[ Upstream commit ee9b352ce4650ffc0d8ca0ac373d7c009c7e561e ]
Function msg_verify_data should have context of bytes_cnt and k instead of
assuming they are zero. Otherwise, test_sockmap with data integrity test
will report some errors. I also fix the logic related to size and index j
1/ 6 sockmap::txmsg test passthrough:FAIL
2/ 6 sockmap::txmsg test redirect:FAIL
7/12 sockmap::txmsg test apply:FAIL
10/11 sockmap::txmsg test push_data:FAIL
11/17 sockmap::txmsg test pull-data:FAIL
12/ 9 sockmap::txmsg test pop-data:FAIL
13/ 1 sockmap::txmsg test push/pop data:FAIL
...
Pass: 24 Fail: 52
After applying this patch, some of the errors are solved, but for push,
pull and pop, we may need more fixes to msg_verify_data, added a TODO
10/11 sockmap::txmsg test push_data:FAIL
11/17 sockmap::txmsg test pull-data:FAIL
12/ 9 sockmap::txmsg test pop-data:FAIL
...
Pass: 37 Fail: 15
Besides, added a custom errno EDATAINTEGRITY for msg_verify_data, we
shall not ignore the error in txmsg_cork case.
Fixes: 753fb2ee09 ("bpf: sockmap, add msg_peek tests to test_sockmap")
Fixes: 16edddfe3c ("selftests/bpf: test_sockmap, check test failure")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Link: https://lore.kernel.org/r/20241012203731.1248619-2-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d343723c7e1f9f6d64f721f07cfdfc2993758d1 ]
When a display controller driver uses DRM_BRIDGE_ATTACH_NO_CONNECTOR,
tc358767 will behave properly and skip the creation of the connector.
However, tc_get_display_props(), which is used to find out about the DP
monitor and link, is only called from two places: .atomic_enable() and
tc_connector_get_modes(). The latter is only used when tc358767 creates
its own connector, i.e. when DRM_BRIDGE_ATTACH_NO_CONNECTOR is _not_
set.
Thus, the driver never finds out the link properties before get_edid()
is called. With num_lanes of 0 and link_rate of 0 there are not many
valid modes...
Fix this by adding tc_get_display_props() call at the beginning of
get_edid(), so that we have up to date information before looking at the
modes.
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Closes: https://lore.kernel.org/all/24282420-b4dd-45b3-bb1c-fc37fe4a8205@siemens.com/
Fixes: de5e6c027a ("drm/bridge: tc358767: add drm_panel_bridge support")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108-tc358767-v2-2-25c5f70a2159@ideasonboard.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cf567f421dbfe7e53b7e5ddee9400da10efb75d ]
The current code only copies the address for the in path, leaving the out
path address set to 0. This patch corrects the issue by copying the addresses
for both the in and out paths. Before this patch:
# cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec
SA count=2 tx=20
sa[0] tx ipaddr=0.0.0.0
sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1
sa[0] key=0x3167608a ca4f1397 43565909 941fa627
sa[1] rx ipaddr=192.168.0.1
sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1
sa[1] key=0x3167608a ca4f1397 43565909 941fa627
After this patch:
= cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec
SA count=2 tx=20
sa[0] tx ipaddr=192.168.0.2
sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1
sa[0] key=0x3167608a ca4f1397 43565909 941fa627
sa[1] rx ipaddr=192.168.0.1
sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1
sa[1] key=0x3167608a ca4f1397 43565909 941fa627
Fixes: 7699353da8 ("netdevsim: add ipsec offload testing")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241010040027.21440-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db089c9158c1d535a36dfc010e5db37fccea2561 ]
Libbpf pre-1.0 had a legacy logic of allowing singular non-annotated
(i.e., not having explicit SEC() annotation) function to be treated as
sole entry BPF program (unless there were other explicit entry
programs).
This behavior was dropped during libbpf 1.0 transition period (unless
LIBBPF_STRICT_SEC_NAME flag was unset in libbpf_mode). When 1.0 was
released and all the legacy behavior was removed, the bug slipped
through leaving this legacy behavior around.
