[ Upstream commit c2820405ba55a38932aa2177f026b70064296663 ]
Fix quirk for CME master keyboards so it not only handles
sysex but also song position pointer, MIDI timing clock, start
and stop messages, and active sensing. All of these can be
output by the CME UF series master keyboards.
Tested with a CME UF6 in a desktop Linux environment as
well as on the Zynthian Raspberry Pi based platform.
Signed-off-by: Ricard Wanderlof <ricard2013@butoba.net>
Link: https://patch.msgid.link/20250313-cme-fix-v1-1-d404889e4de8@butoba.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit becc794c5e46f4dfca59f2385f78d83fc9e84700 ]
Lenovo IdeaPad Z570 with NVIDIA GeForce Ge 540M doesn't have sound on
the discrete GPU. The HDA controller in DGPU is disabled by BIOS, but
then reenabled by quirk_nvidia_hda(). The probe fails and ends up with
the "GPU sound probed, but not operational" error.
Add this laptop to DMI-based denylist to prevent probe early. DMI is
used, because the audio device has zero subsystem IDs, and this entry
would be too much, blocking all 540M chips:
PCI_DEVICE_SUB(0x10de, 0x0bea, 0x0000, 0x0000)
Also, this laptop comes in a variety of modifications with different
NVIDIA GPUs, so the DMI check will cover them all.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://patch.msgid.link/20250208214602.39607-3-maxtram95@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b360ba9a4936486380bc30d1eabceb40a714d98 ]
quirk_nvidia_hda() forcefully enables HDA controller on all NVIDIA GPUs,
because some buggy BIOSes leave it disabled. However, some dual-GPU
laptops do not have a functional HDA controller in DGPU, and BIOS
disables it on purpose. After quirk_nvidia_hda() reenables this dummy
HDA controller, attempting to probe it fails at azx_first_init(), which
is too late to cancel the probe, as it happens in azx_probe_continue().
The sna_hda_intel driver calls azx_free() and stops the chip, however,
it stays probed, and from the runtime PM point of view, the device
remains active (it was set as active by the PCI subsystem on probe). It
prevents vga_switcheroo from turning off the DGPU, because
pci_create_device_link() syncs power management for video and audio
devices.
Affected devices should be added to driver_denylist to prevent them from
probing early. This patch helps identify such devices by printing a
warning, and also forces the device to the suspended state to allow
vga_switcheroo turn off DGPU.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://patch.msgid.link/20250208214602.39607-2-maxtram95@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8876fc1884f5b39550c8387ff3176396c988541d ]
Envelope struct is always initialized, but the envelope itself is
optional as described in USB PID Device class definition 1.0.
5.1.1.1 Type Specific Block Offsets
...
4) Effects that do not use Condition Blocks use 1 Parameter Block and
an *optional* Envelope Block.
Sending out "empty" envelope breaks force feedback on some devices with
games that use SINE effect + offset to emulate constant force effect, as
well as generally breaking Constant/Periodic effects. One of the affected
brands is Moza Racing.
This change prevents the envelope from being sent if it contains all
0 values while keeping the old behavior of only sending it, if it differs
from the old one.
Changes in v6:
- Simplify the checks to make them clearer
- Fix possible null pointer dereference while calling
pidff_needs_set_envelope
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37e0591fe44dce39d1ebc7a82d5b6e4dba1582eb ]
Software uses 0 as de-facto infinite lenght on Linux FF apis (SDL),
Linux doesn't actually define anythi as of now, while USB PID defines
NULL (0xffff). Most PID devices do not expect a 0-length effect and
can't interpret it as infinite. This change fixes Force Feedback for
most PID compliant devices.
As most games depend on updating the values of already playing infinite
effects, this is crucial to ensure they will actually work.
Previously, users had to rely on third-party software to do this conversion
and make their PID devices usable.
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcca27bc1eccb9abc2552aab950b18a9742fb8e7 ]
Currently armpmu_add() tries to handle a newly-allocated counter having
a stale associated event, but this should not be possible, and if this
were to happen the current mitigation is insufficient and potentially
expensive. It would be better to warn if we encounter the impossible
case.
Calls to pmu::add() and pmu::del() are serialized by the core perf code,
and armpmu_del() clears the relevant slot in pmu_hw_events::events[]
before clearing the bit in pmu_hw_events::used_mask such that the
counter can be reallocated. Thus when armpmu_add() allocates a counter
index from pmu_hw_events::used_mask, it should not be possible to observe
a stale even in pmu_hw_events::events[] unless either
pmu_hw_events::used_mask or pmu_hw_events::events[] have been corrupted.
