commit 82470f7d90 upstream.
When generate a synthetic event with many params and then create a trace
action for it [1], kernel panic happened [2].
It is because that in trace_action_create() 'data->n_params' is up to
SYNTH_FIELDS_MAX (current value is 64), and array 'data->var_ref_idx'
keeps indices into array 'hist_data->var_refs' for each synthetic event
param, but the length of 'data->var_ref_idx' is TRACING_MAP_VARS_MAX
(current value is 16), so out-of-bound write happened when 'data->n_params'
more than 16. In this case, 'data->match_data.event' is overwritten and
eventually cause the panic.
To solve the issue, adjust the length of 'data->var_ref_idx' to be
SYNTH_FIELDS_MAX and add sanity checks to avoid out-of-bound write.
[1]
# cd /sys/kernel/tracing/
# echo "my_synth_event int v1; int v2; int v3; int v4; int v5; int v6;\
int v7; int v8; int v9; int v10; int v11; int v12; int v13; int v14;\
int v15; int v16; int v17; int v18; int v19; int v20; int v21; int v22;\
int v23; int v24; int v25; int v26; int v27; int v28; int v29; int v30;\
int v31; int v32; int v33; int v34; int v35; int v36; int v37; int v38;\
int v39; int v40; int v41; int v42; int v43; int v44; int v45; int v46;\
int v47; int v48; int v49; int v50; int v51; int v52; int v53; int v54;\
int v55; int v56; int v57; int v58; int v59; int v60; int v61; int v62;\
int v63" >> synthetic_events
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="bash"' >> \
events/sched/sched_waking/trigger
# echo "hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(\
pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\
pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\
pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\
pid,pid,pid,pid,pid,pid,pid,pid,pid)" >> events/sched/sched_switch/trigger
[2]
BUG: unable to handle page fault for address: ffff91c900000000
PGD 61001067 P4D 61001067 PUD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 2 PID: 322 Comm: bash Tainted: G W 6.1.0-rc8+ #229
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:strcmp+0xc/0x30
Code: 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee
c3 cc cc cc cc 0f 1f 00 31 c0 eb 08 48 83 c0 01 84 d2 74 13 <0f> b6 14
07 3a 14 06 74 ef 19 c0 83 c8 01 c3 cc cc cc cc 31 c3
RSP: 0018:ffff9b3b00f53c48 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffffffffba958a68 RCX: 0000000000000000
RDX: 0000000000000010 RSI: ffff91c943d33a90 RDI: ffff91c900000000
RBP: ffff91c900000000 R08: 00000018d604b529 R09: 0000000000000000
R10: ffff91c9483eddb1 R11: ffff91ca483eddab R12: ffff91c946171580
R13: ffff91c9479f0538 R14: ffff91c9457c2848 R15: ffff91c9479f0538
FS: 00007f1d1cfbe740(0000) GS:ffff91c9bdc80000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff91c900000000 CR3: 0000000006316000 CR4: 00000000000006e0
Call Trace:
<TASK>
__find_event_file+0x55/0x90
action_create+0x76c/0x1060
event_hist_trigger_parse+0x146d/0x2060
? event_trigger_write+0x31/0xd0
trigger_process_regex+0xbb/0x110
event_trigger_write+0x6b/0xd0
vfs_write+0xc8/0x3e0
? alloc_fd+0xc0/0x160
? preempt_count_add+0x4d/0xa0
? preempt_count_add+0x70/0xa0
ksys_write+0x5f/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f1d1d0cf077
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e
fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74
RSP: 002b:00007ffcebb0e568 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000143 RCX: 00007f1d1d0cf077
RDX: 0000000000000143 RSI: 00005639265aa7e0 RDI: 0000000000000001
RBP: 00005639265aa7e0 R08: 000000000000000a R09: 0000000000000142
R10: 000056392639c017 R11: 0000000000000246 R12: 0000000000000143
R13: 00007f1d1d1ae6a0 R14: 00007f1d1d1aa4a0 R15: 00007f1d1d1a98a0
</TASK>
Modules linked in:
CR2: ffff91c900000000
---[ end trace 0000000000000000 ]---
RIP: 0010:strcmp+0xc/0x30
Code: 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee
c3 cc cc cc cc 0f 1f 00 31 c0 eb 08 48 83 c0 01 84 d2 74 13 <0f> b6 14
07 3a 14 06 74 ef 19 c0 83 c8 01 c3 cc cc cc cc 31 c3
RSP: 0018:ffff9b3b00f53c48 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffffffffba958a68 RCX: 0000000000000000
RDX: 0000000000000010 RSI: ffff91c943d33a90 RDI: ffff91c900000000
RBP: ffff91c900000000 R08: 00000018d604b529 R09: 0000000000000000
R10: ffff91c9483eddb1 R11: ffff91ca483eddab R12: ffff91c946171580
R13: ffff91c9479f0538 R14: ffff91c9457c2848 R15: ffff91c9479f0538
FS: 00007f1d1cfbe740(0000) GS:ffff91c9bdc80000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff91c900000000 CR3: 0000000006316000 CR4: 00000000000006e0
Link: https://lore.kernel.org/linux-trace-kernel/20221207035143.2278781-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes: d380dcde9a ("tracing: Fix now invalid var_ref_vals assumption in trace action")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4ff8e7a71 upstream.
