PD#SWPL-1690
Problem:
YouTube requires support playback rate 0.25, 0.50, 1.00, 1.25, 1.50,
2.00
Solution:
vsync_slow_factor can be used to slow playback, extend it's value to
support fast playback
Verify:
mesongxl_p212_32_kernel49
Change-Id: I94589a210b8531cc198414b3017c3caf82827565
Signed-off-by: Daogao Xu <daogao.xu@amlogic.com>
PD#SWPL-2512
Problem:
isp reserved mem too large
Solution:
reduce isp mem to 256M
Verify:
A311D-W400
Change-Id: I33ee2872daf961da5f0ba4ba4810b0ac9690e45f
Signed-off-by: Jiacheng Mei <jiacheng.mei@amlogic.com>
PD#SWPL-2448
Problem:
can not read dnlp scurv_mid2 value
Solution:
fix the error
Verify:
t962x_r311
Change-Id: I7a7df769dd117fd83164065f6df8e3ae82c2499f
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
PD#SWPL-2348
Problem:
G12B need to support secure upgrade check
Solution:
add defendkey support in all G12B dts
Verify:
G12B skt board verify pass
Change-Id: I2c3f51e761531cf2169dda483991b3d876039686
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#SWPL-3188
Problem:
When HDMI cable is not connected(that is CVBS out), and system
may be panic after resume.
Solution:
Add NULL pointer protection check
Verify:
P212
Change-Id: I60818faaf7049667501e31990fa557b754ea7f1b
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-1910
Problem:
Black dot on cvbsout when local play 4k
Solution:
Set limit rang when vpp output yuv for cvbs
Verify:
test pass on u200/s905x
Change-Id: Ia3e93078eb1a00d8c974bae8cc373a3a679f8b9f
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
PD#SWPL-1968
Problem:
some error edid need to be parsed
Solution:
add parsing for non-standard dv edid
Verify:
t962e (txlx)
Change-Id: Ia952ed59650fd0b1c665ca03175a38c1cf3ae5bb
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-1600
Problem:
The current watchdog is not the upstream standard driver.
Solution:
Replace watchdog device tree to use the standard watchdog driver.
Verify:
S905X P215/P212 Android-32bit Kernel-32bit.
Change-Id: I972c8ebb0158caa2df393d9a2d687d9298181102
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
watchdog: Change the feed watchdog mode [1/1]
PD#SWPL-2378
Problem:
Using Android to feed watchdog is not easy to debug the
crash problem, in addition, the Android does not open
the dog feeding service.
Solution:
Change the DTS configuration and change into driver feed watchdog.
Verify:
test pass on g12a-u200
Change-Id: Ie0a91fd8451fdccf3038ba6290a277c9048c52cd
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
PD#SWPL-2719
Problem:
Can't idetify correctlly when move disk have multi
partition
Solution:
Remove the function of using the partition name as
the device node name
Verify:
test pass on tl1 ref board
Change-Id: I113e63f209c529149fb94b0bb10b0b254717c2bf
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
PD#SWPL-2347
Problem:
G12A need to support secure upgrade check
Solution:
add defendkey support in all G12A dts
Verify:
G12A skt board verify pass
Change-Id: I7343c2c553dfe776eefcfff9ab3a270c87014118
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#SWPL-2347
Problem:
G12A need to support secure upgrade check
Solution:
1.modify reserve memory mode
2.only use cpu0 in defendkey write process
Verify:
G12A skt board verify pass
Change-Id: Iad771381e959a79dcba7a0adb862295fa5ba5dee
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#OTT-937
Problem:
When kill mediacodec during playing drm, tvp memory not be freed
Solution:
Check tvp flag in kernel, free tvp memory if flag is not zero
Verify:
P212
Change-Id: I35cbb2808bf179710ec59bd5227995949946ee77
Signed-off-by: Tao Guo <tao.guo@amlogic.com>
PD#OTT-776
Problem:
dv core 2 get the error hsize and vsize from OSD module
Solution:
when opening 3 osd paths. we get the accurate the parameters again
Verify:
g12b s922
Change-Id: Ib6af084910c8cf1896060295c7cea75971cd86b6
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-2960
Problem:
If the overlay dts refers to a node which does not exist in the base
device tree, the final fdt will be in a damaged state after doing fdt
overlay
Solution:
Use the standard overlay dts syntax to note node to be applied instead
of the google recommended one
Verify:
Locally on P230
Change-Id: Ibf45abff1348437bc3fc2745e6d955cc8292db46
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#SWPL-2193
Problem:
Node dummy-battery and dummy-charger are android version
