[ Upstream commit af295892a7abbf05a3c2ba7abc4d81bb448623d6 ]
Function __sctp_write_space() doesn't set poll key, which leads to
ep_poll_callback() waking up all waiters, not only these waiting
for the socket being writable. Set the key properly using
wake_up_interruptible_poll(), which is preferred over the sync
variant, as writers are not woken up before at least half of the
queue is available. Also, TCP does the same.
Signed-off-by: Petr Malat <oss@malat.biz>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250516081727.1361451-1-oss@malat.biz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edb888d29748cee674006a52e544925dacc7728e ]
Logic here always sets hdr->version to 2 if it is not a BE3 or Lancer chip,
even if it is BE2. Use 'else if' to prevent multiple assignments, setting
version 0 for BE2, version 1 for BE3 and Lancer, and version 2 for others.
Fixes potential incorrect version setting when BE2_chip and
BE3_chip/lancer_chip checks could both be true.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250519141731.691136-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fe2b969d911a09abcd6a47401a3c66c38a310e6 ]
Replaced pm_runtime_put() with pm_runtime_put_sync_suspend() to ensure
the runtime suspend is invoked immediately when unregistering a slave.
This prevents a race condition where suspend was skipped when
unregistering and registering slave in quick succession.
For example, consider the rapid sequence of
`delete_device -> new_device -> delete_device -> new_device`.
In this sequence, it is observed that the dw_i2c_plat_runtime_suspend()
might not be invoked after `delete_device` operation.
This is because after `delete_device` operation, when the
pm_runtime_put() is about to trigger suspend, the following `new_device`
operation might race and cancel the suspend.
If that happens, during the `new_device` operation,
dw_i2c_plat_runtime_resume() is skipped (since there was no suspend), which
means `i_dev->init()`, i.e. i2c_dw_init_slave(), is skipped.
Since i2c_dw_init_slave() is skipped, i2c_dw_configure_fifo_slave() is
skipped too, which leaves `DW_IC_INTR_MASK` unconfigured. If we inspect
the interrupt mask register using devmem, it will show as zero.
Example shell script to reproduce the issue:
```
#!/bin/sh
SLAVE_LADDR=0x1010
SLAVE_BUS=13
NEW_DEVICE=/sys/bus/i2c/devices/i2c-$SLAVE_BUS/new_device
DELETE_DEVICE=/sys/bus/i2c/devices/i2c-$SLAVE_BUS/delete_device
# Create initial device
echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
sleep 2
# Rapid sequence of
# delete_device -> new_device -> delete_device -> new_device
echo $SLAVE_LADDR > $DELETE_DEVICE
echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
echo $SLAVE_LADDR > $DELETE_DEVICE
echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
# Using devmem to inspect IC_INTR_MASK will show as zero
```
Signed-off-by: Tan En De <ende.tan@starfivetech.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20250412023303.378600-1-ende.tan@starfivetech.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70dd07c888451503c3e93b6821e10d1ea1ec9930 ]
.init_{,de}compress_ctx uses kvmalloc() to alloc memory, it will try
to allocate physically continuous page first, it may cause more memory
allocation pressure, let's use vmalloc instead to mitigate it.
[Test]
cd /data/local/tmp
touch file
f2fs_io setflags compression file
f2fs_io getflags file
for i in $(seq 1 10); do sync; echo 3 > /proc/sys/vm/drop_caches;\
time f2fs_io write 512 0 4096 zero osync file; truncate -s 0 file;\
done
[Result]
Before After Delta
21.243 21.694 -2.12%
For compression, we recommend to use ioctl to compress file data in
background for workaround.
For decompression, only zstd will be affected.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8ef20fe7274c5766a317f9193b70bed717b6b3d ]
The tipc_aead_free() function currently uses kfree() to release the aead
structure. However, this structure contains sensitive information, such
as key's SALT value, which should be securely erased from memory to
prevent potential leakage.
To enhance security, replace kfree() with kfree_sensitive() when freeing
the aead structure. This change ensures that sensitive data is explicitly
cleared before memory deallocation, aligning with the approach used in
tipc_aead_init() and adhering to best practices for handling confidential
information.
