[ Upstream commit c276a706ea ]
xfrm state selectors are matched against the inner-most flow
which can be of any address family. Therefore middle states
in nested configurations need to carry a wildcard selector in
order to work at all.
However, this is currently forbidden for transport-mode states.
Fix this by removing the unnecessary check.
Fixes: 13996378e6 ("[IPSEC]: Rename mode to outer_mode and add inner_mode")
Reported-by: David George <David.George@sophos.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 93827a0a36 upstream.
KVM enables 'Enlightened VMCS' and 'Enlightened MSR Bitmap' when running as
a nested hypervisor on top of Hyper-V. When MSR bitmap is updated,
evmcs_touch_msr_bitmap function uses current_vmcs per-cpu variable to mark
that the msr bitmap was changed.
vmx_vcpu_create() modifies the msr bitmap via vmx_disable_intercept_for_msr
-> vmx_msr_bitmap_l01_changed which in the end calls this function. The
function checks for current_vmcs if it is null but the check is
insufficient because current_vmcs is not initialized. Because of this, the
code might incorrectly write to the structure pointed by current_vmcs value
left by another task. Preemption is not disabled, the current task can be
preempted and moved to another CPU while current_vmcs is accessed multiple
times from evmcs_touch_msr_bitmap() which leads to crash.
The manipulation of MSR bitmaps by callers happens only for vmcs01 so the
solution is to use vmx->vmcs01.vmcs instead of current_vmcs.
BUG: kernel NULL pointer dereference, address: 0000000000000338
PGD 4e1775067 P4D 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
...
RIP: 0010:vmx_msr_bitmap_l01_changed+0x39/0x50 [kvm_intel]
...
Call Trace:
vmx_disable_intercept_for_msr+0x36/0x260 [kvm_intel]
vmx_vcpu_create+0xe6/0x540 [kvm_intel]
kvm_arch_vcpu_create+0x1d1/0x2e0 [kvm]
kvm_vm_ioctl_create_vcpu+0x178/0x430 [kvm]
kvm_vm_ioctl+0x53f/0x790 [kvm]
__x64_sys_ioctl+0x8a/0xc0
do_syscall_64+0x5c/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: ceef7d10df ("KVM: x86: VMX: hyper-v: Enlightened MSR-Bitmap support")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Link: https://lore.kernel.org/r/20230123221208.4964-1-alexandru.matei@uipath.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
[manual backport: evmcs.h got renamed to hyperv.h in a later
version, modified in evmcs.h instead]
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b84155c380 upstream.
In preparation to enabling 'Enlightened MSR Bitmap' feature for Hyper-V
guests move MSR bitmap update tracking to a dedicated helper.
Note: vmx_msr_bitmap_l01_changed() is called when MSR bitmap might be
updated. KVM doesn't check if the bit we're trying to set is already set
(or the bit it's trying to clear is already cleared). Such situations
should not be common and a few false positives should not be a problem.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211129094704.326635-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 250552b925 upstream.
When KVM runs as a nested hypervisor on top of Hyper-V it uses Enlightened
VMCS and enables Enlightened MSR Bitmap feature for its L1s and L2s (which
are actually L2s and L3s from Hyper-V's perspective). When MSR bitmap is
updated, KVM has to reset HV_VMX_ENLIGHTENED_CLEAN_FIELD_MSR_BITMAP from
clean fields to make Hyper-V aware of the change. For KVM's L1s, this is
done in vmx_disable_intercept_for_msr()/vmx_enable_intercept_for_msr().
MSR bitmap for L2 is build in nested_vmx_prepare_msr_bitmap() by blending
MSR bitmap for L1 and L1's idea of MSR bitmap for L2. KVM, however, doesn't
check if the resulting bitmap is different and never cleans
HV_VMX_ENLIGHTENED_CLEAN_FIELD_MSR_BITMAP in eVMCS02. This is incorrect and
may result in Hyper-V missing the update.
The issue could've been solved by calling evmcs_touch_msr_bitmap() for
eVMCS02 from nested_vmx_prepare_msr_bitmap() unconditionally but doing so
would not give any performance benefits (compared to not using Enlightened
MSR Bitmap at all). 3-level nesting is also not a very common setup
nowadays.
Don't enable 'Enlightened MSR Bitmap' feature for KVM's L2s (real L3s) for
now.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211129094704.326635-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b99ddbe833 upstream.
With CONFIG_VIRTIO_UML=y, GNU ld < 2.36 fails to link UML vmlinux
(w/wo CONFIG_LD_SCRIPT_STATIC).
