commit a7b8e876e0ef0232b8076972c57ce9a7286b47ca upstream.
The netlink response for RDMA_NL_LS_OP_IP_RESOLVE should always have a
LS_NLA_TYPE_DGID attribute, it is invalid if it does not.
Use the nl parsing logic properly and call nla_parse_deprecated() to fill
the nlattrs array and then directly index that array to get the data for
the DGID. Just fail if it is NULL.
Remove the for loop searching for the nla, and squash the validation and
parsing into one function.
Fixes an uninitialized read from the stack triggered by userspace if it
does not provide the DGID to a kernel initiated RDMA_NL_LS_OP_IP_RESOLVE
query.
BUG: KMSAN: uninit-value in hex_byte_pack include/linux/hex.h:13 [inline]
BUG: KMSAN: uninit-value in ip6_string+0xef4/0x13a0 lib/vsprintf.c:1490
hex_byte_pack include/linux/hex.h:13 [inline]
ip6_string+0xef4/0x13a0 lib/vsprintf.c:1490
ip6_addr_string+0x18a/0x3e0 lib/vsprintf.c:1509
ip_addr_string+0x245/0xee0 lib/vsprintf.c:1633
pointer+0xc09/0x1bd0 lib/vsprintf.c:2542
vsnprintf+0xf8a/0x1bd0 lib/vsprintf.c:2930
vprintk_store+0x3ae/0x1530 kernel/printk/printk.c:2279
vprintk_emit+0x307/0xcd0 kernel/printk/printk.c:2426
vprintk_default+0x3f/0x50 kernel/printk/printk.c:2465
vprintk+0x36/0x50 kernel/printk/printk_safe.c:82
_printk+0x17e/0x1b0 kernel/printk/printk.c:2475
ib_nl_process_good_ip_rsep drivers/infiniband/core/addr.c:128 [inline]
ib_nl_handle_ip_res_resp+0x963/0x9d0 drivers/infiniband/core/addr.c:141
rdma_nl_rcv_msg drivers/infiniband/core/netlink.c:-1 [inline]
rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
rdma_nl_rcv+0xefa/0x11c0 drivers/infiniband/core/netlink.c:259
netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline]
netlink_unicast+0xf04/0x12b0 net/netlink/af_netlink.c:1346
netlink_sendmsg+0x10b3/0x1250 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:714 [inline]
__sock_sendmsg+0x333/0x3d0 net/socket.c:729
____sys_sendmsg+0x7e0/0xd80 net/socket.c:2617
___sys_sendmsg+0x271/0x3b0 net/socket.c:2671
__sys_sendmsg+0x1aa/0x300 net/socket.c:2703
__compat_sys_sendmsg net/compat.c:346 [inline]
__do_compat_sys_sendmsg net/compat.c:353 [inline]
__se_compat_sys_sendmsg net/compat.c:350 [inline]
__ia32_compat_sys_sendmsg+0xa4/0x100 net/compat.c:350
ia32_sys_call+0x3f6c/0x4310 arch/x86/include/generated/asm/syscalls_32.h:371
do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline]
__do_fast_syscall_32+0xb0/0x150 arch/x86/entry/syscall_32.c:306
do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:331
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:3
Link: https://patch.msgid.link/r/0-v1-3fbaef094271+2cf-rdma_op_ip_rslv_syz_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: ae43f82867 ("IB/core: Add IP to GID netlink offload")
Reported-by: syzbot+938fcd548c303fe33c1a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/68dc3dac.a00a0220.102ee.004f.GAE@google.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb85d206be208bbf834883e948125a35ac59993a upstream.
Ensure that in the ftrace direct call logic, the CPU register state
(with ra = parent return address) is restored to the correct state after
the execution of the custom trampoline function and before returning to
the traced function. Additionally, guarantee the correctness of the jump
logic for jr t0 (traced function address).
Cc: stable@vger.kernel.org
Fixes: 9cdc3b6a29 ("LoongArch: ftrace: Add direct call support")
Reported-by: Youling Tang <tangyouling@kylinos.cn>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2fb6915fa22dc5524d704afba58a13305dd9f533 upstream.
"auto" was defined as a keyword back in the K&R days, but as a storage
type specifier. No one ever used it, since it was and is the default
storage type for local variables.
C++11 recycled the keyword to allow a type to be declared based on the
type of an initializer. This was finally adopted into standard C in
C23.
gcc and clang provide the "__auto_type" alias keyword as an extension
for pre-C23, however, there is no reason to pollute the bulk of the
source base with this temporary keyword; instead define "auto" as a
macro unless the compiler is running in C23+ mode.
This macro is added in <linux/compiler_types.h> because that header is
included in some of the tools headers, wheres <linux/compiler.h> is
not as it has a bunch of very kernel-specific things in it.
[ Cc: stable to reduce potential backporting burden. ]
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a258a3cb1895e3acf5f2fe245d17426e894bc935 upstream.
