commit b41c1fa155ba56d125885b0191aabaf3c508d0a3 upstream.
TIOCGSERIAL is an ioctl. Thus it must be atomic. It returns
two values. Racing with set_serial it can return an inconsistent
result. The mutex must be taken.
In terms of logic the bug is as old as the driver. In terms of
code it goes back to the conversion to the get_serial and
set_serial methods.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Fixes: 99f75a1fcd ("cdc-acm: switch to ->[sg]et_serial()")
Link: https://lore.kernel.org/r/20240912141916.1044393-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit faa2e484b393c56bc1243dca6676a70bc485f775 upstream.
All USB devices supported by rtw88 have the same problem: they don't
transmit beacons in AP mode. (Some?) SDIO devices are also affected.
The cause appears to be clearing BIT_EN_BCNQ_DL of REG_FWHW_TXQ_CTRL
before uploading the beacon reserved page, so don't clear the bit for
USB and SDIO devices.
Tested with RTL8811CU and RTL8723DU.
Cc: <stable@vger.kernel.org> # 6.6.x
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/49de73b5-698f-4865-ab63-100e28dfc4a1@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5551bc30e4a69ad86d0d008e2f56cd59b6583476 upstream.
SD cards can produce write latency spikes on the order of a hundred
milliseconds. If the target firmware does not hide that latency during DATA
IN and OUT phases it can cause the PDMA circuitry to raise a processor bus
fault which in turn leads to an unreliable byte count and a DMA overrun.
The Last Byte Sent flag is used to detect the overrun but this mechanism is
unreliable on some systems. Instead, set a DID_ERROR result whenever there
is a bus fault during a PDMA send, unless the cause was a phase mismatch.
Cc: stable@vger.kernel.org # 5.15+
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 7c1f3e3447 ("scsi: mac_scsi: Treat Last Byte Sent time-out as failure")
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/cc38df687ace2c4ffc375a683b2502fc476b600d.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e9a2990a93f27daa643b6fa73cfa47b128947a7 upstream.
When the user requests the ALL_SUB_MPAGES mode sense page,
ata_msense_control() adds the CDL_T2A_SUB_MPAGE twice instead of adding
the CDL_T2A_SUB_MPAGE and CDL_T2B_SUB_MPAGE pages information. Correct
the second call to ata_msense_control_spgt2() to report the
CDL_T2B_SUB_MPAGE page.
Fixes: 673b2fe6ff ("scsi: ata: libata-scsi: Add support for CDL pages mode sense")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5a709f08d40b1a082e44ffcde1aea4d2822ddd5 upstream.
Ray Zhang reported ksmbd can not create file if parent filename is
caseless.
Y:\>mkdir A
Y:\>echo 123 >a\b.txt
The system cannot find the path specified.
Y:\>echo 123 >A\b.txt
This patch convert name obtained by caseless lookup to parent name.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Ray Zhang <zhanglei002@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2fb9b5dc80cabcee636a6ccd020740dd925b4580 upstream.
Windows client write with FILE_APPEND_DATA when using git.
ksmbd should allow write it with this flags.
Z:\test>git commit -m "test"
fatal: cannot update the ref 'HEAD': unable to append to
'.git/logs/HEAD': Bad file descriptor
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca4974ca954561e79f8871d220bb08f14f64f57c upstream.
Some file systems may not provide dot (.) and dot-dot (..) as they are
optional in POSIX. ksmbd can misjudge emptiness of a directory in those
file systems, since it assumes there are always at least two entries:
dot and dot-dot.
Just don't count dot and dot-dot.
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Hobin Woo <hobin.woo@samsung.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42c3732fa8073717dd7d924472f1c0bc5b452fdc upstream.
De-duplicate the same functionality in several places by hoisting
the is_dot_dotdot() utility function into linux/fs.h.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39190ac7cff1fd15135fa8e658030d9646fdb5f2 upstream.
The 'ld' and 'std' instructions require a 4-byte aligned displacement
because they are DS-form instructions. But the "m" asm constraint
doesn't enforce that.
That can lead to build errors if the compiler chooses a non-aligned
displacement, as seen with GCC 14:
/tmp/ccuSzwiR.s: Assembler messages:
/tmp/ccuSzwiR.s:2579: Error: operand out of domain (39 is not a multiple of 4)
make[5]: *** [scripts/Makefile.build:229: net/core/page_pool.o] Error 1
Dumping the generated assembler shows:
ld 8,39(8) # MEM[(const struct atomic64_t *)_29].counter, t
Use the YZ constraints to tell the compiler either to generate a DS-form
displacement, or use an X-form instruction, either of which prevents the
build error.