`.exit.text' referenced in section `.uml.exitcall.exit' of arch/um/drivers/virtio_uml.o: defined in discarded section `.exit.text' of arch/um/drivers/virtio_uml.o
collect2: error: ld returned 1 exit status
This fix is similar to the following commits:
- 4b9880dbf3 ("powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT")
- a494398bde ("s390: define RUNTIME_DISCARD_EXIT to fix link error
with GNU ld < 2.36")
- c1c551bebf ("sh: define RUNTIME_DISCARD_EXIT")
Fixes: 99cb0d917f ("arch: fix broken BuildID for arm64 and riscv")
Reported-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1c551bebf upstream.
sh vmlinux fails to link with GNU ld < 2.40 (likely < 2.36) since
commit 99cb0d917f ("arch: fix broken BuildID for arm64 and riscv").
This is similar to fixes for powerpc and s390:
commit 4b9880dbf3 ("powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT").
commit a494398bde ("s390: define RUNTIME_DISCARD_EXIT to fix link error
with GNU ld < 2.36").
$ sh4-linux-gnu-ld --version | head -n1
GNU ld (GNU Binutils for Debian) 2.35.2
$ make ARCH=sh CROSS_COMPILE=sh4-linux-gnu- microdev_defconfig
$ make ARCH=sh CROSS_COMPILE=sh4-linux-gnu-
`.exit.text' referenced in section `__bug_table' of crypto/algboss.o:
defined in discarded section `.exit.text' of crypto/algboss.o
`.exit.text' referenced in section `__bug_table' of
drivers/char/hw_random/core.o: defined in discarded section
`.exit.text' of drivers/char/hw_random/core.o
make[2]: *** [scripts/Makefile.vmlinux:34: vmlinux] Error 1
make[1]: *** [Makefile:1252: vmlinux] Error 2
arch/sh/kernel/vmlinux.lds.S keeps EXIT_TEXT:
/*
* .exit.text is discarded at runtime, not link time, to deal with
* references from __bug_table
*/
.exit.text : AT(ADDR(.exit.text)) { EXIT_TEXT }
However, EXIT_TEXT is thrown away by
DISCARD(include/asm-generic/vmlinux.lds.h) because
sh does not define RUNTIME_DISCARD_EXIT.
GNU ld 2.40 does not have this issue and builds fine.
This corresponds with Masahiro's comments in a494398bde:
"Nathan [Chancellor] also found that binutils
commit 21401fc7bf67 ("Duplicate output sections in scripts") cured this
issue, so we cannot reproduce it with binutils 2.36+, but it is better
to not rely on it."
Link: https://lkml.kernel.org/r/9166a8abdc0f979e50377e61780a4bba1dfa2f52.1674518464.git.tom.saeger@oracle.com
Fixes: 99cb0d917f ("arch: fix broken BuildID for arm64 and riscv")
Link: https://lore.kernel.org/all/Y7Jal56f6UBh1abE@dev-arch.thelio-3990X/
Link: https://lore.kernel.org/all/20230123194218.47ssfzhrpnv3xfez@oracle.com/
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dennis Gilmore <dennis@ausil.us>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a494398bde upstream.
Nathan Chancellor reports that the s390 vmlinux fails to link with
GNU ld < 2.36 since commit 99cb0d917f ("arch: fix broken BuildID
for arm64 and riscv").
It happens for defconfig, or more specifically for CONFIG_EXPOLINE=y.
$ s390x-linux-gnu-ld --version | head -n1
GNU ld (GNU Binutils for Debian) 2.35.2
$ make -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- allnoconfig
$ ./scripts/config -e CONFIG_EXPOLINE
$ make -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- olddefconfig
$ make -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu-
`.exit.text' referenced in section `.s390_return_reg' of drivers/base/dd.o: defined in discarded section `.exit.text' of drivers/base/dd.o
make[1]: *** [scripts/Makefile.vmlinux:34: vmlinux] Error 1
make: *** [Makefile:1252: vmlinux] Error 2
arch/s390/kernel/vmlinux.lds.S wants to keep EXIT_TEXT:
.exit.text : {
EXIT_TEXT
}
But, at the same time, EXIT_TEXT is thrown away by DISCARD because
s390 does not define RUNTIME_DISCARD_EXIT.
I still do not understand why the latter wins after 99cb0d917f,
but defining RUNTIME_DISCARD_EXIT seems correct because the comment
line in arch/s390/kernel/vmlinux.lds.S says:
/*
* .exit.text is discarded at runtime, not link time,
* to deal with references from __bug_table
*/
Nathan also found that binutils commit 21401fc7bf67 ("Duplicate output
sections in scripts") cured this issue, so we cannot reproduce it with
binutils 2.36+, but it is better to not rely on it.