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250523114717.4021518-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 234f71555019d308c6bc6f98c78c5551cb8cd56a ]
The ACPI specification requires that battery rate is always positive,
but the kernel ABI for POWER_SUPPLY_PROP_CURRENT_NOW
(Documentation/ABI/testing/sysfs-class-power) specifies that it should
be negative when a battery is discharging. When reporting CURRENT_NOW,
massage the value to match the documented ABI.
This only changes the sign of `current_now` and not `power_now` because
documentation doesn't describe any particular meaning for `power_now` so
leaving `power_now` unchanged is less likely to confuse userspace
unnecessarily, whereas becoming consistent with the documented ABI is
worth potentially confusing clients that read `current_now`.
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Link: https://patch.msgid.link/20250508024146.1436129-1-pmarheine@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40d3b40dce375d6f1c1dbf08d79eed3aed6c691d ]
pm_runtime_put_autosuspend() schedules a hrtimer to expire
at "dev->power.timer_expires". If the hrtimer's callback,
pm_suspend_timer_fn(), observes that the current time equals
"dev->power.timer_expires", it unexpectedly bails out instead of
proceeding with runtime suspend.
pm_suspend_timer_fn():
if (expires > 0 && expires < ktime_get_mono_fast_ns()) {
dev->power.timer_expires = 0;
rpm_suspend(..)
}
Additionally, as ->timer_expires is not cleared, all the future auto
suspend requests will not schedule hrtimer to perform auto suspend.
rpm_suspend():
if ((rpmflags & RPM_AUTO) &&...) {
if (!(dev->power.timer_expires && ...) { <-- this will fail.
hrtimer_start_range_ns(&dev->power.suspend_timer,...);
}
}
Fix this by as well checking if current time reaches the set expiration.
Co-developed-by: Patrick Daly <quic_pdaly@quicinc.com>
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Link: https://patch.msgid.link/20250515064125.1211561-1-quic_charante@quicinc.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f16d9fb6cf03fdbdefa41a8b32ba1e57afb7ae3d ]
Multiple applications may access the battery gauge at the same time, so
the gauge may be busy and EBUSY will be returned. The driver will set a
flag to record the EBUSY state, and this flag will be kept until the next
periodic update. When this flag is set, bq27xxx_battery_get_property()
will just return ENODEV until the flag is updated.
Even if the gauge was busy during the last accessing attempt, returning
ENODEV is not ideal, and can cause confusion in the applications layer.
Instead, retry accessing the I2C to update the flag is as expected, for
the gauge typically recovers from busy state within a few milliseconds.
If still failed to access the gauge, the real error code would be returned
instead of ENODEV (as suggested by Pali Rohár).
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jerry Lv <Jerry.Lv@axis.com>
Link: https://lore.kernel.org/r/20250415-foo-fix-v2-1-5b45a395e4cc@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bed18f0bdcd6737a938264a59d67923688696fc4 ]
ACPICA commit 8829e70e1360c81e7a5a901b5d4f48330e021ea5
I'm Seunghun Han, and I work for National Security Research Institute of
South Korea.
I have been doing a research on ACPI and found an ACPI cache leak in ACPI
early abort cases.
Boot log of ACPI cache leak is as follows:
[ 0.352414] ACPI: Added _OSI(Module Device)
[ 0.353182] ACPI: Added _OSI(Processor Device)
[ 0.353182] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.353182] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.356028] ACPI: Unable to start the ACPI Interpreter
[ 0.356799] ACPI Error: Could not remove SCI handler (20170303/evmisc-281)
[ 0.360215] kmem_cache_destroy Acpi-State: Slab cache still has objects
[ 0.360648] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W
4.12.0-rc4-next-20170608+ #10
[ 0.361273] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS
virtual_box 12/01/2006
[ 0.361873] Call Trace:
[ 0.362243] ? dump_stack+0x5c/0x81
[ 0.362591] ? kmem_cache_destroy+0x1aa/0x1c0
[ 0.362944] ? acpi_sleep_proc_init+0x27/0x27
[ 0.363296] ? acpi_os_delete_cache+0xa/0x10
[ 0.363646] ? acpi_ut_delete_caches+0x6d/0x7b
[ 0.364000] ? acpi_terminate+0xa/0x14
[ 0.364000] ? acpi_init+0x2af/0x34f
[ 0.364000] ? __class_create+0x4c/0x80
[ 0.364000] ? video_setup+0x7f/0x7f
[ 0.364000] ? acpi_sleep_proc_init+0x27/0x27
[ 0.364000] ? do_one_initcall+0x4e/0x1a0
[ 0.364000] ? kernel_init_freeable+0x189/0x20a
[ 0.364000] ? rest_init+0xc0/0xc0
[ 0.364000] ? kernel_init+0xa/0x100
[ 0.364000] ? ret_from_fork+0x25/0x30
I analyzed this memory leak in detail. I found that “Acpi-State” cache and
“Acpi-Parse” cache were merged because the size of cache objects was same
slab cache size.
