On some systems, e.g. the Lenovo ThinkPad X1 Yoga gen 7 and the ThinkPad
X1 Nano gen 2 there is no clock-enable pin, triggering the:
"No clk GPIO. The privacy LED won't work" warning and causing the privacy
LED to not work.
Fix this by modeling the privacy LED as a LED class device rather then
integrating it with the registered clock.
Note this relies on media subsys changes to actually turn the LED on/off
when the sensor's v4l2_subdev's s_stream() operand gets called.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20230127203729.10205-4-hdegoede@redhat.com
Add a helper function to map the type returned by the _DSM
method to a function name + the default polarity for that function.
And fold the INT3472_GPIO_TYPE_RESET and INT3472_GPIO_TYPE_POWERDOWN
cases into a single generic case.
This is a preparation patch for further GPIO mapping changes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20230127203729.10205-3-hdegoede@redhat.com
Until now, the dell-wmi-ddv driver needs to be manually
patched and compiled to test compatibility with unknown
DDV WMI interface versions.
Add a module param to allow users to force loading even
when a unknown interface version was detected. Since this
might cause various unwanted side effects, the module param
is marked as unsafe.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230126194021.381092-5-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
While trying to solve a bugreport on bugzilla, i learned that
some devices (for example the Dell XPS 17 9710) provide a more
recent DDV WMI interface (version 3).
Since the new interface version just adds an additional method,
no code changes are necessary apart from whitelisting the version.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230126194021.381092-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This release adds following change:
- Minor fixes for coverity static analysis
- Don't read cpufreq on offline CPUs
- SST turbo-freq enable on auto mode when user disables SMT from
kernel command line
- Fix uncore frequency display
- Set uncore frequency max/min limits on perf level change
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When perf level is changed, uncore limits can change. Set the uncore
limits via Linux uncore sysfs, when user changes perf level with
-o option.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Need memory frequency quirk as Sapphire Rapids in Emerald Rapids.
So add Emerald Rapids CPU model check in is_spr_platform().
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: Subject, changelog and code edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Uncore P1 is not uncore minmum frequency. This is uncore base frequency.
Correct display from uncore-frequency-min(MHz)
to uncore-frequency-base(Mhz).
To get uncore min frequency use mailbox command
CONFIG_TDP_GET_RATIO_INFO. Use this mailbox to get uncore frequency
limits when present.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When SMT is disabled from kernel command line, sibling CPUs still
appears in the sysfs as offline CPUs. This is a problem when turbo-freq
is enabled in auto mode. They are still assigned to CLOS value
of 3 as they are still in the present CPU list. But they are not in the
sibling list of a CPU. When the CPU is a high priority CPU, because of
sibling it will be still set to CLOS to 3 as CLOS is assigned at core
level not at CPU level.
So, avoid setting CLOS 3 to offline CPU.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Due to some recent kernel changes, reading cpufreq attributes like
scaling_max_freq on offline CPUs returns error. So avoid reading
cpufreq attributes on offline CPUs.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
strlen() and strtok() takes null-termimated strings as input.
Make sure these strings are null-terminated before using them.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
struct isst_id *id is a pointer, comparing it with less than zero is wrong.
The check is there to make sure the id->pkg and id->die is set to -1, when
it is illegal or unavailable. Here comparing with MAX_PACKAGE_COUNT and
MAX_DIE_PER_PACKAGE is sufficient.
Hence remove the wrong check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: Subject and changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We currently have a struct ssam_request_sync and a function
ssam_request_sync(). While this is valid C, there are some downsides to
it.
One of these is that current Sphinx versions (>= 3.0) cannot
disambiguate between the two (see disucssion and pull request linked
below). It instead emits a "WARNING: Duplicate C declaration" and links
for the struct and function in the resulting documentation link to the
same entry (i.e. both to either function or struct documentation)
instead of their respective own entries.
While we could just ignore that and wait for a fix, there's also a point
to be made that the current naming can be somewhat confusing when
searching (e.g. via grep) or trying to understand the levels of
abstraction at play:
We currently have struct ssam_request_sync and associated functions
ssam_request_sync_[alloc|free|init|wait|...]() operating on this struct.
