Remove the local variable "array" and all the memcpy function calls
because this copy operation from different arrays to this variable is
unnecessary.
The vnt_control_out function already does a kmemdup copy of its const
char *buffer argument and this was made unnecessary by:
commit 12ecd24ef9
("staging: vt6656: use off stack for out buffer USB transfers.")
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Sat Apr 22 11:14:57 2017 +0100
staging: vt6656: use off stack for out buffer USB transfers.
Since 4.9 mandated USB buffers be heap allocated this causes the driver
to fail.
Since there is a wide range of buffer sizes use kmemdup to create
allocated buffer.
So, the same result can be achieved using the arrays directly.
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Link: https://lore.kernel.org/r/20200425151747.8199-2-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove debug print statements referring to non-existent fields
'lbq_clean_idx' and 'lbq_free_cnt' in the 'rx_ring' struct, which causes
a compilation failure when QL_DEV_DUMP is set.
These fields were initially removed as a part of commit aec626d209
("staging: qlge: Update buffer queue prod index despite oom") in 2019.
Their replacement fields ('next_to_use' and 'next_to_clean') are already
being printed, so this patch does not add new debug statements for them.
Signed-off-by: Rylan Dmello <mail@rylan.coffee>
Link: https://lore.kernel.org/r/aa7e0197f4e34cec0855124e45696e33dd9527e5.1587959245.git.mail@rylan.coffee
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove statement that tries to print the non-existent 'vlgrp' field
in the 'ql_adapter' struct, which causes a compilation failure when
QL_DEV_DUMP is set.
vlgrp seems to have been removed from ql_adapter as a part of
commit 18c49b9177 ("qlge: do vlan cleanup") in 2011.
vlgrp might be replaced by the 'active_vlans' array introduced in the
aforementioned commit. But I'm not sure if printing all 64 values of
that array would help with debugging this driver, so I'm leaving it
out of the debug code in this patch.
Signed-off-by: Rylan Dmello <mail@rylan.coffee>
Link: https://lore.kernel.org/r/51bae37a54d414491779e4a3329508cc864ab900.1587959245.git.mail@rylan.coffee
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check the return value of vnt_control_out_* function calls. When
necessary modify the function prototype to be able to return the new
checked error code.
It's safe to modify all the function prototypes without fix the call
because the only change is the return value from void to int. If before
the call didn't check the return value, now neither.
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Link: https://lore.kernel.org/r/20200425134257.4502-2-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device raises error indications when it thinks there is a bug in the
driver and it can't recover it (while it raises exception when a bug is
detected in the device).
The current list of of errors was a bit dated.
This patch cleans up the list of errors and the associated message. It
is also the right time to clean up the way the error indications are
handled. Replace the switch..case with a clean loop over an array.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200427134031.323403-18-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device keep up to date three series of stats. One for each
virtual interface and one for the whole device.
Until to now, the stats for the whole device were unavailable. Moreover,
it is interesting to retrieve counters for all interfaces even if they
are not awake.
Change the counters available in debugfs in order to retrieve stats
from all interfaces.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200427134031.323403-13-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some circumstances, Tx traffic is sent without associated station but
the station exists when the Tx status is received. Beside that, the
driver keep a counter associated to each station. So, in this case, the
counter is not incremented, but is decremented. In this case a warning
"inconsistent notification" appears:
------------[ cut here ]------------
WARNING: CPU: 3 PID: 82 at /home/jerome/wfx/data_tx.c:469 wfx_skb_dtor+0x1a4/0x1d4 [wfx]
inconsistent notification
Modules linked in: [...]