I finally found “Acpi-Parse” cache and “Acpi-parse_ext” cache were leaked
using SLAB_NEVER_MERGE flag in kmem_cache_create() function.
Real ACPI cache leak point is as follows:
[ 0.360101] ACPI: Added _OSI(Module Device)
[ 0.360101] ACPI: Added _OSI(Processor Device)
[ 0.360101] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.361043] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.364016] ACPI: Unable to start the ACPI Interpreter
[ 0.365061] ACPI Error: Could not remove SCI handler (20170303/evmisc-281)
[ 0.368174] kmem_cache_destroy Acpi-Parse: Slab cache still has objects
[ 0.369332] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W
4.12.0-rc4-next-20170608+ #8
[ 0.371256] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS
virtual_box 12/01/2006
[ 0.372000] Call Trace:
[ 0.372000] ? dump_stack+0x5c/0x81
[ 0.372000] ? kmem_cache_destroy+0x1aa/0x1c0
[ 0.372000] ? acpi_sleep_proc_init+0x27/0x27
[ 0.372000] ? acpi_os_delete_cache+0xa/0x10
[ 0.372000] ? acpi_ut_delete_caches+0x56/0x7b
[ 0.372000] ? acpi_terminate+0xa/0x14
[ 0.372000] ? acpi_init+0x2af/0x34f
[ 0.372000] ? __class_create+0x4c/0x80
[ 0.372000] ? video_setup+0x7f/0x7f
[ 0.372000] ? acpi_sleep_proc_init+0x27/0x27
[ 0.372000] ? do_one_initcall+0x4e/0x1a0
[ 0.372000] ? kernel_init_freeable+0x189/0x20a
[ 0.372000] ? rest_init+0xc0/0xc0
[ 0.372000] ? kernel_init+0xa/0x100
[ 0.372000] ? ret_from_fork+0x25/0x30
[ 0.388039] kmem_cache_destroy Acpi-parse_ext: Slab cache still has objects
[ 0.389063] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W
4.12.0-rc4-next-20170608+ #8
[ 0.390557] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS
virtual_box 12/01/2006
[ 0.392000] Call Trace:
[ 0.392000] ? dump_stack+0x5c/0x81
[ 0.392000] ? kmem_cache_destroy+0x1aa/0x1c0
[ 0.392000] ? acpi_sleep_proc_init+0x27/0x27
[ 0.392000] ? acpi_os_delete_cache+0xa/0x10
[ 0.392000] ? acpi_ut_delete_caches+0x6d/0x7b
[ 0.392000] ? acpi_terminate+0xa/0x14
[ 0.392000] ? acpi_init+0x2af/0x34f
[ 0.392000] ? __class_create+0x4c/0x80
[ 0.392000] ? video_setup+0x7f/0x7f
[ 0.392000] ? acpi_sleep_proc_init+0x27/0x27
[ 0.392000] ? do_one_initcall+0x4e/0x1a0
[ 0.392000] ? kernel_init_freeable+0x189/0x20a
[ 0.392000] ? rest_init+0xc0/0xc0
[ 0.392000] ? kernel_init+0xa/0x100
[ 0.392000] ? ret_from_fork+0x25/0x30
When early abort is occurred due to invalid ACPI information, Linux kernel
terminates ACPI by calling acpi_terminate() function. The function calls
acpi_ut_delete_caches() function to delete local caches (acpi_gbl_namespace_
cache, state_cache, operand_cache, ps_node_cache, ps_node_ext_cache).
