commit 5e4f99a6b7 upstream.
If the serial interface is used, the 8-bit address should be latched using
the rising edge of the WR/FSYNC signal.
This basically means that a CS change is required between the first byte
sent, and the second one.
This change splits the single-transfer transfer of 2 bytes into 2 transfers
with a single byte, and CS change in-between.
Note fixes tag is not accurate, but reflects a point beyond which there
are too many refactors to make backporting straight forward.
Fixes: b19e9ad5e2 ("staging:iio:resolver:ad2s1210 general driver cleanup.")
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b14c94908b ]
This reverts commit df5db5f9ee.
This patch fixes a regression: patch df5db5f9ee allowed function
run_queue() to bypass its call to do_xmote() if revokes were queued for
the glock. That's wrong because its call to do_xmote() is what is
responsible for calling the go_sync() glops functions to sync both
the ail list and any revokes queued for it. By bypassing the call,
gfs2 could get into a stand-off where the glock could not be demoted
until its revokes are written back, but the revokes would not be
written back because do_xmote() was never called.
It "sort of" works, however, because there are other mechanisms like
the log flush daemon (logd) that can sync the ail items and revokes,
if it deems it necessary. The problem is: without file system pressure,
it might never deem it necessary.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af73d78bd3 ]
When CONFIG_DEBUG_INFO is enabled, the two kallsyms linking steps spend
time collecting and writing the dwarf sections to the temporary output
files. kallsyms does not need this information, and leaving it off
halves their linking time. This is especially noticeable without
CONFIG_DEBUG_INFO_REDUCED. The BTF linking stage, however, does still
need those details.
Refactor the BTF and kallsyms generation stages slightly for more
regularized temporary names. Skip debug during kallsyms links.
Additionally move "info BTF" to the correct place since commit
8959e39272 ("kbuild: Parameterize kallsyms generation and correct
reporting"), which added "info LD ..." to vmlinux_link calls.
For a full debug info build with BTF, my link time goes from 1m06s to
0m54s, saving about 12 seconds, or 18%.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/202003031814.4AEA3351@keescook
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1608f3fa8 ]
For the case where the interpreter is compiled out or when the prog is jited
it is completely unnecessary to set the BPF insn pages as read-only. In fact,
on frequent churn of BPF programs, it could lead to performance degradation of
the system over time since it would break the direct map down to 4k pages when
calling set_memory_ro() for the insn buffer on x86-64 / arm64 and there is no
reverse operation. Thus, avoid breaking up large pages for data maps, and only
limit this to the module range used by the JIT where it is necessary to set
the image read-only and executable.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191129222911.3710-1-daniel@iogearbox.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8659a0e0ef ]
Several strange crashes have been eventually traced back to
STRICT_KERNEL_RWX and its interaction with code patching.
Various paths in our ftrace, kprobes and other patching code need to
be hardened against patching failures, otherwise we can end up running
with partially/incorrectly patched ftrace paths, kprobes or jump
labels, which can then cause strange crashes.
Although fixes for those are in development, they're not -rc material.
There also seem to be problems with the underlying strict RWX logic,
which needs further debugging.
So for now disable STRICT_KERNEL_RWX on 64-bit to prevent people from
enabling the option and tripping over the bugs.
Fixes: 1e0fc9d1eb ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520133605.972649-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f965b68188 upstream.
Init value of some display vregs rea inherited from host pregs. When
host display in different status, i.e. all monitors unpluged, different
display configurations, etc., GVT virtual display setup don't consistent
thus may lead to guest driver consider display goes malfunctional.
The added init vreg values are based on PRMs and fixed by calcuation
from current configuration (only PIPE_A) and the virtual EDID.
Fixes: 04d348ae3f ("drm/i915/gvt: vGPU display virtualization")
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200508060506.216250-1-colin.xu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7bd57fbc4a upstream.
I don't see what security concern is addressed by obfuscating NULL
and IS_ERR() error pointers, printed with %p/%pK. Given the number
of sites where %p is used (over 10000) and the fact that NULL pointers
aren't uncommon, it probably wouldn't take long for an attacker to
find the hash that corresponds to 0. Although harder, the same goes
for most common error values, such as -1, -2, -11, -14, etc.