CPU: 3 PID: 82 Comm: kworker/3:1H Tainted: G C O 4.19.57-v7l+ #1244
Hardware name: BCM2835
Workqueue: events_highpri bh_work [wfx]
[<c0212c8c>] (unwind_backtrace) from [<c020d49c>] (show_stack+0x20/0x24)
[<c020d49c>] (show_stack) from [<c0976220>] (dump_stack+0xd4/0x118)
[<c0976220>] (dump_stack) from [<c0222270>] (__warn+0x104/0x11c)
[<c0222270>] (__warn) from [<c02222e0>] (warn_slowpath_fmt+0x58/0x74)
[<c02222e0>] (warn_slowpath_fmt) from [<bf497b48>] (wfx_skb_dtor+0x1a4/0x1d4 [wfx])
[<bf497b48>] (wfx_skb_dtor [wfx]) from [<bf4988b4>] (wfx_tx_confirm_cb+0x198/0x2f0 [wfx])
[<bf4988b4>] (wfx_tx_confirm_cb [wfx]) from [<bf49d054>] (hif_tx_confirm+0x50/0x70 [wfx])
[<bf49d054>] (hif_tx_confirm [wfx]) from [<bf49d42c>] (wfx_handle_rx+0x128/0x22c [wfx])
[<bf49d42c>] (wfx_handle_rx [wfx]) from [<bf4953cc>] (bh_work+0x3cc/0x964 [wfx])
[<bf4953cc>] (bh_work [wfx]) from [<c023dab8>] (process_one_work+0x170/0x458)
[<c023dab8>] (process_one_work) from [<c023ddfc>] (worker_thread+0x5c/0x5a4)
[<c023ddfc>] (worker_thread) from [<c02440e8>] (kthread+0x138/0x168)
[<c02440e8>] (kthread) from [<c02010ac>] (ret_from_fork+0x14/0x28)
Exception stack(0xee199fb0 to 0xee199ff8)
9fa0: 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
---[ end trace 64b9e754e12ef7de ]---
This patch fix this race between the station creation and the Tx data.
Fixes: 7d2d2bfdeb ("staging: wfx: relocate "buffered" information to sta_priv")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200427134031.323403-11-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It has been reported that trying to send small packets of data could
produce a "inconsistent notification" warning.
It seems that in some circumstances, the number of frame queued in the
driver could greatly increase and exceed UCHAR_MAX. So the field
"buffered" from struct sta_priv can overflow.
Just increase the size of "bueffered" to fix the problem.
Fixes: 7d2d2bfdeb ("staging: wfx: relocate "buffered" information to sta_priv")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200427134031.323403-10-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Device is able to detect a high temperature. In this case, the traffic
is not allowed to be sent until the temperature decrease.
This patch detects the warnings raised by the device and stop the
traffic accordingly. It also add a delayed task as safeguard in case the
chip would never send the indication that the temperature decrease.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200427134031.323403-7-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wfx_suspend_resume_mc() is called when the device is about to sent a
DTIM. This is the right moment to enqueue Content After DTIM Beacon
(CAB).
However, wfx_suspend_resume_mc() is also called when the DTIM period
ends. Until now, this event did also trig CAB.
Note this issue did not have too much impact since when a CAB is sent
outside of DTIM window, an error is reported by the firmware and
mac80211 retries to send the data.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200427134031.323403-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When multiple virtual interfaces (on different channels) are in use, the
device ask to activate Power Save on station interfaces. The device
developers recommends to use legacy PS-Poll in this case since it is the
mode that disturb the less the other interface. However, some AP start
to not answer anymore to PS-Poll. The device is able to detect this case
and return a special warning in this case.
So, this commit catch the warning and force usage of FastPS in this
case.
In order to confuse the less possible the other interface a small FastPS
period is used (30ms).
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200427134031.323403-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the staging fixes in here too, and this resolves a merge issue
with the vt6656 driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull cifs fixes from Steve French:
"Five cifs/smb3 fixes:two for DFS reconnect failover, one lease fix for
stable and the others to fix a missing spinlock during reconnect"
* tag '5.7-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix uninitialised lease_key in open_shroot()
cifs: ensure correct super block for DFS reconnect
cifs: do not share tcons with DFS
cifs: minor update to comments around the cifs_tcp_ses_lock mutex
cifs: protect updating server->dstaddr with a spinlock
Pull USB fixes from Greg KH:
"Here are a number of USB driver fixes for 5.7-rc3.