Per PCIe r6.0, sec 6.30.1, a data object Length of 0x0 indicates 2^18
DWORDs (256K DW or 1MB) being transferred. Adjust the value of data object
length for this case on both sending side and receiving side.
Don't bother checking whether Length is greater than SZ_1M because all
values of the 18-bit Length field are valid, and it is impossible to
represent anything larger than SZ_1M:
0x00000 256K DW (1M bytes)
0x00001 1 DW (4 bytes)
...
0x3ffff 256K-1 DW (1M - 4 bytes)
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20221116015637.3299664-1-ming4.li@intel.com
Fixes: 9d24322e88 ("PCI/DOE: Add DOE mailbox support functions")
Signed-off-by: Li Ming <ming4.li@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f07788079f upstream.
gcc-13 slightly changes the type of constant expressions that are defined
in an enum, which triggers a compile time sanity check in libata:
linux/drivers/ata/libahci.c: In function 'ahci_led_store':
linux/include/linux/compiler_types.h:357:45: error: call to '__compiletime_assert_302' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
357 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
The new behavior is that sizeof() returns the same value for the
constant as it does for the enum type, which is generally more sensible
and consistent.
The problem in libata is that it contains a single enum definition for
lots of unrelated constants, some of which are large positive (unsigned)
integers like 0xffffffff, while others like (1<<31) are interpreted as
negative integers, and this forces the enum type to become 64 bit wide
even though most constants would still fit into a signed 32-bit 'int'.
Fix this by changing the entire enum definition to use BIT(x) in place
of (1<<x), which results in all values being seen as 'unsigned' and
fitting into an unsigned 32-bit type.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107917
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107405
Reported-by: Luis Machado <luis.machado@arm.com>
Cc: linux-ide@vger.kernel.org
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: stable@vger.kernel.org
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Luis Machado <luis.machado@arm.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b9973861c upstream.
Otherwise the commit that will be aborted will be associated with the
metadata objects that will be torn down. Must write needs_check flag
to metadata with a reset block manager.
Found through code-inspection (and compared against dm-thin.c).
Cc: stable@vger.kernel.org
Fixes: 028ae9f76f ("dm cache: add fail io mode and needs_check flag")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88430ebcbc upstream.
When dm_resume() and dm_destroy() are concurrent, it will
lead to UAF, as follows:
BUG: KASAN: use-after-free in __run_timers+0x173/0x710
Write of size 8 at addr ffff88816d9490f0 by task swapper/0/0
<snip>
Call Trace:
<IRQ>
dump_stack_lvl+0x73/0x9f
print_report.cold+0x132/0xaa2
_raw_spin_lock_irqsave+0xcd/0x160
__run_timers+0x173/0x710
kasan_report+0xad/0x110
__run_timers+0x173/0x710
__asan_store8+0x9c/0x140
__run_timers+0x173/0x710
call_timer_fn+0x310/0x310
pvclock_clocksource_read+0xfa/0x250
kvm_clock_read+0x2c/0x70
kvm_clock_get_cycles+0xd/0x20
ktime_get+0x5c/0x110
lapic_next_event+0x38/0x50
clockevents_program_event+0xf1/0x1e0
run_timer_softirq+0x49/0x90
__do_softirq+0x16e/0x62c
__irq_exit_rcu+0x1fa/0x270
irq_exit_rcu+0x12/0x20
sysvec_apic_timer_interrupt+0x8e/0xc0
One of the concurrency UAF can be shown as below:
use free
do_resume |
__find_device_hash_cell |
dm_get |
atomic_inc(&md->holders) |
| dm_destroy
| __dm_destroy
| if (!dm_suspended_md(md))
| atomic_read(&md->holders)
| msleep(1)
dm_resume |
__dm_resume |
dm_table_resume_targets |
pool_resume |
do_waker #add delay work |
dm_put |
atomic_dec(&md->holders) |
| dm_table_destroy
| pool_dtr
| __pool_dec
| __pool_destroy
| destroy_workqueue
| kfree(pool) # free pool
time out
__do_softirq
run_timer_softirq # pool has already been freed
This can be easily reproduced using:
1. create thin-pool
2. dmsetup suspend pool
3. dmsetup resume pool
4. dmsetup remove_all # Concurrent with 3
The root cause of this UAF bug is that dm_resume() adds timer after
dm_destroy() skips cancelling the timer because of suspend status.
