[ Upstream commit 955c1532a3 ]
If kzalloc() returns NULL, the error path doesn't stop the flow of
control from entering rtw_hal_read_chip_version() which dereferences the
null pointer. Fix this by adding a 'goto' to the error path to more
gracefully handle the issue and avoid proceeding with initialization
steps that we're no longer prepared to handle.
Also update the debug message to be more consistent with the other debug
messages in this function.
Addresses-Coverity: ("Dereference after null check")
Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com>
Link: https://lore.kernel.org/r/20190927214415.899-1-connor.kuehl@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bdfd9f118 ]
The Intel fixed counters use a special table to override the JSON
information.
During this override the period information from the JSON file got
dropped, which results in inst_retired.any and similar running with
frequency mode instead of a period.
Just specify the expected period in the table.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20190927233546.11533-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e98df280bc ]
When the LBR data and the instructions in a binary do not match the loop
printing instructions could get confused and print a long stream of
bogus <bad> instructions.
The problem was that if the instruction decoder cannot decode an
instruction it ilen wasn't initialized, so the loop going through the
basic block would continue with the previous value.
Harden the code to avoid such problems:
- Make sure ilen is always freshly initialized and is 0 for bad
instructions.
- Do not overrun the code buffer while printing instructions
- Print a warning message if the final jump is not on an instruction
boundary.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20190927233546.11533-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee212d6ea2 ]
Whenever an mmap/mmap2 event occurs, the map tree must be updated to add a new
entry. If a new map overlaps a previous map, the overlapped section of the
previous map is effectively unmapped, but the non-overlapping sections are
still valid.
maps__fixup_overlappings() is responsible for creating any new map entries from
the previously overlapped map. It optionally creates a before and an after map.
When creating the after map the existing code failed to adjust the map.pgoff.
This meant the new after map would incorrectly calculate the file offset
for the ip. This results in incorrect symbol name resolution for any ip in the
after region.
Make maps__fixup_overlappings() correctly populate map.pgoff.
Add an assert that new mapping matches old mapping at the beginning of
the after map.
Committer-testing:
Validated correct parsing of libcoreclr.so symbols from .NET Core 3.0 preview9
(which didn't strip symbols).
Preparation:
~/dotnet3.0-preview9/dotnet new webapi -o perfSymbol
cd perfSymbol
~/dotnet3.0-preview9/dotnet publish
perf record ~/dotnet3.0-preview9/dotnet \
bin/Debug/netcoreapp3.0/publish/perfSymbol.dll
^C
Before:
perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\
grep libcoreclr.so | head -n 4
dotnet 1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \
r-xp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.705249: 250000 cpu-clock: \
7fe6159a1f99 [unknown] \
(.../3.0.0-preview9-19423-09/libcoreclr.so)
After:
perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\
grep libcoreclr.so | head -n 4
dotnet 1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \
r-xp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
All the [unknown] symbols were resolved.
Signed-off-by: Steve MacLean <Steve.MacLean@Microsoft.com>
Tested-by: Brian Robbins <brianrob@microsoft.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: John Keeping <john@metanate.com>
Cc: John Salem <josalem@microsoft.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom McDonald <thomas.mcdonald@microsoft.com>
Link: http://lore.kernel.org/lkml/BN8PR21MB136270949F22A6A02335C238F7800@BN8PR21MB1362.namprd21.prod.outlook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3e2cf3d5b ]
An optimized build such as:
make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-O3
will turn the dereference operation into a ud2 instruction, raising a
SIGILL rather than a SIGSEGV. Use raise(..) for correctness and clarity.
Similar issues were addressed in Numfor Mbiziwo-Tiapo's patch:
https://lkml.org/lkml/2019/7/8/1234
Committer testing:
Before:
[root@quaco ~]# perf test hooks
55: perf hooks : Ok
[root@quaco ~]# perf test -v hooks
55: perf hooks :
--- start ---
test child forked, pid 17092
SIGSEGV is observed as expected, try to recover.
