[ Upstream commit 09d88791c7cd888d5195c84733caf9183dcfbd16 ]
The bpf_redirect_info is shared between the SKB and XDP redirect paths,
and the two paths use the same numeric flag values in the ri->flags
field (specifically, BPF_F_BROADCAST == BPF_F_NEXTHOP). This means that
if skb bpf_redirect_neigh() is used with a non-NULL params argument and,
subsequently, an XDP redirect is performed using the same
bpf_redirect_info struct, the XDP path will get confused and end up
crashing, which syzbot managed to trigger.
With the stack-allocated bpf_redirect_info, the structure is no longer
shared between the SKB and XDP paths, so the crash doesn't happen
anymore. However, different code paths using identically-numbered flag
values in the same struct field still seems like a bit of a mess, so
this patch cleans that up by moving the flag definitions together and
redefining the three flags in BPF_F_REDIRECT_INTERNAL to not overlap
with the flags used for XDP. It also adds a BUILD_BUG_ON() check to make
sure the overlap is not re-introduced by mistake.
Fixes: e624d4ed4a ("xdp: Extend xdp_redirect_map with broadcast support")
Reported-by: syzbot+cca39e6e84a367a7e6f6@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://syzkaller.appspot.com/bug?extid=cca39e6e84a367a7e6f6
Link: https://lore.kernel.org/bpf/20240920125625.59465-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db9795a43dc944f048a37b65e06707f60f713e34 ]
In the current implementation, the local variable field_value is used
without prior initialization, which may lead to reading uninitialized
memory. Specifically, in the macro set_mask_bits, the initial
(potentially uninitialized) value of the buffer is copied into old__,
and a mask is applied to calculate new__. A similar issue was resolved in
commit 6ee2a7058f ("iio: accel: bma400: Fix smatch warning based on use
of unintialized value.").
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 961db2da15 ("iio: accel: bma400: Add support for single and double tap events")
Signed-off-by: Mikhail Lobanov <m.lobanov@rosalinux.ru>
Link: https://patch.msgid.link/20240910083624.27224-1-m.lobanov@rosalinux.ru
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b62645b09f870d70c7910e7550289d444239a46 ]
The function __bpf_ringbuf_reserve is invoked from a tracepoint, which
disables preemption. Using spinlock_t in this context can lead to a
"sleep in atomic" warning in the RT variant. This issue is illustrated
in the example below:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 556208, name: test_progs
preempt_count: 1, expected: 0
RCU nest depth: 1, expected: 1
INFO: lockdep is turned off.
Preemption disabled at:
[<ffffd33a5c88ea44>] migrate_enable+0xc0/0x39c
CPU: 7 PID: 556208 Comm: test_progs Tainted: G
Hardware name: Qualcomm SA8775P Ride (DT)
Call trace:
dump_backtrace+0xac/0x130
show_stack+0x1c/0x30
dump_stack_lvl+0xac/0xe8
dump_stack+0x18/0x30
__might_resched+0x3bc/0x4fc
rt_spin_lock+0x8c/0x1a4
__bpf_ringbuf_reserve+0xc4/0x254
bpf_ringbuf_reserve_dynptr+0x5c/0xdc
bpf_prog_ac3d15160d62622a_test_read_write+0x104/0x238
trace_call_bpf+0x238/0x774
perf_call_bpf_enter.isra.0+0x104/0x194
perf_syscall_enter+0x2f8/0x510
trace_sys_enter+0x39c/0x564
syscall_trace_enter+0x220/0x3c0
do_el0_svc+0x138/0x1dc
el0_svc+0x54/0x130
el0t_64_sync_handler+0x134/0x150
el0t_64_sync+0x17c/0x180
Switch the spinlock to raw_spinlock_t to avoid this error.
Fixes: 457f44363a ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: Brian Grech <bgrech@redhat.com>
Signed-off-by: Wander Lairson Costa <wander.lairson@gmail.com>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240920190700.617253-1-wander@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit df97f64dfa upstream.
When converting directory from in-ICB to normal format, the last
iteration through the directory fixing up directory enteries can fail
due to ENOMEM. We do not expect this iteration to fail since the
directory is already verified to be correct and it is difficult to undo
the conversion at this point. So just use GFP_NOFAIL to make sure the
small allocation cannot fail.
Reported-by: syzbot+111eaa994ff74f8d440f@syzkaller.appspotmail.com
Fixes: 0aba4860b0 ("udf: Allocate name buffer in directory iterator on heap")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0aba4860b0 upstream.