See commit 2d43cc701b96 ("powerpc/uaccess: Fix build errors seen with
GCC 13/14") for more details on the constraint letters.
Fixes: 9f0cbea0d8 ("[POWERPC] Implement atomic{, 64}_{read, write}() without volatile")
Cc: stable@vger.kernel.org # v2.6.24+
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240913125302.0a06b4c7@canb.auug.org.au
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240916120510.2017749-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70fd1966c93bf3bfe3fe6d753eb3d83a76597eef upstream.
In find_asymmetric_key(), if all NULLs are passed in the id_{0,1,2}
arguments, the kernel will first emit WARN but then have an oops
because id_2 gets dereferenced anyway.
Add the missing id_2 check and move WARN_ON() to the final else branch
to avoid duplicate NULL checks.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Cc: stable@vger.kernel.org # v5.17+
Fixes: 7d30198ee2 ("keys: X.509 public key issuer lookup without AKID")
Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 327e62f47eb57ae5ff63de82b0815557104e439a upstream.
Currently amdgpu takes backlight caps provided by the ACPI tables
on systems as is. If the firmware sets maximums that are too low
this means that users don't get a good experience.
To avoid having to maintain a quirk list of such systems, do a sanity
check on the values. Check that the spread is at least half of the
values that amdgpu would use if no ACPI table was found and if not
use the amdgpu defaults.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3020
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44d17459626052a2390457e550a12cb973506b2f upstream.
Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock
on x86 due to a chain of locks and SRCU synchronizations. Translating the
below lockdep splat, CPU1 #6 will wait on CPU0 #1, CPU0 #8 will wait on
CPU2 #3, and CPU2 #7 will wait on CPU1 #4 (if there's a writer, due to the
fairness of r/w semaphores).
CPU0 CPU1 CPU2
1 lock(&kvm->slots_lock);
2 lock(&vcpu->mutex);
3 lock(&kvm->srcu);
4 lock(cpu_hotplug_lock);
5 lock(kvm_lock);
6 lock(&kvm->slots_lock);
7 lock(cpu_hotplug_lock);
8 sync(&kvm->srcu);
Note, there are likely more potential deadlocks in KVM x86, e.g. the same
pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with
__kvmclock_cpufreq_notifier():
cpuhp_cpufreq_online()
|
-> cpufreq_online()
|
-> cpufreq_gov_performance_limits()
|
-> __cpufreq_driver_target()
|
-> __target_index()
|
-> cpufreq_freq_transition_begin()
|
-> cpufreq_notify_transition()
|
-> ... __kvmclock_cpufreq_notifier()
But, actually triggering such deadlocks is beyond rare due to the
combination of dependencies and timings involved. E.g. the cpufreq
notifier is only used on older CPUs without a constant TSC, mucking with
the NX hugepage mitigation while VMs are running is very uncommon, and
doing so while also onlining/offlining a CPU (necessary to generate
contention on cpu_hotplug_lock) would be even more unusual.
The most robust solution to the general cpu_hotplug_lock issue is likely
to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq
notifier doesn't to take kvm_lock. For now, settle for fixing the most
blatant deadlock, as switching to an RCU-protected list is a much more
involved change, but add a comment in locking.rst to call out that care
needs to be taken when walking holding kvm_lock and walking vm_list.