Fatal error (SEGFAULT) in perf hook 'test'
test child finished with 0
---- end ----
perf hooks: Ok
[root@quaco ~]#
After:
[root@quaco ~]# perf test hooks
55: perf hooks : Ok
[root@quaco ~]# perf test -v hooks
55: perf hooks :
--- start ---
test child forked, pid 17909
SIGSEGV is observed as expected, try to recover.
Fatal error (SEGFAULT) in perf hook 'test'
test child finished with 0
---- end ----
perf hooks: Ok
[root@quaco ~]#
Fixes: a074865e60 ("perf tools: Introduce perf hooks")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20190925195924.152834-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c59a962e0 ]
The center temperature of the supported devices stored in the constant
BMC150_ACCEL_TEMP_CENTER_VAL is not 24 degrees but 23 degrees.
It seems that some datasheets were inconsistent on this value leading
to the error. For most usecases will only make minor difference so
not queued for stable.
Signed-off-by: Pascal Bouwmann <bouwmann@tau-tec.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de10ac4759 ]
meson_saradc's irq handler uses priv->regmap so make sure that it is
allocated before the irq get enabled.
This also fixes crash when CONFIG_DEBUG_SHIRQ is enabled, as device
managed resources are freed in the inverted order they had been
allocated, priv->regmap was freed before the spurious fake irq that
CONFIG_DEBUG_SHIRQ adds called the handler.
Fixes: 3af109131b ("iio: adc: meson-saradc: switch from polling to interrupt mode")
Reported-by: Elie Roudninski <xademax@gmail.com>
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Elie ROUDNINSKI <xademax@gmail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 252fbeb86c ]
Explicitly cancel/sync the irq_work delayed work, otherwise
there's a chance that it will run after the device is removed,
which would result in a use-after-free.
Note that cancel/sync should happen:
- after irq's have been disabled, as the isr re-schedules the work
- before the power supply is unregistered, because the work func
uses the power supply handle.
Cc: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 342a0ee70a ]
There is no need to hold the register lock while requesting the GPIO
interrupt. By not holding it we can also avoid a false positive
lockdep splat.
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e589291f4 ]
A malicious/clueless root user can use EXT4_IOC_SWAP_BOOT to force a
corner casew which can lead to the file system getting corrupted.
There's no usefulness to allowing this, so just prohibit this case.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6ef4e0e28 ]
The init sequence for ALC294 headphone stuff is needed not only for
the boot up time but also for the resume from hibernation, where the
device is switched from the boot kernel without sound driver to the
suspended image. Since we record the PM event in the device
power_state field, we can now recognize the call pattern and apply the
sequence conditionally.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb1bccb60c ]
There are a couple places where we still account for 4 bytes
in the beginning of SMB2 packet which is not true in the current
code. Fix this to use a header preamble size where possible.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a0fb340fc ]
Current code incorrectly specifies a completion wait timeout duration in 5
jiffies, when it should have been 5 seconds.
Fix the adjust for units for the completion timeout call.
[mkp: manual merge]
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48ebab31d4 ]
The LAG port collecting (receive) function was mistakenly set when the
port was registered as a LAG member, while it should be set only when
the port collection state is set to true. Set LAG port to collecting
when it is set to distributing, as described in the IEEE link
aggregation standard coupled control mux machine state diagram.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 189927e719 ]
Add support for specifying the xtal load capacitance in the DT node.
The pcf8523 supports xtal load capacitance of 7pF or 12.5pF.
If the rtc has the wrong configuration the time will
drift several hours/week.
The driver use the default value 12.5pF.
The DT may specify either 7000fF or 12500fF.
(The DT uses femto Farad to avoid decimal numbers).
Other values are warned and the driver uses the default value.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fdc1790e6 ]
On plug-in of my USB-C device, its USB_SS_PORT_LS_SS_INACTIVE
link state bit is set. Greping all the kernel for this bit shows
that the port status requests a warm-reset this way.
This just happens, if its the only device on the root hub, the hub
therefore resumes and the HCDs status_urb isn't yet available.