Nothing huge, just the usual collection of:
- xhci fixes
- gadget driver fixes
- syzkaller fuzzing fixes
- new device ids and DT bindings
- new quirks added for broken devices
A few of the gadget driver fixes show up twice here as they were
applied to my branch, and also by Felipe to his branch which I then
pulled in as we got out of sync a bit.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
USB: sisusbvga: Change port variable from signed to unsigned
usb-storage: Add unusual_devs entry for JMicron JMS566
USB: hub: Revert commit bd0e6c9614 ("usb: hub: try old enumeration scheme first for high speed devices")
USB: hub: Fix handling of connect changes during sleep
usb: typec: altmode: Fix typec_altmode_get_partner sometimes returning an invalid pointer
xhci: Don't clear hub TT buffer on ep0 protocol stall
xhci: prevent bus suspend if a roothub port detected a over-current condition
xhci: Fix handling halted endpoint even if endpoint ring appears empty
usb: raw-gadget: Fix copy_to/from_user() checks
usb: raw-gadget: fix raw_event_queue_fetch locking
usb: gadget: udc: atmel: Fix vbus disconnect handling
usb: dwc3: gadget: Fix request completion check
USB: Add USB_QUIRK_DELAY_CTRL_MSG and USB_QUIRK_DELAY_INIT for Corsair K70 RGB RAPIDFIRE
phy: tegra: Select USB_COMMON for usb_get_maximum_speed()
usb: typec: tcpm: Ignore CC and vbus changes in PORT_RESET change
usb: f_fs: Clear OS Extended descriptor counts to zero in ffs_data_reset()
cdc-acm: introduce a cool down
cdc-acm: close race betrween suspend() and acm_softint
UAS: fix deadlock in error handling and PM flushing work
UAS: no use logging any details in case of ENODEV
...
Pull tty/serial fixes from Greg KH:
"Here are some tty and serial driver fixes for 5.7-rc3.
The "largest" in here are a number of reverts for previous changes to
the uartps serial driver that turned out to not be a good idea at all.
The others are just small fixes found by people and tools. Included in
here is a much-reported symbol export needed by previous changes that
happened in 5.7-rc1. All of these have been in linux-next for a while
with no reported issues"
* tag 'tty-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: hvc: fix buffer overflow during hvc_alloc().
tty: rocket, avoid OOB access
tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart
vt: don't hardcode the mem allocation upper bound
tty: serial: owl: add "much needed" clk_prepare_enable()
vt: don't use kmalloc() for the unicode screen buffer
tty/sysrq: Export sysrq_mask(), sysrq_toggle_support()
serial: sh-sci: Make sure status register SCxSR is read in correct sequence
serial: sunhv: Initialize lock for non-registered console
Revert "serial: uartps: Register own uart console and driver structures"
Revert "serial: uartps: Move Port ID to device data structure"
Revert "serial: uartps: Change uart ID port allocation"
Revert "serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES"
Revert "serial: uartps: Fix error path when alloc failed"
Revert "serial: uartps: Use the same dynamic major number for all ports"
Revert "serial: uartps: Fix uartps_major handling"
Pull char/misc driver fixes from Greg KH:
"Here are 4 small misc driver fixes for 5.7-rc3:
- mei driver fix
- interconnect driver fix
- two fpga driver fixes
All have been in linux-next with no reported issues"
* tag 'char-misc-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
interconnect: qcom: Fix uninitialized tcs_cmd::wait
mei: me: fix irq number stored in hw struct
fpga: dfl: pci: fix return value of cci_pci_sriov_configure
fpga: zynq: Remove clk_get error message for probe defer
Pull staging/IIO driver fixes from Greg KH:
"Here are some small staging and IIO driver fixes for 5.7-rc3
Lots of tiny things for reported issues in staging and IIO drivers,
including a counter driver fix as well (the iio drivers seem to be
tied to those). Full details of the fixes are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (27 commits)
staging: vt6656: Fix calling conditions of vnt_set_bss_mode
staging: comedi: Fix comedi_device refcnt leak in comedi_open
staging: vt6656: Fix pairwise key entry save.
staging: vt6656: Fix drivers TBTT timing counter.
staging: vt6656: Don't set RCR_MULTICAST or RCR_BROADCAST by default.
MAINTAINERS: remove Stefan Popa's email
iio: adc: ad7192: fix null pointer de-reference crash during probe
iio: core: remove extra semi-colon from devm_iio_device_register() macro
iio: adc: ti-ads8344: properly byte swap value
iio: imu: inv_mpu6050: fix suspend/resume with runtime power
iio: st_sensors: rely on odr mask to know if odr can be set
iio: xilinx-xadc: Make sure not exceed maximum samplerate
iio: xilinx-xadc: Fix sequencer configuration for aux channels in simultaneous mode
iio: xilinx-xadc: Fix clearing interrupt when enabling trigger
iio: xilinx-xadc: Fix ADC-B powerdown
iio: dac: ad5770r: fix off-by-one check on maximum number of channels
iio: imu: st_lsm6dsx: flush hw FIFO before resetting the device
iio: core: Fix handling of 'dB'
dt-bindings: iio: adc: stm32-adc: fix id relative path
counter: 104-quad-8: Add lock guards - generic interface
...
Pull driver core fixes from Greg KH:
"Here are some small firmware/driver core/debugfs fixes for 5.7-rc3.