Fixes: 99cb0d917f ("arch: fix broken BuildID for arm64 and riscv")
Link: https://lore.kernel.org/all/Y7Jal56f6UBh1abE@dev-arch.thelio-3990X/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20230105031306.1455409-1-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07b050f929 upstream.
Relocatable kernels must not discard relocations, they need to be
processed at runtime. As such they are included for CONFIG_RELOCATABLE
builds in the powerpc linker script (line 340).
However they are also unconditionally discarded later in the
script (line 414). Previously that worked because the earlier inclusion
superseded the discard.
However commit 99cb0d917f ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro (line 137). With binutils < 2.36 that causes the DISCARD
directives later in the script to be applied earlier, causing .rela* to
actually be discarded at link time, leading to build warnings and a
kernel that doesn't boot:
ld: warning: discarding dynamic section .rela.init.rodata
Fix it by conditionally discarding .rela* only when CONFIG_RELOCATABLE
is disabled.
Fixes: 99cb0d917f ("arch: fix broken BuildID for arm64 and riscv")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230105132349.384666-2-mpe@ellerman.id.au
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b9880dbf3 upstream.
The powerpc linker script explicitly includes .exit.text, because
otherwise the link fails due to references from __bug_table and
__ex_table. The code is freed (discarded) at runtime along with
.init.text and data.
That has worked in the past despite powerpc not defining
RUNTIME_DISCARD_EXIT because DISCARDS appears late in the powerpc linker
script (line 410), and the explicit inclusion of .exit.text
earlier (line 280) supersedes the discard.
However commit 99cb0d917f ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro (line 136). With binutils < 2.36 that causes the DISCARD
directives later in the script to be applied earlier [1], causing
.exit.text to actually be discarded at link time, leading to build
errors:
'.exit.text' referenced in section '__bug_table' of crypto/algboss.o: defined in
discarded section '.exit.text' of crypto/algboss.o
'.exit.text' referenced in section '__ex_table' of drivers/nvdimm/core.o: defined in
discarded section '.exit.text' of drivers/nvdimm/core.o
Fix it by defining RUNTIME_DISCARD_EXIT, which causes the generic
DISCARDS macro to not include .exit.text at all.
1: https://lore.kernel.org/lkml/87fscp2v7k.fsf@igel.home/
Fixes: 99cb0d917f ("arch: fix broken BuildID for arm64 and riscv")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230105132349.384666-1-mpe@ellerman.id.au
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99cb0d917f upstream.
Dennis Gilmore reports that the BuildID is missing in the arm64 vmlinux
since commit 994b7ac169 ("arm64: remove special treatment for the
link order of head.o").
The issue is that the type of .notes section, which contains the BuildID,
changed from NOTES to PROGBITS.
Ard Biesheuvel figured out that whichever object gets linked first gets
to decide the type of a section. The PROGBITS type is the result of the
compiler emitting .note.GNU-stack as PROGBITS rather than NOTE.
While Ard provided a fix for arm64, I want to fix this globally because
the same issue is happening on riscv since commit 2348e6bf44 ("riscv:
remove special treatment for the link order of head.o"). This problem
will happen in general for other architectures if they start to drop
unneeded entries from scripts/head-object-list.txt.
Discard .note.GNU-stack in include/asm-generic/vmlinux.lds.h.
Link: https://lore.kernel.org/lkml/CAABkxwuQoz1CTbyb57n0ZX65eSYiTonFCU8-LCQc=74D=xE=rA@mail.gmail.com/
Fixes: 994b7ac169 ("arm64: remove special treatment for the link order of head.o")
Fixes: 2348e6bf44 ("riscv: remove special treatment for the link order of head.o")
Reported-by: Dennis Gilmore <dennis@ausil.us>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
[Tom: stable backport 5.15.y, 5.10.y, 5.4.y]
Though the above "Fixes:" commits are not in this kernel, the conditions
which lead to a missing Build ID in arm64 vmlinux are similar.
Evidence points to these conditions:
1. ld version > 2.36 (exact binutils commit documented in a494398bde)
2. first object which gets linked (head.o) has a PROGBITS .note.GNU-stack segment
These conditions can be observed when:
- 5.15.60+ OR 5.10.136+ OR 5.4.210+
- AND ld version > 2.36
- AND arch=arm64
- AND CONFIG_MODVERSIONS=y
There are notable differences in the vmlinux elf files produced
before(bad) and after(good) applying this series.
Good: p_type:PT_NOTE segment exists.
Bad: p_type:PT_NOTE segment is missing.
