In some SoCs, setting noreboot bit needs modification to
PMC GC registers. But not all PMC drivers allow other drivers
to memory map their GC region. This could create mem request
conflict in watchdog driver. So this patch adds facility to allow
PMC drivers to pass noreboot update function to watchdog
drivers via platform data.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
iTCO_wdt no_reboot_bit set/unset functions has lot of common code between
them. So merging these two functions into a single update function would
remove these unnecessary code duplications. This patch fixes this issue
by creating a no_reboot_bit update function to handle both set/unset
functions.
Also checking for iTCO version every time you make no_reboot_bit set/unset
call is inefficient and makes the code look complex. This can be improved
by performing this check once during device probe and selecting the
appropriate no_reboot_bit update function. This patch fixes this issue
by splitting the update function into multiple helper functions.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This patch adds API's to read/write/update PMC GC registers.
PMC dependent devices like iTCO_wdt, Telemetry has requirement
to acces GCR registers. These API's can be used for this
purpose.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
According to Broxton APL spec, PMC MIMO resources for Global Control
Registers(GCR) are located at 4K(0x1000) offset from IPC base address.
In this driver, PLAT_RESOURCE_GCR_OFFSET macro defines the offset of GCR
region base address from IPC base address and its current value of
0x1008 is incorrect because it points to location for PMC_CFG register
and not the GCR base address itself.
GCR Base = IPC1 Base + 0x1000.
This patch fixes this offset issue.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When changing keyboard backlight state on new Dell laptops, firmware
expects a new timeout AC value filled in Set New State SMBIOS call.
Without it any change of keyboard backlight state on new Dell laptops
fails. And user can see following error message in dmesg:
dell_laptop: Setting old previous keyboard state failed
leds dell::kbd_backlight: Setting an LED's brightness failed (-6)
This patch adds support for retrieving current timeout AC values and also
updating them. Current timeout value in sysfs is displayed based on current
AC status, like current display brightness value.
Detection if Dell laptop supports or not new timeout AC settings is done by
checking existence of Keyboard Backlight with AC SMBIOS token (0x0451).
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Mario Limonciello <mario.limonciello@dell.com>
Tested-by: Arcadiy Ivanov <arcadiy@ivanov.biz>
[andy: fixed merge conflict with defined constants]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Johannes Berg says:
====================
Another set of patches for -next:
* API support for concurrent scheduled scan requests
* API changes for roaming reporting
* BSS max idle support in mac80211
* API changes for TX status reporting in mac80211
* API changes for RX rate reporting in mac80211
* rewrite monitor logic to prepare for BPF filters
* bugfix for rare devices without 2.4 GHz support
* a bugfix for recent DFS changes
* some further cleanups
The API changes are actually at a nice time, since it's
typically quiet just before the merge window, and trees
can be synchronized easily during it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 80f5b5e700 ("KVM: remove vm mmap method"), the VM mmap
handler is gone. Remove the corresponding documentation.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull input fix from Dmitry Torokhov:
"Yet another quirk to i8042 to get touchpad recognized on some laptops"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add Clevo P650RS to the i8042 reset list
Commit 6c0afb5039 ("clk: ti: convert to use proper register
definition for all accesses") converted all register accesses in
the TI clk driver to use a proper struct instead of a void
pointer casted struct that fits into a u32. Unfortunately, it
missed a conversion here in the didivder code, leading to a
compiler warning like so:
drivers/clk/ti/divider.c: In function 'ti_clk_register_divider':
drivers/clk/ti/divider.c:460:8: error: 'reg' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Treating a 'u32' variable as a structure leads to a stack
overflow here, and the register address we pass down is never
initialized. Convert this part of the code as well so things
work properly.
Fixes: 6c0afb5039 ("clk: ti: convert to use proper register definition for all accesses")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[sboyd@codeaurora.org: Fixed fixes tag, rewrote commit message,
s/reg_setup/reg/]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
SA will query and cache class port info as part of
its initialization. SA will also invalidate and
refresh the cache based on specific events. Callers such
as IPoIB and CM can query the SA to get the classportinfo
information. Apart from making the caller code much simpler,
this change puts the onus on the SA to query and maintain
classportinfo much like how it maitains the address handle to the SM.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The process_ecn intends to return a bool value. However it is doing
so incorrectly by ANDing the fecn mask. The fecn bit is bit 31. Bool is
not a native data type and is up to the compiler to implement how it
sees fit. It is conceivable that this upper bit gets washed out.
Fix by converting to a bool properly.
Cc: stable@vger.kernel.org
Fixes: Commit fd2b562edca6 ("IB/hfi1: Pull FECN/BECN processing to a common place")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add missing braces around else blocks in a few places to make checkpatch
happy.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
According to checkpatch %Lx is not standard C so remove it and use the
suggested %llx.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Checkpatch flagged a misspelled word. Fix it.
Fixes: 8764522e52 ("staging/rdma/hfi1: Unexpected link up pkey values are not an error")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ingress and egress port P_Key checking should always be performed for
HFIs. This patch will enable ingress and egress P_Key checking when
the port is initialized and will ignore the P_Key information sent by
the FM in the port info structure which is meant to be used only by the
switch.
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Neel Desai <neel.desai@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Secure data is transferred across the link during verify
cap. This includes Neighbor Guid, Type, and Port Number.
This transfer is not guaranteed to complete until the 8051
firmware has completed processing of the state_complete
frame. Move the consumption of this data from verify cap
handling to link up handling to ensure the data is finalized.
