commit 272970be3d upstream.
The driver shutdown callback (which sends EDL_SOC_RESET to the device
over serdev) should not be invoked when HCI device is not open (e.g. if
hci_dev_open_sync() failed), because the serdev and its TTY are not open
either. Also skip this step if device is powered off
(qca_power_shutdown()).
The shutdown callback causes use-after-free during system reboot with
Qualcomm Atheros Bluetooth:
Unable to handle kernel paging request at virtual address
0072662f67726fd7
...
CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G W
6.1.0-rt5-00325-g8a5f56bcfcca #8
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Call trace:
tty_driver_flush_buffer+0x4/0x30
serdev_device_write_flush+0x24/0x34
qca_serdev_shutdown+0x80/0x130 [hci_uart]
device_shutdown+0x15c/0x260
kernel_restart+0x48/0xac
KASAN report:
BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50
Read of size 8 at addr ffff16270c2e0018 by task systemd-shutdow/1
CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted
6.1.0-next-20221220-00014-gb85aaf97fb01-dirty #28
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Call trace:
dump_backtrace.part.0+0xdc/0xf0
show_stack+0x18/0x30
dump_stack_lvl+0x68/0x84
print_report+0x188/0x488
kasan_report+0xa4/0xf0
__asan_load8+0x80/0xac
tty_driver_flush_buffer+0x1c/0x50
ttyport_write_flush+0x34/0x44
serdev_device_write_flush+0x48/0x60
qca_serdev_shutdown+0x124/0x274
device_shutdown+0x1e8/0x350
kernel_restart+0x48/0xb0
__do_sys_reboot+0x244/0x2d0
__arm64_sys_reboot+0x54/0x70
invoke_syscall+0x60/0x190
el0_svc_common.constprop.0+0x7c/0x160
do_el0_svc+0x44/0xf0
el0_svc+0x2c/0x6c
el0t_64_sync_handler+0xbc/0x140
el0t_64_sync+0x190/0x194
Fixes: 7e7bbddd02 ("Bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a4d29b6d6 upstream.
Don't try to use HCI_OP_LE_READ_BUFFER_SIZE_V2 if controller don't
support ISO channels, but in order to check if ISO channels are
supported HCI_OP_LE_READ_LOCAL_FEATURES needs to be done earlier so the
features bits can be checked on hci_le_read_buffer_size_sync.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216817
Fixes: c1631dbc00 ("Bluetooth: hci_sync: Fix hci_read_buffer_size_sync")
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 634cf6ead9 ]
The dsi_irq_stats structure is a little too big to fit on the
stack of a 32-bit task, depending on the specific gcc options:
fbdev/omap2/omapfb/dss/dsi.c: In function 'dsi_dump_dsidev_irqs':
fbdev/omap2/omapfb/dss/dsi.c:1621:1: error: the frame size of 1064 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Since this is only a debugfs file, performance is not critical,
so just dynamically allocate it, and print an error message
in there in place of a failure code when the allocation fails.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 064e32dc5b ]
I do not read a strict requirement on /chosen node in either ePAPR or in
Documentation/devicetree. Help text for CONFIG_CMDLINE and
CONFIG_CMDLINE_EXTEND doesn't make their behavior explicitly dependent on
the presence of /chosen or the presense of /chosen/bootargs.
However the early check for /chosen and bailing out in
early_init_dt_scan_chosen() skips CONFIG_CMDLINE handling which is not
really related to /chosen node or the particular method of passing cmdline
from bootloader.
This leads to counterintuitive combinations (assuming
CONFIG_CMDLINE_EXTEND=y):
a) bootargs="foo", CONFIG_CMDLINE="bar" => cmdline=="foo bar"
b) /chosen missing, CONFIG_CMDLINE="bar" => cmdline==""
c) bootargs="", CONFIG_CMDLINE="bar" => cmdline==" bar"
Rework early_init_dt_scan_chosen() so that the cmdline config options are
always handled.