If this were to happen, we'd end up with two events with the same
event->hw.idx, which would clash with each other during reprogramming,
deletion, etc, and produce bogus results. Add a WARN_ON_ONCE() for this
case so that we can detect if this ever occurs in practice.
That possiblity aside, there's no need to call arm_pmu::disable(event)
for the new event. The PMU reset code initialises the counter in a
disabled state, and armpmu_del() will disable the counter before it can
be reused. Remove the redundant disable.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250218-arm-brbe-v19-v20-2-4e9922fc2e8e@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4248ee16f411ac1ea7dfab228a6659b111e3d65 ]
When running in a virtual machine, we might see the original hardware CPU
vendor string (i.e. "AuthenticAMD"), but a model and family ID set by the
hypervisor. In case we run on AMD hardware and the hypervisor sets a model
ID < 0x14, the LAHF cpu feature is eliminated from the the list of CPU
capabilities present to circumvent a bug with some BIOSes in conjunction with
AMD K8 processors.
Parsing the flags list from /proc/cpuinfo seems to be happening mostly in
bash scripts and prebuilt Docker containers, as it does not need to have
additionals tools present – even though more reliable ways like using "kcpuid",
which calls the CPUID instruction instead of parsing a list, should be preferred.
Scripts, that use /proc/cpuinfo to determine if the current CPU is
"compliant" with defined microarchitecture levels like x86-64-v2 will falsely
claim the CPU is incapable of modern CPU instructions when "lahf_lm" is missing
in that flags list.
This can prevent some docker containers from starting or build scripts to create
unoptimized binaries.
Admittably, this is more a small inconvenience than a severe bug in the kernel
and the shoddy scripts that rely on parsing /proc/cpuinfo
should be fixed instead.
This patch adds an additional check to see if we're running inside a
virtual machine (X86_FEATURE_HYPERVISOR is present), which, to my
understanding, can't be present on a real K8 processor as it was introduced
only with the later/other Athlon64 models.
Example output with the "lahf_lm" flag missing in the flags list
(should be shown between "hypervisor" and "abm"):
$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 6
model name : Common KVM processor
stepping : 1
microcode : 0x1000065
cpu MHz : 2599.998
cache size : 512 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx rdtscp
lm rep_good nopl cpuid extd_apicid tsc_known_freq pni
pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt
tsc_deadline_timer aes xsave avx f16c hypervisor abm
3dnowprefetch vmmcall bmi1 avx2 bmi2 xsaveopt
... while kcpuid shows the feature to be present in the CPU:
# kcpuid -d | grep lahf
lahf_lm - LAHF/SAHF available in 64-bit mode
[ mingo: Updated the comment a bit, incorporated Boris's review feedback. ]
Signed-off-by: Max Grobecker <max@grobecker.info>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f381640e1bd4f2de7ccafbfe8703d33c3718aad9 ]
... except when the table is known to be only used by one thread.
A file pointer can get installed at any moment despite the ->file_lock
being held since the following:
8a81252b77 ("fs/file.c: don't acquire files->file_lock in fd_install()")
Accesses subject to such a race can in principle suffer load tearing.
While here redo the comment in dup_fd -- it only covered a race against
files showing up, still assuming fd_install() takes the lock.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250313135725.1320914-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38e8844005e6068f336a3ad45451a562a0040ca1 ]
Currently, mtk_iommu calls during probe iommu_device_register before
the hw_list from driver data is initialized. Since iommu probing issue
fix, it leads to NULL pointer dereference in mtk_iommu_device_group when
hw_list is accessed with list_first_entry (not null safe).
So, change the call order to ensure iommu_device_register is called
after the driver data are initialized.
Fixes: 9e3a2a6436 ("iommu/mediatek: Adapt sharing and non-sharing pgtable case")
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # MT8183 Juniper, MT8186 Tentacruel
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250403-fix-mtk-iommu-error-v2-1-fe8b18f8b0a8@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e042ed950d4e176379ba4c0722146cd96fb38aa2 ]
Given a set element like:
icmpv6 . dead:beef:00ff::1
The value of 'ff' is irrelevant, any address will be matched
as long as the other octets are the same.
This is because of too-early register clobbering:
ymm7 is reloaded with new packet data (pkt[9]) but it still holds data
of an earlier load that wasn't processed yet.
The existing tests in nft_concat_range.sh selftests do exercise this code
path, but do not trigger incorrect matching due to the network prefix
limitation.