dependent, and should be "fdt overlayed"
Solution:
Add fdt overlay file android_p_overlay_dt.dts, and configure
dummy-battery and dummy-charger in it
Verify:
Locally on P212 and R311
Change-Id: I75a27a0ad1253556cae5273f36e0eb828291fd73
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
PD#SWPL-2193
Problem:
We cannot compile dtbo file in a way like
make ARCH=arm foo.dtbo
Solution:
Add dtbo target and reuse the dtb rules
Verify:
Locally verifed
Change-Id: I34b88e61b409defe553cf5ed1077c160b9a6f350
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
PD#SWPL-2193
This adds the following commits from upstream:
b1a60033c110 tests: Add a test for overlays syntactic sugar
737b2df39cc8 overlay: Add syntactic sugar version of overlays
497432fd2131 checks: Use proper format modifier for size_t
22a65c5331c2 dtc: Bump version to v1.4.5
c575d8059fff Add fdtoverlay to .gitignore
b6a6f9490d19 fdtoverlay: Sanity check blob size
8c1eb1526d2d pylibfdt: Use Python2 explicitly
ee3d26f6960b checks: add interrupts property check
c1e7738988f5 checks: add gpio binding properties check
b3bbac02d5e3 checks: add phandle with arg property checks
fe50bd1ecc1d fdtget: Split out cell list display into a new function
62d812308d11 README: Add a note about test_tree1.dts
5bed86aee9e8 pylibfdt: Add support for fdt_subnode_offset()
46f31b65b3b3 pylibfdt: Add support for fdt_node_offset_by_phandle()
a3ae43723687 pylibfdt: Add support for fdt_parent_offset()
a198af80344c pylibfdt: Add support for fdt_get_phandle()
b9eba92ea50f tests: Return a failure code when any tests fail
155faf6cc209 pylibfdt: Use local pylibfdt module
50e5cd07f325 pylibfdt: Add a test for use of uint32_t
ab78860f09f5 pylibfdt: Add stdint include to fix uint32_t
36f511fb1113 tests: Add stacked overlay tests on fdtoverlay
1bb00655d3e5 fdt: Allow stacked overlays phandle references
a33c2247ac8d Introduce fdt_setprop_placeholder() method
0016f8c2aa32 dtc: change default phandles to ePAPR style instead of both
e3b9a9588a35 tests: fdtoverlay unit test
42409146f2db fdtoverlay: A tool that applies overlays
aae22722fc8d manual: Document missing options
13ce6e1c2fc4 dtc: fix sprintf() format string error, again
d990b8013889 Makefile: Fix build on MSYS2 and Cygwin
51f56dedf8ea Clean up shared library compile/link options
21a2bc896e3d Suppress expected error message in fdtdump test
2a42b14d0d03 dtc: check.c fix compile error
a10cb3c818d3 Fix get_node_by_path string equality check
548aea2c436a fdtdump: Discourage use of fdtdump
c2258841a785 fdtdump: Fix over-zealous version check
9067ee4be0e6 Fix a few whitespace and style nits
e56f2b07be38 pylibfdt: Use setup.py to build the swig file
896f1c133265 pylibfdt: Use Makefile constructs to implement NO_PYTHON
90db6d9989ca pylibfdt: Allow setup.py to operate stand-alone
e20d9658cd8f Add Coverity Scan support
b04a2cf08862 pylibfdt: Fix code style in setup.py
1c5170d3a466 pylibfdt: Rename libfdt.swig to libfdt.i
580a9f6c2880 Add a libfdt function to write a property placeholder
ab15256d8d02 pylibfdt: Use the call function to simplify the Makefile
9f2e3a3a1f19 pylibfdt: Use the correct libfdt version in the module
e91c652af215 pylibfdt: Enable installation of Python module
8a892fd85d94 pylibfdt: Allow building to be disabled
741cdff85d3e .travis.yml: Add builds with and without Python library prerequisites
14c4171f4f9a pylibfdt: Use package_dir to set the package directory
89a5062ab231 pylibfdt: Use environment to pass C flags and files
4e0e0d049757 pylibfdt: Allow pkg-config to be supplied in the environment
6afd7d9688f5 Correct typo: s/pylibgfdt/pylibfdt/
Change-Id: Ib23ca90f1e34ed85db3aae9d223fc921e6f2114e
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
PD#OTT-778
Problem:
1.kernel received reboot command, but hang in shutdown
Solution:
move tasklet_disable behind tasklet_kill
Verify:
P321
Change-Id: I994c21c5aeb42dbbb4e3b50ccac8376db4d4039d
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Conflicts:
drivers/amlogic/media/deinterlace/deinterlace.c
PD#SWPL-2600
Problem:
osd display half menu when in 1080i
Solution:
osd: adjust free_scale_dst if interlaced
Verify:
verify by p212
Change-Id: Ie9faffbb5942faa317b380ca0cdbee072a30c01f
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-2580
Problem:
The vd1 postblend bit in vpp misc is overwriten.