It is better to use unsigned long rather than long for _end and _text to
calculate the kernel length.
Cc: stable@vger.kernel.org # v6.3+
Fixes: e5f02b51fa ("LoongArch: Add support for kernel address space layout randomization (KASLR)")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a71df151e703b5e7e85b33369cee59ef2665e61 upstream.
The __pmd() and __pte() helper macros provide the correct initialization
syntax and abstraction for the pmd_t and pte_t types.
Use __pmd() to fix follow warning about __swp_entry_to_pmd() with gcc-15
under specific configs [1] :
In file included from ./include/linux/pgtable.h:6,
from ./include/linux/mm.h:31,
from ./include/linux/pagemap.h:8,
from arch/loongarch/mm/init.c:14:
./include/linux/swapops.h: In function ‘swp_entry_to_pmd’:
./arch/loongarch/include/asm/pgtable.h:302:34: error: missing braces around initializer [-Werror=missing-braces]
302 | #define __swp_entry_to_pmd(x) ((pmd_t) { (x).val | _PAGE_HUGE })
| ^
./include/linux/swapops.h:559:16: note: in expansion of macro ‘__swp_entry_to_pmd’
559 | return __swp_entry_to_pmd(arch_entry);
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Also update __swp_entry_to_pte() to use __pte() for consistency.
[1]. https://download.01.org/0day-ci/archive/20251119/202511190316.luI90kAo-lkp@intel.com/config
Cc: stable@vger.kernel.org
Signed-off-by: Yuli Wang <wangyl5933@chinaunicom.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf3fa8f232a1eec8d7b88dcd9e925e60f04f018d upstream.
Loongson-2K3000 has a new PCI ID (0x7a46) for its display controller,
Add it for pci_fixup_vgadev() since we prefer a discrete graphics card
as default boot device if present.
Cc: stable@vger.kernel.org
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cdd0f118ef87db8a664fb5ea366fd1766d2df1cd upstream.
vpu_get_plat_device() increases the reference count of the returned
platform device. However, when devm_kzalloc() fails, the reference
is not released, causing a reference leak.
Fix this by calling put_device() on fw_pdev->dev before returning
on the error path.
Fixes: e25a89f743 ("media: mtk-vcodec: potential dereference of null pointer")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e66a5cc606c58e72f18f9cdd868a3672e918f9f8 upstream.
The delayed_work delayed_work_enable_hotplug is initialized with
INIT_DELAYED_WORK() in adv7842_probe(), but it is never scheduled
anywhere in the probe function.
Calling cancel_delayed_work() on a work that has never been
scheduled is redundant and unnecessary, as there is no pending
work to cancel.
Remove the redundant cancel_delayed_work() from error handling
path and adjust the goto label accordingly to simplify the code
and avoid potential confusion.
Fixes: a89bcd4c6c ("[media] adv7842: add new video decoder driver")
Cc: stable@vger.kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f34f24355a607b98ecd9924837aab13c676eeca upstream.
The delayed_work delayed_work_enable_hotplug is initialized with
INIT_DELAYED_WORK() in adv76xx_probe(), but it is never scheduled
anywhere in the probe function.
Calling cancel_delayed_work() on a work that has never been
scheduled is redundant and unnecessary, as there is no pending
work to cancel.
Remove the redundant cancel_delayed_work() from error handling
path and adjust the goto label accordingly to simplify the code
and avoid potential confusion.
Fixes: 54450f591c ("[media] adv7604: driver for the Analog Devices ADV7604 video decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae246b0032146e352c4c06a7bf03cd3d5bcb2ecd upstream.
To avoid accessing the VPU register after release of the VPU core,
cancel the message work and destroy the workqueue that handles the
VPU message before release of the VPU core.
Fixes: 3cd084519c ("media: amphion: add vpu v4l2 m2m support")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 59ca64bf98e4209df8ace8057d31ae3c80f948cd upstream.
Platform drivers can be probed after their init sections have been
discarded (e.g. on probe deferral or manual rebind through sysfs) so the
probe function must not live in init.
Note that commit ffa1b391c6 ("V4L/DVB: vpif_cap/disp: Removed section
mismatch warning") incorrectly suppressed the modpost warning.
Fixes: ffa1b391c6 ("V4L/DVB: vpif_cap/disp: Removed section mismatch warning")
Fixes: e7332e3a55 ("V4L/DVB (12176): davinci/vpif_display: Add VPIF display driver")
Cc: stable@vger.kernel.org # 2.6.32
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ef841113724166c3c484d0e9ae6db1eb5634fde upstream.
Platform drivers can be probed after their init sections have been
discarded (e.g. on probe deferral or manual rebind through sysfs) so the
probe function must not live in init.
Note that commit ffa1b391c6 ("V4L/DVB: vpif_cap/disp: Removed section
mismatch warning") incorrectly suppressed the modpost warning.
