[ Upstream commit 1d99f92f71b6b4b2eee776562c991428490f71ef ]
The BRCMSTB and BRCMSTB_RESCAL reset drivers are also
used in the BCM2712, AKA the RPi5. The RPi platforms
have typically used the ARCH_BCM2835, and the PCIe
support for this SoC can use this config which depends
on these drivers so enable building them when just that
arch option is enabled to ensure the platform works as
expected.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250630175301.846082-1-pbrobinson@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bca1e955830808dc90e0506b2951b4256b81bbb ]
The interrupt handler in pps_gpio_probe() is registered after calling
pps_register_source() using devm_request_irq(). However, in the
corresponding remove function, pps_unregister_source() is called before
the IRQ is freed, since devm-managed resources are released after the
remove function completes.
This creates a potential race condition where an interrupt may occur
after the PPS source is unregistered but before the handler is removed,
possibly leading to a kernel panic.
To prevent this, switch from devm-managed IRQ registration to manual
management by using request_irq() and calling free_irq() explicitly in
the remove path before unregistering the PPS source. This ensures the
interrupt handler is safely removed before deactivating the PPS source.
Signed-off-by: Eliav Farber <farbere@amazon.com>
Link: https://lore.kernel.org/r/20250527053355.37185-1-farbere@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4734c8b46b901cff2feda8b82abc710b65dc31c1 ]
When a GHES (Generic Hardware Error Source) triggers a panic, add the
TAINT_MACHINE_CHECK taint flag to the kernel. This explicitly marks the
kernel as tainted due to a machine check event, improving diagnostics
and post-mortem analysis. The taint is set with LOCKDEP_STILL_OK to
indicate lockdep remains valid.
At large scale deployment, this helps to quickly determine panics that
are coming due to hardware failures.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20250702-add_tain-v1-1-9187b10914b9@debian.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db58532188ebf51d52b1d7693d9e94c76b926e9f ]
Many mobile phones feature multi-card tray designs, where the same
tray is used for both SD and SIM cards. If the SD card is placed
at the outermost location in the tray, the SIM card may come in
contact with SD card power-supply while removing the tray, possibly
resulting in SIM damage.
To prevent that, make sure the SD card is really inserted by reading
the Card Detect pin state. If it's not, turn off the power in
sdhci_msm_check_power_status() and also set the BUS_FAIL power state
on the controller as part of pwr_irq handling for BUS_ON request.
Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250701100659.3310386-1-quic_sartgarg@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13edf7539211d8f7d0068ce3ed143005f1da3547 ]
Initialization of the local acpi_object in acpi_processor_get_info()
only sets the first 4 bytes to zero and is thus incomplete. This is
indicated by messages like:
acpi ACPI0007:be: Invalid PBLK length [166288104]
Fix this by initializing all 16 bytes of the processor member of that
union.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://patch.msgid.link/20250703124215.12522-1-sebott@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4266e8fa56d3d982bf451d382a410b9db432015c ]
When the computer enters sleep status without a monitor
connected, the system switches the console to the virtual
terminal tty63(SUSPEND_CONSOLE).
If a monitor is subsequently connected before waking up,
the system skips the required VT restoration process
during wake-up, leaving the console on tty63 instead of
switching back to tty1.
To fix this issue, a global flag vt_switch_done is introduced
to record whether the system has successfully switched to
the suspend console via vt_move_to_console() during suspend.
If the switch was completed, vt_switch_done is set to 1.
Later during resume, this flag is checked to ensure that
the original console is restored properly by calling
vt_move_to_console(orig_fgconsole, 0).
This prevents scenarios where the resume logic skips console
restoration due to incorrect detection of the console state,
especially when a monitor is reconnected before waking up.
Signed-off-by: tuhaowen <tuhaowen@uniontech.com>
Link: https://patch.msgid.link/20250611032345.29962-1-tuhaowen@uniontech.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a4aabc27e95674837f2e25f4ef340c0469e6203 ]
According to POSIX spec, EAGAIN returned by read with O_NONBLOCK set
means the read would block. Hence, the common implementation in
nonblocking model will poll the file when the nonblocking read returns
EAGAIN. However, when the target file is thermal zone, this mechanism
will totally malfunction because thermal zone doesn't implement sysfs
notification and thus the poll will never return.
