[ Upstream commit dd1f1da4ad ]
The value of NSEC_PER_SEC << PWM_DUTY_WIDTH doesn't fix within a 32 bit
integer causing a build warning/error (and the value truncated):
drivers/pwm/pwm-tegra.c: In function ‘tegra_pwm_config’:
drivers/pwm/pwm-tegra.c:148:53: error: result of ‘1000000000 << 8’ requires 39 bits to represent, but ‘long int’ only has 32 bits [-Werror=shift-overflow=]
148 | required_clk_rate = DIV_ROUND_UP_ULL(NSEC_PER_SEC << PWM_DUTY_WIDTH,
| ^~
Explicitly cast to a u64 to ensure the correct result.
Fixes: cfcb68817fb3 ("pwm: tegra: Improve required rate calculation")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3edfd14bb5 upstream.
Previous commit that introduces reference counter does not add proper
comments, which will lead to warning when building htmldocs. Fix them.
Reported-by: "Stephen Rothwell" <sfr@canb.auug.org.au>
Fixes: 0fc044b2b5 ("media: dvbdev: adopts refcnt to avoid UAF")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68ad83188d upstream.
While performing CPU hotplug, a crash with the following stack was seen:
Call Trace:
qla24xx_process_response_queue+0x42a/0x970 [qla2xxx]
qla2x00_start_nvme_mq+0x3a2/0x4b0 [qla2xxx]
qla_nvme_post_cmd+0x166/0x240 [qla2xxx]
nvme_fc_start_fcp_op.part.0+0x119/0x2e0 [nvme_fc]
blk_mq_dispatch_rq_list+0x17b/0x610
__blk_mq_sched_dispatch_requests+0xb0/0x140
blk_mq_sched_dispatch_requests+0x30/0x60
__blk_mq_run_hw_queue+0x35/0x90
__blk_mq_delay_run_hw_queue+0x161/0x180
blk_execute_rq+0xbe/0x160
__nvme_submit_sync_cmd+0x16f/0x220 [nvme_core]
nvmf_connect_admin_queue+0x11a/0x170 [nvme_fabrics]
nvme_fc_create_association.cold+0x50/0x3dc [nvme_fc]
nvme_fc_connect_ctrl_work+0x19/0x30 [nvme_fc]
process_one_work+0x1e8/0x3c0
On abort timeout, completion was called without checking if the I/O was
already completed.
Verify that I/O and abort request are indeed outstanding before attempting
completion.
Fixes: 71c80b75ce ("scsi: qla2xxx: Do command completion on abort timeout")
Reported-by: Marco Patalano <mpatalan@redhat.com>
Tested-by: Marco Patalano <mpatalan@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20221129092634.15347-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 162d053e15 upstream.
If we get -ENOMEM while dropping file extent items in a given range, at
btrfs_drop_extents(), due to failure to allocate memory when attempting to
increment the reference count for an extent or drop the reference count,
we handle it with a BUG_ON(). This is excessive, instead we can simply
abort the transaction and return the error to the caller. In fact most
callers of btrfs_drop_extents(), directly or indirectly, already abort
the transaction if btrfs_drop_extents() returns any error.
Also, we already have error paths at btrfs_drop_extents() that may return
-ENOMEM and in those cases we abort the transaction, like for example
anything that changes the b+tree may return -ENOMEM due to a failure to
allocate a new extent buffer when COWing an existing extent buffer, such
as a call to btrfs_duplicate_item() for example.
So replace the BUG_ON() calls with proper logic to abort the transaction
and return the error.
Reported-by: syzbot+0b1fb6b0108c27419f9f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000089773e05ee4b9cb4@google.com/
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cb3543cff9 upstream.
When updating the operating mode as part of regulator enable, the caller
has already locked the regulator tree and drms_uA_update() must not try
to do the same in order not to trigger a deadlock.
The lock inversion is reported by lockdep as:
======================================================
WARNING: possible circular locking dependency detected
6.1.0-next-20221215 #142 Not tainted
------------------------------------------------------
udevd/154 is trying to acquire lock:
ffffc11f123d7e50 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x54/0x280
but task is already holding lock:
ffff80000e4c36e8 (regulator_ww_class_acquire){+.+.}-{0:0}, at: regulator_enable+0x34/0x80
which lock already depends on the new lock.
