The SMCCC does not allow the SMC64 calling convention to be used from
AArch32. While KVM checks to see if the calling convention is allowed in
PSCI_1_0_FN_PSCI_FEATURES, it does not actually prevent calls to
unadvertised PSCI v1.0+ functions.
Hoist the check to see if the requested function is allowed into
kvm_psci_call(), thereby preventing SMC64 calls from AArch32 for all
PSCI versions.
Bug: 254441685
Fixes: d43583b890 ("KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest")
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220322183538.2757758-3-oupton@google.com
(cherry picked from commit 827c2ab331)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I0f2909827c481850014d6bdab321ff107d59196d
The only valid calling SMC calling convention from an AArch32 state is
SMC32. Disallow any PSCI function that sets the SMC64 function ID bit
when called from AArch32 rather than comparing against known SMC64 PSCI
functions.
Note that without this change KVM advertises the SMC64 flavor of
SYSTEM_RESET2 to AArch32 guests.
Bug: 254441685
Fixes: d43583b890 ("KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest")
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220322183538.2757758-2-oupton@google.com
(cherry picked from commit 2da0aebc74)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I9cf0a30d93c5627bf0f4042e98bb1640c61ea156
The way KVM drives GICv4.{0,1} is as follows:
- vcpu_load() makes the VPE resident, instructing the RD to start
scanning for interrupts
- just before entering the guest, we check that the RD has finished
scanning and that we can start running the vcpu
- on preemption, we deschedule the VPE by making it invalid on
the RD
However, we are preemptible between the first two steps. If it so
happens *and* that the RD was still scanning, we nonetheless write
to the GICR_VPENDBASER register while Dirty is set, and bad things
happen (we're in UNPRED land).
This affects both the 4.0 and 4.1 implementations.
Make sure Dirty is cleared before performing the deschedule,
meaning that its_clear_vpend_valid() becomes a sort of full VPE
residency barrier.
Bug: 254441685
Reported-by: Jingyi Wang <wangjingyi11@huawei.com>
Tested-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 57e3cebd02 ("KVM: arm64: Delay the polling of the GICR_VPENDBASER.Dirty bit")
Link: https://lore.kernel.org/r/4aae10ba-b39a-5f84-754b-69c2eb0a2c03@huawei.com
(cherry picked from commit af27e41612)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: Ic49d107d9a60a840d1eb36a9b8902be7b52f31cf
After waking up a suspended VM, the kernel prints the following trace
for virtio drivers which do not directly call virtio_device_ready() in
the .restore:
PM: suspend exit
irq 22: nobody cared (try booting with the "irqpoll" option)
Call Trace:
<IRQ>
dump_stack_lvl+0x38/0x49
dump_stack+0x10/0x12
__report_bad_irq+0x3a/0xaf
note_interrupt.cold+0xb/0x60
handle_irq_event+0x71/0x80
handle_fasteoi_irq+0x95/0x1e0
__common_interrupt+0x6b/0x110
common_interrupt+0x63/0xe0
asm_common_interrupt+0x1e/0x40
? __do_softirq+0x75/0x2f3
irq_exit_rcu+0x93/0xe0
sysvec_apic_timer_interrupt+0xac/0xd0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x12/0x20
arch_cpu_idle+0x12/0x20
default_idle_call+0x39/0xf0
do_idle+0x1b5/0x210
cpu_startup_entry+0x20/0x30
start_secondary+0xf3/0x100
secondary_startup_64_no_verify+0xc3/0xcb
</TASK>
handlers:
[<000000008f9bac49>] vp_interrupt
[<000000008f9bac49>] vp_interrupt
Disabling IRQ #22
This happens because we don't invoke .enable_cbs callback in
virtio_device_restore(). That callback is used by some transports
(e.g. virtio-pci) to enable interrupts.
Let's fix it, by calling virtio_device_ready() as we do in
virtio_dev_probe(). This function calls .enable_cts callback and sets
DRIVER_OK status bit.
This fix also avoids setting DRIVER_OK twice for those drivers that
call virtio_device_ready() in the .restore.