Fix this for good, as it actually causes very confusing behavior if BPF
object file only has subprograms, but no entry programs.
Fixes: bd054102a8 ("libbpf: enforce strict libbpf 1.0 behaviors")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241010211731.4121837-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4073213488be542f563eb4b2457ab4cbcfc2b738 ]
sym_is_subprog() is incorrectly rejecting relocations against *weak*
global subprogs. Fix that by realizing that STB_WEAK is also a global
function.
While it seems like verifier doesn't support taking an address of
non-static subprog right now, it's still best to fix support for it on
libbpf side, otherwise users will get a very confusing error during BPF
skeleton generation or static linking due to misinterpreted relocation:
libbpf: prog 'handle_tp': bad map relo against 'foo' in section '.text'
Error: failed to open BPF object file: Relocation failed
It's clearly not a map relocation, but is treated and reported as such
without this fix.
Fixes: 53eddb5e04 ("libbpf: Support subprog address relocation")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241009011554.880168-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc9b3fb827fceec4e05564d6e668280f4470ab5b ]
Including the network_helpers.h header in tests can lead to the following
build error:
./network_helpers.h: In function ‘csum_tcpudp_magic’:
./network_helpers.h:116:14: error: implicit declaration of function \
‘htons’ [-Werror=implicit-function-declaration]
116 | s += htons(proto + len);
The error is avoided in many cases thanks to some other headers included
earlier and bringing in arpa/inet.h (ie: test_progs.h).
Make sure that test_progs build success does not depend on header ordering
by adding the missing header include in network_helpers.h
Fixes: f6642de0c3e9 ("selftests/bpf: Add csum helpers")
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241008-network_helpers_fix-v1-1-2c2ae03df7ef@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bf1557e3d6a69113649d831276ea2f97585fc33 ]
test_progs uses glibc specific functions backtrace() and
backtrace_symbols_fd() to print backtrace in case of SIGSEGV.
Recent commit (see fixes) updated test_progs.c to define stub versions
of the same functions with attriubte "weak" in order to allow linking
test_progs against musl libc. Unfortunately this broke the backtrace
handling for glibc builds.
As it turns out, glibc defines backtrace() and backtrace_symbols_fd()
as weak:
$ llvm-readelf --symbols /lib64/libc.so.6 \
| grep -P '( backtrace_symbols_fd| backtrace)$'
4910: 0000000000126b40 161 FUNC WEAK DEFAULT 16 backtrace
6843: 0000000000126f90 852 FUNC WEAK DEFAULT 16 backtrace_symbols_fd
So does test_progs:
$ llvm-readelf --symbols test_progs \
| grep -P '( backtrace_symbols_fd| backtrace)$'
2891: 00000000006ad190 15 FUNC WEAK DEFAULT 13 backtrace
11215: 00000000006ad1a0 41 FUNC WEAK DEFAULT 13 backtrace_symbols_fd
In such situation dynamic linker is not obliged to favour glibc
implementation over the one defined in test_progs.
Compiling with the following simple modification to test_progs.c
demonstrates the issue:
$ git diff
...
\--- a/tools/testing/selftests/bpf/test_progs.c
\+++ b/tools/testing/selftests/bpf/test_progs.c
\@@ -1817,6 +1817,7 @@ int main(int argc, char **argv)
if (err)
return err;
+ *(int *)0xdeadbeef = 42;
err = cd_flavor_subdir(argv[0]);
if (err)
return err;
$ ./test_progs
[0]: Caught signal #11!
Stack trace:
<backtrace not supported>
Segmentation fault (core dumped)
Resolve this by hiding stub definitions behind __GLIBC__ macro check
instead of using "weak" attribute.
Fixes: c9a83e76b5a9 ("selftests/bpf: Fix compile if backtrace support missing in libc")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Tony Ambardar <tony.ambardar@gmail.com>
Reviewed-by: Tony Ambardar <tony.ambardar@gmail.com>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/20241003210307.3847907-1-eddyz87@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4236f114a3ffbbfd217436c08852e94cae372f57 ]
During the xdp_adjust_tail test, probabilistic failure occurs and SKB package
is discarded by the kernel. After checking the issues by tracking SKB package,
it is identified that they were caused by checksum errors. Refer to checksum
of the arch/arm64/include/asm/checksum.h for fixing.
v2: Based on Alexei Starovoitov's suggestions, it is necessary to keep the code
implementation consistent.