Fixes: 7400b06396 ("nft_set_pipapo: Introduce AVX2-based lookup implementation")
Reported-by: sontu mazumdar <sontu21@gmail.com>
Closes: https://lore.kernel.org/netfilter/CANgxkqwnMH7fXra+VUfODT-8+qFLgskq3set1cAzqqJaV4iEZg@mail.gmail.com/T/#t
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aabc6596ffb377c4c9c8f335124b92ea282c9821 ]
Ensure we have enough data in linear buffer from skb before accessing
initial bytes. This prevents potential out-of-bounds accesses
when processing short packets.
When ppp_sync_txmung receives an incoming package with an empty
payload:
(remote) gef➤ p *(struct pppoe_hdr *) (skb->head + skb->network_header)
$18 = {
type = 0x1,
ver = 0x1,
code = 0x0,
sid = 0x2,
length = 0x0,
tag = 0xffff8880371cdb96
}
from the skb struct (trimmed)
tail = 0x16,
end = 0x140,
head = 0xffff88803346f400 "4",
data = 0xffff88803346f416 ":\377",
truesize = 0x380,
len = 0x0,
data_len = 0x0,
mac_len = 0xe,
hdr_len = 0x0,
it is not safe to access data[2].
Reported-by: syzbot+29fc8991b0ecb186cf40@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=29fc8991b0ecb186cf40
Tested-by: syzbot+29fc8991b0ecb186cf40@syzkaller.appspotmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Arnaud Lecomte <contact@arnaud-lcm.com>
Link: https://patch.msgid.link/20250408-bound-checking-ppp_txmung-v2-1-94bb6e1b92d0@arnaud-lcm.com
[pabeni@redhat.com: fixed subj typo]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6933cd4714861eea6848f18396a119d741f25fc3 ]
A nexthop is only chosen when the calculated multipath hash falls in the
nexthop's hash region (i.e., the hash is smaller than the nexthop's hash
threshold) and when the nexthop is assigned a non-negative score by
rt6_score_route().
Commit 4d0ab3a6885e ("ipv6: Start path selection from the first
nexthop") introduced an unintentional difference between the first
nexthop and the rest when the score is negative.
When the first nexthop matches, but has a negative score, the code will
currently evaluate subsequent nexthops until one is found with a
non-negative score. On the other hand, when a different nexthop matches,
but has a negative score, the code will fallback to the nexthop with
which the selection started ('match').
Align the behavior across all nexthops and fallback to 'match' when the
first nexthop matches, but has a negative score.
Fixes: 3d709f69a3 ("ipv6: Use hash-threshold instead of modulo-N")
Fixes: 4d0ab3a6885e ("ipv6: Start path selection from the first nexthop")
Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Closes: https://lore.kernel.org/netdev/67efef607bc41_1ddca82948c@willemb.c.googlers.com.notmuch/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250408084316.243559-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3bf8f63e6179076b57c9de660c9f80b5abefe70 ]
It is not sufficient to directly validate the limit on the data that
the user passes as it can be updated based on how the other parameters
are changed.
Move the check at the end of the configuration update process to also
catch scenarios where the limit is indirectly updated, for example
with the following configurations:
tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 depth 1
tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 divisor 1
This fixes the following syzkaller reported crash:
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:203:6
index 65535 is out of range for type 'struct sfq_head[128]'
CPU: 1 UID: 0 PID: 3037 Comm: syz.2.16 Not tainted 6.14.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x201/0x300 lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:231 [inline]
__ubsan_handle_out_of_bounds+0xf5/0x120 lib/ubsan.c:429
sfq_link net/sched/sch_sfq.c:203 [inline]
sfq_dec+0x53c/0x610 net/sched/sch_sfq.c:231
sfq_dequeue+0x34e/0x8c0 net/sched/sch_sfq.c:493
sfq_reset+0x17/0x60 net/sched/sch_sfq.c:518
qdisc_reset+0x12e/0x600 net/sched/sch_generic.c:1035
tbf_reset+0x41/0x110 net/sched/sch_tbf.c:339
qdisc_reset+0x12e/0x600 net/sched/sch_generic.c:1035
dev_reset_queue+0x100/0x1b0 net/sched/sch_generic.c:1311
netdev_for_each_tx_queue include/linux/netdevice.h:2590 [inline]
dev_deactivate_many+0x7e5/0xe70 net/sched/sch_generic.c:1375
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 10685681bafc ("net_sched: sch_sfq: don't allow 1 packet limit")
Signed-off-by: Octavian Purdila <tavip@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c0cea59d40cf6dd13c2950437631dd614fbade6 ]
Many configuration parameters have influence on others (e.g. divisor
-> flows -> limit, depth -> limit) and so it is difficult to correctly
do all of the validation before applying the configuration. And if a
validation error is detected late it is difficult to roll back a
partially applied configuration.