The NULL part actually fixes a regression: NULL pointers weren't
obfuscated until commit 3e5903eb9c ("vsprintf: Prevent crash when
dereferencing invalid pointers") which went into 5.2. I'm tacking
the IS_ERR() part on here because error pointers won't leak kernel
addresses and printing them as pointers shouldn't be any different
from e.g. %d with PTR_ERR_OR_ZERO(). Obfuscating them just makes
debugging based on existing pr_debug and friends excruciating.
Note that the "always print 0's for %pK when kptr_restrict == 2"
behaviour which goes way back is left as is.
Example output with the patch applied:
ptr error-ptr NULL
%p: 0000000001f8cc5b fffffffffffffff2 0000000000000000
%pK, kptr = 0: 0000000001f8cc5b fffffffffffffff2 0000000000000000
%px: ffff888048c04020 fffffffffffffff2 0000000000000000
%pK, kptr = 1: ffff888048c04020 fffffffffffffff2 0000000000000000
%pK, kptr = 2: 0000000000000000 0000000000000000 0000000000000000
Fixes: 3e5903eb9c ("vsprintf: Prevent crash when dereferencing invalid pointers")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8f482deb0 upstream.
When the kernel is built with lockdep support and the owl-dma driver is
used, the following message is shown:
[ 2.496939] INFO: trying to register non-static key.
[ 2.501889] the code is fine but needs lockdep annotation.
[ 2.507357] turning off the locking correctness validator.
[ 2.512834] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.6.3+ #15
[ 2.519084] Hardware name: Generic DT based system
[ 2.523878] Workqueue: events_freezable mmc_rescan
[ 2.528681] [<801127f0>] (unwind_backtrace) from [<8010da58>] (show_stack+0x10/0x14)
[ 2.536420] [<8010da58>] (show_stack) from [<8080fbe8>] (dump_stack+0xb4/0xe0)
[ 2.543645] [<8080fbe8>] (dump_stack) from [<8017efa4>] (register_lock_class+0x6f0/0x718)
[ 2.551816] [<8017efa4>] (register_lock_class) from [<8017b7d0>] (__lock_acquire+0x78/0x25f0)
[ 2.560330] [<8017b7d0>] (__lock_acquire) from [<8017e5e4>] (lock_acquire+0xd8/0x1f4)
[ 2.568159] [<8017e5e4>] (lock_acquire) from [<80831fb0>] (_raw_spin_lock_irqsave+0x3c/0x50)
[ 2.576589] [<80831fb0>] (_raw_spin_lock_irqsave) from [<8051b5fc>] (owl_dma_issue_pending+0xbc/0x120)
[ 2.585884] [<8051b5fc>] (owl_dma_issue_pending) from [<80668cbc>] (owl_mmc_request+0x1b0/0x390)
[ 2.594655] [<80668cbc>] (owl_mmc_request) from [<80650ce0>] (mmc_start_request+0x94/0xbc)
[ 2.602906] [<80650ce0>] (mmc_start_request) from [<80650ec0>] (mmc_wait_for_req+0x64/0xd0)
[ 2.611245] [<80650ec0>] (mmc_wait_for_req) from [<8065aa10>] (mmc_app_send_scr+0x10c/0x144)
[ 2.619669] [<8065aa10>] (mmc_app_send_scr) from [<80659b3c>] (mmc_sd_setup_card+0x4c/0x318)
[ 2.628092] [<80659b3c>] (mmc_sd_setup_card) from [<80659f0c>] (mmc_sd_init_card+0x104/0x430)
[ 2.636601] [<80659f0c>] (mmc_sd_init_card) from [<8065a3e0>] (mmc_attach_sd+0xcc/0x16c)
[ 2.644678] [<8065a3e0>] (mmc_attach_sd) from [<8065301c>] (mmc_rescan+0x3ac/0x40c)
[ 2.652332] [<8065301c>] (mmc_rescan) from [<80143244>] (process_one_work+0x2d8/0x780)
[ 2.660239] [<80143244>] (process_one_work) from [<80143730>] (worker_thread+0x44/0x598)
[ 2.668323] [<80143730>] (worker_thread) from [<8014b5f8>] (kthread+0x148/0x150)
[ 2.675708] [<8014b5f8>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20)
[ 2.682912] Exception stack(0xee8fdfb0 to 0xee8fdff8)
[ 2.687954] dfa0: 00000000 00000000 00000000 00000000
[ 2.696118] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 2.704277] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
The obvious fix would be to use 'spin_lock_init()' on 'pchan->lock'
before attempting to call 'spin_lock_irqsave()' in 'owl_dma_get_pchan()'.
