commit 8396c793ffdf28bb8aee7cfe0891080f8cab7890 upstream.
Commit 616f87661792 ("mmc: pass queue_limits to blk_mq_alloc_disk") [1]
revealed the long living issue in dw_mmc.c driver, existing since the
time when it was first introduced in commit f95f3850f7 ("mmc: dw_mmc:
Add Synopsys DesignWare mmc host driver."), also making kernel boot
broken on platforms using dw_mmc driver with 16K or 64K pages enabled,
with this message in dmesg:
mmcblk: probe of mmc0:0001 failed with error -22
That's happening because mmc_blk_probe() fails when it calls
blk_validate_limits() consequently, which returns the error due to
failed max_segment_size check in this code:
/*
* The maximum segment size has an odd historic 64k default that
* drivers probably should override. Just like the I/O size we
* require drivers to at least handle a full page per segment.
*/
...
if (WARN_ON_ONCE(lim->max_segment_size < PAGE_SIZE))
return -EINVAL;
In case when IDMAC (Internal DMA Controller) is used, dw_mmc.c always
sets .max_seg_size to 4 KiB:
mmc->max_seg_size = 0x1000;
The comment in the code above explains why it's incorrect. Arnd
suggested setting .max_seg_size to .max_req_size to fix it, which is
also what some other drivers are doing:
$ grep -rl 'max_seg_size.*=.*max_req_size' drivers/mmc/host/ | \
wc -l
18
This change is not only fixing the boot with 16K/64K pages, but also
leads to a better MMC performance. The linear write performance was
tested on E850-96 board (eMMC only), before commit [1] (where it's
possible to boot with 16K/64K pages without this fix, to be able to do
a comparison). It was tested with this command:
# dd if=/dev/zero of=somefile bs=1M count=500 oflag=sync
Test results are as follows:
- 4K pages, .max_seg_size = 4 KiB: 94.2 MB/s
- 4K pages, .max_seg_size = .max_req_size = 512 KiB: 96.9 MB/s
- 16K pages, .max_seg_size = 4 KiB: 126 MB/s
- 16K pages, .max_seg_size = .max_req_size = 2 MiB: 128 MB/s
- 64K pages, .max_seg_size = 4 KiB: 138 MB/s
- 64K pages, .max_seg_size = .max_req_size = 8 MiB: 138 MB/s
Unfortunately, SD card controller is not enabled in E850-96 yet, so it
wasn't possible for me to run the test on some cheap SD cards to check
this patch's impact on those. But it's possible that this change might
also reduce the writes count, thus improving SD/eMMC longevity.
All credit for the analysis and the suggested solution goes to Arnd.
[1] https://lore.kernel.org/all/20240215070300.2200308-18-hch@lst.de/
Fixes: f95f3850f7 ("mmc: dw_mmc: Add Synopsys DesignWare mmc host driver.")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYtddf2Fd3be+YShHP6CmSDNcn0ptW8qg+stUKW+Cn0rjQ@mail.gmail.com/
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240306232052.21317-1-semen.protsenko@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 469e5e4713989fdd5e3e502b922e7be0da2464b9 upstream.
Applying MMC_QUIRK_BROKEN_SD_CACHE is broken, as the card's SD quirks are
referenced in sd_parse_ext_reg_perf() prior to the quirks being initialized
in mmc_blk_probe().
To fix this problem, let's split out an SD-specific list of quirks and
apply in mmc_sd_init_card() instead. In this way, sd_read_ext_regs() to has
the available information for not assigning the SD_EXT_PERF_CACHE as one of
the (un)supported features, which in turn allows mmc_sd_init_card() to
properly skip execution of sd_enable_cache().
Fixes: c467c8f081 ("mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019")
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
Co-developed-by: Keita Aihara <keita.aihara@sony.com>
Signed-off-by: Keita Aihara <keita.aihara@sony.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240820230631.GA436523@sony.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e9683c9b6ca88cc9340cdca85edd6134c8cffe3 upstream.
Due to 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 there could be keys stored
with the wrong address type so this attempt to detect it and ignore them
instead of just failing to load all keys.
Cc: stable@vger.kernel.org
Link: https://github.com/bluez/bluez/issues/875
Fixes: 59b047bc9808 ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5a3c952e82c1ada12bf8c55b73af26f1a454bd2 upstream.
