[ Upstream commit 33da70bd1e115d7d73f45fb1c09f5ecc448f3f13 ]
DC supports SW i2c as well. Drop the check.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 667b96134c9e206aebe40985650bf478935cbe04 ]
Some chips have a larger VBIOS file so raise the size limit to support
the flashing tool.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a7810c212bcf2f722671dadf4b23ff70a7d23ee ]
[Why]
It's possible to generate more than 50 steps in hwss_build_fast_sequence,
for example with a 6-pipe asic where all pipes are in one MPC chain. This
overflows the block_sequence buffer and corrupts block_sequence_steps,
causing a crash.
[How]
Expand block_sequence to 100 items. A naive upper bound on the possible
number of steps for a 6-pipe asic, ignoring the potential for steps to be
mutually exclusive, is 91 with current code, therefore 100 is sufficient.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8c782cac5007e68e7484d420168f12d3490def6 ]
[Why & How]
The initial setting for psr_version is not correct while
create a virtual link.
The default psr_version should be DC_PSR_VERSION_UNSUPPORTED.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a7fde433231c18164c117592d3e18ced648ad58 ]
[Why]
DP spec updated to have the CR AUX RD interval match the EQ AUX RD
interval interpretation of DPCD 0000Eh/0220Eh for 8b/10b non-LTTPR mode
and LTTPR transparent mode cases.
[How]
Update interpretation of DPCD 0000Eh/0220Eh for CR AUX RD interval
during 8b/10b link training.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e92f3f94cad24154fd3baae30c6dfb918492278d ]
Reset psp->cmd to NULL after releasing the buffer in function psp_sw_fini().
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8bffa52e0253cfd689813a620e64521256bc712 ]
[Why]
Setting link DPMS off in response to HPD disconnect creates AUX
transactions on a link that is supposed to be disconnected. This can
cause issues in some cases when the sink re-asserts HPD and expects
source to re-enable the link.
[How]
Avoid AUX transactions on disconnected link.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3394b1f76d3f8adf695ceed350a5dae49003eb37 ]
SDMA writes has to probe invalidate RW lines. Set snoop bit in mmhub for
this to happen.
v2: Missed a few mmhub_v9_4. Added now.
v3: Calculate hub offset once since it doesn't change inside the loop
Modified function names based on review comments.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcc48a73eae7f791b1a6856ea1bcc4079282c88d ]
During runtime suspend scenario, SoundWire wake should be enabled and
during system level suspend scenario SoundWire wake should be disabled.
Implement the SoundWire wake enable/disable sequence as per design flow
for SoundWire poweroff mode.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20250207065841.4718-2-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22a6984c5b5df8eab864d7f3e8b94d5a554d31ab ]
The Renesas RZ/G3S supports a power saving mode where power to most of the
SoC components is turned off. When returning from this power saving mode,
SoC components need to be re-configured.
The SCIFs on the Renesas RZ/G3S need to be re-configured as well when
returning from this power saving mode. The sh-sci code already configures
the SCIF clocks, power domain and registers by calling uart_resume_port()
in sci_resume(). On suspend path the SCIF UART ports are suspended
accordingly (by calling uart_suspend_port() in sci_suspend()). The only
missing setting is the reset signal. For this assert/de-assert the reset
signal on driver suspend/resume.
In case the no_console_suspend is specified by the user, the registers need
to be saved on suspend path and restore on resume path. To do this the
sci_console_save()/sci_console_restore() functions were added. There is no
need to cache/restore the status or FIFO registers. Only the control
registers. The registers that will be saved/restored on suspend/resume are
specified by the struct sci_suspend_regs data structure.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250207113313.545432-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ae891b826958b60919ea21c727f77bcd6ffcc2c ]
The old default value for slice is 0.75 msec * (1 + ilog(ncpus)) which
means that we have a default slice of:
0.75 for 1 cpu
1.50 up to 3 cpus
2.25 up to 7 cpus
3.00 for 8 cpus and above.
For HZ=250 and HZ=100, because of the tick accuracy, the runtime of
tasks is far higher than their slice.
For HZ=1000 with 8 cpus or more, the accuracy of tick is already
satisfactory, but there is still an issue that tasks will get an extra
tick because the tick often arrives a little faster than expected. In
this case, the task can only wait until the next tick to consider that it
has reached its deadline, and will run 1ms longer.
vruntime + sysctl_sched_base_slice = deadline
|-----------|-----------|-----------|-----------|
1ms 1ms 1ms 1ms
^ ^ ^ ^
tick1 tick2 tick3 tick4(nearly 4ms)
There are two reasons for tick error: clockevent precision and the
CONFIG_IRQ_TIME_ACCOUNTING/CONFIG_PARAVIRT_TIME_ACCOUNTING. with
CONFIG_IRQ_TIME_ACCOUNTING every tick will be less than 1ms, but even
without it, because of clockevent precision, tick still often less than
1ms.