However, according to Manivannan Sadhasivam, 'pchan->lock' was supposed
to only protect 'pchan->vchan' while 'od->lock' does a similar job in
'owl_dma_terminate_pchan()'.
Therefore, this patch substitutes 'pchan->lock' with 'od->lock' and
removes the 'lock' attribute in 'owl_dma_pchan' struct.
Fixes: 47e20577c2 ("dmaengine: Add Actions Semi Owl family S900 DMA driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
Link: https://lore.kernel.org/r/c6e6cdaca252b5364bd294093673951036488cf0.1588439073.git.cristian.ciocaltea@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b41030fdc upstream.
In case of dmatest is built-in and no channel was configured test
doesn't run with:
dmatest: Could not start test, no channels configured
Even though description to "channel" parameter claims that default is
any.
Add default channel back as it used to be rather than reject test with
no channel configuration.
Fixes: d53513d5dc ("dmaengine: dmatest: Add support for multi channel testing)
Reported-by: Dijil Mohan <Dijil.Mohan@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Link: https://lore.kernel.org/r/20200429071522.58148-1-vladimir.murzin@arm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6b39f0707 upstream.
policy_update() invokes begin_current_label_crit_section(), which
returns a reference of the updated aa_label object to "label" with
increased refcount.
When policy_update() returns, "label" becomes invalid, so the refcount
should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
policy_update(). When aa_may_manage_policy() returns not NULL, the
refcnt increased by begin_current_label_crit_section() is not decreased,
causing a refcnt leak.
Fix this issue by jumping to "end_section" label when
aa_may_manage_policy() returns not NULL.
Fixes: 5ac8c355ae ("apparmor: allow introspecting the loaded policy pre internal transform")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0b845ffa0 upstream.
aa_change_profile() invokes aa_get_current_label(), which returns
a reference of the current task's label.
According to the comment of aa_get_current_label(), the returned
reference must be put with aa_put_label().
However, when the original object pointed by "label" becomes
unreachable because aa_change_profile() returns or a new object
is assigned to "label", reference count increased by
aa_get_current_label() is not decreased, causing a refcnt leak.
Fix this by calling aa_put_label() before aa_change_profile() return
and dropping unnecessary aa_get_current_label().
Fixes: 9fcf78cca1 ("apparmor: update domain transitions that are subsets of confinement at nnp")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c54d481d71 upstream.
In the implementation of aa_audit_rule_init(), when aa_label_parse()
fails the allocated memory for rule is released using
aa_audit_rule_free(). But after this release, the return statement
tries to access the label field of the rule which results in
use-after-free. Before releasing the rule, copy errNo and return it
after release.
Fixes: 52e8c38001 ("apparmor: Fix memory leak of rule on error exit path")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40b697e256 upstream.
The GC860 has one GPU device which has a 2d and 3d core. In this case
we want to expose perfmon information for both cores.
The driver has one array which contains all possible perfmon domains
with some meta data - doms_meta. Here we can see that for the GC860
two elements of that array are relevant:
doms_3d: is at index 0 in the doms_meta array with 8 perfmon domains
doms_2d: is at index 1 in the doms_meta array with 1 perfmon domain
The userspace driver wants to get a list of all perfmon domains and
their perfmon signals. This is done by iterating over all domains and
their signals. If the userspace driver wants to access the domain with
id 8 the kernel driver fails and returns invalid data from doms_3d with
and invalid offset.