Fixes: ffa1b391c6 ("V4L/DVB: vpif_cap/disp: Removed section mismatch warning")
Fixes: 6ffefff5a9 ("V4L/DVB (12906c): V4L : vpif capture driver for DM6467")
Cc: stable@vger.kernel.org # 2.6.32
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 94de23a9aa487d7c1372efb161721d7949a177ae upstream.
In vb2_dc_alloc(), get_device() is called to increment the device
reference count. However, if subsequent DMA allocation fails
(vb2_dc_alloc_coherent or vb2_dc_alloc_non_coherent returns error),
the function returns without calling put_device(), causing a device
reference leak.
Add put_device() call in the error path before kfree() to properly
release the device reference acquired earlier.
Fixes: de27891f67 ("media: videobuf2: handle non-contiguous DMA allocations")
Cc: stable@vger.kernel.org
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47825b1646a6a9eca0f90baa3d4f98947c2add96 upstream.
Fix the Hantro G2 HEVC decoder so that we use DPB index 0 whenever a
ninvalid index is received from user space. This protects the hardware
from doing faulty memory access which then leads to bus errors.
To be noted that when a reference is missing, userspace such as GStreamer
passes an invalid DPB index of 255. This issue was found by seeking to a
CRA picture using GStreamer. The framework is currently missing the code
to skip over RASL pictures placed after the CRA. This situation can also
occur while doing live streaming over lossy transport.
Fixes: cb5dd5a0fa ("media: hantro: Introduce G2/HEVC decoder")
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29de195ca39fc2ac0af6fd45522994df9f431f80 upstream.
The delayed_work delayed_work_enable_hpd is initialized with
INIT_DELAYED_WORK(), but it is never scheduled in tda1997x_probe().
Calling cancel_delayed_work() on a work that has never been
scheduled is redundant and unnecessary, as there is no pending
work to cancel.
Remove the redundant cancel_delayed_work() from error handling
path in tda1997x_probe() to avoid potential confusion.
Fixes: 9ac0038db9 ("media: i2c: Add TDA1997x HDMI receiver driver")
Cc: stable@vger.kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17dc8ccd6dd5ffe30aa9b0d36e2af1389344ce2b upstream.
v4l2_device_register_subdev_nodes() must called without taking
media_dev->graph_mutex to avoid potential AB-BA deadlock on further
subdevice driver initialization.
Fixes: fa91f1056f ("[media] exynos4-is: Add support for asynchronous subdevices registration")
Cc: stable@vger.kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 445e1658894fd74eab7e53071fa16233887574ed upstream.
The function calls of_parse_phandle() which returns
a device node with an incremented reference count. When the bonded device
is not available, the function
returns NULL without releasing the reference, causing a reference leak.
Add of_node_put(np) to release the device node reference.
The of_node_put function handles NULL pointers.
Found through static analysis by reviewing the doc of of_parse_phandle()
and cross-checking its usage patterns across the codebase.
Fixes: 7625ee981a ("[media] media: platform: rcar_drif: Add DRIF support")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d2bceb2e20e783d57e739c71e4e50b4b9f4a3953 upstream.
It's possible for max1 to remain -1 if msp_read() always fail. This
variable is further used as index for accessing arrays.
Fix that by checking max1 prior to array accesses.
It seems that restart is the preferable action in case of out-of-bounds
value.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8a4b275f9c ("V4L/DVB (3427): audmode and rxsubchans fixes (VIDIOC_G/S_TUNER)")
Cc: stable@vger.kernel.org
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c43bcd2b2aa3c2ca9d2433c3990ecbc2c47d10eb upstream.
In cec_devnode_init(), the debugfs directory created with
debugfs_create_dir() is not removed if bus_register() fails.
This leaves a stale "cec" entry in debugfs and prevents
proper module reloading.
Fix this by removing the debugfs directory in the error path.
Fixes: a56960e8b4 ("[media] cec: add HDMI CEC framework (core)")
Cc: stable@vger.kernel.org
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0155e868cbc111846cc2809c1546ea53810a56ae upstream.
The variables were never clamped because the return value of clamp_val()
was not used. Fix this by assigning the clamped values, and use clamp()
instead of clamp_val().
Cc: stable@vger.kernel.org
Fixes: 3f16ff608a ("[ARM] pxafb: cleanup of the timing checking code")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3f44742bbb10537fe53d83d20dea2a7c167674d upstream.
While debuggigng why X would not start on mips64 Sgi/O2 I found the
phys adress being off. Turns out the gbefb passed the internal
dma_addr as phys. May be broken pre git history. Fix by converting
dma_to_phys.
Signed-off-by: René Rebe <rene@exactco.de>
Cc: <stable@vger.kernel.org> # v4.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0ac06ae53be0cdb61f5fe6b62d25d3317c51657 upstream.
There may be devices with physical block size larger than 4k.
If dm-bufio sends I/O that is not aligned on physical block size,
performance is degraded.