Bug: 254441685
Fixes: d50497eb4e ("virtio_config: introduce a new .enable_cbs method")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220322114313.116516-1-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 8d65bc9a5b)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I89850c4c2aab1a7ce307c2a52e9149c5fd757ce9
Any registered clk_core structure can have a NULL pointer in its dev
field. While never actually documented, this is evidenced by the wide
usage of clk_register and clk_hw_register with a NULL device pointer,
and the fact that the core of_clk_hw_register() function also passes a
NULL device pointer.
A call to clk_hw_get_clk() on a clk_hw struct whose clk_core is in that
case will result in a NULL pointer derefence when it calls dev_name() on
that NULL device pointer.
Add a test for this case and use NULL as the dev_id if the device
pointer is NULL.
Bug: 254441685
Fixes: 30d6f8c15d ("clk: add api to get clk consumer from clk_hw")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220225143534.405820-2-maxime@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
(cherry picked from commit 0c1b56df45)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I8408cc0313279dc4f814db4dd365232b3fb800eb
We may call arm64_apply_bp_hardening() early during entry (e.g. in
el0_ia()) before it is safe to run instrumented code. Unfortunately this
may result in running instrumented code in two cases:
* The hardening callbacks called by arm64_apply_bp_hardening() are not
marked as `noinstr`, and have been observed to be instrumented when
compiled with either GCC or LLVM.
* Since arm64_apply_bp_hardening() itself is only marked as `inline`
rather than `__always_inline`, it is possible that the compiler
decides to place it out-of-line, whereupon it may be instrumented.
For example, with defconfig built with clang 13.0.0,
call_hvc_arch_workaround_1() is compiled as:
| <call_hvc_arch_workaround_1>:
| d503233f paciasp
| f81f0ffe str x30, [sp, #-16]!
| 320183e0 mov w0, #0x80008000
| d503201f nop
| d4000002 hvc #0x0
| f84107fe ldr x30, [sp], #16
| d50323bf autiasp
| d65f03c0 ret
... but when CONFIG_FTRACE=y and CONFIG_KCOV=y this is compiled as:
| <call_hvc_arch_workaround_1>:
| d503245f bti c
| d503201f nop
| d503201f nop
| d503233f paciasp
| a9bf7bfd stp x29, x30, [sp, #-16]!
| 910003fd mov x29, sp
| 94000000 bl 0 <__sanitizer_cov_trace_pc>
| 320183e0 mov w0, #0x80008000
| d503201f nop
| d4000002 hvc #0x0
| a8c17bfd ldp x29, x30, [sp], #16
| d50323bf autiasp
| d65f03c0 ret
... with a patchable function entry registered with ftrace, and a direct
call to __sanitizer_cov_trace_pc(). Neither of these are safe early
during entry sequences.
This patch avoids the unsafe instrumentation by marking
arm64_apply_bp_hardening() as `__always_inline` and by marking the
hardening functions as `noinstr`. This avoids the potential for
instrumentation, and causes clang to consistently generate the function
as with the defconfig sample.
Note: in the defconfig compilation, when CONFIG_SVE=y, x30 is spilled to
the stack without being placed in a frame record, which will result in a
missing entry if call_hvc_arch_workaround_1() is backtraced. Similar is
true of qcom_link_stack_sanitisation(), where inline asm spills the LR
to a GPR prior to corrupting it. This is not a significant issue
presently as we will only backtrace here if an exception is taken, and
in such cases we may omit entries for other reasons today.
The relevant hardening functions were introduced in commits:
ec82b567a7 ("arm64: Implement branch predictor hardening for Falkor")
b092201e00 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support")
... and these were subsequently moved in commit:
d4647f0a2a ("arm64: Rewrite Spectre-v2 mitigation code")
The arm64_apply_bp_hardening() function was introduced in commit:
0f15adbb28 ("arm64: Add skeleton to harden the branch predictor against aliasing attacks")
... and was subsequently moved and reworked in commit:
6279017e80 ("KVM: arm64: Move BP hardening helpers into spectre.h")
Bug: 254441685
Fixes: ec82b567a7 ("arm64: Implement branch predictor hardening for Falkor")
Fixes: b092201e00 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support")
Fixes: d4647f0a2a ("arm64: Rewrite Spectre-v2 mitigation code")
Fixes: 0f15adbb28 ("arm64: Add skeleton to harden the branch predictor against aliasing attacks")
Fixes: 6279017e80 ("KVM: arm64: Move BP hardening helpers into spectre.h")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220224181028.512873-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
(cherry picked from commit 614c0b9fee)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: Ib0365be8e3cf38e13dba0664c00b3935427ee878
Although kptr_restrict is set to 0 and the kernel is booted with
no_hash_pointers parameter, the content of /proc/vmallocinfo is
lacking the real addresses.