Fixes: c6ffd1ff78 (bpf: add bpf_xdp_adjust_tail sample prog)
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240930024115.52841-1-chenyuan_fl@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00ae002116a14c2e6a342c4c9ae080cdbb9b4b21 ]
The bridge might miss the display change events when it's powered off.
This happens when a user changes the external monitor when the system
is suspended and the embedded controller doesn't not wake AP up.
It's also observed that one DP-to-HDMI bridge doesn't work correctly
when there is no EDID read after it is powered on.
Drop the cache to force an EDID read after system resume to fix this.
Fixes: 8bdfc5dae4 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926092931.3870342-2-treapking@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4649cbd97fdae5069e9a71cd7669b62b90e03669 ]
Some fix and updates in the following items:
1. examples:
Update generic node name to 'audio-codec' to comply with the
coming change in 'mt6359.dtsi'. This change is necessary to fix the
dtbs_check error:
pmic: 'mt6359codec' does not match any of the regexes: 'pinctrl-[0-9]+'
2. mediatek,dmic-mode:
After inspecting the .dts and .dtsi files using 'mt6359-codec', it was
discovered that the definitions of 'two wires' and 'one wire' are
inverted compared to the DT schema.
For example, the following boards using MT6359 PMIC:
- mt8192-asurada.dtsi
- mt8195-cherry.dtsi
These boards use the same definitions of 'dmic-mode' as other boards
using MT6358 PMIC. The meaning of '0' or '1' has been noted as comments
in the device trees.
Upon examining the code in [1] and [2], it was confirmed that the
definitions of 'dmic-mode' are consistent between "MT6359 PMIC" and
"MT6358 PMIC". Therefore, the DT Schema should be correct as is.
References:
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6358.c#n1875
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6359.c#L1515
Fixes: 539237d1c6 ("dt-bindings: mediatek: mt6359: add codec document")
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240930075451.14196-1-macpaul.lin@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52db16ec5bae7bd027804265b968259d1a6c3970 ]
In supported_vht_mcs_rate_nss2, the rate for MCS9 & VHT20 is defined as
{1560, 1733}, this does not align with firmware's definition and therefore
fails the verification in ath10k_mac_get_rate_flags_vht():
invalid vht params rate 1730 100kbps nss 2 mcs 9
and:
invalid vht params rate 1920 100kbps nss 2 mcs 9
Change it to {1730, 1920} to align with firmware to fix the issue.
Since ath10k_hw_params::supports_peer_stats_info is enabled only for
QCA6174, this change does not affect other chips.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00309-QCARMSWPZ-1
Fixes: 3344b99d69 ("ath10k: add bitrate parse for peer stats info")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/lkml/fba24cd3-4a1e-4072-8585-8402272788ff@molgen.mpg.de/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240711020344.98040-3-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf1becb7f996a0a23ea2c270cf6bb0911ec3ca1a ]
We must first flush the MMU cache and then, flush the TLB, not the other
way around. Currently, we can see a race condition between the MMU cache
and the TLB when running multiple rendering processes at the same time.
This is evidenced by MMU errors triggered by the IRQ.
Fix the MMU flush order by flushing the MMU cache and then the TLB.
Also, in order to address the race condition, wait for the MMU cache flush
to finish before starting the TLB flush.
Fixes: 57692c94dc ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-2-mcanal@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a88fee2d67d9b78c24630a987a88ccf886b2498b ]
smatch reports:
drivers/gpu/drm/omapdrm/dss/base.c:176 omapdss_device_disconnect() error: we previously assumed 'src' could be null (see line 169)
This code is mostly from a time when omapdrm had its own display device
model. I can't honestly remember the details, and I don't think it's
worth digging in deeply into that for a legacy driver.
However, it looks like we only call omapdss_device_disconnect() and
omapdss_device_connect() with NULL as the src parameter. We can thus
drop the src parameter from both functions, and fix the smatch warning.