The 4k minimum alignment limit is there because some SSDs report logical
and physical block size 512 despite having 4k internally - so dm-bufio
shouldn't send I/Os not aligned on 4k boundary, because they perform
badly (the SSD does read-modify-write for them).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7fa3e7d114abc9cc71cc35d768e116641074ddb4 upstream.
When performing a read-modify-write(RMW) operation, any modification
to a buffered block must cause the entire buffer to be marked dirty.
Marking only a subrange as dirty is incorrect because the underlying
device block size(ubs) defines the minimum read/write granularity. A
lower device can perform I/O only on regions which are fully aligned
and sized to ubs.
This change ensures that write-back operations always occur in full
ubs-sized chunks, matching the intended emulation semantics of the
EBS target.
As for user space visible impact, submitting sub-ubs and misaligned
I/O for devices which are tuned to ubs sizes only, will reject such
requests, therefore it can lead to losing data. Example:
1) Create a 8K nvme device in qemu by adding
-device nvme,drive=drv0,serial=foo,logical_block_size=8192,physical_block_size=8192
2) Setup dm-ebs to emulate 512B to 8K mapping
urezki@pc638:~/bin$ cat dmsetup.sh
lower=/dev/nvme0n1
len=$(blockdev --getsz "$lower")
echo "0 $len ebs $lower 0 1 16" | dmsetup create nvme-8k
urezki@pc638:~/bin$
offset 0, ebs=1 and ubs=16(in sectors).
3) Create an ext4 filesystem(default 4K block size)
urezki@pc638:~/bin$ sudo mkfs.ext4 -F /dev/dm-0
mke2fs 1.47.0 (5-Feb-2023)
Discarding device blocks: done
Creating filesystem with 2072576 4k blocks and 518144 inodes
Filesystem UUID: bd0b6ca6-0506-4e31-86da-8d22c9d50b63
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: mkfs.ext4: Input/output error while writing out and closing file system
urezki@pc638:~/bin$ dmesg
<snip>
[ 1618.875449] buffer_io_error: 1028 callbacks suppressed
[ 1618.875456] Buffer I/O error on dev dm-0, logical block 0, lost async page write
[ 1618.875527] Buffer I/O error on dev dm-0, logical block 1, lost async page write
[ 1618.875602] Buffer I/O error on dev dm-0, logical block 2, lost async page write
[ 1618.875620] Buffer I/O error on dev dm-0, logical block 3, lost async page write
[ 1618.875639] Buffer I/O error on dev dm-0, logical block 4, lost async page write
[ 1618.894316] Buffer I/O error on dev dm-0, logical block 5, lost async page write
[ 1618.894358] Buffer I/O error on dev dm-0, logical block 6, lost async page write
[ 1618.894380] Buffer I/O error on dev dm-0, logical block 7, lost async page write
[ 1618.894405] Buffer I/O error on dev dm-0, logical block 8, lost async page write
[ 1618.894427] Buffer I/O error on dev dm-0, logical block 9, lost async page write
<snip>
Many I/O errors because the lower 8K device rejects sub-ubs/misaligned
requests.
with a patch:
urezki@pc638:~/bin$ sudo mkfs.ext4 -F /dev/dm-0
mke2fs 1.47.0 (5-Feb-2023)
Discarding device blocks: done
Creating filesystem with 2072576 4k blocks and 518144 inodes
Filesystem UUID: 9b54f44f-ef55-4bd4-9e40-c8b775a616ac
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done
urezki@pc638:~/bin$ sudo mount /dev/dm-0 /mnt/
urezki@pc638:~/bin$ ls -al /mnt/
total 24
drwxr-xr-x 3 root root 4096 Oct 17 15:13 .
drwxr-xr-x 19 root root 4096 Jul 10 19:42 ..
drwx------ 2 root root 16384 Oct 17 15:13 lost+found
urezki@pc638:~/bin$
After this change: mkfs completes; mount succeeds.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85f96cbbbc67b59652b2c1ec394b8ddc0ddf1b0b upstream.
Add mutex lock to stratix10_svc_allocate_memory and
stratix10_svc_free_memory for thread safety. This prevents race
conditions and ensures proper synchronization during memory operations.
This is required for parallel communication with the Stratix10 service
channel.
Fixes: 7ca5ce8965 ("firmware: add Intel Stratix10 service layer driver")
Cc: stable@vger.kernel.org
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8163419e3e05d71dcfa8fb49c8fdf8d76908fe51 upstream.
It's possible for cp_read() and hdmi_read() to return -EIO. Those
values are further used as indexes for accessing arrays.
Fix that by checking return values where it's needed.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a89bcd4c6c ("[media] adv7842: add new video decoder driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fb1d3ce3e74a4530042795e1e065422295f1371 upstream.
When the kernel leaves to userspace via syscall_restore_rfi(), the
W bit is not set in the new PSW. This doesn't cause any problems
because there's no 64 bit userspace for parisc. Simple static binaries
are usually loaded at addresses way below the 32 bit limit so the W bit
doesn't matter.