This results in:
Unable to handle kernel paging request at virtual address 00000000
On such a device it is not possible to use the userspace driver at all.
The fix for this off-by-one error is quite simple.
Reported-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Fixes: ed1dd899ba ("drm/etnaviv: rework perfmon query infrastructure")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cf6022bd9 upstream.
Quoth the man page:
```
If the tracee was restarted by PTRACE_SYSCALL or PTRACE_SYSEMU, the
tracee enters syscall-enter-stop just prior to entering any system
call (which will not be executed if the restart was using
PTRACE_SYSEMU, regardless of any change made to registers at this
point or how the tracee is restarted after this stop).
```
The parenthetical comment is currently true on x86 and powerpc,
but not currently true on arm64. arm64 re-checks the _TIF_SYSCALL_EMU
flag after the syscall entry ptrace stop. However, at this point,
it reflects which method was used to re-start the syscall
at the entry stop, rather than the method that was used to reach it.
Fix that by recording the original flag before performing the ptrace
stop, bringing the behavior in line with documentation and x86/powerpc.
Fixes: f086f67485 ("arm64: ptrace: add support for syscall emulation")
Cc: <stable@vger.kernel.org> # 5.3.x-
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Bin Lu <Bin.Lu@arm.com>
[catalin.marinas@arm.com: moved 'flags' bit masking]
[catalin.marinas@arm.com: changed 'flags' type to unsigned long]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2e6b75f6e upstream.
Testing with Loopback I found that, after a Loopback LUN has executed a
TMR, I can no longer unlink the LUN. The rm command hangs in
transport_clear_lun_ref() at wait_for_completion(&lun->lun_shutdown_comp)
The reason is, that transport_lun_remove_cmd() is not called at the end of
target_tmr_work().
It seems, that in other fabrics this call happens implicitly when the
fabric drivers call transport_generic_free_cmd() during their
->queue_tm_rsp().
Unfortunately Loopback seems to not comply to the common way
of calling transport_generic_free_cmd() from ->queue_*().
Instead it calls transport_generic_free_cmd() from its
->check_stop_free() only.
But the ->check_stop_free() is called by
transport_cmd_check_stop_to_fabric() after it has reset the se_cmd->se_lun
pointer. Therefore the following transport_generic_free_cmd() skips the
transport_lun_remove_cmd().
So this patch re-adds the transport_lun_remove_cmd() at the end of
target_tmr_work(), which was removed during commit 2c9fa49e10 ("scsi:
target/core: Make ABORT and LUN RESET handling synchronous").
For fabrics using transport_generic_free_cmd() in the usual way the double
call to transport_lun_remove_cmd() doesn't harm, as
transport_lun_remove_cmd() checks for this situation and does not release
lun_ref twice.
Link: https://lore.kernel.org/r/20200513153443.3554-1-bstroesser@ts.fujitsu.com
Fixes: 2c9fa49e10 ("scsi: target/core: Make ABORT and LUN RESET handling synchronous")
Cc: stable@vger.kernel.org
Tested-by: Bryant G. Ly <bryangly@gmail.com>
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7513c5786 upstream.
There is a corner case that ALSA keeps increasing the hw_ptr but DMA
already stop working/updating the position for a long time.
In following log we can see the position returned from DMA driver does
not move at all but the hw_ptr got increased at some point of time so
snd_pcm_avail() will return a large number which seems to be a buffer
underrun event from user space program point of view. The program
thinks there is space in the buffer and fill more data.
[ 418.510086] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 4096 avail 12368
[ 418.510149] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 6910 avail 9554
...
[ 418.681052] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 15102 avail 1362
[ 418.681130] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
[ 418.726515] sound pcmC0D5p: pos 96 hw_ptr 16464 appl_ptr 16464 avail 16368
This is because the hw_base will be increased by runtime->buffer_size
frames unconditionally if the hw_ptr is not updated for over half of
buffer time. As the hw_base increases, so does the hw_ptr increased
by the same number.