I don't think omapdss_device_disconnect() ever gets NULL for the dst
parameter (if it did, we'd crash soon after returning from the
function), but I have kept the !dst check, just in case, but I added a
WARN_ON() there.
Also, if the dst parameter can be NULL, we can't always get the struct
dss_device pointer from dst->dss (which is only used for a debug print).
To make sure we can't hit that issue, do it similarly to the
omapdss_device_connect() function: add 'struct dss_device *dss' as the
first parameter, so that we always have it regardless of the dst.
Fixes: 79107f274b ("drm/omap: Add support for drm_bridge")
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806-omapdrm-misc-fixes-v1-1-15d31aea0831@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8619593634cbdf5abf43f5714df49b04e4ef09ab ]
I found the following bug in my fuzzer:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath9k/htc_hst.c:26:51
index 255 is out of range for type 'htc_endpoint [22]'
CPU: 0 UID: 0 PID: 8 Comm: kworker/0:0 Not tainted 6.11.0-rc6-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
<TASK>
dump_stack_lvl+0x180/0x1b0
__ubsan_handle_out_of_bounds+0xd4/0x130
htc_issue_send.constprop.0+0x20c/0x230
? _raw_spin_unlock_irqrestore+0x3c/0x70
ath9k_wmi_cmd+0x41d/0x610
? mark_held_locks+0x9f/0xe0
...
Since this bug has been confirmed to be caused by insufficient verification
of conn_rsp_epid, I think it would be appropriate to add a range check for
conn_rsp_epid to htc_connect_service() to prevent the bug from occurring.
Fixes: fb9987d0f7 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240909103855.68006-1-aha310510@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ab6512e7942889c0962588355cb92424a690be6 ]
When factoring out __vc4_hvs_stop_channel, the logic got inverted from
if (condition)
// stop channel
to
if (condition)
goto out
//stop channel
out:
and also changed the exact register writes used to stop the channel.
Correct the logic so that the channel is actually stopped, and revert
to the original register writes.
Fixes: 6d01a106b4 ("drm/vc4: crtc: Move HVS init and close to a function")
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-32-dave.stevenson@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53bd7c1c0077db533472ae32799157758302ef48 ]
The INTERVAL_TREE_DEFINE() uncoditionally provides a bunch of helper
functions which in some cases may be not used. This, in particular,
prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y:
.../drm/drm_mm.c:152:1: error: unused function 'drm_mm_interval_tree_insert' [-Werror,-Wunused-function]
152 | INTERVAL_TREE_DEFINE(struct drm_mm_node, rb,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
153 | u64, __subtree_last,
| ~~~~~~~~~~~~~~~~~~~~
154 | START, LAST, static inline, drm_mm_interval_tree)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by marking drm_mm_interval_tree*() functions with __maybe_unused.
See also commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Fixes: 202b52b7fb ("drm: Track drm_mm nodes with an interval tree")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829154640.1120050-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c7bebc1a3f0661db558d60e14dde27fc216d9dc ]
When an error occurs in sysfs show callback, we should return the errno
directly instead of formatting it as the result, which produces
meaningless output and doesn't inform the userspace of the error.
Fixes: 468f96bfa3 ("platform/x86: panasonic-laptop: Add support for battery charging threshold (eco mode)")
Fixes: d5a81d8e86 ("platform/x86: panasonic-laptop: Add support for optical driver power in Y and W series")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241118064637.61832-3-ziyao@disroot.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed61c59139509f76d3592683c90dc3fdc6e23cd6 ]
In ia_css_3a_statistics_allocate(), there is no check on the allocation
result of the rgby_data memory. If rgby_data is not successfully
allocated, it may trigger the assert(host_stats->rgby_data) assertion in
ia_css_s3a_hmem_decode(). Adding a check to fix this potential issue.
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241104145051.3088231-1-lihuafei1@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48ed4e799e8fbebae838dca404a8527763d41191 ]
The MBM and MBA tests need to discover the event and umask with which to
configure the performance event used to measure read memory bandwidth.