If a warm-reset request is detected, this sets the hubs event_bits,
which will prevent any auto-suspend and allows the hubs workqueue
to warm-reset the port later in port_event.
Signed-off-by: Jan-Marek Glogowski <glogow@fbihome.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 202e69e645 ]
XMOS/Thesycon family of USB Audio Class firmware flags DSD altsetting
separate from the PCM ones. Thus the DSD altsetting can be auto-detected
based on the flag and doesn't need maintaining specific altsetting
whitelist.
In addition, static VID:PID-to-altsetting whitelisting causes problems
when firmware update changes the altsetting, or same VID:PID is reused
for another device that has different kind of firmware.
This patch removes existing explicit whitelist mappings for XMOS VID
(0x20b1) and Thesycon VID (0x152a).
Also corrects placement of Hegel HD12 and NuPrime DAC-10 to keep list
sorted based on VID.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acbfa6c26f ]
We must wait until End Transfer completes in order to clear
DWC3_EP_TRANSFER_STARTED, otherwise we may confuse the driver.
This patch is in preparation to fix a rare race condition that happens
upon Disconnect Interrupt.
Tested-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f45581f5e ]
There is a rare race condition that may happen during a Disconnect
Interrupt if we have a started request that happens to be
dequeued *after* completion of End Transfer command. If that happens,
that request will be left waiting for completion of an End Transfer
command that will never happen.
If End Transfer command has already completed before, we are safe to
giveback the request straight away.
Tested-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d59dd69d55 ]
When NULL pointer accidentally passed to write_kprobe_events,
due to strlen(NULL), segmentation fault happens.
Changed code returns -1 to deal with this situation.
Bug issued with Smatch, static analysis.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b538cc213 ]
When using this driver with the wireless dongle and some usermode
program that monitors every input device (acpid, for example), while
another usermode client opens and closes the low-level device
repeadedly, the system eventually deadlocks.
The reason is that steam_input_register_device() must not be called with
the mutex held, because the input subsystem has its own synchronization
that clashes with this one: it is possible that steam_input_open() is
called before input_register_device() returns, and since
steam_input_open() needs to lock the mutex, it deadlocks.
However we must hold the mutex when calling any function that sends
commands to the controller. If not, random commands end up falling fail.
Reported-by: Simon Gene Gottlieb <simon@gottliebtfreitag.de>
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Tested-by: Simon Gene Gottlieb <simon@gottliebtfreitag.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf28aee292 ]
There is a new firmware for the Steam Controller with support for BLE
connections. When using such a device with a wired connection, it
reboots itself every 10 seconds unless an application has opened it.
Doing hid_hw_open() unconditionally on probe fixes the issue, and the
code becomes simpler.
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a767ffea05 ]
Add ASUS Transbook T100CHI/T90CHI keyboard dock into battery quirk list, in
order to add specific implementation in hid-asus.
Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ca1f90861 ]
Instead of reimplement afunction to do 'dt_node_to_map' task like
'rt2880_pinctrl_dt_node_to_map' make use of 'pinconf_generic_dt_node_to_map_all'
generic function for this task. Also use its equivalent function for free which
is 'pinconf_generic_dt_free_map'. Remove 'rt2880_pinctrl_dt_node_to_map' function
which is not needed anymore. This decrease a bit driver LOC and make it more
generic. To properly compile this changes 'GENERIC_PINCONF' option is selected
with the driver in its Kconfig file.
This also fix a problem with function 'rt2880_pinctrl_dt_node_to_map' which was
calling internally 'pinctrl_utils_reserve_map' which expects 'num_maps' to be initialized.
It does a memory allocation based on the value, and triggers the following
warning if is not properly set:
if (unlikely(order >= MAX_ORDER)) {
WARN_ON_ONCE(!(gfp_mask & __GFP_NOWARN));
return NULL;
}
Generic function 'pinconf_generic_dt_node_to_map_all' initializes properly
'num_maps' to zero fixing the problem.