Solution:
add more check for vd1 postblend bit in vsync
Verify:
verify by p212
Change-Id: I367e920c13764af41446d7d759aaf8388fb08722
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-2580
Problem:
The vd1 postblend bit in vpp misc is overwriten.
Solution:
osd: call osd_update_enable if needed
Verify:
verify by p212
Change-Id: I438848dc843ea370d65dc3c6b4befb32d1f2b5f8
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
PD#SWPL-2558
Problem:
a black horizontal line below the screen when play video
Solution:
set dummy data alpha
Verify:
verified on p321
Change-Id: I36dc924b9bc89f4f8ea61eb86c6f5bc9199e40ae
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#172587
Problem:
afbc now support on chip txlx and g12a,
but we use cpu_after_eq(G12A) to judge
if afbc is support or not.
Solution:
use is_meson_g12a_cpu() replace cpu_after_eq(G12A).
Verify:
u200(g12a),t962x_r311
Change-Id: I3fb7ed54f7137fada97481177e40a2543cf8df9f
Signed-off-by: huaihao guo <huaihao.guo@amlogic.com>
PD#SWPL-714
Problem:
The last few seconds of the DD+ stream are not smooth by DTV playback.
Solution:
check the apts and vpts both discontinue,then replay the stream.
Verify:
P321
Change-Id: I6cbbdecc052dfe9fef76b44f36545b231332ee12
Signed-off-by: Yinming Ding <yinming.ding@amlogic.com>
PD#SWPL-2565
Problem:
The splash screen problem for first frame after starting up.
Solution:
Modify the value of register afbc_gclk_ctrl.
Verify:
u211
Change-Id: Ie1ddfade0566ff8cd571c43ba8490a8c277a8758
Signed-off-by: Peng Yixin <yixin.peng@amlogic.com>
PD#SWPL-1207
Problem:
fix the filckered problem when playing transition
video in sdr tv
Solution:
when dv core2 don't run, the reset can't be executed
Verify:
r321
Change-Id: I719325f1722589e02a40d46442258b0d1e3feb17
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-2302
Problem:
Play online video,half an hour later, the TV shows
a pink screen and the sound is normal.
Solution:
Check hdcp1.4 status and disable encryption when fail.
Verify:
S922X
Change-Id: I6ce51824726b267d140750f9e9d80aa8bb921cac
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
PD#172587
Problem:
the line check always return low.
the print of check too much.
Solution:
modify the cec gpio from 7 to 10.
modify the check line.
Verify:
tl1 x301 board
Change-Id: I09ae5eee455d83e51e65957cd293e07da1c0046a
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
PD#SWPL-2539
Problem:
defendkey_reserved have influenced on display
during the system boot up
Solution:
adjust defendkey_reserved node location
Verify:
GXL/TXL skt board verify pass
Change-Id: I5cf0245f9653e20224c4e3bab1f6f05527011210
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#SWPL-2287
Problem:
set wakeup reason to stick mem
Solution:
set wakeup reason to stick mem
Verify:
gxl,test pass
Change-Id: Iff6f1824ea4ac9ec12b8295d4283992fdac03b14
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
PD#SWPL-2100
Problem:
GXL need to support secure upgrade check
Solution:
1.add dtb decrypt support
2.add 32bit defendkey support
Verify:
GXL skt board verify pass
Change-Id: I501967530b2a61d9b90c20241b82f92b00829453
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#SWPL-2100
Problem:
GXL need to support secure upgrade check
Solution:
add defendkey support in all GXL dts
Verify:
GXL skt board verify pass
Change-Id: I73b84b86f23f512ddc556b61f3a07d015c717e8c
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#SWPL-1804
Problem:
osd color error when osd hdr enabled
Solution:
div alpha when osd hdr enabled
Verify:
verified on u212 dev board
Change-Id: I1f5ea0db404d1956f454bd5da2532bded89626ee
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