Fix this by setting the W bit when TIF_32BIT is not set.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1aa4524c0c1b54842c4c0a370171d11b12d0709b upstream.
In wide mode, the IASQ contain the upper part of the GVA
during interruption. This needs to be reversed before
the space is used - otherwise it contains parts of IAOQ.
See Page 2-13 "Processing Resources / Interruption Instruction
Address Queues" in the Parisc 2.0 Architecture Manual page 2-13
for an explanation.
The IAOQ/IASQ space_adjust was skipped for other interruptions
than itlb misses. However, the code in handle_interruption()
checks whether iasq[0] contains a valid space. Due to the not
masked out bits this match failed and the process was killed.
Also add space_adjust for IAOQ1/IASQ1 so ptregs contains sane values.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1240abf4b71f632f0117b056e22488e4d9808938 upstream.
The driver calls reset_control_get_optional_exclusive() but never calls
reset_control_put() in error paths or in the remove function. This causes
a resource leak when probe fails after successfully acquiring the reset
control, or when the driver is unloaded.
Switch to devm_reset_control_get_optional_exclusive() to automatically
manage the reset control resource.
Fixes: a4b80242d0 ("media: st-rc: explicitly request exclusive reset control")
Cc: stable@vger.kernel.org
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2bac49bad1f3553cc3b3bfb22cc194e9bd9e8427 upstream.
MAX77620 is most likely always a single device on the board, however
nothing stops board designers to have two of them, thus same device
driver could probe twice. Or user could manually try to probing second
time.
Device driver is not ready for that case, because it allocates
statically 'struct regmap_irq_chip' as non-const and stores during
probe in 'irq_drv_data' member a pointer to per-probe state
container ('struct max77620_chip'). devm_regmap_add_irq_chip() does not
make a copy of 'struct regmap_irq_chip' but store the pointer.
Second probe - either successful or failure - would overwrite the
'irq_drv_data' from previous device probe, so interrupts would be
executed in a wrong context.
Cc: stable@vger.kernel.org
Fixes: 3df140d11c ("mfd: max77620: Mask/unmask interrupt before/after servicing it")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251023101939.67991-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccb7cd3218e48665f3c7e19eede0da5f069c323d upstream.
Make sure to drop the reference taken to the sysmgr platform device when
retrieving its driver data.
Note that holding a reference to a device does not prevent its driver
data from going away.
Fixes: f36e789a1f ("mfd: altera-sysmgr: Add SOCFPGA System Manager")
Cc: stable@vger.kernel.org # 5.2
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf33f0b7df13685234ccea7be7bfe316b60db4db upstream.
Commit f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS)
about the number of elements in .hws[], so that it can warn when .hws[]
is accessed out of bounds. As noted in that change, the __counted_by
member must be initialized with the number of elements before the first
array access happens, otherwise there will be a warning from each access
prior to the initialization because the number of elements is zero. This
occurs in exynos_clkout_probe() due to .num being assigned after .hws[]
has been accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/samsung/clk-exynos-clkout.c:178:18
index 0 is out of range for type 'clk_hw *[*]'
Move the .num initialization to before the first access of .hws[],
clearing up the warning.
Cc: stable@vger.kernel.org
Fixes: f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with __counted_by")
Reported-by: Jochen Sprickerhof <jochen@sprickerhof.de>
Closes: https://lore.kernel.org/aSIYDN5eyKFKoXKL@eldamar.lan/
Tested-by: Jochen Sprickerhof <jochen@sprickerhof.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 434959618c47efe9e5f2e20f4a850caac4f6b823 upstream.
If a GPIO is used to control the chip's enable pin, it needs to be pulled
high before any i2c communication is attempted.
Currently, the enable GPIO handling is not correct.
Assume the enable GPIO is low when the probe function is entered. In this
case the device is in SHUTDOWN mode and does not react to i2c commands.
During probe the following sequence happens:
1. The call to lp50xx_reset() on line 548 has no effect as i2c is not
possible yet.
2. Then - on line 552 - lp50xx_enable_disable() is called. As
"priv->enable_gpio“ has not yet been initialized, setting the GPIO has
no effect. Also the i2c enable command is not executed as the device
is still in SHUTDOWN.
3. On line 556 the call to lp50xx_probe_dt() finally parses the rest of
the DT and the configured priv->enable_gpio is set up.
As a result the device is still in SHUTDOWN mode and not ready for
operation.
Split lp50xx_enable_disable() into distinct enable and disable functions
to enforce correct ordering between enable_gpio manipulations and i2c
commands.
Read enable_gpio configuration from DT before attempting to manipulate
enable_gpio.
Add delays to observe correct wait timing after manipulating enable_gpio
and before any i2c communication.