Currently we allocate name buffer in directory iterators (struct
udf_fileident_iter) on stack. These structures are relatively large
(some 360 bytes on 64-bit architectures). For udf_rename() which needs
to keep three of these structures in parallel the stack usage becomes
rather heavy - 1536 bytes in total. Allocate the name buffer in the
iterator from heap to avoid excessive stack usage.
Link: https://lore.kernel.org/all/202212200558.lK9x1KW0-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 164cd0e077a18d6208523c82b102c98c77fdd51f upstream.
The cached version avoids redundant commands to the codec, improving
stability and reducing unnecessary operations. This change ensures
better power management and reliable restoration of pin configurations,
especially after hibernation (S4) and other power transitions.
Fixes: 9988844c457f ("ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2")
Suggested-by: Kai-Heng Feng <kaihengf@nvidia.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://patch.msgid.link/20241016080713.46801-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b1e0651e9ce8ce418ad4ff360e7b9925dc5da79 upstream.
It is possible that an interrupt is disabled and masked at the same time.
When the interrupt is enabled again by enable_irq(), only plic_irq_enable()
is called, not plic_irq_unmask(). The interrupt remains masked and never
raises.
An example where interrupt is both disabled and masked is when
handle_fasteoi_irq() is the handler, and IRQS_ONESHOT is set. The interrupt
handler:
1. Mask the interrupt
2. Handle the interrupt
3. Check if interrupt is still enabled, and unmask it (see
cond_unmask_eoi_irq())
If another task disables the interrupt in the middle of the above steps,
the interrupt will not get unmasked, and will remain masked when it is
enabled in the future.
The problem is occasionally observed when PREEMPT_RT is enabled, because
PREEMPT_RT adds the IRQS_ONESHOT flag. But PREEMPT_RT only makes the problem
more likely to appear, the bug has been around since commit a1706a1c50
("irqchip/sifive-plic: Separate the enable and mask operations").
Fix it by unmasking interrupt in plic_irq_enable().
Fixes: a1706a1c50 ("irqchip/sifive-plic: Separate the enable and mask operations")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241003084152.2422969-1-namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 93b8ddc54507a227087c60a0013ed833b6ae7d3c upstream.
The current implementation only calls chained_irq_enter() and
chained_irq_exit() if it detects pending interrupts.
```
for (i = 0; i < info->stride; i++) {
uregmap_read(info->map, id_reg + 4 * i, ®);
if (!reg)
continue;
chained_irq_enter(parent_chip, desc);
```
However, in case of GPIO pin configured in level mode and the parent
controller configured in edge mode, GPIO interrupt might be lowered by the
hardware. In the result, if the interrupt is short enough, the parent
interrupt is still pending while the GPIO interrupt is cleared;
chained_irq_enter() never gets called and the system hangs trying to
service the parent interrupt.
Moving chained_irq_enter() and chained_irq_exit() outside the for loop
ensures that they are called even when GPIO interrupt is lowered by the
hardware.
The similar code with chained_irq_enter() / chained_irq_exit() functions
wrapping interrupt checking loop may be found in many other drivers:
```
grep -r -A 10 chained_irq_enter drivers/pinctrl
```
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Matsievskiy <matsievskiysv@gmail.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/20241012105743.12450-2-matsievskiysv@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ffd95846c6ec6cf1f93da411ea10d504036cab42 upstream.
New processors have become pickier about the local APIC timer state
before entering low power modes. These low power modes are used (for
example) when you close your laptop lid and suspend. If you put your
laptop in a bag and it is not in this low power mode, it is likely
to get quite toasty while it quickly sucks the battery dry.
The problem boils down to some CPUs' inability to power down until the
CPU recognizes that the local APIC timer is shut down. The current
kernel code works in one-shot and periodic modes but does not work for
deadline mode. Deadline mode has been the supported and preferred mode
on Intel CPUs for over a decade and uses an MSR to drive the timer
instead of an APIC register.
Disable the TSC Deadline timer in lapic_timer_shutdown() by writing to
MSR_IA32_TSC_DEADLINE when in TSC-deadline mode. Also avoid writing
to the initial-count register (APIC_TMICT) which is ignored in
TSC-deadline mode.
Note: The APIC_LVTT|=APIC_LVT_MASKED operation should theoretically be
enough to tell the hardware that the timer will not fire in any of the
timer modes. But mitigating AMD erratum 411[1] also requires clearing
out APIC_TMICT. Solely setting APIC_LVT_MASKED is also ineffective in
practice on Intel Lunar Lake systems, which is the motivation for this
change.