Good: sh_name_str:.notes section has sh_type:SHT_NOTE
Bad: sh_name_str:.notes section has sh_type:SHT_PROGBITS
`readelf -n` (as of v2.40) searches for Build Id
by processing only the very first note in sh_type:SHT_NOTE sections.
This was previously bisected to the stable backport of 0d362be5b1.
Follow-up experiments were discussed here: https://lore.kernel.org/all/20221221235413.xaisboqmr7dkqwn6@oracle.com/
which strongly hints at condition 2.
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e1c2b86ef upstream.
Block range to free is validated in ext4_free_blocks() using
ext4_inode_block_valid() and then it's passed to ext4_mb_clear_bb().
However in some situations on bigalloc file system the range might be
adjusted after the validation in ext4_free_blocks() which can lead to
troubles on corrupted file systems such as one found by syzkaller that
resulted in the following BUG
kernel BUG at fs/ext4/ext4.h:3319!
PREEMPT SMP NOPTI
CPU: 28 PID: 4243 Comm: repro Kdump: loaded Not tainted 5.19.0-rc6+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1.fc35 04/01/2014
RIP: 0010:ext4_free_blocks+0x95e/0xa90
Call Trace:
<TASK>
? lock_timer_base+0x61/0x80
? __es_remove_extent+0x5a/0x760
? __mod_timer+0x256/0x380
? ext4_ind_truncate_ensure_credits+0x90/0x220
ext4_clear_blocks+0x107/0x1b0
ext4_free_data+0x15b/0x170
ext4_ind_truncate+0x214/0x2c0
? _raw_spin_unlock+0x15/0x30
? ext4_discard_preallocations+0x15a/0x410
? ext4_journal_check_start+0xe/0x90
? __ext4_journal_start_sb+0x2f/0x110
ext4_truncate+0x1b5/0x460
? __ext4_journal_start_sb+0x2f/0x110
ext4_evict_inode+0x2b4/0x6f0
evict+0xd0/0x1d0
ext4_enable_quotas+0x11f/0x1f0
ext4_orphan_cleanup+0x3de/0x430
? proc_create_seq_private+0x43/0x50
ext4_fill_super+0x295f/0x3ae0
? snprintf+0x39/0x40
? sget_fc+0x19c/0x330
? ext4_reconfigure+0x850/0x850
get_tree_bdev+0x16d/0x260
vfs_get_tree+0x25/0xb0
path_mount+0x431/0xa70
__x64_sys_mount+0xe2/0x120
do_syscall_64+0x5b/0x80
? do_user_addr_fault+0x1e2/0x670
? exc_page_fault+0x70/0x170
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fdf4e512ace
Fix it by making sure that the block range is properly validated before
used every time it changes in ext4_free_blocks() or ext4_mb_clear_bb().
Link: https://syzkaller.appspot.com/bug?id=5266d464285a03cee9dbfda7d2452a72c3c2ae7c
Reported-by: syzbot+15cd994e273307bf5cfa@syzkaller.appspotmail.com
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Tadeusz Struk <tadeusz.struk@linaro.org>
Tested-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220714165903.58260-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db05ddf7f3 upstream.
You will get two decrements when the messages on a panic are sent, not
one, since commit 2033f68589 ("ipmi: Free receive messages when in an
oops") was added, but the watchdog code had a bug where it didn't set
the value properly.
Reported-by: Anton Lundin <glance@acc.umu.se>
Cc: <Stable@vger.kernel.org> # v5.4+
Fixes: 2033f68589 ("ipmi: Free receive messages when in an oops")
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit afa4805799 ]
Gain control is badly documented in publicly available (including
leaked) documentation.
There is an AGC pre-gain in register 0x3a13, expressed as a 6-bit value
(plus an enable bit in bit 6). The driver hardcodes it to 0x43, which
one application note states is equal to x1.047. The documentation also
states that 0x40 is equel to x1.000. The pre-gain thus seems to be
expressed as in 1/64 increments, and thus ranges from x1.00 to x1.984.
What the pre-gain does is however unspecified.
There is then an AGC gain limit, in registers 0x3a18 and 0x3a19,
expressed as a 10-bit "real gain format" value. One application note
sets it to 0x00f8 and states it is equal to x15.5, so it appears to be
expressed in 1/16 increments, up to x63.9375.
The manual gain is stored in registers 0x350a and 0x350b, also as a
10-bit "real gain format" value. It is documented in the application
note as a Q6.4 values, up to x63.9375.
One version of the datasheet indicates that the sensor supports a
digital gain:
The OV5640 supports 1/2/4 digital gain. Normally, the gain is
controlled automatically by the automatic gain control (AGC) block.