/ # cat /proc/vmallocinfo
0x(ptrval)-0x(ptrval) 8192 load_module+0xc0c/0x2c0c pages=1 vmalloc
0x(ptrval)-0x(ptrval) 12288 start_kernel+0x4e0/0x690 pages=2 vmalloc
0x(ptrval)-0x(ptrval) 12288 start_kernel+0x4e0/0x690 pages=2 vmalloc
0x(ptrval)-0x(ptrval) 8192 _mpic_map_mmio.constprop.0+0x20/0x44 phys=0x80041000 ioremap
0x(ptrval)-0x(ptrval) 12288 _mpic_map_mmio.constprop.0+0x20/0x44 phys=0x80041000 ioremap
...
According to the documentation for /proc/sys/kernel/, %pK is
equivalent to %p when kptr_restrict is set to 0.
Bug: 254441685
Fixes: 5ead723a20 ("lib/vsprintf: no_hash_pointers prints all addresses as unhashed")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/107476128e59bff11a309b5bf7579a1753a41aca.1645087605.git.christophe.leroy@csgroup.eu
(cherry picked from commit 8484291132)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I2848b0289fe5218a38de1799d206736ef505eb0c
The PSCI specification defines only a 32-bit function ID for the
MEM_PROTECT call used to protect against cold reboot attacks.
Fix the pKVM hypervisor invocation of MEM_PROTECT to use the 32-bit
function ID instead of the unallocated 64-bit flavour.
Bug: 260316363
Signed-off-by: Will Deacon <willdeacon@google.com>
Change-Id: I675a57419064f7f006960ca5370e9dc2d5279a90
commit 9cb636b5f6 upstream.
A race condition may occur if the user calls close() on another thread
during a write() operation on the device node of the efi capsule.
This is a race condition that occurs between the efi_capsule_write() and
efi_capsule_flush() functions of efi_capsule_fops, which ultimately
results in UAF.
So, the page freeing process is modified to be done in
efi_capsule_release() instead of efi_capsule_flush().
Bug: 246690517
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Link: https://lore.kernel.org/all/20220907102920.GA88602@ubuntu/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I6b11df91a87c027ebed4a7b239610a9b9e28cec0
syzbot found another way to trigger the infamous WARN_ON_ONCE(delta < len)
in skb_try_coalesce() [1]
I was able to root cause the issue to kfence.
When kfence is in action, the following assertion is no longer true:
int size = xxxx;
void *ptr1 = kmalloc(size, gfp);
void *ptr2 = kmalloc(size, gfp);
if (ptr1 && ptr2)
ASSERT(ksize(ptr1) == ksize(ptr2));
We attempted to fix these issues in the blamed commits, but forgot
that TCP was possibly shifting data after skb_unclone_keeptruesize()
has been used, notably from tcp_retrans_try_collapse().
So we not only need to keep same skb->truesize value,
we also need to make sure TCP wont fill new tailroom
that pskb_expand_head() was able to get from a
addr = kmalloc(...) followed by ksize(addr)
Split skb_unclone_keeptruesize() into two parts:
1) Inline skb_unclone_keeptruesize() for the common case,
when skb is not cloned.
2) Out of line __skb_unclone_keeptruesize() for the 'slow path'.
