to configure tc,
We must use the other command to clear the existing configuration.
However, when we configure a single tc with tc qdisc,
we can still configure it with dcb ets.
Because we use mqprio_active as the tag of tc qdisc configuration,
but with dcb ets, we do not check mqprio_active.
This patch fix this issue by check mqprio_active before
executing the dcb ets command. and add dcb_ets_active to
replace HCLGE_FLAG_DCB_ENABLE and HCLGE_FLAG_MQPRIO_ENABLE
at the hclge layer,
Fixes: cacde272dd ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now in hns3_dbg_uninit(), there may be concurrency between
kfree buffer and read, it may result in memory error.
Moving debugfs_remove_recursive() in front of kfree buffer to ensure
they don't happen at the same time.
Fixes: 5e69ea7ee2 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
req1->tcam_data is defined as "u8 tcam_data[8]", and we convert it as
(u32 *) without considerring byte order conversion,
it may result in printing wrong data for tcam_data.
Convert tcam_data to (__le32 *) first to fix it.
Fixes: b5a0b70d77 ("net: hns3: refactor dump fd tcam of debugfs")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the driver knocks the ring doorbell before updating
the ring->last_to_use in tx flow. if the hardware transmiting
packet and napi poll scheduling are fast enough, it may get
the old ring->last_to_use in drivers' napi poll.
In this case, the driver will think the tx is not completed, and
return directly without clear the flag __QUEUE_STATE_STACK_XOFF,
which may cause tx timeout.
Fixes: 20d06ca267 ("net: hns3: optimize the tx clean process")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The KSZ9477 errata points out (in 'Module 4') the link up/down problems
when EEE (Energy Efficient Ethernet) is enabled in the device to which
the KSZ9477 tries to auto negotiate.
The suggested workaround is to clear advertisement of EEE for PHYs in
this chip driver.
To avoid regressions with other switch ICs the new MICREL_NO_EEE flag
has been introduced.
Moreover, the in-register disablement of MMD_DEVICE_ID_EEE_ADV.MMD_EEE_ADV
MMD register is removed, as this code is both; now executed too late
(after previous rework of the PHY and DSA for KSZ switches) and not
required as setting all members of eee_broken_modes bit field prevents
the KSZ9477 from advertising EEE.
Fixes: 69d3b36ca0 ("net: dsa: microchip: enable EEE support") # for KSZ9477
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # Confirmed disabled EEE with oscilloscope.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230905093315.784052-1-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2023-09-06
We've added 9 non-merge commits during the last 6 day(s) which contain
a total of 12 files changed, 189 insertions(+), 44 deletions(-).
The main changes are:
1) Fix bpf_sk_storage to address an invalid wait context lockdep
report and another one to address missing omem uncharge,
from Martin KaFai Lau.
2) Two BPF recursion detection related fixes,
from Sebastian Andrzej Siewior.
3) Fix tailcall limit enforcement in trampolines for s390 JIT,
from Ilya Leoshkevich.
4) Fix a sockmap refcount race where skbs in sk_psock_backlog can
be referenced after user space side has already skb_consumed them,
from John Fastabend.
5) Fix BPF CI flake/race wrt sockmap vsock write test where
the transport endpoint is not connected, from Xu Kuohai.
6) Follow-up doc fix to address a cross-link warning,
from Eduard Zingerman.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
s390/bpf: Pass through tail call counter in trampolines
bpf: Assign bpf_tramp_run_ctx::saved_run_ctx before recursion check.
bpf: Invoke __bpf_prog_exit_sleepable_recur() on recursion in kern_sys_bpf().
bpf, sockmap: Fix skb refcnt race after locking changes
docs/bpf: Fix "file doesn't exist" warnings in {llvm_reloc,btf}.rst
selftests/bpf: Fix a CI failure caused by vsock write
====================
Link: https://lore.kernel.org/r/20230906095117.16941-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull ceph updates from Ilya Dryomov:
"Mixed with some fixes and cleanups, this brings in reasonably complete
fscrypt support to CephFS! The list of things which don't work with
encryption should be fairly short, mostly around the edges: fallocate
(not supported well in CephFS to begin with), copy_file_range
(requires re-encryption), non-default striping patterns.
This was a multi-year effort principally by Jeff Layton with
assistance from Xiubo Li, Luís Henriques and others, including several
dependant changes in the MDS, netfs helper library and fscrypt
framework itself"
* tag 'ceph-for-6.6-rc1' of https://github.com/ceph/ceph-client: (53 commits)
ceph: make num_fwd and num_retry to __u32
ceph: make members in struct ceph_mds_request_args_ext a union
rbd: use list_for_each_entry() helper
libceph: do not include crypto/algapi.h
ceph: switch ceph_lookup/atomic_open() to use new fscrypt helper
ceph: fix updating i_truncate_pagecache_size for fscrypt
ceph: wait for OSD requests' callbacks to finish when unmounting
ceph: drop messages from MDS when unmounting
ceph: update documentation regarding snapshot naming limitations
ceph: prevent snapshot creation in encrypted locked directories
ceph: add support for encrypted snapshot names
ceph: invalidate pages when doing direct/sync writes
ceph: plumb in decryption during reads
ceph: add encryption support to writepage and writepages
ceph: add read/modify/write to ceph_sync_write
ceph: align data in pages in ceph_sync_write
ceph: don't use special DIO path for encrypted inodes
ceph: add truncate size handling support for fscrypt
ceph: add object version support for sync read
libceph: allow ceph_osdc_new_request to accept a multi-op read
...