The avail value returned from snd_pcm_avail() could exceed the limit
(buffer_size) easily becase the hw_ptr itself got increased by same
buffer_size samples when the corner case happens. In following log,
the buffer_size is 16368 samples but the avail is 21810 samples so
CRAS server complains about it.
[ 418.851755] sound pcmC0D5p: pos 96 hw_ptr 16464 appl_ptr 27390 avail 5442
[ 418.926491] sound pcmC0D5p: pos 96 hw_ptr 32832 appl_ptr 27390 avail 21810
cras_server[1907]: pcm_avail returned frames larger than buf_size:
sof-glkda7219max: :0,5: 21810 > 16368
By updating runtime->hw_ptr_jiffies each time the HWSYNC is called,
the hw_base will keep the same when buffer stall happens at long as
the interval between each HWSYNC call is shorter than half of buffer
time.
Following is a log captured by a patched kernel. The hw_base/hw_ptr
value is fixed in this corner case and user space program should be
aware of the buffer stall and handle it.
[ 293.525543] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 4096 avail 12368
[ 293.525606] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 6880 avail 9584
[ 293.525975] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 10976 avail 5488
[ 293.611178] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 15072 avail 1392
[ 293.696429] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
...
[ 381.139517] sound pcmC0D5p: pos 96 hw_ptr 96 appl_ptr 16464 avail 0
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1589776238-23877-1-git-send-email-brent.lu@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 37486135d3 upstream.
Though rdpkru and wrpkru are contingent upon CR4.PKE, the PKRU
resource isn't. It can be read with XSAVE and written with XRSTOR.
So, if we don't set the guest PKRU value here(kvm_load_guest_xsave_state),
the guest can read the host value.
In case of kvm_load_host_xsave_state, guest with CR4.PKE clear could
potentially use XRSTOR to change the host PKRU value.
While at it, move pkru state save/restore to common code and the
host_pkru field to kvm_vcpu_arch. This will let SVM support protection keys.
Cc: stable@vger.kernel.org
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <158932794619.44260.14508381096663848853.stgit@naples-babu.amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 431e76c3ed ]
HP Note Book supported new mute Led.
Hardware PIN was not enough to meet old LED rule.
JD2 to control playback mute led.
GPO3 to control capture mute led.
(ALC285 didn't control GPO3 via verb command)
This two PIN just could control by COEF registers.
[ corrected typos by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/6741211598ba499687362ff2aa30626b@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a462be52f ]
In the commit 8e85def572 ("ALSA: hda: enable regmap internal
locking"), we re-enabled the regmap lock due to the reported
regression that showed the possible concurrent accesses. It was a
temporary workaround, and there are still a few opened races even
after the revert. In this patch, we cover those still opened windows
with a proper mutex lock and disable the regmap internal lock again.
First off, the patch introduces a new snd_hdac_device.regmap_lock
mutex that is applied for each snd_hdac_regmap_*() call, including
read, write and update helpers. The mutex is applied carefully so
that it won't block the self-power-up procedure in the helper
function. Also, this assures the protection for the accesses without
regmap, too.
The snd_hdac_regmap_update_raw() is refactored to use the standard
regmap_update_bits_check() function instead of the open-code. The
non-regmap case is still open-coded but it's an easy part. The all
read and write operations are in the single mutex protection, so it's
now race-free.
In addition, a couple of new helper functions are added:
snd_hdac_regmap_update_raw_once() and snd_hdac_regmap_sync(). Both
are called from HD-audio legacy driver. The former is to initialize
the given verb bits but only once when it's not initialized yet. Due
to this condition, the function invokes regcache_cache_only(), and
it's now performed inside the regmap_lock (formerly it was racy) too.
The latter function is for simply invoking regcache_sync() inside the
regmap_lock, which is called from the codec resume call path.
Along with that, the HD-audio codec driver code is slightly modified /
simplified to adapt those new functions.
And finally, snd_hdac_regmap_read_raw(), *_write_raw(), etc are
rewritten with the helper macro. It's just for simplification because
the code logic is identical among all those functions.