It isn't clear how that would be controlled manually.
There appears to be no indication regarding whether the gain controlled
through registers 0x350a and 0x350b is an analogue gain only or also
includes digital gain. The words "real gain" don't necessarily mean
"combined analogue and digital gains". Some OmniVision sensors (such as
the OV8858) are documented as supoprting different formats for the gain
values, selectable through a register bit, and they are called "real
gain format" and "sensor gain format". For that sensor, we have (one of)
the gain registers documented as
0x3503[2]=0, gain[7:0] is real gain format, where low 4 bits are
fraction bits, for example, 0x10 is 1x gain, 0x28 is 2.5x gain
If 0x3503[2]=1, gain[7:0] is sensor gain format, gain[7:4] is coarse
gain, 00000: 1x, 00001: 2x, 00011: 4x, 00111: 8x, gain[7] is 1,
gain[3:0] is fine gain. For example, 0x10 is 1x gain, 0x30 is 2x gain,
0x70 is 4x gain
(The second part of the text makes little sense)
"Real gain" may thus refer to the combination of the coarse and fine
analogue gains as a single value.
The OV5640 0x350a and 0x350b registers thus appear to control analogue
gain. The driver incorrectly uses V4L2_CID_GAIN as V4L2 has a specific
control for analogue gain, V4L2_CID_ANALOGUE_GAIN. Use it.
If registers 0x350a and 0x350b are later found to control digital gain
as well, the driver could then restrict the range of the analogue gain
control value to lower than x64 and add a separate digital gain control.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87c7ee67de ]
In the follow-up of commit fb3041d61f ("kbuild: fix SIGPIPE error
message for AR=gcc-ar and AR=llvm-ar"), Kees Cook pointed out that
tools should _not_ catch their own SIGPIPEs [1] [2].
Based on his feedback, LLVM was fixed [3].
However, Python's default behavior is to show noisy bracktrace when
SIGPIPE is sent. So, scripts written in Python are basically in the
same situation as the buggy llvm tools.
Example:
$ make -s allnoconfig
$ make -s allmodconfig
$ scripts/diffconfig .config.old .config | head -n1
-ALIX n
Traceback (most recent call last):
File "/home/masahiro/linux/scripts/diffconfig", line 132, in <module>
main()
File "/home/masahiro/linux/scripts/diffconfig", line 130, in main
print_config("+", config, None, b[config])
File "/home/masahiro/linux/scripts/diffconfig", line 64, in print_config
print("+%s %s" % (config, new_value))
BrokenPipeError: [Errno 32] Broken pipe
Python documentation [4] notes how to make scripts die immediately and
silently:
"""
Piping output of your program to tools like head(1) will cause a
SIGPIPE signal to be sent to your process when the receiver of its
standard output closes early. This results in an exception like
BrokenPipeError: [Errno 32] Broken pipe. To handle this case,
wrap your entry point to catch this exception as follows:
import os
import sys
def main():
try:
# simulate large output (your code replaces this loop)
for x in range(10000):
print("y")
# flush output here to force SIGPIPE to be triggered
# while inside this try block.
sys.stdout.flush()
except BrokenPipeError:
# Python flushes standard streams on exit; redirect remaining output
# to devnull to avoid another BrokenPipeError at shutdown
devnull = os.open(os.devnull, os.O_WRONLY)
os.dup2(devnull, sys.stdout.fileno())
sys.exit(1) # Python exits with error code 1 on EPIPE
if __name__ == '__main__':
main()
Do not set SIGPIPE’s disposition to SIG_DFL in order to avoid
BrokenPipeError. Doing that would cause your program to exit
unexpectedly whenever any socket connection is interrupted while
your program is still writing to it.
"""
Currently, tools/perf/scripts/python/intel-pt-events.py seems to be the
only script that fixes the issue that way.
tools/perf/scripts/python/compaction-times.py uses another approach
signal.signal(signal.SIGPIPE, signal.SIG_DFL) but the Python
documentation clearly says "Don't do it".
I cannot fix all Python scripts since there are so many.
I fixed some in the scripts/ directory.
[1]: https://lore.kernel.org/all/202211161056.1B9611A@keescook/
[2]: https://github.com/llvm/llvm-project/issues/59037
[3]: 4787efa380
[4]: https://docs.python.org/3/library/signal.html#note-on-sigpipe
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 748ea32d2d ]
Clang warns:
drivers/macintosh/windfarm_lm75_sensor.c:63:14: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
lm->inited = 1;
^ ~
drivers/macintosh/windfarm_smu_sensors.c:356:19: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
pow->fake_volts = 1;
^ ~
drivers/macintosh/windfarm_smu_sensors.c:368:18: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
pow->quadratic = 1;
^ ~
There is no bug here since no code checks the actual value of these
fields, just whether or not they are zero (boolean context), but this
can be easily fixed by switching to an unsigned type.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230215-windfarm-wsingle-bit-bitfield-constant-conversion-v1-1-26415072e855@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6b17a8b3e ]
Previously, R_ALPHA_LITERAL relocations would overflow for large kernel
modules.