Currently while defining `THIS_MODULE` symbol in `module!()`, the
pointer used to construct `ThisModule` is derived from an immutable
reference of `__this_module`, which means the pointer doesn't have
the provenance for writing, and that means any write to that pointer
is UB regardless of data races or not. However, the usage of
`THIS_MODULE` includes passing this pointer to functions that may write
to it (probably in unsafe code), and this will create soundness issues.
One way to fix this is using `addr_of_mut!()` but that requires the
unstable feature "const_mut_refs". So instead of `addr_of_mut()!`,
an extern static `Opaque` is used here: since `Opaque<T>` is transparent
to `T`, an extern static `Opaque` will just wrap the C symbol (defined
in a C compile unit) in an `Opaque`, which provides a pointer with
writable provenance via `Opaque::get()`. This fix the potential UBs
because of pointer provenance unmatched.
Reported-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Closes: https://rust-for-linux.zulipchat.com/#narrow/stream/x/topic/x/near/465412664
Fixes: 1fbde52bde ("rust: add `macros` crate")
Cc: stable@vger.kernel.org # 6.6.x: be2ca1e03965: ("rust: types: Make Opaque::get const")
Link: https://lore.kernel.org/r/20240828180129.4046355-1-boqun.feng@gmail.com
[ Fixed two typos, reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be2ca1e03965ffb214b6cbda0ffd84daeeb5f214 upstream.
To support a potential usage:
static foo: Opaque<Foo> = ..; // Or defined in an extern block.
...
fn bar() {
let ptr = foo.get();
}
`Opaque::get` need to be `const`, otherwise compiler will complain
because calls on statics are limited to const functions.
Also `Opaque::get` should be naturally `const` since it's a composition
of two `const` functions: `UnsafeCell::get` and `ptr::cast`.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Wedson Almeida Filho <walmeida@microsoft.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240401214543.1242286-1-boqun.feng@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61aa894e7a2fda4ee026523b01d07e83ce2abb72 upstream.
On some TUXEDO platforms, a Samsung 990 Evo NVMe leads to a high
power consumption in s2idle sleep (2-3 watts).
This patch applies 'Force No Simple Suspend' quirk to achieve a
sleep with a lower power consumption, typically around 0.5 watts.
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d33d26036a0274b472299d7dcdaa5fb34329f91b upstream.
rt_mutex_handle_deadlock() is called with rt_mutex::wait_lock held. In the
good case it returns with the lock held and in the deadlock case it emits a
warning and goes into an endless scheduling loop with the lock held, which
triggers the 'scheduling in atomic' warning.
Unlock rt_mutex::wait_lock in the dead lock case before issuing the warning
and dropping into the schedule for ever loop.
[ tglx: Moved unlock before the WARN(), removed the pointless comment,
massaged changelog, added Fixes tag ]
Fixes: 3d5c9340d1 ("rtmutex: Handle deadlock detection smarter")
Signed-off-by: Roland Xu <mu001999@outlook.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/ME0P300MB063599BEF0743B8FA339C2CECC802@ME0P300MB0635.AUSP300.PROD.OUTLOOK.COM
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea72ce5da22806d5713f3ffb39a6d5ae73841f93 upstream.
iounmap() on x86 occasionally fails to unmap because the provided valid
ioremap address is not below high_memory. It turned out that this
happens due to KASLR.
KASLR uses the full address space between PAGE_OFFSET and vaddr_end to
randomize the starting points of the direct map, vmalloc and vmemmap
regions. It thereby limits the size of the direct map by using the
installed memory size plus an extra configurable margin for hot-plug
memory. This limitation is done to gain more randomization space
because otherwise only the holes between the direct map, vmalloc,
vmemmap and vaddr_end would be usable for randomizing.
The limited direct map size is not exposed to the rest of the kernel, so
the memory hot-plug and resource management related code paths still
operate under the assumption that the available address space can be
determined with MAX_PHYSMEM_BITS.
request_free_mem_region() allocates from (1 << MAX_PHYSMEM_BITS) - 1
downwards. That means the first allocation happens past the end of the
direct map and if unlucky this address is in the vmalloc space, which
causes high_memory to become greater than VMALLOC_START and consequently
causes iounmap() to fail for valid ioremap addresses.
MAX_PHYSMEM_BITS cannot be changed for that because the randomization
does not align with address bit boundaries and there are other places
which actually require to know the maximum number of address bits. All
remaining usage sites of MAX_PHYSMEM_BITS have been analyzed and found
to be correct.