Tested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200109090104.26073-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a71821f12 ]
GCC reports the following warning with W=1
sound/pci/hda/patch_realtek.c: In function ‘alc269_suspend’:
sound/pci/hda/patch_realtek.c:3616:29: warning: suggest braces around
empty body in an ‘if’ statement [-Wempty-body]
3616 | alc5505_dsp_suspend(codec);
| ^
sound/pci/hda/patch_realtek.c: In function ‘alc269_resume’:
sound/pci/hda/patch_realtek.c:3651:28: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
3651 | alc5505_dsp_resume(codec);
| ^
This is a classic macro problem and can indeed lead to bad program
flows.
Fix by using the usual "do { } while (0)" pattern
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200111214736.3002-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8101b5a153 ]
Stephen reported the following build warning on a ARM multi_v7_defconfig
build with GCC 9.2.1:
kernel/futex.c: In function 'do_futex':
kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized]
1676 | return oldval == cmparg;
| ~~~~~~~^~~~~~~~~
kernel/futex.c:1652:6: note: 'oldval' was declared here
1652 | int oldval, ret;
| ^~~~~~
introduced by commit a08971e948 ("futex: arch_futex_atomic_op_inuser()
calling conventions change").
While that change should not make any difference it confuses GCC which
fails to work out that oldval is not referenced when the return value is
not zero.
GCC fails to properly analyze arch_futex_atomic_op_inuser(). It's not the
early return, the issue is with the assembly macros. GCC fails to detect
that those either set 'ret' to 0 and set oldval or set 'ret' to -EFAULT
which makes oldval uninteresting. The store to the callsite supplied oldval
pointer is conditional on ret == 0.
The straight forward way to solve this is to make the store unconditional.
Aside of addressing the build warning this makes sense anyway because it
removes the conditional from the fastpath. In the error case the stored
value is uninteresting and the extra store does not matter at all.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87pncao2ph.fsf@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ffdaf9155 ]
I got this error when building kvm selftests:
/usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: multiple definition of `current_evmcs'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: first defined here
/usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: multiple definition of `current_vp_assist'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: first defined here
I think it's because evmcs.h is included both in a test file and a lib file so
the structs have multiple declarations when linking. After all it's not a good
habit to declare structs in the header files.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200504220607.99627-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6142dd511 ]
[why]
During hotplug, a DP port may be connected to the sink through
passive adapter which does not support DPCD reads. Issuing reads
without checking for this condition will result in errors
[how]
Ensure the link is in aux_mode before initiating operation that result
in a DPCD read.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3bd12da7f5 ]
asus-nb-wmi does not add any extra functionality on these Asus
Transformer books. They have detachable keyboards, so the hotkeys are
send through a HID device (and handled by the hid-asus driver) and also
the rfkill functionality is not used on these devices.
Besides not adding any extra functionality, initializing the WMI interface
on these devices actually has a negative side-effect. For some reason
the \_SB.ATKD.INIT() function which asus_wmi_platform_init() calls drives
GPO2 (INT33FC:02) pin 8, which is connected to the front facing webcam LED,
high and there is no (WMI or other) interface to drive this low again
causing the LED to be permanently on, even during suspend.
This commit adds a blacklist of DMI system_ids on which not to load the
asus-nb-wmi and adds these Transformer books to this list. This fixes
the webcam LED being permanently on under Linux.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac854131d9 ]
The syzbot fuzzer found a race between URB submission to endpoint 0
and device reset. Namely, during the reset we call usb_ep0_reinit()
because the characteristics of ep0 may have changed (if the reset
follows a firmware update, for example). While usb_ep0_reinit() is
running there is a brief period during which the pointers stored in
udev->ep_in[0] and udev->ep_out[0] are set to NULL, and if an URB is
submitted to ep0 during that period, usb_urb_ep_type_check() will
report it as a driver bug. In the absence of those pointers, the
routine thinks that the endpoint doesn't exist. The log message looks
like this:
------------[ cut here ]------------
usb 2-1: BOGUS urb xfer, pipe 2 != type 2
WARNING: CPU: 0 PID: 9241 at drivers/usb/core/urb.c:478
usb_submit_urb+0x1188/0x1460 drivers/usb/core/urb.c:478
Now, although submitting an URB while the device is being reset is a
questionable thing to do, it shouldn't count as a driver bug as severe
as submitting an URB for an endpoint that doesn't exist. Indeed,
endpoint 0 always exists, even while the device is in its unconfigured
state.