This was because the Alpha's apply_relocate_add was relying on the kernel's
module loader to have sorted the GOT towards the very end of the module as it
was mapped into memory in order to correctly assign the global pointer. While
this behavior would mostly work fine for small kernel modules, this approach
would overflow on kernel modules with large GOT's since the global pointer
would be very far away from the GOT, and thus, certain entries would be out of
range.
This patch fixes this by instead using the Tru64 behavior of assigning the
global pointer to be 32KB away from the start of the GOT. The change made
in this patch won't work for multi-GOT kernel modules as it makes the
assumption the module only has one GOT located at the beginning of .got,
although for the vast majority kernel modules, this should be fine. Of the
kernel modules that would previously result in a relocation error, none of
them, even modules like nouveau, have even come close to filling up a single
GOT, and they've all worked fine under this patch.
Signed-off-by: Edward Humes <aurxenon@lunos.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a7ce82dc4 ]
In order for KCSAN to increase its likelihood of observing a data race,
it sets a watchpoint on memory accesses and stalls, allowing for
detection of conflicting accesses by other kernel threads or interrupts.
Stalls are implemented by injecting a call to udelay in instrumented code.
To prevent recursive instrumentation, exclude udelay from being instrumented.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206021801.105268-3-rmclure@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 109d587a4b ]
arch/mips/include/asm/mach-rc32434/pci.h:377:
cc1: error: result of ‘-117440512 << 16’ requires 44 bits to represent, but ‘int’ only has 32 bits [-Werror=shift-overflow=]
All bits in KORINA_STAT are already at the correct position, so there is
no addtional shift needed.
Signed-off-by: xurui <xurui@kylinos.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64dc8c732f ]
Our test report a uaf for 'bfqq->bic' in 5.10:
==================================================================
BUG: KASAN: use-after-free in bfq_select_queue+0x378/0xa30
CPU: 6 PID: 2318352 Comm: fsstress Kdump: loaded Not tainted 5.10.0-60.18.0.50.h602.kasan.eulerosv2r11.x86_64 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-20220320_160524-szxrtosci10000 04/01/2014
Call Trace:
bfq_select_queue+0x378/0xa30
bfq_dispatch_request+0xe8/0x130
blk_mq_do_dispatch_sched+0x62/0xb0
__blk_mq_sched_dispatch_requests+0x215/0x2a0
blk_mq_sched_dispatch_requests+0x8f/0xd0
__blk_mq_run_hw_queue+0x98/0x180
__blk_mq_delay_run_hw_queue+0x22b/0x240
blk_mq_run_hw_queue+0xe3/0x190
blk_mq_sched_insert_requests+0x107/0x200
blk_mq_flush_plug_list+0x26e/0x3c0
blk_finish_plug+0x63/0x90
__iomap_dio_rw+0x7b5/0x910
iomap_dio_rw+0x36/0x80
ext4_dio_read_iter+0x146/0x190 [ext4]
ext4_file_read_iter+0x1e2/0x230 [ext4]
new_sync_read+0x29f/0x400
vfs_read+0x24e/0x2d0
ksys_read+0xd5/0x1b0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Commit 3bc5e683c6 ("bfq: Split shared queues on move between cgroups")
changes that move process to a new cgroup will allocate a new bfqq to
use, however, the old bfqq and new bfqq can point to the same bic:
1) Initial state, two process with io in the same cgroup.
Process 1 Process 2
(BIC1) (BIC2)
| Λ | Λ
| | | |
V | V |
bfqq1 bfqq2
2) bfqq1 is merged to bfqq2.
Process 1 Process 2
(BIC1) (BIC2)
| |
\-------------\|
V
bfqq1 bfqq2(coop)
3) Process 1 exit, then issue new io(denoce IOA) from Process 2.
(BIC2)
| Λ
| |
V |
bfqq2(coop)
4) Before IOA is completed, move Process 2 to another cgroup and issue io.
Process 2
(BIC2)
Λ
|\--------------\
| V
bfqq2 bfqq3
Now that BIC2 points to bfqq3, while bfqq2 and bfqq3 both point to BIC2.
If all the requests are completed, and Process 2 exit, BIC2 will be
freed while there is no guarantee that bfqq2 will be freed before BIC2.