After timeout, it will call run_timer_softirq(), however pool has
already been freed. The concurrency UAF bug will happen.
Therefore, cancelling timer again in __pool_destroy().
Cc: stable@vger.kernel.org
Fixes: 991d9fa02d ("dm: add thin provisioning target")
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 19eb1650af upstream.
If a thinpool set fail_io while suspending, resume will fail with:
device-mapper: resume ioctl on vg-thinpool failed: Invalid argument
The thin-pool also can't be removed if an in-flight bio is in the
deferred list.
This can be easily reproduced using:
echo "offline" > /sys/block/sda/device/state
dd if=/dev/zero of=/dev/mapper/thin bs=4K count=1
dmsetup suspend /dev/mapper/pool
mkfs.ext4 /dev/mapper/thin
dmsetup resume /dev/mapper/pool
The root cause is maybe_resize_data_dev() will check fail_io and return
error before called dm_resume.
Fix this by adding FAIL mode check at the end of pool_preresume().
Cc: stable@vger.kernel.org
Fixes: da105ed5fd ("dm thin metadata: introduce dm_pool_abort_metadata")
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7991dbff68 upstream.
Recently we found a softlock up problem in dm thin pool btree lookup
code due to corrupted metadata:
Kernel panic - not syncing: softlockup: hung tasks
CPU: 7 PID: 2669225 Comm: kworker/u16:3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: dm-thin do_worker [dm_thin_pool]
Call Trace:
<IRQ>
dump_stack+0x9c/0xd3
panic+0x35d/0x6b9
watchdog_timer_fn.cold+0x16/0x25
__run_hrtimer+0xa2/0x2d0
</IRQ>
RIP: 0010:__relink_lru+0x102/0x220 [dm_bufio]
__bufio_new+0x11f/0x4f0 [dm_bufio]
new_read+0xa3/0x1e0 [dm_bufio]
dm_bm_read_lock+0x33/0xd0 [dm_persistent_data]
ro_step+0x63/0x100 [dm_persistent_data]
btree_lookup_raw.constprop.0+0x44/0x220 [dm_persistent_data]
dm_btree_lookup+0x16f/0x210 [dm_persistent_data]
dm_thin_find_block+0x12c/0x210 [dm_thin_pool]
__process_bio_read_only+0xc5/0x400 [dm_thin_pool]
process_thin_deferred_bios+0x1a4/0x4a0 [dm_thin_pool]
process_one_work+0x3c5/0x730
Following process may generate a broken btree mixed with fresh and
stale btree nodes, which could get dm thin trapped in an infinite loop
while looking up data block:
Transaction 1: pmd->root = A, A->B->C // One path in btree
pmd->root = X, X->Y->Z // Copy-up
Transaction 2: X,Z is updated on disk, Y write failed.
// Commit failed, dm thin becomes read-only.
process_bio_read_only
dm_thin_find_block
__find_block
dm_btree_lookup(pmd->root)
The pmd->root points to a broken btree, Y may contain stale node
pointing to any block, for example X, which gets dm thin trapped into
a dead loop while looking up Z.
Fix this by setting pmd->root in __open_metadata(), so that dm thin
will use the last transaction's pmd->root if commit failed.
Fetch a reproducer in [Link].