Pull input updates from Dmitry Torokhov:
- a new driver for Azoteq IQS7210A/7211A/E touch controllers
- support for Azoteq IQS7222D variant added to iqs7222 driver
- support for touch keys functionality added to Melfas MMS114 driver
- new hardware IDs added to exc3000 and Goodix drivers
- xpad driver gained support for GameSir T4 Kaleid Controller
- a fix for xpad driver to properly support some third-party
controllers that need a magic packet to start properly
- a fix for psmouse driver to more reliably switch to RMI4 mode on
devices that use native RMI4/SMbus protocol
- a quirk for i8042 for TUXEDO Gemini 17 Gen1/Clevo PD70PN laptops
- multiple drivers have been updated to make use of devm and other
newer APIs such as dev_err_probe(), devm_regulator_get_enable(), and
others.
* tag 'input-for-v6.6-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (83 commits)
Input: goodix - add support for ACPI ID GDX9110
Input: rpckbd - fix the return value handle for platform_get_irq()
Input: tca6416-keypad - switch to using input core's polling features
Input: tca6416-keypad - convert to use devm_* api
Input: tca6416-keypad - fix interrupt enable disbalance
Input: tca6416-keypad - rely on I2C core to set up suspend/resume
Input: tca6416-keypad - always expect proper IRQ number in i2c client
Input: lm8323 - convert to use devm_* api
Input: lm8323 - rely on device core to create kp_disable attribute
Input: qt2160 - convert to use devm_* api
Input: qt2160 - do not hard code interrupt trigger
Input: qt2160 - switch to using threaded interrupt handler
Input: qt2160 - tweak check for i2c adapter functionality
Input: psmouse - add delay when deactivating for SMBus mode
Input: mcs-touchkey - fix uninitialized use of error in mcs_touchkey_probe()
Input: qt1070 - convert to use devm_* api
Input: mcs-touchkey - convert to use devm_* api
Input: amikbd - convert to use devm_* api
Input: lm8333 - convert to use devm_* api
Input: mms114 - add support for touch keys
...
Pull watchdog updates from Wim Van Sebroeck:
- add marvell GTI watchdog driver
- add support for Amlogic-T7 SoCs
- document the IPQ5018 watchdog compatible
- enable COMPILE_TEST for more watchdog device drivers
- core: stop watchdog when executing poweroff command
- other small improvements and fixes
* tag 'linux-watchdog-6.6-rc1' of git://www.linux-watchdog.org/linux-watchdog: (21 commits)
watchdog: Add support for Amlogic-T7 SoCs
watchdog: Add a new struct for Amlogic-GXBB driver
dt-bindings: watchdog: Add support for Amlogic-T7 SoCs
dt-bindings: watchdog: qcom-wdt: document IPQ5018
watchdog: imx2_wdt: Improve dev_crit() message
watchdog: stm32: Drop unnecessary of_match_ptr()
watchdog: sama5d4: readout initial state
watchdog: intel-mid_wdt: add MODULE_ALIAS() to allow auto-load
watchdog: core: stop watchdog when executing poweroff command
watchdog: pm8916_wdt: Remove redundant of_match_ptr()
watchdog: xilinx_wwdt: Use div_u64() in xilinx_wwdt_start()
watchdog: starfive: Remove #ifdef guards for PM related functions
watchdog: s3c2410: Fix potential deadlock on &wdt->lock
watchdog:rit_wdt: Add support for WDIOF_CARDRESET
dt-bindings: watchdog: ti,rti-wdt: Add support for WDIOF_CARDRESET
watchdog: Enable COMPILE_TEST for more drivers
watchdog: advantech_ec_wdt: fix Kconfig dependencies
watchdog: Explicitly include correct DT includes
Watchdog: Add marvell GTI watchdog driver
dt-bindings: watchdog: marvell GTI system watchdog driver
...
The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can
lead to the use of wrong `CIDR_POS(c)` for calculating array offsets,
which can lead to integer underflow. As a result, it leads to slab
out-of-bound access.
This patch adds back the IP_SET_HASH_WITH_NET0 macro to
ip_set_hash_netportnet to address the issue.
Fixes: 886503f34d ("netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net")
Suggested-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Kyle Zeng <zengyhkyle@gmail.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
