All tasks can easily be frozen in under 10 ms, switch to using
an initial 1 ms sleep followed by exponential backoff until
8 ms. Also convert the printed time to ms instead of centiseconds.
Change-Id: I7b198b16eefb623c2b0fc45dce50d9bca320afdc
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We shouldn't try_to_freeze if locks are held. Holding a lock can cause a
deadlock if the lock is later acquired in the suspend or hibernate path
(e.g. by dpm). Holding a lock can also cause a deadlock in the case of
cgroup_freezer if a lock is held inside a frozen cgroup that is later
acquired by a process outside that group.
History:
This patch was originally applied as 6aa9707099 and reverted in
dbf520a9d7 because NFS was freezing with locks held. It was
deemed better to keep the bad freeze point in NFS to allow laptops
to suspend consistently. The previous patch in this series converts
NFS to call _unsafe versions of the freezable helpers so that
lockdep doesn't complain about them until a more correct fix
can be applied.
Change-Id: Ib9d4299fb75a39e611b868be42e413909a994baa
[akpm@linux-foundation.org: export debug_check_no_locks_held]
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The only existing caller to debug_check_no_locks_held calls it
with 'current' as the task, and the freezer needs to call
debug_check_no_locks_held but doesn't already have a current
task pointer, so remove the argument. It is already assuming
that the current task is relevant by dumping the current stack
trace as part of the warning.
This was originally part of 6aa9707099 (lockdep: check that
no locks held at freeze time) which was reverted in
dbf520a9d7.
Change-Id: Idbaf1332ce6c80dc49c1d31c324c7fbf210657c5
Original-author: Mandeep Singh Baines <msb@chromium.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CIFS calls wait_event_freezekillable_unsafe with a VFS lock held,
which is unsafe and will cause lockdep warnings when 6aa9707
"lockdep: check that no locks held at freeze time" is reapplied
(it was reverted in dbf520a). CIFS shouldn't be doing this, but
it has long-running syscalls that must hold a lock but also
shouldn't block suspend. Until CIFS freeze handling is rewritten
to use a signal to exit out of the critical section, add a new
wait_event_freezekillable_unsafe helper that will not run the
lockdep test when 6aa9707 is reapplied, and call it from CIFS.
In practice the likley result of holding the lock while freezing
is that a second task blocked on the lock will never freeze,
aborting suspend, but it is possible to manufacture a case using
the cgroup freezer, the lock, and the suspend freezer to create
a deadlock. Silencing the lockdep warning here will allow
problems to be found in other drivers that may have a more
serious deadlock risk, and prevent new problems from being added.
Change-Id: I420c5392bacf68e58e268293b2b36068ad4df753
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
NFS calls the freezable helpers with locks held, which is unsafe
and will cause lockdep warnings when 6aa9707 "lockdep: check
that no locks held at freeze time" is reapplied (it was reverted
in dbf520a). NFS shouldn't be doing this, but it has
long-running syscalls that must hold a lock but also shouldn't
block suspend. Until NFS freeze handling is rewritten to use a
signal to exit out of the critical section, add new *_unsafe
versions of the helpers that will not run the lockdep test when
6aa9707 is reapplied, and call them from NFS.
In practice the likley result of holding the lock while freezing
is that a second task blocked on the lock will never freeze,
aborting suspend, but it is possible to manufacture a case using
the cgroup freezer, the lock, and the suspend freezer to create
a deadlock. Silencing the lockdep warning here will allow
problems to be found in other drivers that may have a more
serious deadlock risk, and prevent new problems from being added.
Change-Id: Ia17d32cdd013a6517bdd5759da900970a4427170
Signed-off-by: Colin Cross <ccross@android.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add support for clocks CLOCK_REALTIME_ALARM and CLOCK_BOOTTIME_ALARM.
Change-Id: Iafc8445d3d7ffb35110c860f1607bf03f1edb895
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Similar to hrtimer_expires_remaining, return the amount of time
remaining until alarm expiry.
Change-Id: I8c57512d619ac66bcdaf2d9ccdf0d7f74af2ff66
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Start an alarmtimer with an expires time relative to the current time
of the associated clock.
Change-Id: Ifb5309a15e0d502bb4d0209ca5510a56ee7fa88c
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Similar to hrtimer_forward_now, move the expires time forward to an
interval from the current time of the associated clock.
Change-Id: I73fed223321167507b6eddcb7a57d235ffcfc1be
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Analogous to hrtimer_restart, restart an alarmtimer after the expires
time has already been updated (as with alarm_forward).
Change-Id: Ia2613bbb467404cb2c35c11efa772bc56294963a
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Check for idle time delta less than elapsed time delta, avoid
underflow computing active time.
Change-Id: I3e4c6ef1ad794eec49ed379c0c50fa727fd6ad28
Signed-off-by: Minsung Kim <ms925.kim@samsung.com>
Reschedule load sampling timer after timestamp of sample start taken,
hold spinlock across entire sequence to avoid preemption. Avoid the
WARN for zero time delta in the load sampling timer function.