Linke: https://bugzilla.kernel.org/show_bug.cgi?id=216790
Cc: stable@vger.kernel.org
Fixes: 991d9fa02d ("dm: add thin provisioning target")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 34b21d1ddc upstream.
tcp_request_sock_ops structure is specific to IPv4. It should then not
be used with MPTCP subflows on top of IPv6.
For example, it contains the 'family' field, initialised to AF_INET.
This 'family' field is used by TCP FastOpen code to generate the cookie
but also by TCP Metrics, SELinux and SYN Cookies. Using the wrong family
will not lead to crashes but displaying/using/checking wrong things.
Note that 'send_reset' callback from request_sock_ops structure is used
in some error paths. It is then also important to use the correct one
for IPv4 or IPv6.
The slab name can also be different in IPv4 and IPv6, it will be used
when printing some log messages. The slab pointer will anyway be the
same because the object size is the same for both v4 and v6. A
BUILD_BUG_ON() has also been added to make sure this size is the same.
Fixes: cec37a6e41 ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3fff88186f upstream.
To ease the maintenance, it is often recommended to avoid having #ifdef
preprocessor conditions.
Here the section related to CONFIG_MPTCP was quite short but the next
commit needs to add more code around. It is then cleaner to move
specific MPTCP code to functions located in net/mptcp directory.
Now that mptcp_subflow_request_sock_ops structure can be static, it can
also be marked as "read only after init".
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0f4bb431b upstream.
This patch fixes a race if we get two times an socket data ready event
while the listen connection worker is queued. Currently it will be
served only once but we need to do it (in this case twice) until we hit
-EAGAIN which tells us there is no pending accept going on.
This patch wraps an do while loop until we receive a return value which
is different than 0 as it was done before commit d11ccd451b ("fs: dlm:
listen socket out of connection hash").
Cc: stable@vger.kernel.org
Fixes: d11ccd451b ("fs: dlm: listen socket out of connection hash")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08ae0547e7 upstream.
This patch fixes a double sock_release() call when the listen() is
called for the dlm lowcomms listen socket. The caller of
dlm_listen_for_all should never care about releasing the socket if
dlm_listen_for_all() fails, it's done now only once if listen() fails.
Cc: stable@vger.kernel.org
Fixes: 2dc6b1158c ("fs: dlm: introduce generic listen")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b6c14ff1de ]
The Lenovo Yoga Tab 3 (YT3-X90F) is an Intel Cherry Trail based tablet
which ships with Android as Factory OS. Its DSDT contains a bunch of I2C
devices which are not actually there, causing various resource conflicts.
Use acpi_quirk_skip_i2c_client_enumeration() to not enumerate these.
The YT3-X90F has quite a bit of exotic hardware, this adds initial
support by manually instantiating the i2c-clients for the 2 charger +
2 fuel-gauge chips used for the 2 batteries.
Support for other parts of the hw will be added by follow-up patches.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221127182458.104528-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 902ce18ab1 ]
The Medion Lifetab S10346 is a x86 ACPI tablet which ships with Android
x86 as factory OS. Its DSDT contains a bunch of I2C devices which are not
actually there, causing various resource conflicts. Enumeration of these
is skipped through the acpi_quirk_skip_i2c_client_enumeration().
Add support for manually instantiating the I2C devices which are
actually present on this tablet by adding the necessary device info to
the x86-android-tablets module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20221208110224.107354-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a10ba160d4 ]
Commit d69cd7eea9 ("platform/x86: ideapad-laptop: Disable touchpad_switch
for ELAN0634") from Janary 2021 added a flag hiding the touchpad sysfs-attr
and disabling ideapad_sync_touchpad_state() because some devices
"do not use EC to switch touchpad".
At the same time this added a write(VPCCMD_W_TOUCHPAD, 1) call at probe
time on these same devices. This seems to be copied from the rfkill code
which does something similar when hw rfkill support is disabled.
But for the rfkill code this is known to be necessary on some models,
where as for the touchpad control no motivation is given for doing this
and prior to this patch there were no reports of needing to do this.
So this seems unnecessary; and it is best to avoid poking the hardware
unnecessary to avoid unwanted side effects, so remove this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20221117110244.67811-6-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5829f8a897 ]
On recent Ideapad models the EC does not control the touchpad at all,
so instead of sending KEY_TOUCHPAD_ON/ _OFF on touchpad toggle hotkey
events, ideapad-laptop should send KEY_TOUCHPAD_TOGGLE and let userspace
handle the toggling.