WARNING: CPU: 1 PID: 6490 at net/core/skbuff.c:5295 skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295
Modules linked in:
CPU: 1 PID: 6490 Comm: syz-executor161 Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295
Code: bf 01 00 00 00 0f b7 c0 89 c6 89 44 24 20 e8 62 24 4e fa 8b 44 24 20 83 e8 01 0f 85 e5 f0 ff ff e9 87 f4 ff ff e8 cb 20 4e fa <0f> 0b e9 06 f9 ff ff e8 af b2 95 fa e9 69 f0 ff ff e8 95 b2 95 fa
RSP: 0018:ffffc900063af268 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 00000000ffffffd5 RCX: 0000000000000000
RDX: ffff88806fc05700 RSI: ffffffff872abd55 RDI: 0000000000000003
RBP: ffff88806e675500 R08: 00000000ffffffd5 R09: 0000000000000000
R10: ffffffff872ab659 R11: 0000000000000000 R12: ffff88806dd554e8
R13: ffff88806dd9bac0 R14: ffff88806dd9a2c0 R15: 0000000000000155
FS: 00007f18014f9700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020002000 CR3: 000000006be7a000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tcp_try_coalesce net/ipv4/tcp_input.c:4651 [inline]
tcp_try_coalesce+0x393/0x920 net/ipv4/tcp_input.c:4630
tcp_queue_rcv+0x8a/0x6e0 net/ipv4/tcp_input.c:4914
tcp_data_queue+0x11fd/0x4bb0 net/ipv4/tcp_input.c:5025
tcp_rcv_established+0x81e/0x1ff0 net/ipv4/tcp_input.c:5947
tcp_v4_do_rcv+0x65e/0x980 net/ipv4/tcp_ipv4.c:1719
sk_backlog_rcv include/net/sock.h:1037 [inline]
__release_sock+0x134/0x3b0 net/core/sock.c:2779
release_sock+0x54/0x1b0 net/core/sock.c:3311
sk_wait_data+0x177/0x450 net/core/sock.c:2821
tcp_recvmsg_locked+0xe28/0x1fd0 net/ipv4/tcp.c:2457
tcp_recvmsg+0x137/0x610 net/ipv4/tcp.c:2572
inet_recvmsg+0x11b/0x5e0 net/ipv4/af_inet.c:850
sock_recvmsg_nosec net/socket.c:948 [inline]
sock_recvmsg net/socket.c:966 [inline]
sock_recvmsg net/socket.c:962 [inline]
____sys_recvmsg+0x2c4/0x600 net/socket.c:2632
___sys_recvmsg+0x127/0x200 net/socket.c:2674
__sys_recvmsg+0xe2/0x1a0 net/socket.c:2704
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Bug: 254441685
Fixes: c4777efa75 ("net: add and use skb_unclone_keeptruesize() helper")
Fixes: 097b9146c0 ("net: fix up truesize of cloned skb in skb_prepare_for_shift()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(cherry picked from commit 2b88cba558)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I8f7aafd6f644cac9137d592729f31574649a0327
We have multiple places where this helper is convenient,
and plan using it in the following patch.
Bug: 254441685
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(cherry picked from commit 763087dab9)
[Lee: Solves a dependency for the next Fixes: patch]
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I044e7020f9d0b85073253fbd4629cf97bbd38736
Signed-off-by: Lee Jones <joneslee@google.com>
Prior to commit defe21f49b ("KVM: arm64: Move PC rollback on SError to
HYP"), when an SError is synchronised due to another exception, KVM
handles the SError first. If the guest survives, the instruction that
triggered the original exception is re-exectued to handle the first
exception. HVC is treated as a special case as the instruction wouldn't
normally be re-exectued, as its not a trap.
Commit defe21f49b didn't preserve the behaviour of the 'return 1'
that skips the rest of handle_exit().
Since commit defe21f49b, KVM will try to handle the SError and the
original exception at the same time. When the exception was an HVC,
fixup_guest_exit() has already rolled back ELR_EL2, meaning if the
guest has virtual SError masked, it will execute and handle the HVC
twice.
Restore the original behaviour.
Bug: 254441685
Fixes: defe21f49b ("KVM: arm64: Move PC rollback on SError to HYP")
Cc: stable@vger.kernel.org
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127122052.1584324-4-james.morse@arm.com
(cherry picked from commit 1229630af8)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I04ff663f94b2eb68bb36fbc1e962bd1b9e0f0bfb
When any exception other than an IRQ occurs, the CPU updates the ESR_EL2
register with the exception syndrome. An SError may also become pending,
and will be synchronised by KVM. KVM notes the exception type, and whether
an SError was synchronised in exit_code.