The debugfs change is now possible as now the last users of
debugfs_create_u32() have been fixed up in the different trees that
got merged into 5.7-rc1, and I don't want it creeping back in.
The firmware changes did cause a regression in linux-next, so the
final patch here reverts part of that, re-exporting the symbol to
resolve that issue. All of these patches, with the exception of the
final one, have been in linux-next with only that one reported issue"
* tag 'driver-core-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware_loader: revert removal of the fw_fallback_config export
debugfs: remove return value of debugfs_create_u32()
firmware_loader: remove unused exports
firmware: imx: fix compile-testing
Pull s390 fixes from Vasily Gorbik:
- Add a few notrace annotations to avoid potential crashes when
switching ftrace tracers.
- Avoid setting affinity for floating irqs in pci code.
- Fix build issue found by kbuild test robot.
* tag 's390-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/protvirt: fix compilation issue
s390/pci: do not set affinity for floating irqs
s390/ftrace: fix potential crashes when switching tracers
Pull powerpc fixes from Michael Ellerman:
- One important fix for a bug in the way we find the cache-line size
from the device tree, which was leading to the wrong size being
reported to userspace on some platforms.
- A fix for 8xx STRICT_KERNEL_RWX which was leaving TLB entries around
leading to a window at boot when the strict mapping wasn't enforced.
- A fix to enable our KUAP (kernel user access prevention) debugging on
PPC32.
- A build fix for clang in lib/mpi.
Thanks to: Chris Packham, Christophe Leroy, Nathan Chancellor, Qian Cai.
* tag 'powerpc-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
lib/mpi: Fix building for powerpc with clang
powerpc/mm: Fix CONFIG_PPC_KUAP_DEBUG on PPC32
powerpc/8xx: Fix STRICT_KERNEL_RWX startup test failure
powerpc/setup_64: Set cache-line-size based on cache-block-size
Pull more Devicetree fixes from Rob Herring:
"A couple of schema and kbuild fixes"
* tag 'devicetree-fixes-for-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: phy: qcom-qusb2: Fix defaults
dt-bindings: Fix erroneous 'additionalProperties'
dt-bindings: Fix command line length limit calling dt-mk-schema
dt-bindings: Re-enable core schemas for dtbs_check
Christoph's patch removed two unsused exported symbols, however, one
symbol is used by the firmware_loader itself. If CONFIG_FW_LOADER=m so
the firmware_loader is modular but CONFIG_FW_LOADER_USER_HELPER=y we fail
the build at mostpost.
ERROR: modpost: "fw_fallback_config" [drivers/base/firmware_loader/firmware_class.ko] undefined!
This happens because the variable fw_fallback_config is built into the
kernel if CONFIG_FW_LOADER_USER_HELPER=y always, so we need to grant
access to the firmware loader module by exporting it.
Revert only one hunk from his patch.
Fixes: 739604734b ("firmware_loader: remove unused exports")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20200424184916.22843-1-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull pid leak fix from Eric Biederman:
"Oleg noticed that put_pid(thread_pid) was not getting called when proc
was not compiled in.
Let's get that fixed before 5.7 is released and causes problems for
anyone"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc: Put thread_pid in release_task not proc_flush_pid
Pull timer fixlet from Ingo Molnar:
"A single fix for a comment that may show up in DocBook output"
* tag 'timers-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vdso/datapage: Use correct clock mode name in comment
Pull scheduler fixes from Ingo Molnar:
"Misc fixes:
- an uclamp accounting fix
- three frequency invariance fixes and a readability improvement"
* tag 'sched-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix reset-on-fork from RT with uclamp
x86, sched: Move check for CPU type to caller function
x86, sched: Don't enable static key when starting secondary CPUs
x86, sched: Account for CPUs with less than 4 cores in freq. invariance
x86, sched: Bail out of frequency invariance if base frequency is unknown
Pull perf fixes from Ingo Molnar:
"Two changes:
- fix exit event records
- extend x86 PMU driver enumeration to add Intel Jasper Lake CPU
support"
* tag 'perf-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: fix parent pid/tid in task exit events
perf/x86/cstate: Add Jasper Lake CPU support
Pull objtool fixes from Ingo Molnar:
"Two fixes: fix an off-by-one bug, and fix 32-bit builds on 64-bit
systems"
* tag 'objtool-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix off-by-one in symbol_by_offset()
objtool: Fix 32bit cross builds