[commit msg written by Alexander Sverdlin]
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Tested-by: Geoff Levand <geoff@infradead.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20230103-dt-cmdline-fix-v1-2-7038e88b18b6@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3407267473 ]
Commit cf4694be2b ("tools: Add atomic_test_and_set_bit()") changed
tools/arch/x86/include/asm/atomic.h to include <asm/asm.h>, which causes
'make -C tools/testing/memblock' to fail with:
In file included from ../../include/asm/atomic.h:6,
from ../../include/linux/atomic.h:5,
from ./linux/mmzone.h:5,
from ../../include/linux/mm.h:5,
from ../../include/linux/pfn.h:5,
from ./linux/memory_hotplug.h:6,
from ./linux/init.h:7,
from ./linux/memblock.h:11,
from tests/common.h:8,
from tests/basic_api.h:5,
from main.c:2:
../../include/asm/../../arch/x86/include/asm/atomic.h:11:10: fatal error: asm/asm.h: No such file or directory
11 | #include <asm/asm.h>
| ^~~~~~~~~~~
Create a symlink to asm/asm.h in the same manner as the existing one to
asm/cmpxchg.h.
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/010101857c402765-96e2dbc6-b82b-47e2-a437-4834dbe0b96b-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 775e44d6d8 ]
Serialise access of TCP_Server_Info::hostname in
assemble_neg_contexts() by holding the server's mutex otherwise it
might end up accessing an already-freed hostname pointer from
cifs_reconnect() or cifs_resolve_server().
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39f501d68e ]
Currently we have a btrfs_debug() for run_one_delayed_ref() failure, but
if end users hit such problem, there will be no chance that
btrfs_debug() is enabled. This can lead to very little useful info for
debugging.
This patch will:
- Add extra info for error reporting
Including:
* logical bytenr
* num_bytes
* type
* action
* ref_mod
- Replace the btrfs_debug() with btrfs_err()
- Move the error reporting into run_one_delayed_ref()
This is to avoid use-after-free, the @node can be freed in the caller.
This error should only be triggered at most once.
As if run_one_delayed_ref() failed, we trigger the error message, then
causing the call chain to error out:
btrfs_run_delayed_refs()
`- btrfs_run_delayed_refs()
`- btrfs_run_delayed_refs_for_head()
`- run_one_delayed_ref()
And we will abort the current transaction in btrfs_run_delayed_refs().
If we have to run delayed refs for the abort transaction,
run_one_delayed_ref() will just cleanup the refs and do nothing, thus no
new error messages would be output.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56c5dab20a ]
Since gcc13, each member of an enum has the same type as the enum [1]. And
that is inherited from its members. Provided these two:
SRP_TAG_NO_REQ = ~0U,
SRP_TAG_TSK_MGMT = 1U << 31
all other members are unsigned ints.
Esp. with SRP_MAX_SGE and SRP_TSK_MGMT_SQ_SIZE and their use in min(),
this results in the following warnings:
include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast
drivers/infiniband/ulp/srp/ib_srp.c:563:42: note: in expansion of macro 'min'
include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast
drivers/infiniband/ulp/srp/ib_srp.c:2369:27: note: in expansion of macro 'min'
So move the large values away to a separate enum, so that they don't
affect other members.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36113
Link: https://lore.kernel.org/r/20221212120411.13750-1-jirislaby@kernel.org
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ff94f276f ]
Fix the system crash that happens when a task iterator travel through
vma of tasks.
In task iterators, we used to access mm by following the pointer on
the task_struct; however, the death of a task will clear the pointer,
even though we still hold the task_struct. That can cause an
unexpected crash for a null pointer when an iterator is visiting a
task that dies during the visit. Keeping a reference of mm on the
iterator ensures we always have a valid pointer to mm.
Co-developed-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Reported-by: Nathan Slingerland <slinger@meta.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221216221855.4122288-2-kuifeng@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb41c13c05 ]
When close device, if wol is enabled, rx will be enabled. When open
device it will cause rx packet to be dma to the wrong memory address
after pci_set_master() and system log will show blow messages.
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write] Request device [02:00.0] PASID ffffffff fault addr
ffdd4000 [fault reason 05] PTE Write access is not set
In this patch, driver disable tx/rx when close device. If wol is
enabled, only enable rx filter and disable rxdv_gate(if support) to
let hardware only receive packet to fifo but not to dma it.