When an exception other than an IRQ occurs, fixup_guest_exit() updates
vcpu->arch.fault.esr_el2 from the hardware register. When an SError was
synchronised, the vcpu esr value is used to determine if the exception
was due to an HVC. If so, ELR_EL2 is moved back one instruction. This
is so that KVM can process the SError first, and re-execute the HVC if
the guest survives the SError.
But if an IRQ synchronises an SError, the vcpu's esr value is stale.
If the previous non-IRQ exception was an HVC, KVM will corrupt ELR_EL2,
causing an unrelated guest instruction to be executed twice.
Check ARM_EXCEPTION_CODE() before messing with ELR_EL2, IRQs don't
update this register so don't need to check.
Bug: 254441685
Fixes: defe21f49b ("KVM: arm64: Move PC rollback on SError to HYP")
Cc: stable@vger.kernel.org
Reported-by: Steven Price <steven.price@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127122052.1584324-3-james.morse@arm.com
(cherry picked from commit 1c71dbc8a1)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: Icd1c7922988bc79d0c04f1b78f41ac89357ec79a
With some chargers, vbus might momentarily raise above VSAFE5V and fall
back to 0V causing VSAFE0V to be triggered. This will
will report a VBUS off event causing TCPM to transition to
SNK_UNATTACHED state where it should be waiting in either SNK_ATTACH_WAIT
or SNK_DEBOUNCED state. This patch makes TCPM avoid VSAFE0V events
while in SNK_ATTACH_WAIT or SNK_DEBOUNCED state.
Stub from the spec:
"4.5.2.2.4.2 Exiting from AttachWait.SNK State
A Sink shall transition to Unattached.SNK when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce.
A DRP shall transition to Unattached.SRC when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce."
[23.194131] CC1: 0 -> 0, CC2: 0 -> 5 [state SNK_UNATTACHED, polarity 0, connected]
[23.201777] state change SNK_UNATTACHED -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
[23.209949] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS]
[23.300579] VBUS off
[23.300668] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [rev3 NONE_AMS]
[23.301014] VBUS VSAFE0V
[23.301111] Start toggling
Bug: 254441685
Fixes: 28b43d3d74 ("usb: typec: tcpm: Introduce vsafe0v for vbus")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20220122015520.332507-2-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 746f96e7d6)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: Idb8a2ff631e9fdca87aca6b923e5a67923fcd3c3
With the AMS and Collision Avoidance, tcpm often needs to change the CC's
termination. When one CC line is sourcing Vconn, if we still change its
termination, the voltage of the another CC line is likely to be fluctuant
and unstable.
Therefore, we should verify whether a CC line is sourcing Vconn before
changing its termination and only change the termination that is not
a Vconn line. This can be done by reading the Vconn Present bit of
POWER_ STATUS register. To determine the polarity, we can read the
Plug Orientation bit of TCPC_CONTROL register. Since Vconn can only be
sourced if Plug Orientation is set.
Bug: 254441685
Fixes: 0908c5aca3 ("usb: typec: tcpm: AMS and Collision Avoidance")
cc: <stable@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20220113092943.752372-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 5638b0dfb6)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I99269bf66fea9735b1227386f8beafce4187b9f4
Mute the warning from "make dtbs_check":
larb@14017000: clock-names: ['apb', 'smi'] is too short
arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
...
larb@16010000: clock-names: ['apb', 'smi'] is too short
arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
larb@17010000: clock-names: ['apb', 'smi'] is too short
arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dt.yaml
If a platform's larb supports gals, there will be some larbs have one
more "gals" clock while the others still only need "apb"/"smi" clocks,
then the minItems for clocks and clock-names are 2.
Bug: 254441685
Fixes: 27bb0e4285 ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220113111057.29918-4-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
(cherry picked from commit 996ebc0e33)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I04c75dbb321cabb23176afff57ae46df235141f9
Mute the warning from "make dtbs_check":
larb@14016000: 'mediatek,larb-id' is a required property
arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
larb@15001000: 'mediatek,larb-id' is a required property
arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
larb@16010000: 'mediatek,larb-id' is a required property
arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
As the description of mediatek,larb-id, the property is only
required when the larbid is not consecutive from its IOMMU point of view.
Also, from the description of mediatek,larbs in
Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml, all the larbs
must sort by the larb index.
In mt8167, there is only one IOMMU HW and three larbs. The drivers already
know its larb index from the mediatek,larbs property of IOMMU, thus no
need this property.