Check for this by checking if the value read from VPCCMD_R_TOUCHPAD
actually changes when receiving a touchpad-toggle hotkey event; and
if it does not change send KEY_TOUCHPAD_TOGGLE to userspace to let
userspace enable/disable the touchpad in software.
Note this also drops the priv->features.touchpad_ctrl_via_ec check from
ideapad_sync_touchpad_state() so that KEY_TOUCHPAD_TOGGLE will be send
on laptops where this is not set too. This can be safely dropped now
because the i8042_command(I8042_CMD_AUX_ENABLE/_DISABLE) call is now
guarded by its own feature flag.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20221117110244.67811-5-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c69e7d843d ]
Recently there have been multiple patches to disable the ideapad-laptop's
touchpad control code, because it is causing issues on various laptops:
Commit d69cd7eea9 ("platform/x86: ideapad-laptop: Disable touchpad_switch for ELAN0634")
Commit a231224a60 ("platform/x86: ideapad-laptop: Disable touchpad_switch")
The turning on/off of the ps2 aux port was added specifically for
the IdeaPad Z570, where the EC does toggle the touchpad on/off LED and
toggles the value returned by reading VPCCMD_R_TOUCHPAD, but it does not
actually turn on/off the touchpad.
The ideapad-laptop code really should not be messing with the i8042
controller on all devices just for this special case.
Add a new ctrl_ps2_aux_port flag set based on a DMI based allow-list
for devices which need this workaround, populating it with just
the Ideapad Z570 for now.
This also adds a module parameter so that this behavior can easily
be enabled on other models which may need it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20221117110244.67811-4-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb1836c913 ]
When available prefer native backlight control over vendor backlight
control.
Testing has shown that there are quite a few laptop models which rely
on native backlight control (they don't have ACPI video bus backlight
control) and on which acpi_osi_is_win8() returns false.
Currently __acpi_video_get_backlight_type() returns vendor on these
laptops, leading to an empty /sys/class/backlight.
As a workaround for this acpi_video_backlight_use_native() has been
temporarily changed to always return true.
This re-introduces the problem of having multiple backlight
devices under /sys/class/backlight for a single panel.
Change __acpi_video_get_backlight_type() to prefer native over vendor
when available. So that it returns native on these models.
And change acpi_video_backlight_use_native() back to only return
true when __acpi_video_get_backlight_type() returns native.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5df42521f ]
Simplify __acpi_video_get_backlight_type() removing a nested if which
makes the flow harder to follow.
This also results in having only 1 exit point with
return acpi_backlight_native instead of 2.
Note this drops the (video_caps & ACPI_VIDEO_BACKLIGHT) check from
the if (acpi_osi_is_win8() && native_available) return native path.
Windows 8's hardware certification requirements include that there must
be ACPI video bus backlight control, so the ACPI_VIDEO_BACKLIGHT check
is redundant.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f32e024176 ]
The event data of the WMI event 0xD0, which is assumed to be the
fn_lock, is used to indicate several special keys on newer Yoga 7/9
laptops.
The notify_id 0xD0 is non-unique in the DSDT of the Yoga 9 14IAP7, this
causes wmi_get_event_data() to report wrong values.
Port the ideapad-laptop WMI code to the wmi bus infrastructure which
does not suffer from the shortcomings of wmi_get_event_data().
Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net>
Link: https://lore.kernel.org/r/20221116110647.3438-1-p.jungkamp@gmx.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db5e2a4ca0 ]
Thinklight has only two values, on/off so it's reasonable for
max_brightness to be 0 and 1 as if you write anything between 0 and 255
it will be 255 anyway so there's no point for it to be 255.
This may look like it is a userspace API change, but writes with
a value larget then the new max_brightness will still be accepted,
these will be silently clamped to the new max_brightness by
led_set_brightness_nosleep(). So no userspace API problems are
expected.
Reported-by: Michał Szczepaniak <m.szczepaniak.000@gmail.com>
Link: https://lore.kernel.org/platform-driver-x86/55400326-e64f-5444-94e5-22b8214d00b6@gmail.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4517c4f34 ]
The Dell Latiture 3340/3440/3540 laptops with Realtek ALC3204 have
dual codecs and need the ALC1220_FIXUP_GB_DUAL_CODECS to fix the
conflicts of Master controls. The existing headset mic fixup for
Dell is also required to enable the jack sense and the headset mic.