To prevent these misleading driver bug reports, this patch updates
usb_disable_endpoint() to avoid clearing the ep_in[] and ep_out[]
pointers when the endpoint being disabled is ep0. There's no danger
of leaving a stale pointer in place, because the usb_host_endpoint
structure being pointed to is stored permanently in udev->ep0; it
doesn't get deallocated until the entire usb_device structure does.
Reported-and-tested-by: syzbot+db339689b2101f6f6071@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2005011558590.903-100000@netrider.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f42234ffd5 ]
The paranoidal pointer check in IRQ handler looks very strange - it
really protects us only against bogus drivers which request IRQ line
with null pointer dev_id. However, the code fragment is incorrect
because the dev pointer is used before the actual check which leads
to undefined behavior. Remove the check to avoid confusing people
with incorrect code.
Signed-off-by: Maxim Petrov <mmrmaximuzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d8e28ff31 ]
If the ceph_mdsc_open_export_target_session() return fails, it will
do a "goto retry", but the session mutex has already been unlocked.
Re-lock the mutex in that case to ensure that we don't unlock it
twice.
Signed-off-by: Wu Bo <wubo40@huawei.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e189f2670 ]
Add a HID_QUIRK_NO_INIT_REPORTS quirk for the Dell K12A keyboard-dock,
which can be used with various Dell Venue 11 models.
Without this quirk the keyboard/touchpad combo works fine when connected
at boot, but when hotplugged 9 out of 10 times it will not work properly.
Adding the quirk fixes this.
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 846c68f7f1 ]
In drivers/net/gtp.c, gtp_genl_dump_pdp() should set NLM_F_MULTI
flag since it returns multipart message.
This patch adds a new arg "flags" in gtp_genl_fill_info() so that
flags can be set by the callers.
Signed-off-by: Yoshiyuki Kurauchi <ahochauwaaaaa@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c84cb3735f ]
Leon reported that the printk_once() in __setup_APIC_LVTT() triggers a
lockdep splat due to a lock order violation between hrtimer_base::lock and
console_sem, when the 'once' condition is reset via
/sys/kernel/debug/clear_warn_once after boot.
The initial printk cannot trigger this because that happens during boot
when the local APIC timer is set up on the boot CPU.
Prevent it by moving the printk to a place which is guaranteed to be only
called once during boot.
Mark the deadline timer check related functions and data __init while at
it.
Reported-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87y2qhoshi.fsf@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b730d66813 ]
Currently, ftracetest will return 1 (failure) if any unresolved cases
are encountered. The unresolved status results from modules and
programs not being available, and as such does not indicate any
issues with ftrace itself. As such, change the behaviour of
ftracetest in line with unsupported cases; if unsupported cases
happen, ftracetest still returns 0 unless --fail-unsupported. Here
--fail-unresolved is added and the default is to return 0 if
unresolved results occur.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9c6cea0b3 ]
During MTU change, the following events may happen.
Client-driven CRQ initialization fails due to partner’s CRQ closed,
causing client to enqueue a reset task for FATAL_ERROR. Then passive
(server-driven) CRQ initialization succeeds, causing client to
release CRQ and enqueue a reset task for failover. If the passive
CRQ initialization occurs before the FATAL reset task is processed,
the FATAL error reset task would try to access a CRQ message queue
that was freed, causing an oops. The problem may be most likely to
occur during DLPAR add vNIC with a non-default MTU, because the DLPAR
process will automatically issue a change MTU request.
Fix this by not processing fatal error reset if CRQ is passively
initialized after client-driven CRQ initialization fails.
Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