Bug: 254441685
Fixes: 27bb0e4285 ("dt-bindings: memory: mediatek: Convert SMI to DT schema")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220113111057.29918-3-yong.wu@mediatek.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
(cherry picked from commit ddc3a32488)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I31ba0772a094d73c3368505e291abb9b36f3129b
Since commit 57fd251c78 ("kbuild: split cc-option and friends to
scripts/Makefile.compiler"), some kselftests fail to build.
The tools/ directory opted out Kbuild, and went in a different
direction. People copied scripts and Makefiles to the tools/ directory
to create their own build system.
tools/build/Build.include mimics scripts/Kbuild.include, but some
tool Makefiles include the Kbuild one to import a feature that is
missing in tools/build/Build.include:
- Commit ec04aa3ae8 ("tools/thermal: tmon: use "-fstack-protector"
only if supported") included scripts/Kbuild.include from
tools/thermal/tmon/Makefile to import the cc-option macro.
- Commit c2390f16fc ("selftests: kvm: fix for compilers that do
not support -no-pie") included scripts/Kbuild.include from
tools/testing/selftests/kvm/Makefile to import the try-run macro.
- Commit 9cae4ace80 ("selftests/bpf: do not ignore clang
failures") included scripts/Kbuild.include from
tools/testing/selftests/bpf/Makefile to import the .DELETE_ON_ERROR
target.
- Commit 0695f8bca9 ("selftests/powerpc: Handle Makefile for
unrecognized option") included scripts/Kbuild.include from
tools/testing/selftests/powerpc/pmu/ebb/Makefile to import the
try-run macro.
Copy what they need into tools/build/Build.include, and make them
include it instead of scripts/Kbuild.include.
Bug: 254441685
Link: https://lore.kernel.org/lkml/86dadf33-70f7-a5ac-cb8c-64966d2f45a1@linux.ibm.com/
Fixes: 57fd251c78 ("kbuild: split cc-option and friends to scripts/Makefile.compiler")
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Yonghong Song <yhs@fb.com>
(cherry picked from commit b61442df74)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: Ie17d3ba0bb20a7457a31d10a7c09163aa10e0ea4
Commit aec6c60a01 ("kbuild: check the minimum compiler version in
Kconfig") changed how the script detects the compiler version.
Get 'make CROSS_COMPILE=scripts/dummy-tools/' back working again.
Bug: 254441685
Fixes: aec6c60a01 ("kbuild: check the minimum compiler version in Kconfig")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
(cherry picked from commit f9bc754be4)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I0ce942de1dbc16dd8b974296bc2fd3cc703e49e5
Commit cd195bc477 ("kbuild: split adjust_autoksyms.sh in two parts")
split out the code that needs include/config/auto.conf.
This script no longer needs to include include/config/auto.conf.
Bug: 254441685
Fixes: cd195bc477 ("kbuild: split adjust_autoksyms.sh in two parts")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
(cherry picked from commit 12e9dea6c9)
Signed-off-by: Lee Jones <joneslee@google.com>
Change-Id: I1c2cb44a3266e935f1c23cf8c4edd90ca1a05a0f
Enable the UVC function driver to allow USB gadgets
to connect as a standard video device to a host.
Bug: 200712777
Bug: 242344221
Signed-off-by: Dan Vacura <w36195@motorola.com>
Change-Id: Ia037f8560664f9e98f28f3fede609764d5d5699d
(cherry picked from commit 8d5dd0a5a4)
(cherry picked from commit 885f16fab68e456b9dc9856641b706ce17551456)
NUMA support with speculative page faults might be broken if
vma_replace_policy() replaces the mempolicy object used in
do_anonymous_page()
alloc_zeroed_user_highpage_movable()
alloc_page_vma()
alloc_pages_vma()
get_vma_policy()
__get_vma_policy() in speculative path does not always refcounts the
mempolicy object, therefore can't be relied on stabilizing it.
Rather than fixing this, just disable speculation for CONFIG_NUMA
for now and fix it if it's ever needed in Android.
Bug: 257443051
Change-Id: Ib5750b9809979a69a42ebfa6c130e123f416f1aa
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Invalid condition was introduced when porting the original SPF patch
which would affect NUMA mode.