======================================================
WARNING: possible circular locking dependency detected
6.10.0-smp--c257535a0c9d-pip #330 Tainted: G S O
------------------------------------------------------
tee/35048 is trying to acquire lock:
ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm]
but task is already holding lock:
ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (kvm_lock){+.+.}-{3:3}:
__mutex_lock+0x6a/0xb40
mutex_lock_nested+0x1f/0x30
kvm_dev_ioctl+0x4fb/0xe50 [kvm]
__se_sys_ioctl+0x7b/0xd0
__x64_sys_ioctl+0x21/0x30
x64_sys_call+0x15d0/0x2e60
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #2 (cpu_hotplug_lock){++++}-{0:0}:
cpus_read_lock+0x2e/0xb0
static_key_slow_inc+0x16/0x30
kvm_lapic_set_base+0x6a/0x1c0 [kvm]
kvm_set_apic_base+0x8f/0xe0 [kvm]
kvm_set_msr_common+0x9ae/0xf80 [kvm]
vmx_set_msr+0xa54/0xbe0 [kvm_intel]
__kvm_set_msr+0xb6/0x1a0 [kvm]
kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm]
kvm_vcpu_ioctl+0x485/0x5b0 [kvm]
__se_sys_ioctl+0x7b/0xd0
__x64_sys_ioctl+0x21/0x30
x64_sys_call+0x15d0/0x2e60
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&kvm->srcu){.+.+}-{0:0}:
__synchronize_srcu+0x44/0x1a0
synchronize_srcu_expedited+0x21/0x30
kvm_swap_active_memslots+0x110/0x1c0 [kvm]
kvm_set_memslot+0x360/0x620 [kvm]
__kvm_set_memory_region+0x27b/0x300 [kvm]
kvm_vm_ioctl_set_memory_region+0x43/0x60 [kvm]
kvm_vm_ioctl+0x295/0x650 [kvm]
__se_sys_ioctl+0x7b/0xd0
__x64_sys_ioctl+0x21/0x30
x64_sys_call+0x15d0/0x2e60
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (&kvm->slots_lock){+.+.}-{3:3}:
__lock_acquire+0x15ef/0x2e30
lock_acquire+0xe0/0x260
__mutex_lock+0x6a/0xb40
mutex_lock_nested+0x1f/0x30
set_nx_huge_pages+0x179/0x1e0 [kvm]
param_attr_store+0x93/0x100
module_attr_store+0x22/0x40
sysfs_kf_write+0x81/0xb0
kernfs_fop_write_iter+0x133/0x1d0
vfs_write+0x28d/0x380
ksys_write+0x70/0xe0
__x64_sys_write+0x1f/0x30
x64_sys_call+0x281b/0x2e60
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Cc: Chao Gao <chao.gao@intel.com>
Fixes: 0bf50497f0 ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock")
Cc: stable@vger.kernel.org
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240830043600.127750-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71bf395a276f0578d19e0ae137a7d1d816d08e0e upstream.
Inject a #GP on a WRMSR(ICR) that attempts to set any reserved bits that
are must-be-zero on both Intel and AMD, i.e. any reserved bits other than
the BUSY bit, which Intel ignores and basically says is undefined.
KVM's xapic_state_test selftest has been fudging the bug since commit
4b88b1a518 ("KVM: selftests: Enhance handling WRMSR ICR register in
x2APIC mode"), which essentially removed the testcase instead of fixing
the bug.
WARN if the nodecode path triggers a #GP, as the CPU is supposed to check
reserved bits for ICR when it's partially virtualized.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240719235107.3023592-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f26a525b77e040d584e967369af1e018d2d59112 upstream.
When we share memory through FF-A and the description of the buffers
exceeds the size of the mapped buffer, the fragmentation API is used.
The fragmentation API allows specifying chunks of descriptors in subsequent
FF-A fragment calls and no upper limit has been established for this.
The entire memory region transferred is identified by a handle which can be
used to reclaim the transferred memory.
To be able to reclaim the memory, the description of the buffers has to fit
in the ffa_desc_buf.
Add a bounds check on the FF-A sharing path to prevent the memory reclaim
from failing.
Also do_ffa_mem_xfer() does not need __always_inline, except for the
BUILD_BUG_ON() aspect, which gets moved to a macro.
[maz: fixed the BUILD_BUG_ON() breakage with LLVM, thanks to Wei-Lin Chang
for the timely report]
Fixes: 634d90cf0a ("KVM: arm64: Handle FFA_MEM_LEND calls from the host")
Cc: stable@vger.kernel.org
Reviewed-by: Sebastian Ene <sebastianene@google.com>
Signed-off-by: Snehal Koukuntla <snehalreddy@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240909180154.3267939-1-snehalreddy@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3870e2850b56306d1d1e435c5a1ccbccd7c59291 upstream.
The Gen6 devices have the same problem and the same Solution as the Gen5
ones.
Some TongFang barebones have touchpad and/or keyboard issues after
suspend, fixable with nomux + reset + noloop + nopnp. Luckily, none of
them have an external PS/2 port so this can safely be set for all of
them.
I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use, no negative effects could be
observed when setting all four.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240910094008.1601230-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e06edf96dea065dd1d9df695bf8b92784992333e upstream.