Cure this by exposing the end of the direct map via PHYSMEM_END and use
that for the memory hot-plug and resource management related places
instead of relying on MAX_PHYSMEM_BITS. In the KASLR case PHYSMEM_END
maps to a variable which is initialized by the KASLR initialization and
otherwise it is based on MAX_PHYSMEM_BITS as before.
To prevent future hickups add a check into add_pages() to catch callers
trying to add memory above PHYSMEM_END.
Fixes: 0483e1fa6e ("x86/mm: Implement ASLR for kernel memory regions")
Reported-by: Max Ramanouski <max8rr8@gmail.com>
Reported-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-By: Max Ramanouski <max8rr8@gmail.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/87ed6soy3z.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25dfc9e357af8aed1ca79b318a73f2c59c1f0b2b upstream.
Running the ltp test cve-2015-3290 concurrently reports the following
warnings.
perfevents: irq loop stuck!
WARNING: CPU: 31 PID: 32438 at arch/x86/events/intel/core.c:3174
intel_pmu_handle_irq+0x285/0x370
Call Trace:
<NMI>
? __warn+0xa4/0x220
? intel_pmu_handle_irq+0x285/0x370
? __report_bug+0x123/0x130
? intel_pmu_handle_irq+0x285/0x370
? __report_bug+0x123/0x130
? intel_pmu_handle_irq+0x285/0x370
? report_bug+0x3e/0xa0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1a/0x20
? irq_work_claim+0x1e/0x40
? intel_pmu_handle_irq+0x285/0x370
perf_event_nmi_handler+0x3d/0x60
nmi_handle+0x104/0x330
Thanks to Thomas Gleixner's analysis, the issue is caused by the low
initial period (1) of the frequency estimation algorithm, which triggers
the defects of the HW, specifically erratum HSW11 and HSW143. (For the
details, please refer https://lore.kernel.org/lkml/87plq9l5d2.ffs@tglx/)
The HSW11 requires a period larger than 100 for the INST_RETIRED.ALL
event, but the initial period in the freq mode is 1. The erratum is the
same as the BDM11, which has been supported in the kernel. A minimum
period of 128 is enforced as well on HSW.
HSW143 is regarding that the fixed counter 1 may overcount 32 with the
Hyper-Threading is enabled. However, based on the test, the hardware
has more issues than it tells. Besides the fixed counter 1, the message
'interrupt took too long' can be observed on any counter which was armed
with a period < 32 and two events expired in the same NMI. A minimum
period of 32 is enforced for the rest of the events.
The recommended workaround code of the HSW143 is not implemented.
Because it only addresses the issue for the fixed counter. It brings
extra overhead through extra MSR writing. No related overcounting issue
has been reported so far.
Fixes: 3a632cb229 ("perf/x86/intel: Add simple Haswell PMU support")
Reported-by: Li Huafei <lihuafei1@huawei.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240819183004.3132920-1-kan.liang@linux.intel.com
Closes: https://lore.kernel.org/lkml/20240729223328.327835-1-lihuafei1@huawei.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6fb565a2d15277896583d471b21bc14a0c99661 upstream.
The mmio_read() function makes a TDVMCALL to retrieve MMIO data for an
address from the VMM.
Sean noticed that mmio_read() unintentionally exposes the value of an
initialized variable (val) on the stack to the VMM.
This variable is only needed as an output value. It did not need to be
passed to the VMM in the first place.
Do not send the original value of *val to the VMM.
[ dhansen: clarify what 'val' is used for. ]
Fixes: 31d58c4e55 ("x86/tdx: Handle in-kernel MMIO")
Reported-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240826125304.1566719-1-kirill.shutemov%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 284b75a3d83c7631586d98f6dede1d90f128f0db upstream.
In ata_host_alloc(), if devres_alloc() fails to allocate the device host
resource data pointer, the already allocated ata_host structure is not
freed before returning from the function. This results in a potential
memory leak.
Call kfree(host) before jumping to the error handling path to ensure
that the ata_host structure is properly freed if devres_alloc() fails.
Fixes: 2623c7a5f2 ("libata: add refcounting to ata_host")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 734ad0af3609464f8f93e00b6c0de1e112f44559 upstream.