This is done by parsing the
/sys/bus/event_source/devices/uncore_imc_<imc instance>/events/cas_count_read
file for each iMC instance that contains the formatted
output: "event=<event>,umask=<umask>"
Parsing of cas_count_read contents is done by initializing an array of
MAX_TOKENS elements with tokens (deliminated by "=,") from this file.
Remove the unnecessary append of a delimiter to the string needing to be
parsed. Per the strtok() man page: "delimiter bytes at the start or end of
the string are ignored". This has no impact on the token placement within
the array.
After initialization, the actual event and umask is determined by
parsing the tokens directly following the "event" and "umask" tokens
respectively.
Iterating through the array up to index "i < MAX_TOKENS" but then
accessing index "i + 1" risks array overrun during the final iteration.
Avoid array overrun by ensuring that the index used within for
loop will always be valid.
Fixes: 1d3f08687d ("selftests/resctrl: Read memory bandwidth from perf IMC counter and from resctrl file system")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaecb1da58a72bfbd2c35d4aadc43caa02f11862 ]
When the fixed regulators for the LCD panel and DP bridge were added,
their supplies were not modeled in. These, except for the 1.0V supply,
are just load switches, and need and have a supply.
Add the supplies for each of the fixed regulators.
Fixes: cabc71b08e ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241030070224.1006331-4-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4e8cf13f1740037483565d5b802764e2426515b ]
Some of the regulator supplies for the MIPI-DPI-to-DP bridge and their
associated nodes are incorrectly named. In particular, the 1.0V supply
was modeled as a 1.2V supply.
Fix all the incorrect names, and also fix the voltage of the 1.0V
regulator.
Fixes: cabc71b08e ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241030070224.1006331-3-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 953e549471cabc9d4980f1da2e9fa79f4c23da06 ]
Lockdep gives a false positive splat as it can't distinguish the lock
which is taken by different IRQ descriptors from different IRQ chips
that are organized in a way of a hierarchy:
======================================================
WARNING: possible circular locking dependency detected
6.12.0-rc5-next-20241101-00148-g9fabf8160b53 #562 Tainted: G W
------------------------------------------------------
modprobe/141 is trying to acquire lock:
ffff899446947868 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}, at: regmap_update_bits_base+0x33/0x90
but task is already holding lock:
ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790
which lock already depends on the new lock.
-> #3 (&d->lock){+.+.}-{4:4}:
-> #2 (&desc->request_mutex){+.+.}-{4:4}:
-> #1 (ipclock){+.+.}-{4:4}:
-> #0 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}:
Chain exists of:
intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock --> &desc->request_mutex --> &d->lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&d->lock);
lock(&desc->request_mutex);
lock(&d->lock);
lock(intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock);
*** DEADLOCK ***
3 locks held by modprobe/141:
#0: ffff8994419368f8 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xf6/0x250
#1: ffff89944690b250 (&desc->request_mutex){+.+.}-{4:4}, at: __setup_irq+0x1a2/0x790
#2: ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790
Set a lockdep class when we map the IRQ so that it doesn't warn about
a lockdep bug that doesn't exist.
Fixes: 4af8be67fd ("regmap: Convert regmap_irq to use irq_domain")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241101165553.4055617-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f399051ec1ff02e74ae5c2517aed2cc486fd005b ]
A shift-out-of-bounds issue was identified by UBSAN in the
tegra_qspi_fill_tx_fifo_from_client_txbuf() function.
UBSAN: shift-out-of-bounds in drivers/spi/spi-tegra210-quad.c:345:27
shift exponent 32 is too large for 32-bit type 'u32' (aka 'unsigned int')
Call trace:
tegra_qspi_start_cpu_based_transfer
The problem arises when shifting the contents of tx_buf left by 8 times
the value of i, which can exceed 4 and result in an exponent larger than
32 bits.
Resolve this by restrict the value of i to be less than 4, preventing
the shift operation from overflowing.