Additionally, do not notify the SM that the link is up until
after this data is actually available.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Stuart Summers <john.s.summers@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The driver progress routines can call cond_resched() when
a timeslice is exhausted and irqs are enabled.
If the ULP had been holding a spin lock without disabling irqs and
the post send directly called the progress routine, the cond_resched()
could yield allowing another thread from the same ULP to deadlock
on that same lock.
Correct by replacing the current hfi1_do_send() calldown with a unique
one for post send and adding an argument to hfi1_do_send() to indicate
that the send engine is running in a thread. If the routine is not
running in a thread, avoid calling cond_resched().
CC: <stable@vger.kernel.org> # 4.7.x-
Fixes: Commit 831464ce4b ("IB/hfi1: Don't call cond_resched in atomic mode when sending packets")
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
VL15 in the SC2VL table is used to indicate an invalid SC
for the FM, however, internally the driver remaps SCs from
VL15 to ILLEGAL_VL to prevent error counts. This mapping
confuses the FM when performing a sweep, making it return
a table mismatch error. Have SMA convert ILLEGAL_VL
to VL15 entries for the SC2VL table queries.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The Infiniband spec defines "A multicast address is defined by a
MGID and a MLID" (section 10.5).
The current code only uses the MGID for identifying multicast groups.
Update the driver to be compliant with this definition.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The FM uses the values of MulticastMask and CollectiveMask to
determine the number of bits for net masks. The current values of
0 and 0 are incorrect. The values should be 4 and 1. Updated the
necessary code to reflect the specified values.
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When the base driver is enabled but all SoC specific drivers are turned
off, we now get a build error after code was added to always refer to the
clk gates:
drivers/clk/built-in.o: In function `ccu_pll_notifier_cb':
:(.text+0x154f8): undefined reference to `ccu_gate_helper_disable'
:(.text+0x15504): undefined reference to `ccu_gate_helper_enable'
This changes the Kconfig to always require the gate code to be built-in
when CONFIG_SUNXI_CCU is set.
Fixes: 02ae2bc6fe ("clk: sunxi-ng: Add clk notifier to gate then ungate PLL clocks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
A list of MGID/MLID pairs is built when doing a multicast attach. When
the multicast detach is called, the list is searched, and regardless of
the search outcome, the driver detach is called.
If an MGID/MLID pair is not on the list, driver detach should not be
called, and an error should be returned. Calling the driver without
removing an MGID/MLID pair from the list can leave the core and driver
out of sync.
Fixes: f4e401562c ("IB/uverbs: track multicast group membership for userspace QPs")
Cc: stable@vger.kernel.org
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use setup_timer() instead of init_timer() to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use setup_timer() instead of init_timer() to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use setup_timer() instead of init_timer() to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pull btrfs fix from Chris Mason:
"We have one more fix for btrfs.
This gets rid of a new WARN_ON from rc1 that ended up making more
noise than we really want. The larger fix for the underflow got
delayed a bit and it's better for now to put it under
CONFIG_BTRFS_DEBUG"
* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: qgroup: move noisy underflow warning to debugging build
Fix mismatch between types, wqe_words are in le32 format, while opcode
in CPU format.
The following sparse warnings are helped to find it:
drivers/infiniband/hw/nes/nes_hw.c:3058:24: warning: incorrect type in assignment (different base types)
drivers/infiniband/hw/nes/nes_hw.c:3058:24: expected unsigned int [unsigned] [assigned] [usertype] opcode
drivers/infiniband/hw/nes/nes_hw.c:3058:24: got restricted __le32 <noident>
CC: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Simplify code in find_free_vf_and_create_qp_grp() to avoid sparse error
regarding call to unlock in the block other than lock was called.
drivers/infiniband/hw/usnic/usnic_ib_verbs.c:206:9: warning: context imbalance
in 'find_free_vf_and_create_qp_grp' - different lock
contexts for basic block
CC: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sparse tool complains about undeclared symbols in usnic_ib_verbs.c
and usnic_ib_sysfs.c This is caused by lack of direct include of
appropriate usnic_ib_verbs.h and usnic_ib_sysfs.h, where all
these functions were declared.
Simple include eliminates 30 warnings similar to the below one:
drivers/infiniband/hw/usnic/usnic_ib_sysfs.c:304:6: warning: symbol
'usnic_ib_sysfs_unregister_usdev' was
not declared. Should it be static?
CC: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Functions declared in uverbs_std_types.c are local to that file, but
they lack static declarations. This produces a lot of sparse warnings,
like the one below:
drivers/infiniband/core/uverbs_std_types.c:41:5: warning: symbol
'uverbs_free_ah' was not declared.
Should it be static?
So mark them as static.
CC: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Function alloc_skb() will return a NULL pointer when there is no enough
memory. However, the return value of alloc_skb() is directly used
without validation in function send_fw_pass_open_req(). This patches
checks the return value of alloc_skb() against NULL.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
pnfs_error_mark_layout_for_return needs to check that the layout is
valid before calling pnfs_set_plh_return_info().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the RPC slot was interrupted and server replied to the next
operation on the "reused" slot with ERR_DELAY, don't clear out
the "interrupted" flag until we properly recover.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Function xdr_inline_decode() will return a NULL pointer if the input
buffer does not have long enough buffer to decode nbytes of data.
However, in function decode_op_map(), the return value of
xdr_inline_decode() is not validated before it is used. This patch adds
a check to the return value of xdr_inline_decode().
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