But the deletion codes in acpi_ut_delete_caches() function only delete
slab caches using kmem_cache_destroy() function, therefore the cache
objects should be flushed before acpi_ut_delete_caches() function.
"Acpi-Parse" cache and "Acpi-ParseExt" cache are used in an AML parse
function, acpi_ps_parse_loop(). The function should complete all ops
using acpi_ps_complete_final_op() when an error occurs due to invalid
AML codes.
However, the current implementation of acpi_ps_complete_final_op() does not
complete all ops when it meets some errors and this cause cache leak.
This cache leak has a security threat because an old kernel (<= 4.9) shows
memory locations of kernel functions in stack dump. Some malicious users
could use this information to neutralize kernel ASLR.
To fix ACPI cache leak for enhancing security, I made a patch to complete all
ops unconditionally for acpi_ps_complete_final_op() function.
I hope that this patch improves the security of Linux kernel.
Thank you.
Link: https://github.com/acpica/acpica/commit/8829e70e
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2363774.ElGaqSPkdT@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f529c91be8a34ac12e7599bf87c65b6f4a2c9f5c ]
The ISENSE/VSENSE blocks are only powered up when the amplifier
transitions from shutdown to active. This means that if those controls
are flipped on while the amplifier is already playing back audio, they
will have no effect.
Fix this by forcing a power cycle around transitions in those controls.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250406-apple-codec-changes-v5-1-50a00ec850a3@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08d7becc1a6b8c936e25d827becabfe3bff72a36 ]
Right now, if the clocksource watchdog detects a clocksource skew, it might
perform a per CPU check, for example in the TSC case on x86. In other
words: supposing TSC is detected as unstable by the clocksource watchdog
running at CPU1, as part of marking TSC unstable the kernel will also run a
check of TSC readings on some CPUs to be sure it is synced between them
all.
But that check happens only on some CPUs, not all of them; this choice is
based on the parameter "verify_n_cpus" and in some random cpumask
calculation. So, the watchdog runs such per CPU checks on up to
"verify_n_cpus" random CPUs among all online CPUs, with the risk of
repeating CPUs (that aren't double checked) in the cpumask random
calculation.
But if "verify_n_cpus" > num_online_cpus(), it should skip the random
calculation and just go ahead and check the clocksource sync between
all online CPUs, without the risk of skipping some CPUs due to
duplicity in the random cpumask calculation.
Tests in a 4 CPU laptop with TSC skew detected led to some cases of the per
CPU verification skipping some CPU even with verify_n_cpus=8, due to the
duplicity on random cpumask generation. Skipping the randomization when the
number of online CPUs is smaller than verify_n_cpus, solves that.
Suggested-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/all/20250323173857.372390-1-gpiccoli@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 156fd20a41e776bbf334bd5e45c4f78dfc90ce1c ]
ACPICA commit 987a3b5cf7175916e2a4b6ea5b8e70f830dfe732
I found an ACPI cache leak in ACPI early termination and boot continuing case.
When early termination occurs due to malicious ACPI table, Linux kernel
terminates ACPI function and continues to boot process. While kernel terminates
ACPI function, kmem_cache_destroy() reports Acpi-Operand cache leak.