To avoid these issues use a temporary work area to update and validate
the configuration and only then apply the configuration to the
internal state.
Signed-off-by: Octavian Purdila <tavip@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: b3bf8f63e617 ("net_sched: sch_sfq: move the limit validation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b5f0c5bc819af2b0759a8fcddc1b39102735c0f ]
The newly element to be added to the list is the first argument of
list_add_tail. This fix is missing dcfad4ab4d67 ("nvmet-fcloop: swap
the list_add_tail arguments").
Fixes: 437c0b824d ("nvme-fcloop: add target to host LS request support")
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d46a27085039158eb5e253ab8a35a0e33b5e864 ]
The function pdc20621_prog_dimm0() calls the function pdc20621_i2c_read()
but does not handle the error if the read fails. This could lead to
process with invalid data. A proper implementation can be found in
/source/drivers/ata/sata_sx4.c, pdc20621_prog_dimm_global(). As mentioned
in its commit: bb44e154e2, the variable spd0
might be used uninitialized when pdc20621_i2c_read() fails.
Add error handling to pdc20621_i2c_read(). If a read operation fails,
an error message is logged via dev_err(), and return a negative error
code.
Add error handling to pdc20621_prog_dimm0() in pdc20621_dimm_init(), and
return a negative error code if pdc20621_prog_dimm0() fails.
Fixes: 4447d35156 ("libata: convert the remaining SATA drivers to new init model")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 369609fc6272c2f6ad666ba4fd913f3baf32908f ]
The tfilter_notify() and tfilter_del_notify() functions assume that
NLMSG_GOODSIZE is always enough to dump the filter chain. This is not
always the case, which can lead to silent notify failures (because the
return code of tfilter_notify() is not always checked). In particular,
this can lead to NLM_F_ECHO not being honoured even though an action
succeeds, which forces userspace to create workarounds[0].
Fix this by increasing the message size if dumping the filter chain into
the allocated skb fails. Use the size of the incoming skb as a size hint
if set, so we can start at a larger value when appropriate.
To trigger this, run the following commands:
# ip link add type veth
# tc qdisc replace dev veth0 root handle 1: fq_codel
# tc -echo filter add dev veth0 parent 1: u32 match u32 0 0 $(for i in $(seq 32); do echo action pedit munge ip dport set 22; done)
Before this fix, tc just returns:
Not a filter(cmd 2)
After the fix, we get the correct echo:
added filter dev veth0 parent 1: protocol all pref 49152 u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 terminal flowid not_in_hw
match 00000000/00000000 at 0
action order 1: pedit action pass keys 1
index 1 ref 1 bind 1
key #0 at 20: val 00000016 mask ffff0000
[repeated 32 times]
[0] 106ef21860
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Frode Nordahl <frode.nordahl@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/openvswitch/+bug/2018500
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250407105542.16601-1-toke@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93775590b1ee98bf2976b1f4a1ed24e9ff76170f ]
As of today tc-filter/chain events are unconditionally built and sent to
RTNLGRP_TC. As with the introduction of rtnl_notify_needed we can check
before-hand if they are really needed. This will help to alleviate
system pressure when filters are concurrently added without the rtnl
lock as in tc-flower.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20231208192847.714940-8-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 369609fc6272 ("tc: Ensure we have enough buffer space when sending filter netlink notifications")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5e2a973448d958feb7881e4d875eac59fdeff3d ]
As of today, rtnl code creates a new skb and unconditionally fills and
broadcasts it to the relevant group. For most operations this is okay
and doesn't waste resources in general.
When operations are done without the rtnl_lock, as in tc-flower, such
skb allocation, message fill and no-op broadcasting can happen in all
cores of the system, which contributes to system pressure and wastes
precious cpu cycles when no one will receive the built message.
Introduce this helper so rtnetlink operations can simply check if someone
is listening and then proceed if necessary.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20231208192847.714940-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 369609fc6272 ("tc: Ensure we have enough buffer space when sending filter netlink notifications")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5071a1e606b30c0c11278d3c6620cd6a24724cf6 ]
syzbot discovered that it can disconnect a TLS socket and then
run into all sort of unexpected corner cases. I have a vague
recollection of Eric pointing this out to us a long time ago.
Supporting disconnect is really hard, for one thing if offload
is enabled we'd need to wait for all packets to be _acked_.
Disconnect is not commonly used, disallow it.