Signed-off-by: Chunhao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad425666a1 ]
There is no functional change. Moving these two functions for following
patch "r8169: fix dmar pte write access is not set error".
Signed-off-by: Chunhao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9deb1e9fb8 ]
It's not very useful to copy back an empty ethtool_stats struct and
return 0 if we didn't actually have any stats. This also allows for
further simplification of this function in the future commits.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 937c783aa3 ]
Add a limit to 'config->vq_num' which is user controlled data which
comes from an vduse_ioctl to prevent large memory allocations.
Micheal says - This limit is somewhat arbitrary.
However, currently virtio pci and ccw are limited to a 16 bit vq number.
While MMIO isn't it is also isn't used with lots of VQs due to
current lack of support for per-vq interrupts.
Thus, the 0xffff limit on number of VQs corresponding
to a 16-bit VQ number seems sufficient for now.
This is found using static analysis with smatch.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Message-Id: <20221128155717.2579992-1-harshit.m.mogalapalli@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b66ead2d0e ]
Virtio_crypto use max_data_queues+1 to setup vqs,
we use vp_modern_get_num_queues to protect the vq range in setup_vq.
We could enter index >= vp_modern_get_num_queues(mdev) in setup_vq
if common->num_queues is not set well,and it return -ENOENT.
It is better to use -EINVAL instead.
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Message-Id: <20221101111655.1947-1-angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38fc462f57 ]
When qemu uses different address spaces for data and control virtqueues,
the current code would overwrite the control virtqueue iotlb through the
dup_iotlb call. Fix this by referring to the address space identifier
and the group to asid mapping to determine which mapping needs to be
updated. We also move the address space logic from mlx5 net to core
directory.
Reported-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20221114131759.57883-6-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0dbc1b4ae0 ]
event_handler runs under atomic context and may not acquire reslock. We
can still guarantee that the handler won't be called after suspend by
clearing nb_registered, unregistering the handler and flushing the
workqueue.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20221114131759.57883-5-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6b9d2fa00 ]
When there is a single DS no striping constraints need to be placed on
the IO. When such constraint is applied then buffered reads don't
coalesce to the DS's rsize.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f728a5ea27 ]
The init order and resulting error handling in dma_buf_export
was pretty messy.
Subordinate objects like the file and the sysfs kernel objects
were initializing and wiring itself up with the object in the
wrong order resulting not only in complicating and partially
incorrect error handling, but also in publishing only halve
initialized DMA-buf objects.
Clean this up thoughtfully by allocating the file independent
of the DMA-buf object. Then allocate and initialize the DMA-buf
object itself, before publishing it through sysfs. If everything
works as expected the file is then connected with the DMA-buf
object and publish it through debugfs.
Also adds the missing dma_resv_fini() into the error handling.
v2: add some missing changes to dma_bug_getfile() and a missing NULL
check in dma_buf_file_release()
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221209071535.933698-1-christian.koenig@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1d66e37973 upstream.
Some laptops have been reported to wake up from s2idle when plugging
in the AC adapter or by closing the lid. This is a surprising
behavior that is further clarified by commit cb3e7d624c ("PM:
wakeup: Add extra debugging statement for multiple active IRQs").
With that commit in place the following interaction can be seen
when the lid is closed:
[ 28.946038] PM: suspend-to-idle
[ 28.946083] ACPI: EC: ACPI EC GPE status set
[ 28.946101] ACPI: PM: Rearming ACPI SCI for wakeup
[ 28.950152] Timekeeping suspended for 3.320 seconds
[ 28.950152] PM: Triggering wakeup from IRQ 9
[ 28.950152] ACPI: EC: ACPI EC GPE status set
[ 28.950152] ACPI: EC: ACPI EC GPE dispatched
[ 28.995057] ACPI: EC: ACPI EC work flushed
[ 28.995075] ACPI: PM: Rearming ACPI SCI for wakeup
[ 28.995131] PM: Triggering wakeup from IRQ 9
[ 28.995271] ACPI: EC: ACPI EC GPE status set
[ 28.995291] ACPI: EC: ACPI EC GPE dispatched
[ 29.098556] ACPI: EC: ACPI EC work flushed
[ 29.207020] ACPI: EC: ACPI EC work flushed
[ 29.207037] ACPI: PM: Rearming ACPI SCI for wakeup
[ 29.211095] Timekeeping suspended for 0.739 seconds
[ 29.211095] PM: Triggering wakeup from IRQ 9
[ 29.211079] PM: Triggering wakeup from IRQ 7
[ 29.211095] ACPI: PM: ACPI non-EC GPE wakeup
[ 29.211095] PM: resume from suspend-to-idle
* IRQ9 on this laptop is used for the ACPI SCI.