In order to make scheduling more precise, we changed 0.75 to 0.70,
Using 0.70 instead of 0.75 should not change much for other configs
and would fix this issue:
0.70 for 1 cpu
1.40 up to 3 cpus
2.10 up to 7 cpus
2.8 for 8 cpus and above.
This does not guarantee that tasks can run the slice time accurately
every time, but occasionally running an extra tick has little impact.
Signed-off-by: zihan zhou <15645113830zzh@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20250208075322.13139-1-15645113830zzh@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a243e1b814a02ab40793026ef64223155d86395 ]
If regmap_read() fails, random stack value was used in calculating new
frequency in recalc_rate() callbacks. Such failure is really not
expected as these are all MMIO reads, however code should be here
correct and bail out. This also avoids possible warning on
uninitialized value.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250212-b4-clk-qcom-clean-v3-1-499f37444f5d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a6f18f28627e121bd1f74b5fcc9f945d6dbeb1e ]
GCC can see that the value range for "order" is capped, but this leads
it to consider that it might be negative, leading to a false positive
warning (with GCC 15 with -Warray-bounds -fdiagnostics-details):
../drivers/net/ethernet/mellanox/mlx4/alloc.c:691:47: error: array subscript -1 is below array bounds of 'long unsigned int *[2]' [-Werror=array-bounds=]
691 | i = find_first_bit(pgdir->bits[o], MLX4_DB_PER_PAGE >> o);
| ~~~~~~~~~~~^~~
'mlx4_alloc_db_from_pgdir': events 1-2
691 | i = find_first_bit(pgdir->bits[o], MLX4_DB_PER_PAGE >> o); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | | | | (2) out of array bounds here
| (1) when the condition is evaluated to true In file included from ../drivers/net/ethernet/mellanox/mlx4/mlx4.h:53,
from ../drivers/net/ethernet/mellanox/mlx4/alloc.c:42:
../include/linux/mlx4/device.h:664:33: note: while referencing 'bits'
664 | unsigned long *bits[2];
| ^~~~
Switch the argument to unsigned int, which removes the compiler needing
to consider negative values.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250210174504.work.075-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91d6a99acfa5ce9f95ede775074b80f7193bd717 ]
Memset the config argument to get_mbus_config V4L2 sub-device pad
operation to zero before calling the operation. This ensures the callers
don't need to bother with it nor the implementations need to set all
fields that may not be relevant to them.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7fb50cecff9cad19fdac5b37337eae4e42b94c7 ]
This reverts commit ccfd889acb
The indicated commit
* does not describe the problem that change tries to solve
* has programming issues
* introduces a bug: forever clears NETLBL_SECATTR_MLS_CAT
in (struct smack_known *)skp->smk_netlabel.flags
Reverting the commit to reapproach original problem
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a158a937d864d0034fea14913c1f09c6d5f574b8 ]
If SMACK label has CIPSO representation w/o categories, e.g.:
| # cat /smack/cipso2
| foo 10
| @ 250/2
| ...
then SMACK does not recognize such CIPSO in input ipv4 packets
and substitues '*' label instead. Audit records may look like
| lsm=SMACK fn=smack_socket_sock_rcv_skb action=denied
| subject="*" object="_" requested=w pid=0 comm="swapper/1" ...
This happens in two steps:
1) security/smack/smackfs.c`smk_set_cipso
does not clear NETLBL_SECATTR_MLS_CAT
from (struct smack_known *)skp->smk_netlabel.flags
on assigning CIPSO w/o categories:
| rcu_assign_pointer(skp->smk_netlabel.attr.mls.cat, ncats.attr.mls.cat);
| skp->smk_netlabel.attr.mls.lvl = ncats.attr.mls.lvl;
2) security/smack/smack_lsm.c`smack_from_secattr
can not match skp->smk_netlabel with input packet's
struct netlbl_lsm_secattr *sap
because sap->flags have not NETLBL_SECATTR_MLS_CAT (what is correct)
but skp->smk_netlabel.flags have (what is incorrect):
| if ((sap->flags & NETLBL_SECATTR_MLS_CAT) == 0) {
| if ((skp->smk_netlabel.flags &
| NETLBL_SECATTR_MLS_CAT) == 0)
| found = 1;
| break;
| }
This commit sets/clears NETLBL_SECATTR_MLS_CAT in
skp->smk_netlabel.flags according to the presense of CIPSO categories.