For example, the read in Golang implemnts such method and sometimes
hangs at reading some thermal zones via sysfs.
Change to return -ENODATA instead of -EAGAIN to userspace.
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Link: https://patch.msgid.link/20250620-temp-v3-1-6becc6aeb66c@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78eb18020a88a4eed15f5af7700ed570642ff8f1 ]
The IVC code is library code that other drivers need to select if they
need that library. However, if the symbol is user-selectable this can
lead to conflicts.
Fix this by making the symbol only selectable for COMPILE_TEST and add
a select TEGRA_IVC to TEGRA_BPMP, which is currently the only user.
Link: https://lore.kernel.org/r/20250506133118.1011777-10-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3db5648c4d608b5483470efc1da9780b081242dd ]
Commit 088984c8d54c ("ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM
handler and context") introduced non-essential printing "Failed to find
VA for GUID: xxxx, PA: 0x0" which may confuse users to think that
something wrong is going on while it is not the case.
According to the PRM Spec Section 4.1.2 [1], both static data buffer
address and ACPI parameter buffer address may be NULL if they are not
needed, so there is no need to print out the "Failed to find VA ... "
in those cases.
Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1]
Signed-off-by: Zhu Qiyu <qiyuzhu2@amd.com>
Link: https://patch.msgid.link/20250704014104.82524-1-qiyuzhu2@amd.com
[ rjw: Edits in new comments, subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5094bcb5bfdfea2cf0de8aaf77cc65db56cbdb5 ]
Nolibc assumes that the kernel ABI is using a time values that are as
large as a long integer. For most ABIs this holds true.
But for x32 this is not correct, as it uses 32bit longs but 64bit times.
Also the 'struct stat' implementation of nolibc relies on timespec::tv_sec
and time_t being the same type. While timespec::tv_sec comes from the
kernel and is of type __kernel_old_time_t, time_t is defined within nolibc.
Switch to the __kernel_old_time_t to always get the correct type.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250712-nolibc-x32-v1-1-6d81cb798710@weissschuh.net
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8e157ff2df46ddabd930815d196895976227831 ]
Certain TEMP_ALARM GEN2 PMIC peripherals need over-temperature stage 2
automatic PMIC partial shutdown. This will ensure that in the event of
reaching the hotter stage 3 over-temperature threshold, repeated faults
will be avoided during the automatic PMIC hardware full shutdown.
Modify the stage 2 shutdown control logic to ensure that stage 2
shutdown is enabled on all affected PMICs. Read the digital major
and minor revision registers to identify these PMICs.
Signed-off-by: David Collins <david.collins@oss.qualcomm.com>
Signed-off-by: Anjelique Melendez <anjelique.melendez@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250710224555.3047790-2-anjelique.melendez@oss.qualcomm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f40ecc2743652c0b0f19935f81baf57c601eb7f0 ]
ASoC has 2 functions to set bias level.
(A) snd_soc_dapm_force_bias_level()
(B) snd_soc_dapm_set_bias_level()
snd_soc_dapm_force_bias_level() (A) will set dapm->bias_level (a) if
successed.
(A) int snd_soc_dapm_force_bias_level(...)
{
...
if (ret == 0)
(a) dapm->bias_level = level;
...
}
snd_soc_dapm_set_bias_level() (B) is also a function that sets bias_level.
It will call snd_soc_dapm_force_bias_level() (A) inside, but doesn't
set dapm->bias_level by itself. One note is that (A) might not be called.
(B) static int snd_soc_dapm_set_bias_level(...)
{
...
ret = snd_soc_card_set_bias_level(...);
...
if (dapm != &card->dapm)
(A) ret = snd_soc_dapm_force_bias_level(...);
...
ret = snd_soc_card_set_bias_level_post(...);
...
}
dapm->bias_level will be set if (A) was called, but might not be set
if (B) was called, even though it calles set_bias_level() function.