Boot log of ACPI operand cache leak is as follows:
>[ 0.585957] ACPI: Added _OSI(Module Device)
>[ 0.587218] ACPI: Added _OSI(Processor Device)
>[ 0.588530] ACPI: Added _OSI(3.0 _SCP Extensions)
>[ 0.589790] ACPI: Added _OSI(Processor Aggregator Device)
>[ 0.591534] ACPI Error: Illegal I/O port address/length above 64K: C806E00000004002/0x2 (20170303/hwvalid-155)
>[ 0.594351] ACPI Exception: AE_LIMIT, Unable to initialize fixed events (20170303/evevent-88)
>[ 0.597858] ACPI: Unable to start the ACPI Interpreter
>[ 0.599162] ACPI Error: Could not remove SCI handler (20170303/evmisc-281)
>[ 0.601836] kmem_cache_destroy Acpi-Operand: Slab cache still has objects
>[ 0.603556] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc5 #26
>[ 0.605159] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006
>[ 0.609177] Call Trace:
>[ 0.610063] ? dump_stack+0x5c/0x81
>[ 0.611118] ? kmem_cache_destroy+0x1aa/0x1c0
>[ 0.612632] ? acpi_sleep_proc_init+0x27/0x27
>[ 0.613906] ? acpi_os_delete_cache+0xa/0x10
>[ 0.617986] ? acpi_ut_delete_caches+0x3f/0x7b
>[ 0.619293] ? acpi_terminate+0xa/0x14
>[ 0.620394] ? acpi_init+0x2af/0x34f
>[ 0.621616] ? __class_create+0x4c/0x80
>[ 0.623412] ? video_setup+0x7f/0x7f
>[ 0.624585] ? acpi_sleep_proc_init+0x27/0x27
>[ 0.625861] ? do_one_initcall+0x4e/0x1a0
>[ 0.627513] ? kernel_init_freeable+0x19e/0x21f
>[ 0.628972] ? rest_init+0x80/0x80
>[ 0.630043] ? kernel_init+0xa/0x100
>[ 0.631084] ? ret_from_fork+0x25/0x30
>[ 0.633343] vgaarb: loaded
>[ 0.635036] EDAC MC: Ver: 3.0.0
>[ 0.638601] PCI: Probing PCI hardware
>[ 0.639833] PCI host bridge to bus 0000:00
>[ 0.641031] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
> ... Continue to boot and log is omitted ...
I analyzed this memory leak in detail and found acpi_ds_obj_stack_pop_and_
delete() function miscalculated the top of the stack. acpi_ds_obj_stack_push()
function uses walk_state->operand_index for start position of the top, but
acpi_ds_obj_stack_pop_and_delete() function considers index 0 for it.
Therefore, this causes acpi operand memory leak.
This cache leak causes a security threat because an old kernel (<= 4.9) shows
memory locations of kernel functions in stack dump. Some malicious users
could use this information to neutralize kernel ASLR.
I made a patch to fix ACPI operand cache leak.
Link: https://github.com/acpica/acpica/commit/987a3b5c
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4999480.31r3eYUQgx@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f3efb9569b4a21354ef2caf7ab0608a3e14cc6e4 upstream.
The commit a4e772898f8b ("PCI: Add missing bridge lock to pci_bus_lock()")
made the lock function to call depend on dev->subordinate but left
pci_slot_unlock() unmodified creating locking asymmetry compared with
pci_slot_lock().
Because of the asymmetric lock handling, the same bridge device is unlocked
twice. First pci_bus_unlock() unlocks bus->self and then pci_slot_unlock()
will unconditionally unlock the same bridge device.
Move pci_dev_unlock() inside an else branch to match the logic in
pci_slot_lock().
Fixes: a4e772898f8b ("PCI: Add missing bridge lock to pci_bus_lock()")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250505115412.37628-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c8bcb01352a86bc5592403904109c22b66bd916e upstream.
While cdns_pcie_ep_set_msix() writes the Table Size field correctly (N-1),
the calculation of the PBA offset is wrong because it calculates space for
(N-1) entries instead of N.
This results in the following QEMU error when using PCI passthrough on a
device which relies on the PCI endpoint subsystem:
failed to add PCI capability 0x11[0x50]@0xb0: table & pba overlap, or they don't fit in BARs, or don't align
Fix the calculation of PBA offset in the MSI-X capability.
[bhelgaas: more specific subject and commit log]
Fixes: 3ef5d16f50 ("PCI: cadence: Add MSI-X support to Endpoint driver")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250514074313.283156-10-cassel@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1e7a277a1736e12cc4bd6d93b8a5c439b8ca20c upstream.
page is checked for null in __build_path_from_dentry_optional_prefix
when tcon->origin_fullpath is not set. However, the check is missing when
it is set.
Add a check to prevent a potential NULL pointer dereference.
Signed-off-by: Ruben Devos <devosruben6@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4f60a053a2534c3e510ba0c1f8727566adf8317 upstream.
When calling cifs_reconnect, before the connection to the
server is reestablished, the code today does a DNS resolution and
updates server->dstaddr.