The immediate problem syzbot run into is the warning in the strp,
but that's just the easiest bug to trigger:
WARNING: CPU: 0 PID: 5834 at net/tls/tls_strp.c:486 tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486
RIP: 0010:tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486
Call Trace:
<TASK>
tls_rx_rec_wait+0x280/0xa60 net/tls/tls_sw.c:1363
tls_sw_recvmsg+0x85c/0x1c30 net/tls/tls_sw.c:2043
inet6_recvmsg+0x2c9/0x730 net/ipv6/af_inet6.c:678
sock_recvmsg_nosec net/socket.c:1023 [inline]
sock_recvmsg+0x109/0x280 net/socket.c:1045
__sys_recvfrom+0x202/0x380 net/socket.c:2237
Fixes: 3c4d755915 ("tls: kernel TLS support")
Reported-by: syzbot+b4cd76826045a1eb93c1@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250404180334.3224206-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69ae94725f4fc9e75219d2d69022029c5b24bc9a ]
In case the backlog transmit queue for system-importance messages is overloaded,
tipc_link_xmit() returns -ENOBUFS but the skb list is not purged. This leads to
memory leak and failure when a skb is allocated.
This commit fixes this issue by purging the skb list before tipc_link_xmit()
returns.
Fixes: 365ad353c2 ("tipc: reduce risk of user starvation during link congestion")
Signed-off-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250403092431.514063-1-tung.quang.nguyen@est.tech
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad320e408a8c95a282ab9c05cdf0c9b95e317985 ]
devm_ioremap() returns NULL on error. Currently, pxa_ata_probe() does
not check for this case, which can result in a NULL pointer dereference.
Add NULL check after devm_ioremap() to prevent this issue.
Fixes: 2dc6c6f15d ("[ARM] pata_pxa: DMA-capable PATA driver")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8a388c1fabeb6606e16467b23242416c0dbeffad upstream.
NFSD sends CB_RECALL_ANY to clients when the server is low on
memory or that client has a large number of delegations outstanding.
We've seen cases where NFSD attempts to send CB_RECALL_ANY requests
to disconnected clients, and gets confused. These calls never go
anywhere if a backchannel transport to the target client isn't
available. Before the server can send any backchannel operation, the
client has to connect first and then do a BIND_CONN_TO_SESSION.
This patch doesn't address the root cause of the confusion, but
there's no need to queue up these optional operations if they can't
go anywhere.
Fixes: 44df6f439a ("NFSD: add delegation reaper to react to low memory condition")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 230ca758453c63bd38e4d9f4a21db698f7abada8 upstream.
Before calling nfsd4_run_cb to queue dl_recall to the callback_wq, we
increment the reference count of dl_stid.
We expect that after the corresponding work_struct is processed, the
reference count of dl_stid will be decremented through the callback
function nfsd4_cb_recall_release.
However, if the call to nfsd4_run_cb fails, the incremented reference
count of dl_stid will not be decremented correspondingly, leading to the
following nfs4_stid leak:
unreferenced object 0xffff88812067b578 (size 344):
comm "nfsd", pid 2761, jiffies 4295044002 (age 5541.241s)
hex dump (first 32 bytes):
01 00 00 00 6b 6b 6b 6b b8 02 c0 e2 81 88 ff ff ....kkkk........
00 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 ad 4e ad de .kkkkkkk.....N..
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfsd4_process_open1+0x34/0x300
nfsd4_open+0x2d1/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
unreferenced object 0xffff8881499f4d28 (size 368):
comm "nfsd", pid 2761, jiffies 4295044005 (age 5541.239s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 30 4d 9f 49 81 88 ff ff ........0M.I....
30 4d 9f 49 81 88 ff ff 20 00 00 00 01 00 00 00 0M.I.... .......
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfs4_alloc_stid+0x29/0x210
alloc_init_deleg+0x92/0x2e0
nfs4_set_delegation+0x284/0xc00
nfs4_open_delegation+0x216/0x3f0
nfsd4_process_open2+0x2b3/0xee0
nfsd4_open+0x770/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
Fix it by checking the result of nfsd4_run_cb and call nfs4_put_stid if
fail to queue dl_recall.
Cc: stable@vger.kernel.org
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f656cfbc7a293a039d6a0c7100e1c846845148c1 upstream.
Syzkaller has reported a general protection fault at function
ir_raw_event_store_with_filter(). This crash is caused by a NULL pointer
dereference of dev->raw pointer, even though it is checked for NULL in
the same function, which means there is a race condition. It occurs due
to the incorrect order of actions in the streamzap_disconnect() function:
rc_unregister_device() is called before usb_kill_urb(). The dev->raw
pointer is freed and set to NULL in rc_unregister_device(), and only
after that usb_kill_urb() waits for in-progress requests to finish.