Introduce a new fixup to fix the dual codec and headset mic issues
for particular Dell laptops since other old Dell laptops with the
same codec configuration are already well handled by the fixup in
alc269_fallback_pin_fixup_tbl[].
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221226114303.4027500-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2912cdda73 ]
The Dell Inspiron Plus 16, in both laptop and 2in1 form factor, has top
speakers connected on NID 0x17, which the codec reports as unconnected.
These speakers should be connected to the DAC on NID 0x03.
Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net>
Link: https://lore.kernel.org/r/20221205163713.7476-1-p.jungkamp@gmx.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: a4517c4f34 ("ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c123c567f ]
The bpf_prog_map_compatible() check makes sure that BPF program types are
not mixed inside BPF map types that can contain programs (tail call maps,
cpumaps and devmaps). It does this by setting the fields of the map->owner
struct to the values of the first program being checked against, and
rejecting any subsequent programs if the values don't match.
One of the values being set in the map owner struct is the program type,
and since the code did not resolve the prog type for fext programs, the map
owner type would be set to PROG_TYPE_EXT and subsequent loading of programs
of the target type into the map would fail.
This bug is seen in particular for XDP programs that are loaded as
PROG_TYPE_EXT using libxdp; these cannot insert programs into devmaps and
cpumaps because the check fails as described above.
Fix the bug by resolving the fext program type to its target program type
as elsewhere in the verifier.
v3:
- Add Yonghong's ACK
Fixes: f45d5b6ce2 ("bpf: generalise tail call map compatibility check")
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221214230254.790066-1-toke@redhat.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d3f3c2fe54 upstream.
During error on CLOSE_INSTANCE command, ctx_work_bits was not getting
cleared. During consequent mfc execution NULL pointer dereferencing of
this context led to kernel panic. This patch fixes this issue by making
sure to clear ctx_work_bits always.
Fixes: 818cd91ab8 ("[media] s5p-mfc: Extract open/close MFC instance commands")
Cc: stable@vger.kernel.org
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8a46bc4e1 upstream.
On receiving last buffer driver puts MFC to MFCINST_FINISHING state which
in turn skips transferring of frame from SRC to REF queue. This causes
driver to stop MFC encoding and last frame is lost.
This patch guarantees safe handling of frames during MFCINST_FINISHING and
correct clearing of workbit to avoid early stopping of encoding.
Fixes: af93574678 ("[media] MFC: Add MFC 5.1 V4L2 driver")
Cc: stable@vger.kernel.org
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27e714c007 upstream.
In 27cfa25895 "ext2: fix fs corruption when trying to remove
a non-empty directory with IO error" a funny thing has happened:
- page = ext2_get_page(inode, i, dir_has_error, &page_addr);
+ page = ext2_get_page(inode, i, 0, &page_addr);
- if (IS_ERR(page)) {
- dir_has_error = 1;
- continue;
- }
+ if (IS_ERR(page))
+ goto not_empty;
And at not_empty: we hit ext2_put_page(page, page_addr), which does
put_page(page). Which, unless I'm very mistaken, should oops
immediately when given ERR_PTR(-E...) as page.
OK, shit happens, insufficiently tested patches included. But when
commit in question describes the fault-injection test that exercised
that particular failure exit...
Ow.
CC: stable@vger.kernel.org
Fixes: 27cfa25895 ("ext2: fix fs corruption when trying to remove a non-empty directory with IO error")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c51054896 upstream.
In cpufreq_policy_alloc(), it will call uninitialed completion in
cpufreq_sysfs_release() when kobject_init_and_add() fails. And
that will cause a crash such as the following page fault in complete:
BUG: unable to handle page fault for address: fffffffffffffff8
[..]
RIP: 0010:complete+0x98/0x1f0
[..]
Call Trace:
kobject_put+0x1be/0x4c0
cpufreq_online.cold+0xee/0x1fd
cpufreq_add_dev+0x183/0x1e0
subsys_interface_register+0x3f5/0x4e0
cpufreq_register_driver+0x3b7/0x670
acpi_cpufreq_init+0x56c/0x1000 [acpi_cpufreq]
do_one_initcall+0x13d/0x780
do_init_module+0x1c3/0x630
load_module+0x6e67/0x73b0
__do_sys_finit_module+0x181/0x240
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 4ebe36c94a ("cpufreq: Fix kobject memleak")
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 5.2+ <stable@vger.kernel.org> # 5.2+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fdded8448 upstream.