We should set dapm->bias_level if we calls
snd_soc_dapm_set_bias_level() (B), too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87qzyn4g4h.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cdb433bb44cdc87dc5260cdf15bf03cc1cd1814 ]
In order to bring up secondary CPUs main CPU write trampoline
code to SRAM. The trampoline code is written while secondary
CPUs are powered on (at least that true for RK3188 CPU).
Sometimes that leads to kernel hang. Probably because secondary
CPU execute trampoline code while kernel doesn't expect.
The patch moves SRAM initialization step to the point where all
secondary CPUs are powered down.
That fixes rarely hangs on RK3188:
[ 0.091568] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.091996] rockchip_smp_prepare_cpus: ncores 4
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Link: https://lore.kernel.org/r/20250703140453.1273027-1-al.kochet@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 496deecb020d14ba89ba7084fbc3024f91687023 ]
For the i.MX8X and i.MX8 family SoCs, when the Cortex-M core is powered
up and started by the Cortex-A core using the bootloader (e.g., via the
U-Boot bootaux command), both M-core and Linux run within the same SCFW
(System Controller Firmware) partition. With that, Linux has permission
to control the M-core.
But once the M-core is started by the bootloader, the SCFW automatically
enables its clock and sets the clock rate. If Linux later attempts to
enable the same clock via clk_prepare_enable(), the SCFW returns a
'LOCKED' error, as the clock is already configured by the SCFW. This
causes the probe function in imx_rproc.c to fail, leading to the M-core
power domain being shut down while the core is still running. This
results in a fault from the SCU (System Controller Unit) and triggers a
system reset.
To address this issue, ignore handling the clk for i.MX8X and i.MX8
M-core, as SCFW already takes care of enabling and configuring the
clock.
Suggested-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20250629172512.14857-3-hiagofranco@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79a5ae3c4c5eb7e38e0ebe4d6bf602d296080060 ]
If a synchronous error is detected as a result of user-space process
triggering a 2-bit uncorrected error, the CPU will take a synchronous
error exception such as Synchronous External Abort (SEA) on Arm64. The
kernel will queue a memory_failure() work which poisons the related
page, unmaps the page, and then sends a SIGBUS to the process, so that
a system wide panic can be avoided.
However, no memory_failure() work will be queued when abnormal
synchronous errors occur. These errors can include situations like
invalid PA, unexpected severity, no memory failure config support,
invalid GUID section, etc. In such a case, the user-space process will
trigger SEA again. This loop can potentially exceed the platform
firmware threshold or even trigger a kernel hard lockup, leading to a
system reboot.
Fix it by performing a force kill if no memory_failure() work is queued
for synchronous errors.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://patch.msgid.link/20250714114212.31660-2-xueshuai@linux.alibaba.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f72b9aa821a2bfe4b6dfec4be19f264d0673b008 ]
There is a subtle contradiction between sections of the xHCI 1.2 spec
regarding the initialization of Input Endpoint Context fields. Section
4.8.2 ("Endpoint Context Initialization") states that all fields should
be initialized to 0. However, Section 6.2.3 ("Endpoint Context", p.453)
specifies that the Average TRB Length (avg_trb_len) field shall be
greater than 0, and explicitly notes (p.454): "Software shall set
Average TRB Length to '8' for control endpoints."
Strictly setting all fields to 0 during initialization conflicts with
the specific recommendation for control endpoints. In practice, setting
avg_trb_len = 0 is not meaningful for the hardware/firmware, as the
value is used for bandwidth calculation.
Motivation: Our company is developing a custom Virtual xHC hardware
platform that strictly follows the xHCI spec and its recommendations.
During validation, we observed that enumeration fails and a parameter
error (TRB Completion Code = 5) is reported if avg_trb_len for EP0 is
not set to 8 as recommended by Section 6.2.3. This demonstrates the
importance of assigning a meaningful, non-zero value to avg_trb_len,
even in virtualized or emulated environments.
This patch explicitly sets avg_trb_len to 8 for EP0 in
xhci_setup_addressable_virt_dev(), as recommended in Section 6.2.3, to
prevent potential issues with xHCI host controllers that enforce the
spec strictly.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220033
Signed-off-by: Jay Chen <shawn2000100@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250717073107.488599-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af833e7f7db3cf4c82f063668e1b52297a30ec18 ]
ucsi_psy_get_current_max would return 0mA as the maximum current if
UCSI detected a BC or a Default USB Power sporce.