Signed-off-by: Breno Leitao <leitao@debian.org>
Fixes: 921fc1838f ("spi: tegra210-quad: Add support for Tegra210 QSPI controller")
Link: https://patch.msgid.link/20241004125400.1791089-1-leitao@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afc2331ef81657493c074592c409dac7c3cb8ccc ]
of_parse_phandle_with_args() needs to call of_node_put() to decrement
the refcount of args.np. So, Add the missing of_node_put() in the loop.
Fixes: efa5c01cd7 ("soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one")
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Message-ID: <20241024030442.119506-2-zhangzekun11@huawei.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd36ad71ad65968f97630808bc8d605c929b128e ]
The DCDC5 voltage rail in the X-Powers AXP809 PMIC has a resolution of
50mV, so the currently enforced limits of 1.475 and 1.525 volts cannot
be set, when the existing regulator value is beyond this range.
This will lead to the whole regulator driver to give up and fail
probing, which in turn will hang the system, as essential devices depend
on the PMIC.
In this case a bug in U-Boot set the voltage to 1.75V (meant for DCDC4),
and the AXP driver's attempt to correct this lead to this error:
==================
[ 4.447653] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
[ 4.450066] vcc-dram: Bringing 1750000uV into 1575000-1575000uV
[ 4.460272] vcc-dram: failed to apply 1575000-1575000uV constraint: -EINVAL
[ 4.474788] axp20x-regulator axp20x-regulator.0: Failed to register dcdc5
[ 4.482276] axp20x-regulator axp20x-regulator.0: probe with driver axp20x-regulator failed with error -22
==================
Set the limits to values that can be programmed, so any correction will
be successful.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Fixes: 1e1dea7265 ("ARM: dts: sun9i: cubieboard4: Add AXP809 PMIC device node and regulators")
Link: https://patch.msgid.link/20241007222916.19013-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a25351e4c7740eb22561a3ee4ef17611c6f410b0 ]
Implement workaround for ERR051198
(https://www.nxp.com/docs/en/errata/IMX8MN_0N14Y.pdf)
PWM output may not function correctly if the FIFO is empty when a new SAR
value is programmed.
Description:
When the PWM FIFO is empty, a new value programmed to the PWM Sample
register (PWM_PWMSAR) will be directly applied even if the current timer
period has not expired. If the new SAMPLE value programmed in the
PWM_PWMSAR register is less than the previous value, and the PWM counter
register (PWM_PWMCNR) that contains the current COUNT value is greater
than the new programmed SAMPLE value, the current period will not flip
the level. This may result in an output pulse with a duty cycle of 100%.
Workaround:
Program the current SAMPLE value in the PWM_PWMSAR register before
updating the new duty cycle to the SAMPLE value in the PWM_PWMSAR
register. This will ensure that the new SAMPLE value is modified during
a non-empty FIFO, and can be successfully updated after the period
expires.
Write the old SAR value before updating the new duty cycle to SAR. This
avoids writing the new value into an empty FIFO.
This only resolves the issue when the PWM period is longer than 2us
(or <500kHz) because write register is not quick enough when PWM period is
very short.
Reproduce steps:
cd /sys/class/pwm/pwmchip1/pwm0
echo 2000000000 > period # It is easy to observe by using long period
echo 1000000000 > duty_cycle
echo 1 > enable
echo 8000 > duty_cycle # One full high pulse will be seen by scope
Fixes: 166091b189 ("[ARM] MXC: add pwm driver for i.MX SoCs")
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241008194123.1943141-1-Frank.Li@nxp.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2190df6c91373fdec6db9fc07e427084f232f57e ]
Only cgroup v2 can be attached by bpf programs, so this patch introduces
that cgroup_bpf_inherit and cgroup_bpf_offline can only be called in
cgroup v2, and this can fix the memleak mentioned by commit 04f8ef5643
("cgroup: Fix memory leak caused by missing cgroup_bpf_offline"), which
has been reverted.
Fixes: 2b0d3d3e4f ("percpu_ref: reduce memory footprint of percpu_ref in fast path")
Fixes: 4bfc0bb2c6 ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
Link: https://lore.kernel.org/cgroups/aka2hk5jsel5zomucpwlxsej6iwnfw4qu5jkrmjhyfhesjlfdw@46zxhg5bdnr7/
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