Cc: stable@vger.kernel.org
Fixes: 242b81170f ("leds: lp50xx: Add the LP50XX family of the RGB LED driver")
Signed-off-by: Christian Hitz <christian.hitz@bbv.ch>
Link: https://patch.msgid.link/20251028155141.1603193-1-christian@klarinett.li
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26fe74d598c32e7bc6f150edfc4aa43e1bee55db upstream.
led_banks contains LED module number(s) that should be grouped into the
module bank. led_banks is 0-initialized.
By checking the led_banks entries for 0, un-set entries are detected.
But a 0-entry also indicates that LED module 0 should be grouped into the
module bank.
By only iterating over the available entries no check for unused entries
is required and LED module 0 can be added to bank.
Cc: stable@vger.kernel.org
Fixes: 242b81170f ("leds: lp50xx: Add the LP50XX family of the RGB LED driver")
Signed-off-by: Christian Hitz <christian.hitz@bbv.ch>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Link: https://patch.msgid.link/20251008123222.1117331-1-christian@klarinett.li
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00312419f0863964625d6dcda8183f96849412c6 upstream.
On systems using the hash MMU, there is a software SLB preload cache that
mirrors the entries loaded into the hardware SLB buffer. This preload
cache is subject to periodic eviction — typically after every 256 context
switches — to remove old entry.
To optimize performance, the kernel skips switch_mmu_context() in
switch_mm_irqs_off() when the prev and next mm_struct are the same.
However, on hash MMU systems, this can lead to inconsistencies between
the hardware SLB and the software preload cache.
If an SLB entry for a process is evicted from the software cache on one
CPU, and the same process later runs on another CPU without executing
switch_mmu_context(), the hardware SLB may retain stale entries. If the
kernel then attempts to reload that entry, it can trigger an SLB
multi-hit error.
The following timeline shows how stale SLB entries are created and can
cause a multi-hit error when a process moves between CPUs without a
MMU context switch.
CPU 0 CPU 1
----- -----
Process P
exec swapper/1
load_elf_binary
begin_new_exc
activate_mm
switch_mm_irqs_off
switch_mmu_context
switch_slb
/*
* This invalidates all
* the entries in the HW
* and setup the new HW
* SLB entries as per the
* preload cache.
*/
context_switch
sched_migrate_task migrates process P to cpu-1
Process swapper/0 context switch (to process P)
(uses mm_struct of Process P) switch_mm_irqs_off()
switch_slb
load_slb++
/*
* load_slb becomes 0 here
* and we evict an entry from
* the preload cache with
* preload_age(). We still
* keep HW SLB and preload
* cache in sync, that is
* because all HW SLB entries
* anyways gets evicted in
* switch_slb during SLBIA.
* We then only add those
* entries back in HW SLB,
* which are currently
* present in preload_cache
* (after eviction).
*/
load_elf_binary continues...
setup_new_exec()
slb_setup_new_exec()
sched_switch event
sched_migrate_task migrates
process P to cpu-0
context_switch from swapper/0 to Process P
switch_mm_irqs_off()
/*
* Since both prev and next mm struct are same we don't call
* switch_mmu_context(). This will cause the HW SLB and SW preload
* cache to go out of sync in preload_new_slb_context. Because there
* was an SLB entry which was evicted from both HW and preload cache
* on cpu-1. Now later in preload_new_slb_context(), when we will try
* to add the same preload entry again, we will add this to the SW
* preload cache and then will add it to the HW SLB. Since on cpu-0
* this entry was never invalidated, hence adding this entry to the HW
* SLB will cause a SLB multi-hit error.
*/
load_elf_binary continues...
START_THREAD
start_thread
preload_new_slb_context
/*
* This tries to add a new EA to preload cache which was earlier
* evicted from both cpu-1 HW SLB and preload cache. This caused the
* HW SLB of cpu-0 to go out of sync with the SW preload cache. The
* reason for this was, that when we context switched back on CPU-0,
* we should have ideally called switch_mmu_context() which will
* bring the HW SLB entries on CPU-0 in sync with SW preload cache
* entries by setting up the mmu context properly. But we didn't do
* that since the prev mm_struct running on cpu-0 was same as the
* next mm_struct (which is true for swapper / kernel threads). So
* now when we try to add this new entry into the HW SLB of cpu-0,
* we hit a SLB multi-hit error.