...
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(regulator_ww_class_acquire);
lock(regulator_list_mutex);
lock(regulator_ww_class_acquire);
lock(regulator_list_mutex);
*** DEADLOCK ***
just before probe of a Qualcomm UFS controller (occasionally) deadlocks
when enabling one of its regulators.
Fixes: 9243a195be ("regulator: core: Change voltage setting path")
Fixes: f8702f9e4a ("regulator: core: Use ww_mutex for regulators locking")
Cc: stable@vger.kernel.org # 5.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221215104646.19818-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 572302af12 upstream.
Commit 57fe60df62 ("reiserfs: add atomic addition of selinux attributes
during inode creation") defined reiserfs_security_free() to free the name
and value of a security xattr allocated by the active LSM through
security_old_inode_init_security(). However, this function is not called
in the reiserfs code.
Thus, add a call to reiserfs_security_free() whenever
reiserfs_security_init() is called, and initialize value to NULL, to avoid
to call kfree() on an uninitialized pointer.
Finally, remove the kfree() for the xattr name, as it is not allocated
anymore.
Fixes: 57fe60df62 ("reiserfs: add atomic addition of selinux attributes during inode creation")
Cc: stable@vger.kernel.org
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d6a9fb87e9 upstream.
A bad bug in clang's implementation of -fzero-call-used-regs can result
in NULL pointer dereferences (see the links above the check for more
information). Restrict CONFIG_CC_HAS_ZERO_CALL_USED_REGS to either a
supported GCC version or a clang newer than 15.0.6, which will catch
both a theoretical 15.0.7 and the upcoming 16.0.0, which will both have
the bug fixed.
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221214232602.4118147-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26273ade77 upstream.
When a new request is allocated, the refcount will be zero if it is
reused, but if the request is newly allocated from slab, it is not fully
initialized before being added to idr.
If the p9_read_work got a response before the refcount initiated. It will
use a uninitialized req, which will result in a bad request data struct.
Here is the logs from syzbot.
Corrupted memory at 0xffff88807eade00b [ 0xff 0x07 0x00 0x00 0x00 0x00
0x00 0x00 . . . . . . . . ] (in kfence-#110):
p9_fcall_fini net/9p/client.c:248 [inline]
p9_req_put net/9p/client.c:396 [inline]
p9_req_put+0x208/0x250 net/9p/client.c:390
p9_client_walk+0x247/0x540 net/9p/client.c:1165
clone_fid fs/9p/fid.h:21 [inline]
v9fs_fid_xattr_set+0xe4/0x2b0 fs/9p/xattr.c:118
v9fs_xattr_set fs/9p/xattr.c:100 [inline]
v9fs_xattr_handler_set+0x6f/0x120 fs/9p/xattr.c:159
__vfs_setxattr+0x119/0x180 fs/xattr.c:182
__vfs_setxattr_noperm+0x129/0x5f0 fs/xattr.c:216
__vfs_setxattr_locked+0x1d3/0x260 fs/xattr.c:277
vfs_setxattr+0x143/0x340 fs/xattr.c:309
setxattr+0x146/0x160 fs/xattr.c:617
path_setxattr+0x197/0x1c0 fs/xattr.c:636
__do_sys_setxattr fs/xattr.c:652 [inline]
__se_sys_setxattr fs/xattr.c:648 [inline]
__ia32_sys_setxattr+0xc0/0x160 fs/xattr.c:648
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178
do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203
entry_SYSENTER_compat_after_hwframe+0x70/0x82
Below is a similar scenario, the scenario in the syzbot log looks more
complicated than this one, but this patch can fix it.
T21124 p9_read_work
======================== second trans =================================
p9_client_walk
p9_client_rpc
p9_client_prepare_req
p9_tag_alloc
req = kmem_cache_alloc(p9_req_cache, GFP_NOFS);
tag = idr_alloc
<< preempted >>
req->tc.tag = tag;
/* req->[refcount/tag] == uninitialized */
m->rreq = p9_tag_lookup(m->client, m->rc.tag);
/* increments uninitalized refcount */
refcount_set(&req->refcount, 2);
/* cb drops one ref */
p9_client_cb(req)
/* reader thread drops its ref:
request is incorrectly freed */
p9_req_put(req)
/* use after free and ref underflow */
p9_req_put(req)
To fix it, we can initialize the refcount to zero before add to idr.