1. 411 Processor May Exit Message-Triggered C1E State Without an Interrupt if Local APIC Timer Reaches Zero - https://www.amd.com/content/dam/amd/en/documents/archived-tech-docs/revision-guides/41322_10h_Rev_Gd.pdf
Fixes: 279f146143 ("x86: apic: Use tsc deadline for oneshot when available")
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Todd Brandt <todd.e.brandt@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241015061522.25288-1-rui.zhang%40intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5fd042bf4cfb557981d65628e1779a492cd8cfa upstream.
After a recent LLVM change [1] that deduces __cold on functions that only call
cold code (such as __init functions), there is a section mismatch warning from
__get_mem_config_intel(), which got moved to .text.unlikely. as a result of
that optimization:
WARNING: modpost: vmlinux: section mismatch in reference: \
__get_mem_config_intel+0x77 (section: .text.unlikely.) -> thread_throttle_mode_init (section: .init.text)
Mark __get_mem_config_intel() as __init as well since it is only called
from __init code, which clears up the warning.
While __rdt_get_mem_config_amd() does not exhibit a warning because it
does not call any __init code, it is a similar function that is only
called from __init code like __get_mem_config_intel(), so mark it __init
as well to keep the code symmetrical.
CONFIG_SECTION_MISMATCH_WARN_ONLY=n would turn this into a fatal error.
Fixes: 05b93417ce ("x86/intel_rdt/mba: Add primary support for Memory Bandwidth Allocation (MBA)")
Fixes: 4d05bf71f1 ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: <stable@kernel.org>
Link: 6b11573b8c [1]
Link: https://lore.kernel.org/r/20240917-x86-restctrl-get_mem_config_intel-init-v3-1-10d521256284@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02ac3a9ef3a18b58d8f3ea2b6e46de657bf6c4f9 upstream.
The recent fix for array out-of-bounds accesses replaced sprintf()
calls blindly with snprintf(). However, since snprintf() returns the
would-be-printed size, not the actually output size, the length
calculation can still go over the given limit.
Use scnprintf() instead of snprintf(), which returns the actually
output letters, for addressing the potential out-of-bounds access
properly.
Fixes: ab11dac93d2d ("dev/parport: fix the array out-of-bounds risk")
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240920103318.19271-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c96e31252110a84dcc44412e8a7b456b33c3e298 upstream.
DWC3 programming guide mentions that when operating in USB2.0 speeds,
if GUSB2PHYCFG[6] or GUSB2PHYCFG[8] is set, it must be cleared prior
to issuing commands and may be set again after the command completes.
But currently while issuing EndXfer command without CmdIOC set, we
wait for 1ms after GUSB2PHYCFG is restored. This results in cases
where EndXfer command doesn't get completed and causes SMMU faults
since requests are unmapped afterwards. Hence restore GUSB2PHYCFG
after waiting for EndXfer command completion.
Cc: stable@vger.kernel.org
Fixes: 1d26ba0944d3 ("usb: dwc3: Wait unconditionally after issuing EndXfer command")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240924093208.2524531-1-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe49df60cdb7c2975aa743dc295f8786e4b7db10 upstream.
Avoid xHC host from processing a cancelled URB by always turning
cancelled URB TDs into no-op TRBs before queuing a 'Set TR Deq' command.
If the command fails then xHC will start processing the cancelled TD
instead of skipping it once endpoint is restarted, causing issues like
Babble error.
This is not a complete solution as a failed 'Set TR Deq' command does not
guarantee xHC TRB caches are cleared.
Fixes: 4db356924a ("xhci: turn cancelled td cleanup to its own function")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241016140000.783905-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6599b6a6fa8060145046d0744456b6abdb3122a7 upstream.
The stream contex type (SCT) bitfield is used both in the stream context
data structure, and in the 'Set TR Dequeue pointer' command TRB.
In both cases it uses bits 3:1
The SCT_FOR_TRB(p) macro used to set the stream context type (SCT) field
for the 'Set TR Dequeue pointer' command TRB incorrectly shifts the value
1 bit left before masking the three bits.
Fix this by first masking and rshifting, just like the similar
SCT_FOR_CTX(p) macro does
This issue has not been visibile as the lost bit 3 is only used with
secondary stream arrays (SSA). Xhci driver currently only supports using
a primary stream array with Linear stream addressing.