*/
WARNING: CPU: 0 PID: 1810970 at arch/powerpc/mm/book3s64/slb.c:62
assert_slb_presence+0x2c/0x50(48 results) 02:47:29 [20157/42149]
Modules linked in:
CPU: 0 UID: 0 PID: 1810970 Comm: dd Not tainted 6.16.0-rc3-dirty #12
VOLUNTARY
Hardware name: IBM pSeries (emulated by qemu) POWER8 (architected)
0x4d0200 0xf000004 of:SLOF,HEAD hv:linux,kvm pSeries
NIP: c00000000015426c LR: c0000000001543b4 CTR: 0000000000000000
REGS: c0000000497c77e0 TRAP: 0700 Not tainted (6.16.0-rc3-dirty)
MSR: 8000000002823033 <SF,VEC,VSX,FP,ME,IR,DR,RI,LE> CR: 28888482 XER: 00000000
CFAR: c0000000001543b0 IRQMASK: 3
<...>
NIP [c00000000015426c] assert_slb_presence+0x2c/0x50
LR [c0000000001543b4] slb_insert_entry+0x124/0x390
Call Trace:
0x7fffceb5ffff (unreliable)
preload_new_slb_context+0x100/0x1a0
start_thread+0x26c/0x420
load_elf_binary+0x1b04/0x1c40
bprm_execve+0x358/0x680
do_execveat_common+0x1f8/0x240
sys_execve+0x58/0x70
system_call_exception+0x114/0x300
system_call_common+0x160/0x2c4
>From the above analysis, during early exec the hardware SLB is cleared,
and entries from the software preload cache are reloaded into hardware
by switch_slb. However, preload_new_slb_context and slb_setup_new_exec
also attempt to load some of the same entries, which can trigger a
multi-hit. In most cases, these additional preloads simply hit existing
entries and add nothing new. Removing these functions avoids redundant
preloads and eliminates the multi-hit issue. This patch removes these
two functions.
We tested process switching performance using the context_switch
benchmark on POWER9/hash, and observed no regression.
Without this patch: 129041 ops/sec
With this patch: 129341 ops/sec
We also measured SLB faults during boot, and the counts are essentially
the same with and without this patch.
SLB faults without this patch: 19727
SLB faults with this patch: 19786
Fixes: 5434ae7462 ("powerpc/64s/hash: Add a SLB preload cache")
cc: stable@vger.kernel.org
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/0ac694ae683494fe8cadbd911a1a5018d5d3c541.1761834163.git.ritesh.list@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78fc63ffa7813e33681839bb33826c24195f0eb7 upstream.
On 32-bit book3s with hash-MMUs, tlb_flush() was a no-op. This was
unnoticed because all uses until recently were for unmaps, and thus
handled by __tlb_remove_tlb_entry().
After commit 4a18419f71 ("mm/mprotect: use mmu_gather") in kernel 5.19,
tlb_gather_mmu() started being used for mprotect as well. This caused
mprotect to simply not work on these machines:
int *ptr = mmap(NULL, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
*ptr = 1; // force HPTE to be created
mprotect(ptr, 4096, PROT_READ);
*ptr = 2; // should segfault, but succeeds
Fixed by making tlb_flush() actually flush TLB pages. This finally
agrees with the behaviour of boot3s64's tlb_flush().
Fixes: 4a18419f71 ("mm/mprotect: use mmu_gather")
Cc: stable@vger.kernel.org
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Dave Vasilevsky <dave@vasilevsky.ca>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251116-vasi-mprotect-g3-v3-1-59a9bd33ba00@vasilevsky.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51f89c488f2ecc020f82bfedd77482584ce8027a upstream.
The SoC pin Y1 is incorrectly defined in the WKUP Pinmux device-tree node
(pinctrl@4301c000) leading to the following silent failure:
pinctrl-single 4301c000.pinctrl: mux offset out of range: 0x1dc (0x178)
According to the datasheet for the J721E SoC [0], the pin Y1 belongs to the
MAIN Pinmux device-tree node (pinctrl@11c000). This is confirmed by the
address of the pinmux register for it on page 142 of the datasheet which is
0x00011C1DC.
Hence fix it.
[0]: https://www.ti.com/lit/ds/symlink/tda4vm.pdf
Fixes: 97b67cc102dc ("arm64: dts: ti: k3-j721e-sk: Add DT nodes for power regulators")
Cc: stable@vger.kernel.org
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Link: https://patch.msgid.link/20251119160148.2752616-1-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 894f475f88e06c0f352c829849560790dbdedbe5 upstream.
When a PCI device is suspended, it is normally the PCI core's job to save
Config Space and put the device into a low power state. However drivers
are allowed to assume these responsibilities. When they do, the PCI core
can tell by looking at the state_saved flag in struct pci_dev: The flag
is cleared before commencing the suspend sequence and it is set when
pci_save_state() is called. If the PCI core finds the flag set late in
the suspend sequence, it refrains from calling pci_save_state() itself.
But there are two corner cases where the PCI core neglects to clear the
flag before commencing the suspend sequence:
* If a driver has legacy PCI PM callbacks, pci_legacy_suspend() neglects
to clear the flag. The (stale) flag is subsequently queried by
pci_legacy_suspend() itself and pci_legacy_suspend_late().
* If a device has no driver or its driver has no PCI PM callbacks,
pci_pm_freeze() neglects to clear the flag. The (stale) flag is
subsequently queried by pci_pm_freeze_noirq().
The flag may be set prior to suspend if the device went through error
recovery: Drivers commonly invoke pci_restore_state() + pci_save_state()
to restore Config Space after reset.
The flag may also be set if drivers call pci_save_state() on probe to
allow for recovery from subsequent errors.