Link: https://lkml.kernel.org/r/20221201033310.18589-1-schspa@gmail.com
Cc: stable@vger.kernel.org # 6.0+ due to 6cda12864c ("9p: Drop kref usage")
Fixes: 728356dede ("9p: Add refcount to p9_req_t")
Reported-by: syzbot+8f1060e2aaf8ca55220b@syzkaller.appspotmail.com
Signed-off-by: Schspa Shi <schspa@gmail.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85c5019771 upstream.
Currently, the max_loop commandline argument can be used to specify how
many loop block devices are created at init time. If it is not
specified on the commandline, CONFIG_BLK_DEV_LOOP_MIN_COUNT loop block
devices will be created.
The max_loop commandline argument can be used to override the value of
CONFIG_BLK_DEV_LOOP_MIN_COUNT. However, when max_loop is set to 0
through the commandline, the current logic treats it as if it had not
been set, and creates CONFIG_BLK_DEV_LOOP_MIN_COUNT devices anyway.
Fix this by starting max_loop off as set to CONFIG_BLK_DEV_LOOP_MIN_COUNT.
This preserves the intended behavior of creating
CONFIG_BLK_DEV_LOOP_MIN_COUNT loop block devices if the max_loop
commandline parameter is not specified, and allowing max_loop to
be respected for all values, including 0.
This allows environments that can create all of their required loop
block devices on demand to not have to unnecessarily preallocate loop
block devices.
Fixes: 7328508274 ("remove artificial software max_loop limit")
Cc: stable@vger.kernel.org
Cc: Ken Chen <kenchen@google.com>
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Link: https://lore.kernel.org/r/20221208212902.765781-1-isaacmanjarres@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1db1f39259 upstream.
Some Wacom devices have a special "bootloader" mode that is used for
firmware flashing. When operating in this mode, the device cannot be
used for input, and the HID descriptor is not able to be processed by
the driver. The driver generates an "Unknown device_type" warning and
then returns an error code from wacom_probe(). This is a problem because
userspace still needs to be able to interact with the device via hidraw
to perform the firmware flash.
This commit adds a non-generic device definition for 056a:0094 which
is used when devices are in "bootloader" mode. It marks the devices
with a special BOOTLOADER type that is recognized by wacom_probe() and
wacom_raw_event(). When we see this type we ensure a hidraw device is
created and otherwise keep our hands off so that userspace is in full
control.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63130462c9 upstream.
Since commit 0f01017191 ("usb: dwc3: Don't switch OTG -> peripheral
if extcon is present"), Dual Role support on Intel Merrifield platform
broke due to rearranging the call to dwc3_get_extcon().
It appears to be caused by ulpi_read_id() masking the timeout on the first
test write. In the past dwc3 probe continued by calling dwc3_core_soft_reset()
followed by dwc3_get_extcon() which happend to return -EPROBE_DEFER.
On deferred probe ulpi_read_id() finally succeeded. Due to above mentioned
rearranging -EPROBE_DEFER is not returned and probe completes without phy.
On Intel Merrifield the timeout on the first test write issue is reproducible
but it is difficult to find the root cause. Using a mainline kernel and
rootfs with buildroot ulpi_read_id() succeeds. As soon as adding
ftrace / bootconfig to find out why, ulpi_read_id() fails and we can't
analyze the flow. Using another rootfs ulpi_read_id() fails even without
adding ftrace. We suspect the issue is some kind of timing / race, but
merely retrying ulpi_read_id() does not resolve the issue.
As we now changed ulpi_read_id() to return -ETIMEDOUT in this case, we
need to handle the error by calling dwc3_core_soft_reset() and request
-EPROBE_DEFER. On deferred probe ulpi_read_id() is retried and succeeds.