* IRQ7 on this laptop is used for the GPIO controller.
What has occurred is when the lid was closed the EC woke up the
SoC from it's deepest sleep state and the kernel's s2idle loop
processed all EC events. When it was finished processing EC events,
it checked for any other reasons to wake (break the s2idle loop).
The IRQ for the GPIO controller was active so the loop broke, and
then this IRQ was processed. This is not a kernel bug but it is
certainly a surprising behavior, and to better debug it we should
have a dynamic debugging message that we can enact to catch it.
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221013134729.5592-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 613b14884b upstream.
This can't happen right now, but in preparation for allowing
bio_split_to_limits() returning NULL if it ended the bio, check for it
in all the callers.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6db6f9398 upstream.
We have two types of task_work based creation, one is using an existing
worker to setup a new one (eg when going to sleep and we have no free
workers), and the other is allocating a new worker. Only the latter
should be freed when we cancel task_work creation for a new worker.
Fixes: af82425c6a ("io_uring/io-wq: free worker if task_work creation is canceled")
Reported-by: syzbot+d56ec896af3637bdb7e4@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8a4f0467d upstream.
When booting with CONFIG_CFI_CLANG, there are numerous violations when
accessing the files under
/sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt/gt0:
$ cd /sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt/gt0
$ grep . *
id:0
punit_req_freq_mhz:350
rc6_enable:1
rc6_residency_ms:214934
rps_act_freq_mhz:1300
rps_boost_freq_mhz:1300
rps_cur_freq_mhz:350
rps_max_freq_mhz:1300
rps_min_freq_mhz:350
rps_RP0_freq_mhz:1300
rps_RP1_freq_mhz:350
rps_RPn_freq_mhz:350
throttle_reason_pl1:0
throttle_reason_pl2:0
throttle_reason_pl4:0
throttle_reason_prochot:0
throttle_reason_ratl:0
throttle_reason_status:0
throttle_reason_thermal:0
throttle_reason_vr_tdc:0
throttle_reason_vr_thermalert:0
$ sudo dmesg &| grep "CFI failure at"
[ 214.595903] CFI failure at kobj_attr_show+0x19/0x30 (target: id_show+0x0/0x70 [i915]; expected type: 0xc527b809)
[ 214.596064] CFI failure at kobj_attr_show+0x19/0x30 (target: punit_req_freq_mhz_show+0x0/0x40 [i915]; expected type: 0xc527b809)
[ 214.596407] CFI failure at kobj_attr_show+0x19/0x30 (target: rc6_enable_show+0x0/0x40 [i915]; expected type: 0xc527b809)
[ 214.596528] CFI failure at kobj_attr_show+0x19/0x30 (target: rc6_residency_ms_show+0x0/0x270 [i915]; expected type: 0xc527b809)
[ 214.596682] CFI failure at kobj_attr_show+0x19/0x30 (target: act_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.596792] CFI failure at kobj_attr_show+0x19/0x30 (target: boost_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.596893] CFI failure at kobj_attr_show+0x19/0x30 (target: cur_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.596996] CFI failure at kobj_attr_show+0x19/0x30 (target: max_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.597099] CFI failure at kobj_attr_show+0x19/0x30 (target: min_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.597198] CFI failure at kobj_attr_show+0x19/0x30 (target: RP0_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.597301] CFI failure at kobj_attr_show+0x19/0x30 (target: RP1_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.597405] CFI failure at kobj_attr_show+0x19/0x30 (target: RPn_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.597538] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.597701] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.597836] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.597952] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.598071] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.598177] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.598307] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.598439] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.598542] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
With kCFI, indirect calls are validated against their expected type
versus actual type and failures occur when the two types do not match.