The update of smk_netlabel is not atomic, so input packets processing
still may be incorrect during short time while update proceeds.
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c98868e816209e568c9d72023ba0bc1e4d96e611 ]
Cross case in pinctrl framework make impossible to an hogged pin and
another, not hogged, used within the same device-tree node. For example
with this simplified device-tree :
&pinctrl {
pinctrl_pin_1: pinctrl-pin-1 {
pins = "dummy-pinctrl-pin";
};
};
&rtc {
pinctrl-names = "default"
pinctrl-0 = <&pinctrl_pin_1 &rtc_pin_1>
rtc_pin_1: rtc-pin-1 {
pins = "dummy-rtc-pin";
};
};
"pinctrl_pin_1" configuration is never set. This produces this path in
the code:
really_probe()
pinctrl_bind_pins()
| devm_pinctrl_get()
| pinctrl_get()
| create_pinctrl()
| pinctrl_dt_to_map()
| // Hog pin create an abort for all pins of the node
| ret = dt_to_map_one_config()
| | /* Do not defer probing of hogs (circular loop) */
| | if (np_pctldev == p->dev->of_node)
| | return -ENODEV;
| if (ret)
| goto err
|
call_driver_probe()
stm32_rtc_probe()
pinctrl_enable()
pinctrl_claim_hogs()
create_pinctrl()
for_each_maps(maps_node, i, map)
// Not hog pin is skipped
if (pctldev && strcmp(dev_name(pctldev->dev),
map->ctrl_dev_name))
continue;
At the first call of create_pinctrl() the hogged pin produces an abort to
avoid a defer of hogged pins. All other pin configurations are trashed.
At the second call, create_pinctrl is now called with pctldev parameter to
get hogs, but in this context only hogs are set. And other pins are
skipped.
To handle this, do not produce an abort in the first call of
create_pinctrl(). Classic pin configuration will be set in
pinctrl_bind_pins() context. And the hogged pin configuration will be set
in pinctrl_claim_hogs() context.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/20250116170009.2075544-1-valentin.caron@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c3b5f37409682184669457a5bdf761268eafbe5 ]
The ASoC convention is that clocks are removed after codec mute, and
power up/down is more about top level power management. For these chips,
the "mute" state still expects a TDM clock, and yanking the clock in
this state will trigger clock errors. So, do the full
shutdown<->mute<->active transition on the mute operation, so the amp is
in software shutdown by the time the clocks are removed.
This fixes TDM clock errors when streams are stopped.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250208-asoc-tas2764-v1-1-dbab892a69b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efff6a7f16b34fd902f342b58bd8bafc2d6f2fd1 ]
When the firmware compatibility was handled previously in the commit
8e3f9da608 ("firmware: arm_ffa: Handle compatibility with different firmware versions"),
we only addressed firmware versions that have higher minor versions
compared to the driver version which is should be considered compatible
unless the firmware returns NOT_SUPPORTED.
However, if the firmware reports higher major version than the driver
supported, we need to reject it. If the firmware can work in a compatible
mode with the driver requested version, it must return the same major
version as requested.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-12-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 633f16d7e07c129a36b882c05379e01ce5bdb542 ]
In the sensor_count field of the MTEWE register, bits 1-62 are
supported only for unmanaged switches, not for NICs, and bit 63
is reserved for internal use.
To prevent confusing output that may include set bits that are
not relevant to NIC sensors, we update the bitmask to retain only
the first bit, which corresponds to the sensor ASIC.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250213094641.226501-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4740118b752005cbed339aec9a1d1c43620e0b9 ]
Artem reported that the CPU load was 100% when capturing from
vivid at low resolution with ffmpeg.
This was caused by:
while (time_is_after_jiffies(cur_jiffies + wait_jiffies) &&
!kthread_should_stop())
schedule();
If there are no other processes running that can be scheduled,
then this is basically a busy-loop.
Change it to wait_event_interruptible_timeout() which doesn't
have that problem.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219570
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d42d543368343c0449a4e433b5f02e063a86209c ]
When a vxlan netdevice is brought up, if its default remote is a multicast
address, the device joins the indicated group.
Therefore when the multicast remote address changes, the device should
leave the current group and subscribe to the new one. Similarly when the
interface used for endpoint communication is changed in a situation when
multicast remote is configured. This is currently not done.