Fixes: ef6a7bcfb0 ("usb: ulpi: Support device discovery via DT")
Cc: stable@vger.kernel.org
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221205201527.13525-3-ftoth@exalondelft.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 62c73bfea0 upstream.
dwc->desired_dr_role is changed by dwc3_set_mode inside a spinlock but
then read by __dwc3_set_mode outside of that lock. This can lead to a
race condition when very quick successive role switch events happen:
CPU A
dwc3_set_mode(DWC3_GCTL_PRTCAP_HOST) // first role switch event
spin_lock_irqsave(&dwc->lock, flags);
dwc->desired_dr_role = mode; // DWC3_GCTL_PRTCAP_HOST
spin_unlock_irqrestore(&dwc->lock, flags);
queue_work(system_freezable_wq, &dwc->drd_work);
CPU B
__dwc3_set_mode
// ....
spin_lock_irqsave(&dwc->lock, flags);
// desired_dr_role is DWC3_GCTL_PRTCAP_HOST
dwc3_set_prtcap(dwc, dwc->desired_dr_role);
spin_unlock_irqrestore(&dwc->lock, flags);
CPU A
dwc3_set_mode(DWC3_GCTL_PRTCAP_DEVICE) // second event
spin_lock_irqsave(&dwc->lock, flags);
dwc->desired_dr_role = mode; // DWC3_GCTL_PRTCAP_DEVICE
spin_unlock_irqrestore(&dwc->lock, flags);
CPU B (continues running __dwc3_set_mode)
switch (dwc->desired_dr_role) { // DWC3_GCTL_PRTCAP_DEVICE
// ....
case DWC3_GCTL_PRTCAP_DEVICE:
// ....
ret = dwc3_gadget_init(dwc);
We then have DWC3_GCTL.DWC3_GCTL_PRTCAPDIR = DWC3_GCTL_PRTCAP_HOST and
dwc->current_dr_role = DWC3_GCTL_PRTCAP_HOST but initialized the
controller in device mode. It's also possible to get into a state
where both host and device are intialized at the same time.
Fix this race by creating a local copy of desired_dr_role inside
__dwc3_set_mode while holding dwc->lock.
Fixes: 41ce1456e1 ("usb: dwc3: core: make dwc3_set_mode() work properly")
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20221128161526.79730-1-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8d8840c72 upstream.
When adding support for the DisplayPort part of the QMP PHY the binding
(and devicetree parser) for the (USB) child node was simply reused and
this has lead to some confusion.
The third DP register region is really the DP_PHY region, not "PCS" as
the binding claims, and lie at offset 0x2a00 (not 0x2c00).
Similarly, there likely are no "RX", "RX2" or "PCS_MISC" regions as
there are for the USB part of the PHY (and in any case the Linux driver
does not use them).
Note that the sixth "PCS_MISC" region is not even in the binding.
Fixes: 5aa0d1becd ("arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode")
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111094729.11842-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d57378d3aa ]
Currently ima_lsm_copy_rule() set the arg_p field of the source rule to
NULL, so that the source rule could be freed afterward. It does not make
sense for this behavior to be inside a "copy" function. So move it
outside and let the caller handle this field.
ima_lsm_copy_rule() now produce a shallow copy of the original entry
including args_p field. Meaning only the lsm.rule and the rule itself
should be freed for the original rule. Thus, instead of calling
ima_lsm_free_rule() which frees lsm.rule as well as args_p field, free
the lsm.rule directly.
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36f82c93ee ]
The afs_fs_probe_dispatcher() work function is passed a count on
net->servers_outstanding when it is scheduled (which may come via its
timer). This is passed back to the work_item, passed to the timer or
dropped at the end of the dispatcher function.
But, at the top of the dispatcher function, there are two checks which
skip the rest of the function: if the network namespace is being destroyed
or if there are no fileservers to probe. These two return paths, however,
do not drop the count passed to the dispatcher, and so, sometimes, the
destruction of a network namespace, such as induced by rmmod of the kafs
module, may get stuck in afs_purge_servers(), waiting for
net->servers_outstanding to become zero.
Fix this by adding the missing decrements in afs_fs_probe_dispatcher().
Fixes: f6cbb368bc ("afs: Actively poll fileservers to maintain NAT or firewall openings")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/167164544917.2072364.3759519569649459359.stgit@warthog.procyon.org.uk/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c900dcc3f ]
For some reason rt5670_i2c_probe() does a pm_runtime_put() at the end
of a successful probe. But it has never done a pm_runtime_get() leading
to the following error being logged into dmesg:
rt5670 i2c-10EC5640:00: Runtime PM usage count underflow!
Fix this by removing the unnecessary pm_runtime_put().
Fixes: 64e89e5f55 ("ASoC: rt5670: Add runtime PM support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221213123319.11285-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