The ultimate issue is that these sysfs functions are expecting to be
called via dev_attr_show() but they may also be called via
kobj_attr_show(), as certain files are created under two different
kobjects that have two different sysfs_ops in intel_gt_sysfs_register(),
hence the warnings above. When accessing the gt_ files under
/sys/devices/pci0000:00/0000:00:02.0/drm/card0, which are using the same
sysfs functions, there are no violations, meaning the functions are
being called with the proper type.
To make everything work properly, adjust certain functions to match the
type of the ->show() and ->store() members in 'struct kobj_attribute'.
Add a macro to generate functions for that can be called via both
dev_attr_{show,store}() or kobj_attr_{show,store}() so that they can be
called through both kobject locations without violating kCFI and adjust
the attribute groups to account for this.
Link: https://github.com/ClangBuiltLinux/linux/issues/1716
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013205909.1282545-1-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e5aedb932 upstream.
If we have multiple requests waiting on the same target poll waitqueue,
then it's quite possible to get a request triggered and get disappointed
in not being able to make any progress with it. If we race in doing so,
we'll potentially leave the poll request on the internal tables, but
removed from the waitqueue. That means that any subsequent trigger of
the poll waitqueue will not kick that request into action, causing an
application to potentially wait for completion of a request that will
never happen.
Fix this by adding a new poll return state, IOU_POLL_REISSUE. Rather
than have complicated logic for how to re-arm a given type of request,
just punt it for a reissue.
While in there, move the 'ret' variable to the only section where it
gets used. This avoids confusion the scope of it.
Cc: stable@vger.kernel.org
Fixes: eb0089d629 ("io_uring: single shot poll removal optimisation")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 544d163d65 upstream.
syzbot reports an issue with overflow filling for IOPOLL:
WARNING: CPU: 0 PID: 28 at io_uring/io_uring.c:734 io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734
CPU: 0 PID: 28 Comm: kworker/u4:1 Not tainted 6.2.0-rc3-syzkaller-16369-g358a161a6a9e #0
Workqueue: events_unbound io_ring_exit_work
Call trace:
io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734
io_req_cqe_overflow+0x5c/0x70 io_uring/io_uring.c:773
io_fill_cqe_req io_uring/io_uring.h:168 [inline]
io_do_iopoll+0x474/0x62c io_uring/rw.c:1065
io_iopoll_try_reap_events+0x6c/0x108 io_uring/io_uring.c:1513
io_uring_try_cancel_requests+0x13c/0x258 io_uring/io_uring.c:3056
io_ring_exit_work+0xec/0x390 io_uring/io_uring.c:2869
process_one_work+0x2d8/0x504 kernel/workqueue.c:2289
worker_thread+0x340/0x610 kernel/workqueue.c:2436
kthread+0x12c/0x158 kernel/kthread.c:376
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:863
There is no real problem for normal IOPOLL as flush is also called with
uring_lock taken, but it's getting more complicated for IOPOLL|SQPOLL,
for which __io_cqring_overflow_flush() happens from the CQ waiting path.
Reported-and-tested-by: syzbot+6805087452d72929404e@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 703c13fe3c ]
In cases where runtime services are not supported or have been disabled,
the runtime services workqueue will never have been allocated.
Do not try to destroy the workqueue unconditionally in the unlikely
event that EFI initialisation fails to avoid dereferencing a NULL
pointer.
Fixes: 98086df8b7 ("efi: add missed destroy_workqueue when efisubsys_init fails")
Cc: stable@vger.kernel.org
Cc: Li Heng <liheng40@huawei.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97f5e03a4a ]
Before the commit under Fixes the page would have been released
from the pool before the napi_alloc_skb() call, so normal page
freeing was fine (released page == no longer in the pool).
After the change we just mark the page for recycling so it's still
in the pool if the skb alloc fails, we need to recycle.
Same commit added the same bug in the new bnxt_rx_multi_page_skb().
Fixes: 1dc4c557bf ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Link: https://lore.kernel.org/r/20230111042547.987749-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