Fixes: e12a1a6e08 ("staging: mt7621-pinctrl: refactor rt2880_pinctrl_dt_node_to_map function")
Reported-by: NeilBrown <neil@brown.name>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff64dd4857 ]
git-diff-index does not refresh the index for you, so using it for a
"-dirty" check can give misleading results. Commit 6147b1cf19
("scripts/setlocalversion: git: Make -dirty check more robust") tried to
fix this by switching to git-status, but it overlooked the fact that
git-status also writes to the .git directory of the source tree, which
is definitely not kosher for an out-of-tree (O=) build. That is getting
reverted.
Fortunately, git-status now supports avoiding writing to the index via
the --no-optional-locks flag, as of git 2.14. It still calculates an
up-to-date index, but it avoids writing it out to the .git directory.
So, let's retry the solution from commit 6147b1cf19 using this new
flag first, and if it fails, we assume this is an older version of git
and just use the old git-diff-index method.
It's hairy to get the 'grep -vq' (inverted matching) correct by stashing
the output of git-status (you have to be careful about the difference
betwen "empty stdin" and "blank line on stdin"), so just pipe the output
directly to grep and use a regex that's good enough for both the
git-status and git-diff-index version.
Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Genki Sky <sky@genki.is>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b627f616e ]
The registered clks should unregister when something wrong happens
before going out in function clk_boston_setup().
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a31061833 ]
We lose even config space access when we power gate the ISP
via the PUNIT. That makes lspci & co. produce gibberish.
To fix that let's try to implement actual runtime pm hooks
and inform the pci core that the device always goes to
D3cold. That will cause the pci core to resume the device
before attempting config space access.
This introduces another annoyance though. We get the
following error every time we try to resume the device:
intel_atomisp2_pm 0000:00:03.0: Refused to change power state, currently in D3
The reason being that the pci core tries to put the device
back into D0 via the standard PCI PM mechanism before
calling the driver resume hook. To fix this properly
we'd need to infiltrate the platform pm hooks (could
turn ugly real fast), or use pm domains (which don't
seem to exist on x86), or some extra early resume
hook for the driver (which doesn't exist either).
So maybe we just choose to live with the error?
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1475af255e ]
While using Elan touchpads, the message floods:
[ 136.138487] i2c_hid i2c-DELL08D6:00: i2c_hid_get_input: incomplete report (14/65535)
Though the message flood is annoying, the device it self works without
any issue. I suspect that the device in question takes too much time to
pull the IRQ back to high after I2C host has done reading its data.
Since the host receives all useful data, let's ignore the input report
when there's no data.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86c31524b2 ]
LG touchscreen (1fd2:8001) stops working after reboot:
[ 4.859153] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66)
[ 4.936070] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66)
[ 9.948224] i2c_hid i2c-SAPS2101:00: failed to reset device.
The device in question stops working after receives SLEEP, ON, SLEEP
commands in a short period. The scenario is like this:
- Once the desktop session closes, it also closed the hid device, so the
device gets runtime suspended and receives a SLEEP command.
- Before calling shutdown callback, it gets runtime resumed and received
an ON command.
- In the shutdown callback, it receives another SLEEP command.
I failed to find a reliable interval between ON/SLEEP commands that can
make it work, so let's simply disable runtime PM for the device.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29edbc3ebd ]
Set types bitmap:ipmac and hash:ipmac check that MAC addresses
are not all zeroes.
Introduce one missing check, and make the remaining ones
consistent, using is_zero_ether_addr() instead of comparing
against an array containing zeroes.
This was already done for hash:mac sets in commit 26c97c5d8d
("netfilter: ipset: Use is_zero_ether_addr instead of static and
memcmp").