If rc_unregister_device() is called while streamzap_callback() handler is
not finished, this can lead to accessing freed resources. Thus
rc_unregister_device() should be called after usb_kill_urb().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 8e9e606400 ("V4L/DVB: staging/lirc: port lirc_streamzap to ir-core")
Cc: stable@vger.kernel.org
Reported-by: syzbot+34008406ee9a31b13c73@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=34008406ee9a31b13c73
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8dfb2168906944ea61acfc87846b816eeab882d upstream.
If the file system is corrupted, the header.stblindex variable
may become greater than 127. Because of this, an array access out
of bounds may occur:
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dtree.c:3096:10
index 237 is out of range for type 'struct dtslot[128]'
CPU: 0 UID: 0 PID: 5822 Comm: syz-executor740 Not tainted 6.13.0-rc4-syzkaller-00110-g4099a71718b0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:231 [inline]
__ubsan_handle_out_of_bounds+0x121/0x150 lib/ubsan.c:429
dtReadFirst+0x622/0xc50 fs/jfs/jfs_dtree.c:3096
dtReadNext fs/jfs/jfs_dtree.c:3147 [inline]
jfs_readdir+0x9aa/0x3c50 fs/jfs/jfs_dtree.c:2862
wrap_directory_iterator+0x91/0xd0 fs/readdir.c:65
iterate_dir+0x571/0x800 fs/readdir.c:108
__do_sys_getdents64 fs/readdir.c:403 [inline]
__se_sys_getdents64+0x1e2/0x4b0 fs/readdir.c:389
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
---[ end trace ]---
Add a stblindex check for corruption.
Reported-by: syzbot <syzbot+9120834fc227768625ba@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=9120834fc227768625ba
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdf480da5837c23b146c4743c18de97202fcab37 upstream.
During the "size_check" label in ea_get(), the code checks if the extended
attribute list (xattr) size matches ea_size. If not, it logs
"ea_get: invalid extended attribute" and calls print_hex_dump().
Here, EALIST_SIZE(ea_buf->xattr) returns 4110417968, which exceeds
INT_MAX (2,147,483,647). Then ea_size is clamped:
int size = clamp_t(int, ea_size, 0, EALIST_SIZE(ea_buf->xattr));
Although clamp_t aims to bound ea_size between 0 and 4110417968, the upper
limit is treated as an int, causing an overflow above 2^31 - 1. This leads
"size" to wrap around and become negative (-184549328).
The "size" is then passed to print_hex_dump() (called "len" in
print_hex_dump()), it is passed as type size_t (an unsigned
type), this is then stored inside a variable called
"int remaining", which is then assigned to "int linelen" which
is then passed to hex_dump_to_buffer(). In print_hex_dump()
the for loop, iterates through 0 to len-1, where len is
18446744073525002176, calling hex_dump_to_buffer()
on each iteration:
for (i = 0; i < len; i += rowsize) {
linelen = min(remaining, rowsize);
remaining -= rowsize;
hex_dump_to_buffer(ptr + i, linelen, rowsize, groupsize,
linebuf, sizeof(linebuf), ascii);
...
}
The expected stopping condition (i < len) is effectively broken
since len is corrupted and very large. This eventually leads to
the "ptr+i" being passed to hex_dump_to_buffer() to get closer
to the end of the actual bounds of "ptr", eventually an out of
bounds access is done in hex_dump_to_buffer() in the following
for loop:
for (j = 0; j < len; j++) {
if (linebuflen < lx + 2)
goto overflow2;
ch = ptr[j];
...
}
To fix this we should validate "EALIST_SIZE(ea_buf->xattr)"
before it is utilised.
Reported-by: syzbot <syzbot+4e6e7e4279d046613bc5@syzkaller.appspotmail.com>
Tested-by: syzbot <syzbot+4e6e7e4279d046613bc5@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=4e6e7e4279d046613bc5
Fixes: d9f9d96136cb ("jfs: xattr: check invalid xattr size more strictly")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5e206778e96e8667d3bde695ad372c296dc9353 upstream.
Mounting a corrupted filesystem with directory which contains '.' dir
entry with rec_len == block size results in out-of-bounds read (later
on, when the corrupted directory is removed).
ext4_empty_dir() assumes every ext4 directory contains at least '.'
and '..' as directory entries in the first data block. It first loads
the '.' dir entry, performs sanity checks by calling ext4_check_dir_entry()
and then uses its rec_len member to compute the location of '..' dir
entry (in ext4_next_entry). It assumes the '..' dir entry fits into the
same data block.
If the rec_len of '.' is precisely one block (4KB), it slips through the
sanity checks (it is considered the last directory entry in the data
block) and leaves "struct ext4_dir_entry_2 *de" point exactly past the
memory slot allocated to the data block. The following call to
ext4_check_dir_entry() on new value of de then dereferences this pointer
which results in out-of-bounds mem access.