The comment in this function is true that we can't tell the difference
between DCP/CDP or SDP chargers, but we can guarantee that at least 1-unit
of USB 1.1/2.0 power is available, which is 100mA, which is a better
fallback value than 0, which causes some userspaces, including the ChromeOS
power manager, to regard this as a power source that is not providing
any power.
In reality, 100mA is guaranteed from all sources in these classes.
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Jameson Thies <jthies@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250717200805.3710473-1-bleung@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04850819c65c8242072818655d4341e70ae998b5 ]
The kernel does not provide sys_futex() on 32-bit architectures that do not
support 32-bit time representations, such as riscv32.
As a result, glibc cannot define SYS_futex, causing compilation failures in
tests that rely on this syscall. Define SYS_futex as SYS_futex_time64 in
such cases to ensure successful compilation and compatibility.
Signed-off-by: Cynthia Huang <cynthia@andestech.com>
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/all/20250710103630.3156130-1-ben717@andestech.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a1416a49e63c320f6e6c1c8d07e1b58c0d4a3f3 ]
AMU counters on certain CPPC-based platforms tend to yield inaccurate
delivered performance measurements on systems that are idle/mostly idle.
This results in an inaccurate frequency being stored by cpufreq in its
policy structure when the CPU is brought online. [1]
Consequently, if the userspace governor tries to set the frequency to a
new value, there is a possibility that it would be the erroneous value
stored earlier. In such a scenario, cpufreq would assume that the
requested frequency has already been set and return early, resulting in
the correct/new frequency request never making it to the hardware.
Since the operating frequency is liable to this sort of inconsistency,
mark the CPPC driver with CPUFREQ_NEED_UPDATE_LIMITS so that it is always
invoked when a target frequency update is requested.
Link: https://lore.kernel.org/linux-pm/20250619000925.415528-3-pmalani@google.com/ [1]
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Prashant Malani <pmalani@google.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250722055611.130574-2-pmalani@google.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7919407eca2ef562fa6c98c41cfdf6f6cdd69d92 ]
When encounters some errors like these:
xhci_hcd 0000:4a:00.2: xHCI dying or halted, can't queue_command
xhci_hcd 0000:4a:00.2: FIXME: allocate a command ring segment
usb usb5-port6: couldn't allocate usb_device
It's hard to know whether xhc_state is dying or halted. So it's better
to print xhc_state's value which can help locate the resaon of the bug.
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20250725060117.1773770-1-suhui@nfschina.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9b13cdad80dc11d74408cf201939a946e9303a6 ]
If a lookup in tracefs is done on a file that does not exist, it leaves a
dentry hanging around until memory pressure removes it. But eventfs
dentries should hang around as when their ref count goes to zero, it
requires more work to recreate it. For the rest of the tracefs dentries,
they hang around as their dentry is used as a descriptor for the tracing
system. But if a file lookup happens for a file in tracefs that does not
exist, it should be deleted.
Add a .d_delete callback that checks if dentry->fsdata is set or not. Only
eventfs dentries set fsdata so if it has content it should not be deleted
and should hang around in the cache.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27cd1bf1240d482e4f02ca4f9812e748f3106e4f ]
incidentally, securityfs_recursive_remove() is broken without that -
it leaks dentries, since simple_recursive_removal() does not expect
anything of that sort. It could be worked around by dput() in
remove_one() callback, but it's easier to just drop that double-get
stuff.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c58d42de71f9c73e40afacc9d062892d2cc8862 ]
We used to need securityfs_remove() to undo simple_pin_fs() done when
the file had been created and to drop the second extra reference
taken at the same time. Now that neither is needed (or done by
securityfs_remove()), we can simply call simple_unlink() and be done
with that - the broken games with locking had been there only for the
sake of securityfs_remove().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a8061ee5e41034eb14170ec4517b5583dbeff9f ]
We want a class that nests outside of I_MUTEX_NORMAL (for the sake of
callbacks that might want to lock the victim) and inside I_MUTEX_PARENT
(so that a variant of that could be used with parent of the victim
held locked by the caller).