Change-Id: Idc10a756f09141decb6df92669521a1ebf0dbc10
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Add checks for error return from cpufreq_frequency_table_target, and be
less noisy on the existing call with an error check. CPU hotplug and
system shutdown may cause this call to return -EINVAL.
Bug: 8613560
Change-Id: Id78d8829920462c0db1c7e14e717d91740d6cb44
Signed-off-by: Todd Poynor <toddpoynor@google.com>
We don't like CONFIG_MODULES anymore.
Connection tracker handling of large SIP fails.
Change-Id: Ie3c65aefcc6181752d6656c97e63035e5b5653ff
Signed-off-by: JP Abgrall <jpa@google.com>
Because there is not tool to consistently generate these config
fragments, lets keep the alphabetical instead of random.
Change-Id: I0f098f6be6bdd272544295a3d5a48d04411e4514
Signed-off-by: JP Abgrall <jpa@google.com>
Avoid holding ashmem_mutex across code that can page fault. Page faults
grab the mmap_sem for the process, which are also held by mmap calls
prior to calling ashmem_mmap, which locks ashmem_mutex. The reversed
order of locking between the two can deadlock.
The calls that can page fault are read() and the ASHMEM_SET_NAME and
ASHMEM_GET_NAME ioctls. Move the code that accesses userspace pages
outside the ashmem_mutex.
Bug: 9261835
Change-Id: If1322e981d29c889a56cdc9dfcbc6df2729a45e9
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Conflicts:
drivers/staging/android/ashmem.c
This will be a noop unless the KSM thread is enabled by userspace
Change-Id: Ia5fde14504cc0da50522e2f875d8d021f9e054ba
Signed-off-by: Rom Lemarchand <romlem@google.com>
When the system is low on memory, we want to shrink any cached
system memory ion is holding. Previously we were shrinking memory
in the page pools, but not in the deferred free list. This patch
makes it possible to shrink both. It also moves the shrinker
code into the heaps so they can correctly manage any caches they
might contain.
Change-Id: I177f587f999a5220eddbf7af94745aae736cac75
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Add tracepoints to record the start and end of each mmc block
operation. This includes read, write, erase, secure erase,
trim, secure trim1 and secure trim 2, discard and
sanitize commands.
Change-Id: Ic5d1cbdb9adb940d8b1a2a13c73970023575df50
Signed-off-by: Ken Sumrall <ksumrall@android.com>
lowmemorykiller debug messages are inscrutable and mostly useful
for debugging the lowmemorykiller, not explaining why a process
was killed. Make the messages more useful by prefixing them
with "lowmemorykiller: " and explaining in more readable terms
what was killed, who it was killed for, and why it was killed.
The messages now look like:
[ 76.997631] lowmemorykiller: Killing 'droid.gallery3d' (2172), adj 1000,
[ 76.997635] to free 27436kB on behalf of 'kswapd0' (29) because
[ 76.997638] cache 122624kB is below limit 122880kB for oom_score_adj 1000
[ 76.997641] Free memory is -53356kB above reserved
A negative number for free memory above reserved means some of the
reserved memory has been used and is being regenerated by kswapd,
which is likely what called the shrinkers.
Change-Id: I1fe983381e73e124b90aa5d91cb66e55eaca390f
Signed-off-by: Colin Cross <ccross@android.com>
- Add 2 files that contain the minimal and recommended kernel config
options respectively.
- Add a README to explain their purpose and how to use them to
generate a device config compatible with Android.
Change-Id: I3a4883f3b04d2820e90ceb3c4d02390d6458d6ce
Signed-off-by: Rom Lemarchand <romlem@google.com>
The high variable was sometimes used uninitialized
Change-Id: I2f51413fd2d063fdff325047e824dc8c749d9e0a
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
This change fixes the how the gpu_sched_switch timestamp field is formatted.
Signed-off-by: Jamie Gennis <jgennis@google.com>
Change-Id: I273234935254ed15772c9e561c9af20e480004ae
Allow CONFIG_BUILD_ARM_APPENDED_DTB_IMAGE_NAMES to specify
a space separated list of dtbs to append to the zImage,
and name the resulting file zImage-dtb
Change-Id: I36d9108a2349bdbb373e95076dcb1417d8c7dce6
Signed-off-by: Colin Cross <ccross@android.com>
Conflicts:
arch/arm/boot/Makefile
scripts/Makefile.lib
Allocations from the ion heap need to be zeroed to protect userspace
from seeing memory belonging to other processes. First allocations
from this heap were not zero'd allowing users to see memory from other
processes on a warm reset.
Change-Id: I524a7b79cb76c390c870fcf8b30d213185fc85a0
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
Some of the printks are in the packet handling path.
We now ratelimit the very unlikely errors to avoid
kmsg spamming.
Signed-off-by: JP Abgrall <jpa@google.com>
Time to wait should be based on the intended target speed, not the
actual speed (which may be held high by another CPU).