Fix the problem by clearing bfqq->bic while bfqq is detached from bic.
Fixes: 3bc5e683c6 ("bfq: Split shared queues on move between cgroups")
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221214030430.3304151-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03e1d60e17 ]
The watch_queue_set_size() allocation error paths return the ret value
set via the prior pipe_resize_ring() call, which will always be zero.
As a result, IOC_WATCH_QUEUE_SET_SIZE callers such as "keyctl watch"
fail to detect kernel wqueue->notes allocation failures and proceed to
KEYCTL_WATCH_KEY, with any notifications subsequently lost.
Fixes: c73be61ced ("pipe: Add general notification queue support")
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a8db5ec4a ]
We're currently using stop_machine() to update ftrace & kprobes, which
means that the thread that takes text_mutex during may not be the same
as the thread that eventually patches the code. This isn't actually a
race because the lock is still held (preventing any other concurrent
accesses) and there is only one thread running during stop_machine(),
but it does trigger a lockdep failure.
This patch just elides the lockdep check during stop_machine.
Fixes: c15ac4fd60 ("riscv/ftrace: Add dynamic function tracer support")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230303143754.4005217-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ca6705d9d ]
Fix a race where kthread_stop() may prevent the threadfn from ever getting
called. If that happens the svc_rqst will not be cleaned up.
Fixes: ed6473ddc7 ("NFSv4: Fix callback server shutdown")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce7ca79471 ]
Before determining whether the msg has unsupported options, it has been
prematurely terminated by the wrong status check.
For the application, the general usages of MSG_FASTOPEN likes
fd = socket(...)
/* rather than connect */
sendto(fd, data, len, MSG_FASTOPEN)
Hence, We need to check the flag before state check, because the sock
state here is always SMC_INIT when applications tries MSG_FASTOPEN.
Once we found unsupported options, fallback it to TCP.
Fixes: ee9dfbef02 ("net/smc: handle sockopts forcing fallback")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
v2 -> v1: Optimize code style
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfa659177d ]
The firmware only supports Logical Disk IDs up to 240 and LD ID 255 (0xFF)
is reserved for deleted LDs. However, in some cases, firmware was assigning
LD ID 254 (0xFE) to deleted LDs and this was causing the driver to mark the
wrong disk as deleted. This in turn caused the wrong disk device to be
taken offline by the SCSI midlayer.
To address this issue, limit the LD ID range from 255 to 240. This ensures
the deleted LD ID is properly identified and removed by the driver without
accidently deleting any valid LDs.
Fixes: ae6874ba4b ("scsi: megaraid_sas: Early detection of VD deletion through RaidMap update")
Reported-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20230302105342.34933-2-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 193250ace2 ]
Fix data corruption issue with SerDes connected PHYs operating at 1.25
Gbps speed where we could previously observe about 30% packet loss while
the bad packet counter was increasing.
As almost all boards with MediaTek MT7622 or MT7986 use either the MT7531
switch IC operating at 3.125Gbps SerDes rate or single-port PHYs using
rate-adaptation to 2500Base-X mode, this issue only got exposed now when
we started trying to use SFP modules operating with 1.25 Gbps with the
BananaPi R3 board.
The fix is to set bit 12 which disables the RX FIFO clear function when
setting up MAC MCR, MediaTek SDK did the same change stating:
"If without this patch, kernel might receive invalid packets that are
corrupted by GMAC."[1]
[1]: d8a2975939
Fixes: 42c03844e9 ("net-next: mediatek: add support for MediaTek MT7622 SoC")
Tested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/138da2735f92c8b6f8578ec2e5a794ee515b665f.1677937317.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b459804ff ]
btf_datasec_resolve contains a bug that causes the following BTF
to fail loading:
[1] DATASEC a size=2 vlen=2
type_id=4 offset=0 size=1
type_id=7 offset=1 size=1
[2] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none)
[3] PTR (anon) type_id=2
[4] VAR a type_id=3 linkage=0
[5] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none)
[6] TYPEDEF td type_id=5
[7] VAR b type_id=6 linkage=0
This error message is printed during btf_check_all_types:
[1] DATASEC a size=2 vlen=2
type_id=7 offset=1 size=1 Invalid type
By tracing btf_*_resolve we can pinpoint the problem:
btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_TBD) = 0
btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_TBD) = 0
btf_ptr_resolve(depth: 3, type_id: 3, mode: RESOLVE_PTR) = 0
btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_PTR) = 0
btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_PTR) = -22
The last invocation of btf_datasec_resolve should invoke btf_var_resolve
by means of env_stack_push, instead it returns EINVAL. The reason is that
env_stack_push is never executed for the second VAR.
if (!env_type_is_resolve_sink(env, var_type) &&
!env_type_is_resolved(env, var_type_id)) {
env_stack_set_next_member(env, i + 1);
return env_stack_push(env, var_type, var_type_id);
}
env_type_is_resolve_sink() changes its behaviour based on resolve_mode.