Some TongFang barebones have touchpad and/or keyboard issues after
suspend, fixable with nomux + reset + noloop + nopnp. Luckily, none of
them have an external PS/2 port so this can safely be set for all of
them.
I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use, no negative effects could be
observed when setting all four.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240905164851.771578-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0199d2f2bd8cd97b310f7ed82a067247d7456029 upstream.
MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit 2,
and INTD in bit 3. Hardware IRQ numbers start at 0, and we register
PCI_NUM_INTX IRQs. So to enable INTA (aka hwirq 0) we should set bit 0.
Remove the subtraction of one.
This bug would cause INTx interrupts not to be delivered, as enabling INTB
would actually enable INTA, and enabling INTA wouldn't enable anything at
all. It is likely that this got overlooked for so long since most PCIe
hardware uses MSIs. This fixes the following UBSAN error:
UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11
shift exponent 18446744073709551615 is too large for 32-bit type 'int'
CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ #268
Hardware name: xlnx,zynqmp (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace (arch/arm64/kernel/stacktrace.c:235)
show_stack (arch/arm64/kernel/stacktrace.c:242)
dump_stack_lvl (lib/dump_stack.c:107)
dump_stack (lib/dump_stack.c:114)
__ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387)
nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1))
irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345)
__irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250)
irq_startup (kernel/irq/chip.c:270)
__setup_irq (kernel/irq/manage.c:1800)
request_threaded_irq (kernel/irq/manage.c:2206)
pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348)
Fixes: 9a181e1093 ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts")
Link: https://lore.kernel.org/r/20240531161337.864994-3-sean.anderson@linux.dev
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8037ac08c2bbb3186f83a5a924f52d1048dbaec5 upstream.
The LBMS bit, where implemented, is set by hardware either in response
to the completion of retraining caused by writing 1 to the Retrain Link
bit or whenever hardware has changed the link speed or width in attempt
to correct unreliable link operation. It is never cleared by hardware
other than by software writing 1 to the bit position in the Link Status
register and we never do such a write.
We currently have two places, namely apply_bad_link_workaround() and
pcie_failed_link_retrain() in drivers/pci/controller/dwc/pcie-tegra194.c
and drivers/pci/quirks.c respectively where we check the state of the LBMS
bit and neither is interested in the state of the bit resulting from the
completion of retraining, both check for a link fault.
And in particular pcie_failed_link_retrain() causes issues consequently, by
trying to retrain a link where there's no downstream device anymore and the
state of 1 in the LBMS bit has been retained from when there was a device
downstream that has since been removed.
Clear the LBMS bit then at the conclusion of pcie_retrain_link(), so that
we have a single place that controls it and that our code can track link
speed or width changes resulting from unreliable link operation.
Fixes: a89c82249c ("PCI: Work around PCIe link training failures")
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2408091133140.61955@angie.orcam.me.uk
Reported-by: Matthew W Carlis <mattc@purestorage.com>
Link: https://lore.kernel.org/r/20240806000659.30859-1-mattc@purestorage.com/
Link: https://lore.kernel.org/r/20240722193407.23255-1-mattc@purestorage.com/
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76be4f5a784533c71afbbb1b8f2963ef9e2ee258 upstream.
Commit 3f1b0e1f28 (".gitignore update") added *.orig and *.rej
patterns to .gitignore in v2.6.23. The commit message didn't give a
rationale. Later on, commit 1f5d3a6b65 ("Remove *.rej pattern from
.gitignore") removed the *.rej pattern in v2.6.26, on the rationale that
*.rej files indicated something went really wrong and should not be
ignored.
The *.rej files are now shown by `git status`, which helps located
conflicts when applying patches and lowers the probability that they
will go unnoticed. It is however still easy to overlook the *.orig files
which slowly polute the source tree. That's not as big of a deal as not
noticing a conflict, but it's still not nice.
Drop the *.orig pattern from .gitignore to avoid this and help keep the
source tree clean.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[masahiroy@kernel.org:
I do not have a strong opinion about this. Perhaps some people may have
a different opinion.
If you are someone who wants to ignore *.orig, it is likely you would
want to do so across all projects. Then, $XDG_CONFIG_HOME/git/ignore
would be more suitable for your needs. gitignore(5) suggests, "Patterns
which a user wants Git to ignore in all situations generally go into a
file specified by core.excludesFile in the user's ~/.gitconfig".