Fixes: 736ae8bde8 ("FROMLIST: mm: adding speculative page fault failure trace events")
Bug: 257443051
Change-Id: Ib20c625615b279dc467588933a1f598dc179861b
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
move_page_tables() can move entire pmd or pud without locking individual
ptes. This is problematic for speculative page faults which do not take
mmap_lock because they rely on ptl lock when writing new pte value. To
avoid possible race, disable move_page_tables() optimization when
CONFIG_SPECULATIVE_PAGE_FAULT is enabled.
Bug: 257443051
Change-Id: Ib48dda08ecad1abc60d08fc089a6566a63393c13
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
vm_write_{begin|end} has to be called when mmap_lock is taken
exlusively. Add an assert statement in vm_write_begin to enforce
that. free_pgtables can free page tables without exclusive mmap_lock
if the vma was isolated, therefore avoid assertions in such cases.
Bug: 257443051
Change-Id: Ie81aefe025c743cda6f66717d2f08f4d78a55608
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
In a number of cases vm_write_{begin|end} is called while mmap_lock is
not owned exclusively. This is unnecessary and can affect correctness of
the sequence counting protecting speculative page fault handlers. Remove
extra calls.
Bug: 257443051
Change-Id: I1278638a0794448e22fbdab5601212b3b2eaebdc
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Speculative page fault handler needs to detect concurrent pmd changes
and relies on vma seqcount for that. pmdp_collapse_flush(), set_huge_pmd() and collapse_and_free_pmd() can modify a pmd.
vm_write_{begin|end} are needed in the paths which can call these
functions for page fault handler to detect pmd changes.
Bug: 257443051
Change-Id: Ieb784b5f44901b66a594f61b9e7c91190ff97f80
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Extend filemap_fault() to handle speculative faults.
In the speculative case, we will only be fishing existing pages out of
the page cache. The logic we use mirrors what is done in the
non-speculative case, assuming that pages are found in the page cache,
are up to date and not already locked, and that readahead is not
necessary at this time. In all other cases, the fault is aborted to be
handled non-speculatively.
Signed-off-by: Michel Lespinasse <michel@lespinasse.org>
Link: https://lore.kernel.org/all/20210407014502.24091-26-michel@lespinasse.org/
Conflicts:
mm/filemap.c
1. Added back file_ra_state variable used by SPF path.
2. Updated comment for filemap_fault to reflect SPF locking rules.
Bug: 161210518
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: I82eba7fcfc81876245c2e65bc5ae3d33ddfcc368
Checks of pmd during speculative page fault handling are racy because
pmd is unprotected and might be modified or cleared. This might cause
use-after-free reads from speculative path, therefore prevent such
checks. At the beginning of speculation pmd is checked to be valid and
if it's changed before page fault is handled, the change will be detected
and page fault will be retried under mmap_lock protection.
Bug: 257443051
Change-Id: I0cbd3b0b44e8296cf0d6cb298fae48c696580068
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
handle_userfault() should be protected against a concurrent
userfaultfd_release(), therefore handling a userfaults speculatively
without mmap_lock protection should be disallowed.
Bug: 257443051
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: Ic6ae39329c73e8849048ea15b5351a49346404d3
Speculative page fault checks pmd to be valid before starting to handle
the page fault and pte_alloc() should do nothing if pmd stays valid.
If pmd gets changed during speculative page fault, we will detect the
change later and retry with mmap_lock. Therefore pte_alloc() can be
safely skipped and this prevents the racy pmd_lock() call which can
access pmd->ptl after pmd was cleared.
Bug: 257443051
Change-Id: Iec57df5530dba6e0e0bdf9f7500f910851c3d3fd
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
When a task yields, it relinquishes the cpu and
scheduler is tasked to find another task.
However our vendor scheduler logic implementation
could return the same task leading to a loop where
the yielded task gets to run back, so add hook point
in do_sched_yield() for vendor can do some work
before task is scheduled.
Bug: 205804537
Change-Id: I6528c3f4b0ee360559ef9c97cb1eb2b2d1357870
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Signed-off-by: Sai Harshini Nimmala <quic_snimmala@quicinc.com>
Signed-off-by: Khalid Shaik <khalid.s@samsung.com>