In reality, simple_recursive_removal()
* never holds two locks at once
* holds the lock on parent of dentry passed to callback
* is used only on the trees with fixed topology, so the depths
are not changing.
So the locking order is actually fine.
AFAICS, the best solution is to assign I_MUTEX_CHILD to the locks
grabbed by that thing.
Reported-by: syzbot+169de184e9defe7fe709@syzkaller.appspotmail.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00c9c9628b49e368d140cfa61d7df9b8922ec2a8 ]
With `two-primaries` enabled, DRBD tries to detect "concurrent" writes
and handle write conflicts, so that even if you write to the same sector
simultaneously on both nodes, they end up with the identical data once
the writes are completed.
In handling "superseeded" writes, we forgot a kref_get,
resulting in a premature drbd_destroy_device and use after free,
and further to kernel crashes with symptoms.
Relevance: No one should use DRBD as a random data generator, and apparently
all users of "two-primaries" handle concurrent writes correctly on layer up.
That is cluster file systems use some distributed lock manager,
and live migration in virtualization environments stops writes on one node
before starting writes on the other node.
Which means that other than for "test cases",
this code path is never taken in real life.
FYI, in DRBD 9, things are handled differently nowadays. We still detect
"write conflicts", but no longer try to be smart about them.
We decided to disconnect hard instead: upper layers must not submit concurrent
writes. If they do, that's their fault.
Signed-off-by: Sarah Newman <srn@prgmr.com>
Signed-off-by: Lars Ellenberg <lars@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20250627095728.800688-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a11201668e8635602577dcf06f2e96c591d8819 ]
Verify that number of partition maps isn't insanely high which can lead
to large allocation in udf_sb_alloc_partition_maps(). All partition maps
have to fit in the LVD which is in a single block.
Reported-by: syzbot+478f2c1a6f0f447a46bb@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e49538288e523427beedd26993d446afef1a6fb ]
Syzbot came up with a reproducer where a loop device block size is
changed underneath a mounted filesystem. This causes a mismatch between
the block device block size and the block size stored in the superblock
causing confusion in various places such as fs/buffer.c. The particular
issue triggered by syzbot was a warning in __getblk_slow() due to
requested buffer size not matching block device block size.
Fix the problem by getting exclusive hold of the loop device to change
its block size. This fails if somebody (such as filesystem) has already
an exclusive ownership of the block device and thus prevents modifying
the loop device under some exclusive owner which doesn't expect it.
Reported-by: syzbot+01ef7a8da81a975e1ccd@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: syzbot+01ef7a8da81a975e1ccd@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20250711163202.19623-2-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c8f12cf1e64e0e8e6cb80b0c935389973e8be8d ]
Clears up the warning added in 7ee3647243e5 ("migrate: Remove call to
->writepage") that occurs in various xfstests, causing "something found
in dmesg" failures.
[ 341.136573] gfs2_meta_aops does not implement migrate_folio
[ 341.136953] WARNING: CPU: 1 PID: 36 at mm/migrate.c:944 move_to_new_folio+0x2f8/0x300
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b2c214a95942f7997d1916a4c44017becbc3cac ]
NVMe devices from multiple vendors appear to get stuck in a reset state
that we can't get out of with an NVMe level Controller Reset. The kernel
would report these with messages that look like:
Device not ready; aborting reset, CSTS=0x1
These have historically required a power cycle to make them usable
again, but in many cases, a PCIe FLR is sufficient to restart operation
without a power cycle. Try it if the initial controller reset fails
during any nvme reset attempt.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5fc1400a34b4ea5e8f2ce296ea12bf8c8421694 ]
If smb2_create_link() is called with ReplaceIfExists set and the name
does exist then a deadlock will happen.
ksmbd_vfs_kern_path_locked() will return with success and the parent
directory will be locked. ksmbd_vfs_remove_file() will then remove the
file. ksmbd_vfs_link() will then be called while the parent is still
locked. It will try to lock the same parent and will deadlock.
This patch moves the ksmbd_vfs_kern_path_unlock() call to *before*
ksmbd_vfs_link() and then simplifies the code, removing the file_present
flag variable.
Signed-off-by: NeilBrown <neil@brown.name>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