Fixes: 95241dbdf8 ("xhci: Set SCT field for Set TR dequeue on streams")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241016140000.783905-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c1dda2acc4192d826e84008d963b528e24d12bc upstream.
Fake CSR controllers don't seem to handle short-transfer properly which
cause command to time out:
kernel: usb 1-1: new full-speed USB device number 19 using xhci_hcd
kernel: usb 1-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
kernel: usb 1-1: Product: BT DONGLE10
...
Bluetooth: hci1: Opcode 0x1004 failed: -110
kernel: Bluetooth: hci1: command 0x1004 tx timeout
According to USB Spec 2.0 Section 5.7.3 Interrupt Transfer Packet Size
Constraints a interrupt transfer is considered complete when the size is 0
(ZPL) or < wMaxPacketSize:
'When an interrupt transfer involves more data than can fit in one
data payload of the currently established maximum size, all data
payloads are required to be maximum-sized except for the last data
payload, which will contain the remaining data. An interrupt transfer
is complete when the endpoint does one of the following:
• Has transferred exactly the amount of data expected
• Transfers a packet with a payload size less than wMaxPacketSize or
transfers a zero-length packet'
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219365
Fixes: 7b05933340f4 ("Bluetooth: btusb: Fix not handling ZPL/short-transfer")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9b7b535ba192c6b77e6c15a4c82d853163eab8c upstream.
If bt_debugfs is not created successfully, which happens if either
CONFIG_DEBUG_FS or CONFIG_DEBUG_FS_ALLOW_ALL is unset, then iso_init()
returns early and does not set iso_inited to true. This means that a
subsequent call to iso_init() will result in duplicate calls to
proto_register(), bt_sock_register(), etc.
With CONFIG_LIST_HARDENED and CONFIG_BUG_ON_DATA_CORRUPTION enabled, the
duplicate call to proto_register() triggers this BUG():
list_add double add: new=ffffffffc0b280d0, prev=ffffffffbab56250,
next=ffffffffc0b280d0.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:35!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 2 PID: 887 Comm: bluetoothd Not tainted 6.10.11-1-ao-desktop #1
RIP: 0010:__list_add_valid_or_report+0x9a/0xa0
...
__list_add_valid_or_report+0x9a/0xa0
proto_register+0x2b5/0x340
iso_init+0x23/0x150 [bluetooth]
set_iso_socket_func+0x68/0x1b0 [bluetooth]
kmem_cache_free+0x308/0x330
hci_sock_sendmsg+0x990/0x9e0 [bluetooth]
__sock_sendmsg+0x7b/0x80
sock_write_iter+0x9a/0x110
do_iter_readv_writev+0x11d/0x220
vfs_writev+0x180/0x3e0
do_writev+0xca/0x100
...
This change removes the early return. The check for iso_debugfs being
NULL was unnecessary, it is always NULL when iso_inited is false.
Cc: stable@vger.kernel.org
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d458cd1221e9e56da3b2cc5518ad3225caa91f20 upstream.
If iso_init() has been called, iso_exit() must be called on module
unload. Without that, the struct proto that iso_init() registered with
proto_register() becomes invalid, which could cause unpredictable
problems later. In my case, with CONFIG_LIST_HARDENED and
CONFIG_BUG_ON_DATA_CORRUPTION enabled, loading the module again usually
triggers this BUG():
list_add corruption. next->prev should be prev (ffffffffb5355fd0),
but was 0000000000000068. (next=ffffffffc0a010d0).
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 4159 Comm: modprobe Not tainted 6.10.11-4+bt2-ao-desktop #1
RIP: 0010:__list_add_valid_or_report+0x61/0xa0
...
__list_add_valid_or_report+0x61/0xa0
proto_register+0x299/0x320
hci_sock_init+0x16/0xc0 [bluetooth]
bt_init+0x68/0xd0 [bluetooth]
__pfx_bt_init+0x10/0x10 [bluetooth]
do_one_initcall+0x80/0x2f0
do_init_module+0x8b/0x230
__do_sys_init_module+0x15f/0x190
do_syscall_64+0x68/0x110
...
Cc: stable@vger.kernel.org
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 530688e39c644543b71bdd9cb45fdfb458a28eaa upstream.
The opt3001 driver uses predetermined full-scale range values to
determine what exponent to use for event trigger threshold values.
The problem is that one of the values specified in the datasheet is
missing from the implementation. This causes larger values to be
scaled down to an incorrect exponent, effectively reducing the
maximum settable threshold value by a factor of 2.