Both vxlan_igmp_join() and vxlan_igmp_leave() can however fail. So it is
possible that with such fix, the netdevice will end up in an inconsistent
situation where the old group is not joined anymore, but joining the new
group fails. Should we join the new group first, and leave the old one
second, we might end up in the opposite situation, where both groups are
joined. Undoing any of this during rollback is going to be similarly
problematic.
One solution would be to just forbid the change when the netdevice is up.
However in vnifilter mode, changing the group address is allowed, and these
problems are simply ignored (see vxlan_vni_update_group()):
# ip link add name br up type bridge vlan_filtering 1
# ip link add vx1 up master br type vxlan external vnifilter local 192.0.2.1 dev lo dstport 4789
# bridge vni add dev vx1 vni 200 group 224.0.0.1
# tcpdump -i lo &
# bridge vni add dev vx1 vni 200 group 224.0.0.2
18:55:46.523438 IP 0.0.0.0 > 224.0.0.22: igmp v3 report, 1 group record(s)
18:55:46.943447 IP 0.0.0.0 > 224.0.0.22: igmp v3 report, 1 group record(s)
# bridge vni
dev vni group/remote
vx1 200 224.0.0.2
Having two different modes of operation for conceptually the same interface
is silly, so in this patch, just do what the vnifilter code does and deal
with the errors by crossing fingers real hard.
The vnifilter code leaves old before joining new, and in case of join /
leave failures does not roll back the configuration changes that have
already been applied, but bails out of joining if it could not leave. Do
the same here: leave before join, apply changes unconditionally and do not
attempt to join if we couldn't leave.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cccf6ee090c8c133072d5d5b52ae25f3bc907a16 ]
When the HED driver is built-in, it initializes after evged because they
both are at the same initcall level, so the initialization ordering
depends on the Makefile order. However, this prevents RAS records
coming in between the evged driver initialization and the HED driver
initialization from being handled.
If the number of such RAS records is above the APEI HEST error source
number, the HEST resources may be exhausted, and that may affect
subsequent RAS error reporting.
To fix this issue, change the initcall level of HED to subsys_initcall
and prevent the driver from being built as a module by changing ACPI_HED
in Kconfig from "tristate" to "bool".
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Link: https://patch.msgid.link/20250212063408.927666-1-tanxiaofei@huawei.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fdeafd66edaf420ea0063a1f13442fe3470fe70 ]
mlx4 doesn't support ndo_xdp_xmit / XDP_REDIRECT and wasn't
using page pool until now, so it could run XDP completions
in netpoll (NAPI budget == 0) just fine. Page pool has calling
context requirements, make sure we don't try to call it from
what is potentially HW IRQ context.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250213010635.1354034-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 486055f5e09df959ad4e3aa4ee75b5c91ddeec2e ]
A single scatter-gather entry is limited by a 32 bits "length" field
that is practically 4GB - PAGE_SIZE. This means that even when the
memory is physically contiguous, we might need more than one entry to
represent it. Additionally when using dmabuf, the sg_table might be
originated outside the subsystem and optimized for other needs.
For instance an SGT of 16GB GPU continuous memory might look like this:
(a real life example)
dma_address 34401400000, length fffff000
dma_address 345013ff000, length fffff000
dma_address 346013fe000, length fffff000
dma_address 347013fd000, length fffff000
dma_address 348013fc000, length 4000
Since ib_umem_find_best_pgsz works within SG entries, in the above case
we will result with the worst possible 4KB page size.
Fix this by taking into consideration only the alignment of addresses of
real discontinuity points rather than treating SG entries as such, and
adjust the page iterator to correctly handle cross SG entry pages.
There is currently an assumption that drivers do not ask for pages
bigger than maximal DMA size supported by their devices.