However, function ssam_request_sync() is one abstraction level above
this. Similarly, ssam_request_sync_with_buffer() is not a function
operating on struct ssam_request_sync, but rather a sibling to
ssam_request_sync(), both using the struct under the hood.
Therefore, rename the top level request functions:
ssam_request_sync() -> ssam_request_do_sync()
ssam_request_sync_with_buffer() -> ssam_request_do_sync_with_buffer()
ssam_request_sync_onstack() -> ssam_request_do_sync_onstack()
Link: https://lore.kernel.org/all/085e0ada65c11da9303d07e70c510dc45f21315b.1656756450.git.mchehab@kernel.org/
Link: https://github.com/sphinx-doc/sphinx/pull/8313
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221220175608.1436273-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The target ID of the base hub is currently set to KIP (keyboard/
peripherals). However, even though it manages such devices with the KIP
target ID, the base hub itself is actually accessed via the SAM target
ID. So set it accordingly.
Note that the target ID of the hub can be chosen arbitrarily and does
not directly correspond to any physical or virtual component of the EC.
This change is only a code improvement intended for consistency and
clarity, it does not fix an actual bug.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221202223327.690880-10-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Similar to the target category (TC), the target ID (TID) can be one
value out of a small number of choices, given in enum ssam_ssh_tid.
In the device ID macros, SSAM_SDEV() and SSAM_VDEV() we already use text
expansion to, both, remove some textual clutter for the target category
values and enforce that the value belongs to the known set. Now that we
know the names for the target IDs, use the same trick for them as well.
Also rename the SSAM_ANY_x macros to SSAM_SSH_x_ANY to better fit in.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221202223327.690880-9-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add command source and target IDs to trace events.
Tracing support for the Surface Aggregator driver was originally
implemented at a time when only two peers were known: Host and SAM. We
now know that there are at least five, with three actively being used
(Host, SAM, KIP; four with Debug if you want to count manually enabling
that interface). So it makes sense to also explicitly name the peers
involved when tracing.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221202223327.690880-4-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The `tid_in` and `tid_out` fields of the serial hub protocol command
struct (struct ssh_command) are actually source and target IDs,
indicating the peer from which the message originated and the peer for
which it is intended.
Change the naming of those fields accordingly and improve the protocol
documentation. Additionally, introduce an enum containing all currently
known peers, i.e. targets and sources.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221202223327.690880-3-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Using the serio subsystem now requires the code to be reachable:
x86_64-linux-ld: drivers/platform/x86/amd/pmc.o: in function `amd_pmc_suspend_handler':
pmc.c:(.text+0x86c): undefined reference to `serio_bus'
Add the usual dependency: as other users of serio use 'select'
rather than 'depends on', use the same here.
Fixes: 8e60615e89 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230127093950.2368575-1-arnd@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
As soon as the first handler or sysfs file is registered
the mutex may get used.
Move the initialization to before any handler registration /
sysfs file creation.
Likewise move the destruction of the mutex to after all
the de-initialization is done.
Fixes: da5ce22df5 ("platform/x86/amd/pmf: Add support for PMF core layer")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230130132554.696025-1-hdegoede@redhat.com
Every power mode of static power slider has its own AC and DC power
settings.
When the power source changes from AC to DC, corresponding DC thermals
were not updated from PMF config store and this leads the system to always
run on AC power settings.
Fix it by registering with power_supply notifier and apply DC settings
upon getting notified by the power_supply handler.
Fixes: da5ce22df5 ("platform/x86/amd/pmf: Add support for PMF core layer")
Suggested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230125095936.3292883-6-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a generic [devm_]led_get() method which can be used on both devicetree
and non devicetree platforms to get a LED classdev associated with
a specific function on a specific device, e.g. the privacy LED associated
with a specific camera sensor.
Note unlike of_led_get() this takes a string describing the function
rather then an index. This is done because e.g. camera sensors might
have a privacy LED, or a flash LED, or both and using an index
approach leaves it unclear what the function of index 0 is if there is
only 1 LED.
This uses a lookup-table mechanism for non devicetree platforms.
This allows the platform code to map specific LED class_dev-s to a specific
device,function combinations this way.
For devicetree platforms getting the LED by function-name could be made
to work using the standard devicetree pattern of adding a -names string
array to map names to the indexes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230120114524.408368-5-hdegoede@redhat.com