For RESOLVE_PTR, we can simplify the if condition to the following:
(btf_type_is_modifier() || btf_type_is_ptr) && !env_type_is_resolved()
Since we're dealing with a VAR the clause evaluates to false. This is
not sufficient to trigger the bug however. The log output and EINVAL
are only generated if btf_type_id_size() fails.
if (!btf_type_id_size(btf, &type_id, &type_size)) {
btf_verifier_log_vsi(env, v->t, vsi, "Invalid type");
return -EINVAL;
}
Most types are sized, so for example a VAR referring to an INT is not a
problem. The bug is only triggered if a VAR points at a modifier. Since
we skipped btf_var_resolve that modifier was also never resolved, which
means that btf_resolved_type_id returns 0 aka VOID for the modifier.
This in turn causes btf_type_id_size to return NULL, triggering EINVAL.
To summarise, the following conditions are necessary:
- VAR pointing at PTR, STRUCT, UNION or ARRAY
- Followed by a VAR pointing at TYPEDEF, VOLATILE, CONST, RESTRICT or
TYPE_TAG
The fix is to reset resolve_mode to RESOLVE_TBD before attempting to
resolve a VAR from a DATASEC.
Fixes: 1dc9285184 ("bpf: kernel side support for BTF Var and DataSec")
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230306112138.155352-2-lmb@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a02426787 ]
The xtables packet traverser performs an unconditional local_bh_disable(),
but the nf_tables evaluation loop does not.
Functions that are called from either xtables or nftables must assume
that they can be called in process context.
inet_twsk_deschedule_put() assumes that no softirq interrupt can occur.
If tproxy is used from nf_tables its possible that we'll deadlock
trying to aquire a lock already held in process context.
Add a small helper that takes care of this and use it.
Link: https://lore.kernel.org/netfilter-devel/401bd6ed-314a-a196-1cdc-e13c720cc8f2@balasys.hu/
Fixes: 4ed8eb6570 ("netfilter: nf_tables: Add native tproxy support")
Reported-and-tested-by: Major Dávid <major.david@balasys.hu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f7dd42f0d ]
It seems that change was unintentional, we have userspace code that
needs the mark while listening for events like REPLY, DESTROY, etc.
Also include 0-marks in requested dumps, as they were before that fix.
Fixes: 1feeae0715 ("netfilter: ctnetlink: fix compilation warning after data race fixes in ct mark")
Signed-off-by: Ivan Delalande <colona@arista.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit accd7e2369 ]
The driver needs to keep track of all the possible concurrent TPA (GRO/LRO)
completions on the aggregation ring. On P5 chips, the maximum number
of concurrent TPA is 256 and the amount of memory we allocate is order-5
on systems using 4K pages. Memory allocation failure has been reported:
NetworkManager: page allocation failure: order:5, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0-1
CPU: 15 PID: 2995 Comm: NetworkManager Kdump: loaded Not tainted 5.10.156 #1
Hardware name: Dell Inc. PowerEdge R660/0M1CC5, BIOS 0.2.25 08/12/2022
Call Trace:
dump_stack+0x57/0x6e
warn_alloc.cold.120+0x7b/0xdd
? _cond_resched+0x15/0x30
? __alloc_pages_direct_compact+0x15f/0x170
__alloc_pages_slowpath.constprop.108+0xc58/0xc70
__alloc_pages_nodemask+0x2d0/0x300
kmalloc_order+0x24/0xe0
kmalloc_order_trace+0x19/0x80
bnxt_alloc_mem+0x1150/0x15c0 [bnxt_en]
? bnxt_get_func_stat_ctxs+0x13/0x60 [bnxt_en]
__bnxt_open_nic+0x12e/0x780 [bnxt_en]
bnxt_open+0x10b/0x240 [bnxt_en]
__dev_open+0xe9/0x180
__dev_change_flags+0x1af/0x220
dev_change_flags+0x21/0x60
do_setlink+0x35c/0x1100
Instead of allocating this big chunk of memory and dividing it up for the
concurrent TPA instances, allocate each small chunk separately for each
TPA instance. This will reduce it to order-0 allocations.
Fixes: 79632e9ba3 ("bnxt_en: Expand bnxt_tpa_info struct to support 57500 chips.")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