Fix this by extending __ext4_check_dir_entry() to check for '.' dir
entries that reach the end of data block. Make sure to ignore the phony
dir entries for checksum (by checking name_len for non-zero).
Note: This is reported by KASAN as use-after-free in case another
structure was recently freed from the slot past the bound, but it is
really an OOB read.
This issue was found by syzkaller tool.
Call Trace:
[ 38.594108] BUG: KASAN: slab-use-after-free in __ext4_check_dir_entry+0x67e/0x710
[ 38.594649] Read of size 2 at addr ffff88802b41a004 by task syz-executor/5375
[ 38.595158]
[ 38.595288] CPU: 0 UID: 0 PID: 5375 Comm: syz-executor Not tainted 6.14.0-rc7 #1
[ 38.595298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 38.595304] Call Trace:
[ 38.595308] <TASK>
[ 38.595311] dump_stack_lvl+0xa7/0xd0
[ 38.595325] print_address_description.constprop.0+0x2c/0x3f0
[ 38.595339] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595349] print_report+0xaa/0x250
[ 38.595359] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595368] ? kasan_addr_to_slab+0x9/0x90
[ 38.595378] kasan_report+0xab/0xe0
[ 38.595389] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595400] __ext4_check_dir_entry+0x67e/0x710
[ 38.595410] ext4_empty_dir+0x465/0x990
[ 38.595421] ? __pfx_ext4_empty_dir+0x10/0x10
[ 38.595432] ext4_rmdir.part.0+0x29a/0xd10
[ 38.595441] ? __dquot_initialize+0x2a7/0xbf0
[ 38.595455] ? __pfx_ext4_rmdir.part.0+0x10/0x10
[ 38.595464] ? __pfx___dquot_initialize+0x10/0x10
[ 38.595478] ? down_write+0xdb/0x140
[ 38.595487] ? __pfx_down_write+0x10/0x10
[ 38.595497] ext4_rmdir+0xee/0x140
[ 38.595506] vfs_rmdir+0x209/0x670
[ 38.595517] ? lookup_one_qstr_excl+0x3b/0x190
[ 38.595529] do_rmdir+0x363/0x3c0
[ 38.595537] ? __pfx_do_rmdir+0x10/0x10
[ 38.595544] ? strncpy_from_user+0x1ff/0x2e0
[ 38.595561] __x64_sys_unlinkat+0xf0/0x130
[ 38.595570] do_syscall_64+0x5b/0x180
[ 38.595583] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: ac27a0ec11 ("[PATCH] ext4: initial copy of files from ext3")
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: linux-ext4@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Mahmoud Adam <mngyadam@amazon.com>
Cc: stable@vger.kernel.org
Cc: security@kernel.org
Link: https://patch.msgid.link/b3ae36a6794c4a01944c7d70b403db5b@amazon.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f87d3af7419307ae26e705a2b2db36140db367a2 upstream.
This fixes an analogus bug that was fixed in xfs in commit
4b8d867ca6e2 ("xfs: don't over-report free space or inodes in
statvfs") where statfs can report misleading / incorrect information
where project quota is enabled, and the free space is less than the
remaining quota.
This commit will resolve a test failure in generic/762 which tests for
this bug.
Cc: stable@kernel.org
Fixes: 689c958cbe ("ext4: add project quota support")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e6b3fcc9c5294aeafed0dbe1a09a1bc899bd0f2 upstream.
Lockdep reports this deadlock log:
osnoise: could not start sampling thread
============================================
WARNING: possible recursive locking detected
--------------------------------------------
CPU0
----
lock(cpu_hotplug_lock);
lock(cpu_hotplug_lock);
Call Trace:
<TASK>
print_deadlock_bug+0x282/0x3c0
__lock_acquire+0x1610/0x29a0
lock_acquire+0xcb/0x2d0
cpus_read_lock+0x49/0x120
stop_per_cpu_kthreads+0x7/0x60
start_kthread+0x103/0x120
osnoise_hotplug_workfn+0x5e/0x90
process_one_work+0x44f/0xb30
worker_thread+0x33e/0x5e0
kthread+0x206/0x3b0
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x11/0x20
</TASK>
This is the deadlock scenario:
osnoise_hotplug_workfn()
guard(cpus_read_lock)(); // first lock call
start_kthread(cpu)
if (IS_ERR(kthread)) {
stop_per_cpu_kthreads(); {
cpus_read_lock(); // second lock call. Cause the AA deadlock
}
}
It is not necessary to call stop_per_cpu_kthreads() which stops osnoise
kthread for every other CPUs in the system if a failure occurs during
hotplug of a certain CPU.