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4222ea7100 ]
When we are writing out a free space cache, during the transaction commit
phase, we can end up in a deadlock which results in a stack trace like the
following:
schedule+0x28/0x80
btrfs_tree_read_lock+0x8e/0x120 [btrfs]
? finish_wait+0x80/0x80
btrfs_read_lock_root_node+0x2f/0x40 [btrfs]
btrfs_search_slot+0xf6/0x9f0 [btrfs]
? evict_refill_and_join+0xd0/0xd0 [btrfs]
? inode_insert5+0x119/0x190
btrfs_lookup_inode+0x3a/0xc0 [btrfs]
? kmem_cache_alloc+0x166/0x1d0
btrfs_iget+0x113/0x690 [btrfs]
__lookup_free_space_inode+0xd8/0x150 [btrfs]
lookup_free_space_inode+0x5b/0xb0 [btrfs]
load_free_space_cache+0x7c/0x170 [btrfs]
? cache_block_group+0x72/0x3b0 [btrfs]
cache_block_group+0x1b3/0x3b0 [btrfs]
? finish_wait+0x80/0x80
find_free_extent+0x799/0x1010 [btrfs]
btrfs_reserve_extent+0x9b/0x180 [btrfs]
btrfs_alloc_tree_block+0x1b3/0x4f0 [btrfs]
__btrfs_cow_block+0x11d/0x500 [btrfs]
btrfs_cow_block+0xdc/0x180 [btrfs]
btrfs_search_slot+0x3bd/0x9f0 [btrfs]
btrfs_lookup_inode+0x3a/0xc0 [btrfs]
? kmem_cache_alloc+0x166/0x1d0
btrfs_update_inode_item+0x46/0x100 [btrfs]
cache_save_setup+0xe4/0x3a0 [btrfs]
btrfs_start_dirty_block_groups+0x1be/0x480 [btrfs]
btrfs_commit_transaction+0xcb/0x8b0 [btrfs]
At cache_save_setup() we need to update the inode item of a block group's
cache which is located in the tree root (fs_info->tree_root), which means
that it may result in COWing a leaf from that tree. If that happens we
need to find a free metadata extent and while looking for one, if we find
a block group which was not cached yet we attempt to load its cache by
calling cache_block_group(). However this function will try to load the
inode of the free space cache, which requires finding the matching inode
item in the tree root - if that inode item is located in the same leaf as
the inode item of the space cache we are updating at cache_save_setup(),
we end up in a deadlock, since we try to obtain a read lock on the same
extent buffer that we previously write locked.
So fix this by using the tree root's commit root when searching for a
block group's free space cache inode item when we are attempting to load
a free space cache. This is safe since block groups once loaded stay in
memory forever, as well as their caches, so after they are first loaded
we will never need to read their inode items again. For new block groups,
once they are created they get their ->cached field set to
BTRFS_CACHE_FINISHED meaning we will not need to read their inode item.
Reported-by: Andrew Nelson <andrew.s.nelson@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAPTELenq9x5KOWuQ+fa7h1r3nsJG8vyiTH8+ifjURc_duHh2Wg@mail.gmail.com/
Fixes: 9d66e233c7 ("Btrfs: load free space cache if it exists")
Tested-by: Andrew Nelson <andrew.s.nelson@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 742bbe1ee3 ]
Currently the Switchtec quirk runs on all endpoints in the switch,
including all the upstream and downstream ports. These other functions do
not contain BARs, so the quirk fails when trying to map the BAR and prints
the error "Cannot iomap Switchtec device". The user will see a few of
these useless and scary errors, one for each port in the switch.
At most, the quirk should only run on either a management endpoint
(PCI_CLASS_MEMORY_OTHER) or an NTB endpoint (PCI_CLASS_BRIDGE_OTHER).
However, the quirk is useless except in NTB applications, so we will
only run it when the class is PCI_CLASS_BRIDGE_OTHER.
Switch to using DECLARE_PCI_FIXUP_CLASS_FINAL and only match
PCI_CLASS_BRIDGE_OTHER.
Reported-by: Stephen Bates <sbates@raithlin.com>
Fixes: ad281ecf1c ("PCI: Add DMA alias quirk for Microsemi Switchtec NTB")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
[bhelgaas: split SWITCHTEC_QUIRK() introduction to separate patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Doug Meyer <dmeyer@gigaio.com>
Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