Please note that you cannot do the opposite; if *.orig is ignored by
the project's .gitignore, you cannot override the decision because
$XDG_CONFIG_HOME/git/ignore has a lower priority.
If *.orig is sitting on the fence, I'd leave it to the users. ]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a09c17240bdf2e9fa6d0591afa9448b59785f7d4 upstream.
A recent commit ensured that SQPOLL cannot be setup with a CPU that
isn't in the current tasks cpuset, but it also dropped testing whether
the CPU is valid in the first place. Without that, if a task passes in
a CPU value that is too high, the following KASAN splat can get
triggered:
BUG: KASAN: stack-out-of-bounds in io_sq_offload_create+0x858/0xaa4
Read of size 8 at addr ffff800089bc7b90 by task wq-aff.t/1391
CPU: 4 UID: 1000 PID: 1391 Comm: wq-aff.t Not tainted 6.11.0-rc7-00227-g371c468f4db6 #7080
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace.part.0+0xcc/0xe0
show_stack+0x14/0x1c
dump_stack_lvl+0x58/0x74
print_report+0x16c/0x4c8
kasan_report+0x9c/0xe4
__asan_report_load8_noabort+0x1c/0x24
io_sq_offload_create+0x858/0xaa4
io_uring_setup+0x1394/0x17c4
__arm64_sys_io_uring_setup+0x6c/0x180
invoke_syscall+0x6c/0x260
el0_svc_common.constprop.0+0x158/0x224
do_el0_svc+0x3c/0x5c
el0_svc+0x34/0x70
el0t_64_sync_handler+0x118/0x124
el0t_64_sync+0x168/0x16c
The buggy address belongs to stack of task wq-aff.t/1391
and is located at offset 48 in frame:
io_sq_offload_create+0x0/0xaa4
This frame has 1 object:
[32, 40) 'allowed_mask'
The buggy address belongs to the virtual mapping at
[ffff800089bc0000, ffff800089bc9000) created by:
kernel_clone+0x124/0x7e0
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff0000d740af80 pfn:0x11740a
memcg:ffff0000c2706f02
flags: 0xbffe00000000000(node=0|zone=2|lastcpupid=0x1fff)
raw: 0bffe00000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff0000d740af80 0000000000000000 00000001ffffffff ffff0000c2706f02
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff800089bc7a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff800089bc7b00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
>ffff800089bc7b80: 00 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
^
ffff800089bc7c00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
ffff800089bc7c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f3
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202409161632.cbeeca0d-lkp@intel.com
Fixes: f011c9cf04c0 ("io_uring/sqpoll: do not allow pinning outside of cpuset")
Tested-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9221222c717dbddac1e3c49906525475d87a3a44 upstream.
When running as a Xen PV dom0 the system needs to map ACPI data of the
host using host physical addresses, while those addresses can conflict
with the guest physical addresses of the loaded linux kernel. The same
problem might apply in case a PV guest is configured to use the host
memory map.
This conflict can be solved by mapping the ACPI data to a different
guest physical address, but mapping the data via acpi_os_ioremap()
must still be possible using the host physical address, as this
address might be generated by AML when referencing some of the ACPI
data.
When configured to support running as a Xen PV domain, have an
implementation of acpi_os_ioremap() being aware of the possibility to
need above mentioned translation of a host physical address to the
guest physical address.
This modification requires to #include linux/acpi.h in some sources
which need to include asm/acpi.h directly.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4498ae316da5b5786ccd448fc555f3339b8e4ca upstream.
Move the checks for e820 memory map conflicts using the
xen_chk_is_e820_usable() helper further up in order to prepare
resolving some of the possible conflicts by doing some e820 map
modifications, which must happen before evaluating the RAM layout.
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 69197dfc64007b5292cc960581548f41ccd44828.
commit 937d46ecc5f9 ("net: wangxun: add ethtool_ops for
channel number") changed NIC misc irq from most significant
bit to least significant bit, the former condition is not
required to apply this patch, because we only need to set
irq affinity for NIC queue irq vectors.
this patch is required after commit 937d46ecc5f9 ("net: wangxun:
add ethtool_ops for channel number") was applied, so this is only
relevant to 6.6.y branch.
Signed-off-by: Duanqiang Wen <duanqiangwen@net-swift.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