For start_per_cpu_kthreads(), if the start_kthread() call fails,
this function calls stop_per_cpu_kthreads() to handle the error.
Therefore, similarly, there is no need to call stop_per_cpu_kthreads()
again within start_kthread().
So just remove stop_per_cpu_kthreads() from start_kthread to solve this issue.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250321095249.2739397-1-ranxiaokai627@163.com
Fixes: c8895e271f ("trace/osnoise: Support hotplug operations")
Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d38328eb442dc06aec4350fd9594ffa6488af02 upstream.
The printk format for synth event uses "%.*s" to print string fields,
but then only passes the pointer part as var arg.
Replace %.*s with %s as the C string is guaranteed to be null-terminated.
The output in print fmt should never have been updated as __get_str()
handles the string limit because it can access the length of the string in
the string meta data that is saved in the ring buffer.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 8db4d6bfbb ("tracing: Change synthetic event string format to limit printed length")
Link: https://lore.kernel.org/20250325165202.541088-1-douglas.raillard@arm.com
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21581dd4e7ff6c07d0ab577e3c32b13a74b31522 upstream.
Currently, using synth_event_delete() will fail if the event is being
used (tracing in progress), but that is normally done in the module exit
function. At that stage, failing is problematic as returning a non-zero
status means the module will become locked (impossible to unload or
reload again).
Instead, ensure the module exit function does not get called in the
first place by increasing the module refcnt when the event is enabled.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 35ca5207c2 ("tracing: Add synthetic event command generation functions")
Link: https://lore.kernel.org/20250318180906.226841-1-douglas.raillard@arm.com
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f81f27b1093e4895e87b74143c59c055c3b1906 upstream.
Kairui reported a UAF issue in print_graph_function_flags() during
ftrace stress testing [1]. This issue can be reproduced if puting a
'mdelay(10)' after 'mutex_unlock(&trace_types_lock)' in s_start(),
and executing the following script:
$ echo function_graph > current_tracer
$ cat trace > /dev/null &
$ sleep 5 # Ensure the 'cat' reaches the 'mdelay(10)' point
$ echo timerlat > current_tracer
The root cause lies in the two calls to print_graph_function_flags
within print_trace_line during each s_show():
* One through 'iter->trace->print_line()';
* Another through 'event->funcs->trace()', which is hidden in
print_trace_fmt() before print_trace_line returns.
Tracer switching only updates the former, while the latter continues
to use the print_line function of the old tracer, which in the script
above is print_graph_function_flags.
Moreover, when switching from the 'function_graph' tracer to the
'timerlat' tracer, s_start only calls graph_trace_close of the
'function_graph' tracer to free 'iter->private', but does not set
it to NULL. This provides an opportunity for 'event->funcs->trace()'
to use an invalid 'iter->private'.
To fix this issue, set 'iter->private' to NULL immediately after
freeing it in graph_trace_close(), ensuring that an invalid pointer
is not passed to other tracers. Additionally, clean up the unnecessary
'iter->private = NULL' during each 'cat trace' when using wakeup and
irqsoff tracers.
[1] https://lore.kernel.org/all/20231112150030.84609-1-ryncsn@gmail.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Link: https://lore.kernel.org/20250320122137.23635-1-wutengda@huaweicloud.com
Fixes: eecb91b9f9 ("tracing: Fix memleak due to race between current_tracer and trace")
Closes: https://lore.kernel.org/all/CAMgjq7BW79KDSCyp+tZHjShSzHsScSiJxn5ffskp-QzVM06fxw@mail.gmail.com/
Reported-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf21e29d78cd2c2371023953d9c82dfef82ebb36 upstream.
Access psid->sub_auth[psid->num_subauth - 1] without checking
if num_subauth is non-zero leads to an out-of-bounds read.
This patch adds a validation step to ensure num_subauth != 0
before sub_auth is accessed.
Cc: stable@vger.kernel.org
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa4cdb8cbca7d6cb6aa13e4d8d83d1103f6345db upstream.
There is a race condition between session setup and
ksmbd_sessions_deregister. The session can be freed before the connection
is added to channel list of session.
This patch check reference count of session before freeing it.
Cc: stable@vger.kernel.org
Reported-by: Sean Heelan <seanheelan@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15a9605f8d69dc85005b1a00c31a050b8625e1aa upstream.
In multichannel mode, UAF issue can occur in session_deregister
when the second channel sets up a session through the connection of
the first channel. session that is freed through the global session
table can be accessed again through ->sessions of connection.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