However, this is not necessary for secondary channels. Secondary
channels use the interface list returned by the server to decide
which address to connect to. And that happens after tcon is reconnected
and server interfaces are requested.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1846893991f3b4ec8a0cc12219ada153f0814d6 upstream.
When the server interface info changes (more common in clustered
servers like Azure Files), the per-channel iface gets updated.
However, this did not update the corresponding dstaddr. As a result
these channels will still connect (or try connecting) to older addresses.
Fixes: b54034a73b ("cifs: during reconnect, update interface if necessary")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f396b9bfe39aaf55ea74a7005806164b236653d upstream.
cifs_reconnect can be called with a flag to mark the session as needing
reconnect too. When this is done, we expect the connections of all
channels to be reconnected too, which is not happening today.
Without doing this, we have seen bad things happen when primary and
secondary channels are connected to different servers (in case of cloud
services like Azure Files SMB).
This change would force all connections to reconnect as well, not just
the sessions and tcons.
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7692c9fbedd9087dc9050903f58095915458d9b1 upstream.
When rproc->state = RPROC_DETACHED and rproc_attach() is used
to attach to the remote processor, if rproc_handle_resources()
returns a failure, the resources allocated by imx_rproc_prepare()
should be released, otherwise the following memory leak will occur.
Since almost the same thing is done in imx_rproc_prepare() and
rproc_resource_cleanup(), Function rproc_resource_cleanup() is able
to deal with empty lists so it is better to fix the "goto" statements
in rproc_attach(). replace the "unprepare_device" goto statement with
"clean_up_resources" and get rid of the "unprepare_device" label.
unreferenced object 0xffff0000861c5d00 (size 128):
comm "kworker/u12:3", pid 59, jiffies 4294893509 (age 149.220s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 02 88 00 00 00 00 00 00 10 00 00 00 00 00 ............
backtrace:
[<00000000f949fe18>] slab_post_alloc_hook+0x98/0x37c
[<00000000adbfb3e7>] __kmem_cache_alloc_node+0x138/0x2e0
[<00000000521c0345>] kmalloc_trace+0x40/0x158
[<000000004e330a49>] rproc_mem_entry_init+0x60/0xf8
[<000000002815755e>] imx_rproc_prepare+0xe0/0x180
[<0000000003f61b4e>] rproc_boot+0x2ec/0x528
[<00000000e7e994ac>] rproc_add+0x124/0x17c
[<0000000048594076>] imx_rproc_probe+0x4ec/0x5d4
[<00000000efc298a1>] platform_probe+0x68/0xd8
[<00000000110be6fe>] really_probe+0x110/0x27c
[<00000000e245c0ae>] __driver_probe_device+0x78/0x12c
[<00000000f61f6f5e>] driver_probe_device+0x3c/0x118
[<00000000a7874938>] __device_attach_driver+0xb8/0xf8
[<0000000065319e69>] bus_for_each_drv+0x84/0xe4
[<00000000db3eb243>] __device_attach+0xfc/0x18c
[<0000000072e4e1a4>] device_initial_probe+0x14/0x20
Fixes: 10a3d4079e ("remoteproc: imx_rproc: move memory parsing to rproc_ops")
Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250430092043.1819308-2-xiaolei.wang@windriver.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 65271f868cb1dca709ff69e45939bbef8d6d0b70 upstream.
The function max14577_reg_get_current_limit() calls the function
max14577_read_reg(), but does not check its return value. A proper
implementation can be found in max14577_get_online().
Add a error check for the max14577_read_reg() and return error code
if the function fails.
Fixes: b0902bbeb7 ("regulator: max14577: Add regulator driver for Maxim 14577")
Cc: stable@vger.kernel.org # v3.14
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250526025627.407-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f4ae7c6ecb89bfda026d210dcf8216fb67d2333 upstream.