The result is that pci_legacy_suspend_late() and pci_pm_freeze_noirq()
don't call pci_save_state() and so the state that will be restored on
resume is the one recorded on last error recovery or on probe, not the one
that the device had on suspend. If the two states happen to be identical,
there's no problem.
Reinstate clearing the flag in pci_legacy_suspend() and pci_pm_freeze().
The two functions used to do that until commit 4b77b0a2ba ("PCI: Clear
saved_state after the state has been restored") deemed it unnecessary
because it assumed that it's sufficient to clear the flag on resume in
pci_restore_state(). The commit seemingly did not take into account that
pci_save_state() and pci_restore_state() are not only used by power
management code, but also for error recovery.
Devices without driver or whose driver has no PCI PM callbacks may be in
runtime suspend when pci_pm_freeze() is called. Their state has already
been saved, so don't clear the flag to skip a pointless pci_save_state()
in pci_pm_freeze_noirq().
None of the drivers with legacy PCI PM callbacks seem to use runtime PM,
so clear the flag unconditionally in their case.
Fixes: 4b77b0a2ba ("PCI: Clear saved_state after the state has been restored")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Cc: stable@vger.kernel.org # v2.6.32+
Link: https://patch.msgid.link/094f2aad64418710daf0940112abe5a0afdc6bce.1763483367.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca389a55d8b2d86a817433bf82e0602b68c4d541 upstream.
logi_dj_recv_query_paired_devices() and logi_dj_recv_switch_to_dj_mode()
both have 2 callers which all log an error if the function fails. Move
the error logging to inside these 2 functions to remove the duplicated
error logging in the callers.
While at it also move the logi_dj_recv_send_report() call error handling
in logi_dj_recv_switch_to_dj_mode() to directly after the call. That call
only fails if the report cannot be found and in that case it does nothing,
so the msleep() is not necessary on failures.
Fixes: 6f20d32612 ("HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72f98ef9a4be30d2a60136dd6faee376f780d06c upstream.
Patch series "Fix stale IOTLB entries for kernel address space", v7.
This proposes a fix for a security vulnerability related to IOMMU Shared
Virtual Addressing (SVA). In an SVA context, an IOMMU can cache kernel
page table entries. When a kernel page table page is freed and
reallocated for another purpose, the IOMMU might still hold stale,
incorrect entries. This can be exploited to cause a use-after-free or
write-after-free condition, potentially leading to privilege escalation or
data corruption.
This solution introduces a deferred freeing mechanism for kernel page
table pages, which provides a safe window to notify the IOMMU to
invalidate its caches before the page is reused.
This patch (of 8):
In the IOMMU Shared Virtual Addressing (SVA) context, the IOMMU hardware
shares and walks the CPU's page tables. The x86 architecture maps the
kernel's virtual address space into the upper portion of every process's
page table. Consequently, in an SVA context, the IOMMU hardware can walk
and cache kernel page table entries.
The Linux kernel currently lacks a notification mechanism for kernel page
table changes, specifically when page table pages are freed and reused.
The IOMMU driver is only notified of changes to user virtual address
mappings. This can cause the IOMMU's internal caches to retain stale
entries for kernel VA.
Use-After-Free (UAF) and Write-After-Free (WAF) conditions arise when
kernel page table pages are freed and later reallocated. The IOMMU could
misinterpret the new data as valid page table entries. The IOMMU might
then walk into attacker-controlled memory, leading to arbitrary physical
memory DMA access or privilege escalation. This is also a
Write-After-Free issue, as the IOMMU will potentially continue to write
Accessed and Dirty bits to the freed memory while attempting to walk the
stale page tables.
Currently, SVA contexts are unprivileged and cannot access kernel
mappings. However, the IOMMU will still walk kernel-only page tables all
the way down to the leaf entries, where it realizes the mapping is for the
kernel and errors out. This means the IOMMU still caches these
intermediate page table entries, making the described vulnerability a real
concern.
Disable SVA on x86 architecture until the IOMMU can receive notification
to flush the paging cache before freeing the CPU kernel page table pages.
Link: https://lkml.kernel.org/r/20251022082635.2462433-1-baolu.lu@linux.intel.com
Link: https://lkml.kernel.org/r/20251022082635.2462433-2-baolu.lu@linux.intel.com
Fixes: 26b25a2b98 ("iommu: Bind process address spaces to devices")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yi Lai <yi1.lai@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c08934a61201db8f1d1c66fcc63fb2eb526b656d upstream.
Make sure to drop the reference taken to the iommu platform device when
looking up its driver data during probe_device().
Note that commit 9826e393e4 ("iommu/tegra-smmu: Fix missing
put_device() call in tegra_smmu_find") fixed the leak in an error path,
but the reference is still leaking on success.
Fixes: 8918465163 ("memory: Add NVIDIA Tegra memory controller support")
Cc: stable@vger.kernel.org # 3.19: 9826e393e4
Cc: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