The member void *data in the structure devfreq can be overwrite
by governor_userspace. For example:
1. The device driver assigned the devfreq governor to simple_ondemand
by the function devfreq_add_device() and init the devfreq member
void *data to a pointer of a static structure devfreq_simple_ondemand_data
by the function devfreq_add_device().
2. The user changed the devfreq governor to userspace by the command
"echo userspace > /sys/class/devfreq/.../governor".
3. The governor userspace alloced a dynamic memory for the struct
userspace_data and assigend the member void *data of devfreq to
this memory by the function userspace_init().
4. The user changed the devfreq governor back to simple_ondemand
by the command "echo simple_ondemand > /sys/class/devfreq/.../governor".
5. The governor userspace exited and assigned the member void *data
in the structure devfreq to NULL by the function userspace_exit().
6. The governor simple_ondemand fetched the static information of
devfreq_simple_ondemand_data in the function
devfreq_simple_ondemand_func() but the member void *data of devfreq was
assigned to NULL by the function userspace_exit().
7. The information of upthreshold and downdifferential is lost
and the governor simple_ondemand can't work correctly.
The member void *data in the structure devfreq is designed for
a static pointer used in a governor and inited by the function
devfreq_add_device(). This patch add an element named governor_data
in the devfreq structure which can be used by a governor(E.g userspace)
who want to assign a private data to do some private things.
Fixes: ce26c5bb95 ("PM / devfreq: Add basic governors")
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Chanwoo Choi <cwchoi00@gmail.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kant Fan <kant@allwinnertech.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f576b2593 upstream.
Now that we have get_random_u32_below(), it's nearly trivial to make
inline helpers to compute get_random_u32_above() and
get_random_u32_inclusive(), which will help clean up open coded loops
and manual computations throughout the tree.
One snag is that in order to make get_random_u32_inclusive() operate on
closed intervals, we have to do some (unlikely) special case handling if
get_random_u32_inclusive(0, U32_MAX) is called. The least expensive way
of doing this is actually to adjust the slowpath of
get_random_u32_below() to have its undefined 0 result just return the
output of get_random_u32(). We can make this basically free by calling
get_random_u32() before the branch, so that the branch latency gets
interleaved.
Cc: stable@vger.kernel.org # to ease future backports that use this api
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc1b705b0e upstream.
AMD's MCA Thresholding feature counts errors of all severity levels, not
just correctable errors. If a deferred error causes the threshold limit
to be reached (it was the error that caused the overflow), then both a
deferred error interrupt and a thresholding interrupt will be triggered.
The order of the interrupts is not guaranteed. If the threshold
interrupt handler is executed first, then it will clear MCA_STATUS for
the error. It will not check or clear MCA_DESTAT which also holds a copy
of the deferred error. When the deferred error interrupt handler runs it
will not find an error in MCA_STATUS, but it will find the error in
MCA_DESTAT. This will cause two errors to be logged.
Check for deferred errors when handling a threshold interrupt. If a bank
contains a deferred error, then clear the bank's MCA_DESTAT register.
Define a new helper function to do the deferred error check and clearing
of MCA_DESTAT.
[ bp: Simplify, convert comment to passive voice. ]
Fixes: 37d43acfd7 ("x86/mce/AMD: Redo error logging from APIC LVT interrupt handlers")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220621155943.33623-1-yazen.ghannam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25836ce1df upstream.
Newer AMD systems, such as Genoa, can support up to 12 channels per EDAC
"mc" device. These are detected by the device's EDAC module, and the
current EDAC interface is properly enumerated. However, the legacy EDAC
sysfs interface provides device attributes only for channels 0 to 7.
Therefore, channels 8 to 11 will not be visible in the legacy interface.
This was overlooked in the initial support for AMD Genoa.
Add additional device attributes so that up to 12 channels are visible
in the legacy EDAC sysfs interface.
Fixes: e2be5955a8 ("EDAC/amd64: Add support for AMD Family 19h Models 10h-1Fh and A0h-AFh")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221018153630.14664-1-yazen.ghannam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