Change-Id: Ifc5bb55d06adddb9a02af90af05398a78f282272
Reported-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Allows a defconfig to set a default dtb to concatenate with a zImage
to create a zImage-dtb.<dtb name>
Signed-off-by: Erik Gilling <konkers@android.com>
Change-Id: I34b643b1c49228fbae88a56e46c93c478089620d
Previously the idle time returned from get_cpu_idle_time_us included the
iowait time. So the iowait time was always calculated as idle time.
But now the idle time returned from get_cpu_idle_time_us does not include
the iowait time anymore because of below commit which cause the iowait time
always calculated as busy time:
6beea0c nohz: Fix update_ts_time_stat idle accounting
Add the io_is_busy interface, as does the ondemand governor, and let the user
configure the iowait time as busy or idle through the io_is_busy sysfs
interface.
By default, io_is_busy is disabled.
[toddpoynor@google.com: minor updates]
Change-Id: If7d70ff864c43bc9c8d7fd7cfc66f930d339f9b4
Signed-off-by: Lianwei Wang <lian-wei.wang@motorola.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Accept a string of delays and speeds at which to apply the delay before
raising each step above hispeed. For example, "80000 1300000:200000
1500000:40000" means that the delay at or above 1GHz, until 1.3GHz is 80 msecs,
the delay until 1.5GHz is 200 msecs and the delay at or above 1.5GHz is 40
msecs when hispeed_freq is 1GHz.
[toddpoynor@google.com: add documentation]
Change-Id: Ifeebede8b1acbdd0a53e5c6916bccbf764dc854f
Signed-off-by: Minsung Kim <ms925.kim@samsung.com>
Add the 'funcgraph-flat' option to the function_graph tracer to use the default
trace printing format rather than the hierarchical formatting normally used.
Change-Id: If2900bfb86e6f8f51379f56da4f6fabafa630909
Signed-off-by: Jamie Gennis <jgennis@google.com>
Add the ability for a heap to free buffers asynchrounously. Freed buffers
are placed on a free list and freed from a low priority background thread.
If allocations from a particular heap fail, the free list is drained. This
patch also enable asynchronous frees from the chunk heap.
Change-Id: Idfdbc8608b6cbd9e27d2e31ea4fd84fea9f69f7d
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
The tgids are tracked along side the saved_cmdlines tracking, and can be
included in trace output by enabling the 'print-tgid' trace option. This is
useful when doing post-processing of the trace data, as it allows events to be
grouped by tgid.
Change-Id: I52ed04c3a8ca7fddbb868b792ce5d21ceb76250e
Signed-off-by: Jamie Gennis <jgennis@google.com>
Add security hooks to the binder and implement the hooks for SELinux.
The security hooks enable security modules such as SELinux to implement
controls over binder IPC. The security hooks include support for
controlling what process can become the binder context manager
(binder_set_context_mgr), controlling the ability of a process
to invoke a binder transaction/IPC to another process (binder_transaction),
controlling the ability a process to transfer a binder reference to
another process (binder_transfer_binder), and controlling the ability
of a process to transfer an open file to another process (binder_transfer_file).
This support is used by SE Android, http://selinuxproject.org/page/SEAndroid.
Change-Id: I9a64a87825df2e60b9c51400377af4a9cd1c4049
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Currently ion can only share buffers with dma buf fd's. Fd's can not be
used inside the kernel as they are process specific so support for
sharing buffers with dma buf kernel handles is needed to support kernel
only use cases. An example use case could be a GPU driver using ion
that wants to share its output buffers with a 3d party display
controller driver supporting dma buf.
Change-Id: If1b3753ddbd5b44c5a3e622055d5473e16fc1c48
Signed-off-by: Johan Mossberg <johan.mossberg@stericsson.com>
Removed bluetooth checks for AID_NET_BT and AID_NET_BT_ADMIN
which are not useful anymore.
This is in preparation for getting rid of all the AID_* gids.
Signed-off-by: JP Abgrall <jpa@google.com>
Ensure userspace reads an up-to-date value for charging status whenever the
charge source is updated. Avoid races where stale charging state may be
reflected in userspace until the next battery state poll.
Change-Id: Ia744db48584e9e9abf442710c279af9e3a25c079
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Should no longer need to fix up AC/USB online state via these.
Change-Id: I48d2ef0fbefee58cb47eafc11d9a44759920df7a
Signed-off-by: Todd Poynor <toddpoynor@google.com>
In the past it would always ignore interfaces with loopback addresses.
Now we just treat them like any other.
This also helps with writing tests that check for the presence
of the qtaguid module.
Signed-off-by: JP Abgrall <jpa@google.com>
In the past the iface_stat_fmt would only show global bytes/packets
for the skb-based numbers.
For stall detection in userspace, distinguishing tcp vs other protocols
makes it easier.
Now we report
ifname total_skb_rx_bytes total_skb_rx_packets total_skb_tx_bytes
total_skb_tx_packets {rx,tx}_{tcp,udp,ohter}_{bytes,packets}
Bug: 6818637
Signed-off-by: JP Abgrall <jpa@google.com>
Refactor the code in the system heap used to map and zero the buffers
into a seperate utility so it can be called from other heaps. Use it from
the chunk heap.
Change-Id: I706341ae42b80bc4aae8a8614b4f73435bbf05d9
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