Add missing full-scale range array value.
Fixes: 94a9b7b180 ("iio: light: add support for TI's opt3001 light sensor")
Signed-off-by: Emil Gedenryd <emil.gedenryd@axis.com>
Cc: <Stable@vger.kernel.org>
Link: https://patch.msgid.link/20240913-add_opt3002-v2-1-69e04f840360@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7c44e57750c31de43906d97813273fdffcf7d02 upstream.
The dev pointer that is received as an argument in the
in_illuminance_period_available_show function references the device
embedded in the IIO device, not in the i2c client.
dev_to_iio_dev() must be used to accessthe right data. The current
implementation leads to a segmentation fault on every attempt to read
the attribute because indio_dev gets a NULL assignment.
This bug has been present since the first appearance of the driver,
apparently since the last version (V6) before getting applied. A
constant attribute was used until then, and the last modifications might
have not been tested again.
Cc: stable@vger.kernel.org
Fixes: 7b779f573c ("iio: light: add driver for veml6030 ambient light sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240913-veml6035-v1-3-0b09c0c90418@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9e9746f275c45108f2b0633a4855d65d9ae0736 upstream.
The driver still uses the sensor resolution provided in the datasheet
until Rev. 1.6, 28-Apr-2022, which was updated with Rev 1.7,
28-Nov-2023. The original ambient light resolution has been updated from
0.0036 lx/ct to 0.0042 lx/ct, which is the value that can be found in
the current device datasheet.
Update the default resolution for IT = 100 ms and GAIN = 1/8 from the
original 4608 mlux/cnt to the current value from the "Resolution and
maximum detection range" table (Application Note 84367, page 5), 5376
mlux/cnt.
Cc: <stable@vger.kernel.org>
Fixes: 7b779f573c ("iio: light: add driver for veml6030 ambient light sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240923-veml6035-v2-1-58c72a0df31c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0ec082f10b7a1fd25e8c1e2a686440da913b7a3 upstream.
Before this patch, if multiple BO_HANDLES chunks were submitted,
the error -EINVAL would be correctly set but could be overwritten
by the return value from amdgpu_cs_p1_bo_handles(). This patch
ensures that if there are multiple BO_HANDLES, we stop.
Fixes: fec5f8e8c6bc ("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit")
Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 40f2cd98828f454bdc5006ad3d94330a5ea164b7)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28127dba64d8ae1a0b737b973d6d029908599611 upstream.
Include the encoder itself in its possible_clones bitmask.
In the past nothing validated that drivers were populating
possible_clones correctly, but that changed in commit
74d2aacbe8 ("drm: Validate encoder->possible_clones").
Looks like radeon never got the memo and is still not
following the rules 100% correctly.
This results in some warnings during driver initialization:
Bogus possible_clones: [ENCODER:46:TV-46] possible_clones=0x4 (full encoder mask=0x7)
WARNING: CPU: 0 PID: 170 at drivers/gpu/drm/drm_mode_config.c:615 drm_mode_config_validate+0x113/0x39c
...
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Fixes: 74d2aacbe8 ("drm: Validate encoder->possible_clones")
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/20241009000321.418e4294@yea/
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3b6e7d40649c0d75572039aff9d0911864c689db)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28aabffae6be54284869a91cd8bccd3720041129 upstream.
When an application uses SQPOLL, it must wait for the SQPOLL thread to
consume SQE entries, if it fails to get an sqe when calling
io_uring_get_sqe(). It can do so by calling io_uring_enter(2) with the
flag value of IORING_ENTER_SQ_WAIT. In liburing, this is generally done
with io_uring_sqring_wait(). There's a natural expectation that once
this call returns, a new SQE entry can be retrieved, filled out, and
submitted. However, the kernel uses the cached sq head to determine if
the SQRING is full or not. If the SQPOLL thread is currently in the
process of submitting SQE entries, it may have updated the cached sq
head, but not yet committed it to the SQ ring. Hence the kernel may find
that there are SQE entries ready to be consumed, and return successfully
to the application. If the SQPOLL thread hasn't yet committed the SQ
ring entries by the time the application returns to userspace and
attempts to get a new SQE, it will fail getting a new SQE.
Fix this by having io_sqring_full() always use the user visible SQ ring
head entry, rather than the internally cached one.
Cc: stable@vger.kernel.org # 5.10+
Link: https://github.com/axboe/liburing/discussions/1267
Reported-by: Benedek Thaler <thaler@thaler.hu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