GCC 15 changed the default C standard dialect from gnu17 to gnu23,
which should not have impacted the kernel because it explicitly requests
the gnu11 standard in the main Makefile. However, mips/vdso code uses
its own CFLAGS without a '-std=' value, which break with this dialect
change because of the kernel's own definitions of bool, false, and true
conflicting with the C23 reserved keywords.
include/linux/stddef.h:11:9: error: cannot use keyword 'false' as enumeration constant
11 | false = 0,
| ^~~~~
include/linux/stddef.h:11:9: note: 'false' is a keyword with '-std=c23' onwards
include/linux/types.h:35:33: error: 'bool' cannot be defined via 'typedef'
35 | typedef _Bool bool;
| ^~~~
include/linux/types.h:35:33: note: 'bool' is a keyword with '-std=c23' onwards
Add -std as specified in KBUILD_CFLAGS to the decompressor and purgatory
CFLAGS to eliminate these errors and make the C standard version of these
areas match the rest of the kernel.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f29b5c231011b94007d2c8a6d793992f2275db1 upstream.
Apply PCI host-bridge window offsets to screen_info framebuffers. Fixes
invalid access to I/O memory.
Resources behind a PCI host bridge can be relocated by a certain offset
in the kernel's CPU address range used for I/O. The framebuffer memory
range stored in screen_info refers to the CPU addresses as seen during
boot (where the offset is 0). During boot up, firmware may assign a
different memory offset to the PCI host bridge and thereby relocating
the framebuffer address of the PCI graphics device as seen by the kernel.
The information in screen_info must be updated as well.
The helper pcibios_bus_to_resource() performs the relocation of the
screen_info's framebuffer resource (given in PCI bus addresses). The
result matches the I/O-memory resource of the PCI graphics device (given
in CPU addresses). As before, we store away the information necessary to
later update the information in screen_info itself.
Commit 78aa89d1dfba ("firmware/sysfb: Update screen_info for relocated
EFI framebuffers") added the code for updating screen_info. It is based
on similar functionality that pre-existed in efifb. Efifb uses a pointer
to the PCI resource, while the newer code does a memcpy of the region.
Hence efifb sees any updates to the PCI resource and avoids the issue.
v3:
- Only use struct pci_bus_region for PCI bus addresses (Bjorn)
- Clarify address semantics in commit messages and comments (Bjorn)
v2:
- Fixed tags (Takashi, Ivan)
- Updated information on efifb
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reported-by: "Ivan T. Ivanov" <iivanov@suse.de>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1240696
Tested-by: "Ivan T. Ivanov" <iivanov@suse.de>
Fixes: 78aa89d1dfba ("firmware/sysfb: Update screen_info for relocated EFI framebuffers")
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.9+
Link: https://lore.kernel.org/r/20250528080234.7380-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ad0452c0277b816a435433cca601304cfac7c21 upstream.
In mii_nway_restart() the code attempts to call
mii->mdio_read which is ch9200_mdio_read(). ch9200_mdio_read()
utilises a local buffer called "buff", which is initialised
with control_read(). However "buff" is conditionally
initialised inside control_read():
if (err == size) {
memcpy(data, buf, size);
}
If the condition of "err == size" is not met, then
"buff" remains uninitialised. Once this happens the
uninitialised "buff" is accessed and returned during
ch9200_mdio_read():
return (buff[0] | buff[1] << 8);
The problem stems from the fact that ch9200_mdio_read()
ignores the return value of control_read(), leading to
uinit-access of "buff".
To fix this we should check the return value of
control_read() and return early on error.
Reported-by: syzbot <syzbot+3361c2d6f78a3e0892f9@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=3361c2d6f78a3e0892f9
Tested-by: syzbot <syzbot+3361c2d6f78a3e0892f9@syzkaller.appspotmail.com>
Fixes: 4a476bd6d1 ("usbnet: New driver for QinHeng CH9200 devices")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Link: https://patch.msgid.link/20250526183607.66527-1-qasdev00@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b15ee09ddb987a122e74fb0fdf1bd6e864959fd3 upstream.
The description of TX_VBOOST_LVL is wrong in register PHY_CTRL3
bit[31:29].
The updated description as below:
011: Corresponds to a launch amplitude of 0.844 V.
100: Corresponds to a launch amplitude of 1.008 V.
101: Corresponds to a launch amplitude of 1.156 V.
This will fix the parsing function
phy_tx_vboost_level_from_property() to return correct value.
Fixes: 63c85ad0cd ("phy: fsl-imx8mp-usb: add support for phy tuning")
Cc: stable@vger.kernel.org
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250430094502.2723983-3-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