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20250217141623.12428-1-mrgolin@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bd2aad57da95f7f2d2bb52f7ad15c0f4993a685 ]
The following splat has been observed on a SAMA5D27 platform using
atmel_serial:
BUG: sleeping function called from invalid context at kernel/irq/manage.c:738
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 27, name: kworker/u5:0
preempt_count: 1, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
hardirqs last enabled at (0): [<00000000>] 0x0
hardirqs last disabled at (0): [<c01588f0>] copy_process+0x1c4c/0x7bec
softirqs last enabled at (0): [<c0158944>] copy_process+0x1ca0/0x7bec
softirqs last disabled at (0): [<00000000>] 0x0
CPU: 0 UID: 0 PID: 27 Comm: kworker/u5:0 Not tainted 6.13.0-rc7+ #74
Hardware name: Atmel SAMA5
Workqueue: hci0 hci_power_on [bluetooth]
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x44/0x70
dump_stack_lvl from __might_resched+0x38c/0x598
__might_resched from disable_irq+0x1c/0x48
disable_irq from mctrl_gpio_disable_ms+0x74/0xc0
mctrl_gpio_disable_ms from atmel_disable_ms.part.0+0x80/0x1f4
atmel_disable_ms.part.0 from atmel_set_termios+0x764/0x11e8
atmel_set_termios from uart_change_line_settings+0x15c/0x994
uart_change_line_settings from uart_set_termios+0x2b0/0x668
uart_set_termios from tty_set_termios+0x600/0x8ec
tty_set_termios from ttyport_set_flow_control+0x188/0x1e0
ttyport_set_flow_control from wilc_setup+0xd0/0x524 [hci_wilc]
wilc_setup [hci_wilc] from hci_dev_open_sync+0x330/0x203c [bluetooth]
hci_dev_open_sync [bluetooth] from hci_dev_do_open+0x40/0xb0 [bluetooth]
hci_dev_do_open [bluetooth] from hci_power_on+0x12c/0x664 [bluetooth]
hci_power_on [bluetooth] from process_one_work+0x998/0x1a38
process_one_work from worker_thread+0x6e0/0xfb4
worker_thread from kthread+0x3d4/0x484
kthread from ret_from_fork+0x14/0x28
This warning is emitted when trying to toggle, at the highest level,
some flow control (with serdev_device_set_flow_control) in a device
driver. At the lowest level, the atmel_serial driver is using
serial_mctrl_gpio lib to enable/disable the corresponding IRQs
accordingly. The warning emitted by CONFIG_DEBUG_ATOMIC_SLEEP is due to
disable_irq (called in mctrl_gpio_disable_ms) being possibly called in
some atomic context (some tty drivers perform modem lines configuration
in regions protected by port lock).
Split mctrl_gpio_disable_ms into two differents APIs, a non-blocking one
and a blocking one. Replace mctrl_gpio_disable_ms calls with the
relevant version depending on whether the call is protected by some port
lock.
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Acked-by: Richard Genoud <richard.genoud@bootlin.com>
Link: https://lore.kernel.org/r/20250217-atomic_sleep_mctrl_serial_gpio-v3-1-59324b313eef@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6571bef25fe48c642f7a69ccf7c3198b317c136a ]
[Why]
eDP may not be connected to the GPU on driver start causing
fail enumeration.
[How]
Move the virtual signal type check before the eDP connector
signal check.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c29dfd661fe2f8d1b48c7f00590929c04b25bf40 ]
gcc-14 produces a bogus warning in some configurations:
drivers/edac/ie31200_edac.c: In function 'ie31200_probe1.isra':
drivers/edac/ie31200_edac.c:412:26: error: 'dimm_info' is used uninitialized [-Werror=uninitialized]
412 | struct dimm_data dimm_info[IE31200_CHANNELS][IE31200_DIMMS_PER_CHANNEL];
| ^~~~~~~~~
drivers/edac/ie31200_edac.c:412:26: note: 'dimm_info' declared here
412 | struct dimm_data dimm_info[IE31200_CHANNELS][IE31200_DIMMS_PER_CHANNEL];
| ^~~~~~~~~
I don't see any way the unintialized access could really happen here,
but I can see why the compiler gets confused by the two loops.
Instead, rework the two nested loops to only read the addr_decode
registers and then keep only one instance of the dimm info structure.
[Tony: Qiuxu pointed out that the "populate DIMM info" comment was left
behind in the refactor and suggested moving it. I deleted the comment
as unnecessry in front os a call to populate_dimm_info(). That seems
pretty self-describing.]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20250122065031.1321015-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3128b0a2e0cf6e07aa78e5f8cf7dd9cd59dc8174 ]
In multi-cluster MIPS I6500 systems there is a GIC in each cluster,
each with its own counter. When a cluster powers up the counter will
be stopped, with the COUNTSTOP bit set in the GIC_CONFIG register.
In single cluster systems, it has been fine to clear COUNTSTOP once
in gic_clocksource_of_init() to start the counter. In multi-cluster
systems, this will only have started the counter in the boot cluster,
and any CPUs in other clusters will find their counter stopped which
will break the GIC clock_event_device.
Resolve this by having CPUs clear the COUNTSTOP bit when they come
online, using the existing gic_starting_cpu() CPU hotplug callback. This
will allow CPUs in secondary clusters to ensure that the cluster's GIC
counter is running as expected.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Chao-ying Fu <cfu@wavecomp.com>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