If an interrupt occurs in queued_spin_lock_slowpath() after we increment
qnodesp->count and before node->lock is initialized, another CPU might
see stale lock values in get_tail_qnode(). If the stale lock value happens
to match the lock on that CPU, then we write to the "next" pointer of
the wrong qnode. This causes a deadlock as the former CPU, once it becomes
the head of the MCS queue, will spin indefinitely until it's "next" pointer
is set by its successor in the queue.
Running stress-ng on a 16 core (16EC/16VP) shared LPAR, results in
occasional lockups similar to the following:
$ stress-ng --all 128 --vm-bytes 80% --aggressive \
--maximize --oomable --verify --syslog \
--metrics --times --timeout 5m
watchdog: CPU 15 Hard LOCKUP
......
NIP [c0000000000b78f4] queued_spin_lock_slowpath+0x1184/0x1490
LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90
Call Trace:
0xc000002cfffa3bf0 (unreliable)
_raw_spin_lock+0x6c/0x90
raw_spin_rq_lock_nested.part.135+0x4c/0xd0
sched_ttwu_pending+0x60/0x1f0
__flush_smp_call_function_queue+0x1dc/0x670
smp_ipi_demux_relaxed+0xa4/0x100
xive_muxed_ipi_action+0x20/0x40
__handle_irq_event_percpu+0x80/0x240
handle_irq_event_percpu+0x2c/0x80
handle_percpu_irq+0x84/0xd0
generic_handle_irq+0x54/0x80
__do_irq+0xac/0x210
__do_IRQ+0x74/0xd0
0x0
do_IRQ+0x8c/0x170
hardware_interrupt_common_virt+0x29c/0x2a0
--- interrupt: 500 at queued_spin_lock_slowpath+0x4b8/0x1490
......
NIP [c0000000000b6c28] queued_spin_lock_slowpath+0x4b8/0x1490
LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90
--- interrupt: 500
0xc0000029c1a41d00 (unreliable)
_raw_spin_lock+0x6c/0x90
futex_wake+0x100/0x260
do_futex+0x21c/0x2a0
sys_futex+0x98/0x270
system_call_exception+0x14c/0x2f0
system_call_vectored_common+0x15c/0x2ec
The following code flow illustrates how the deadlock occurs.
For the sake of brevity, assume that both locks (A and B) are
contended and we call the queued_spin_lock_slowpath() function.
CPU0 CPU1
---- ----
spin_lock_irqsave(A) |
spin_unlock_irqrestore(A) |
spin_lock(B) |
| |
▼ |
id = qnodesp->count++; |
(Note that nodes[0].lock == A) |
| |
▼ |
Interrupt |
(happens before "nodes[0].lock = B") |
| |
▼ |
spin_lock_irqsave(A) |
| |
▼ |
id = qnodesp->count++ |
nodes[1].lock = A |
| |
▼ |
Tail of MCS queue |
| spin_lock_irqsave(A)
▼ |
Head of MCS queue ▼
| CPU0 is previous tail
▼ |
Spin indefinitely ▼
(until "nodes[1].next != NULL") prev = get_tail_qnode(A, CPU0)
|
▼
prev == &qnodes[CPU0].nodes[0]
(as qnodes[CPU0].nodes[0].lock == A)
|
▼
WRITE_ONCE(prev->next, node)
|
▼
Spin indefinitely
(until nodes[0].locked == 1)
Thanks to Saket Kumar Bhaskar for help with recreating the issue
Fixes: 84990b1695 ("powerpc/qspinlock: add mcs queueing for contended waiters")
Cc: stable@vger.kernel.org # v6.2+
Reported-by: Geetika Moolchandani <geetika@linux.ibm.com>
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Reported-by: Jijo Varghese <vargjijo@in.ibm.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240829022830.1164355-1-nysal@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bcdd831d9d01e0fb64faea50732b59b2ee88da1 upstream.
Grab kvm->srcu when processing KVM_SET_VCPU_EVENTS, as KVM will forcibly
leave nested VMX/SVM if SMM mode is being toggled, and leaving nested VMX
reads guest memory.
Note, kvm_vcpu_ioctl_x86_set_vcpu_events() can also be called from KVM_RUN
via sync_regs(), which already holds SRCU. I.e. trying to precisely use
kvm_vcpu_srcu_read_lock() around the problematic SMM code would cause
problems. Acquiring SRCU isn't all that expensive, so for simplicity,
grab it unconditionally for KVM_SET_VCPU_EVENTS.
=============================
WARNING: suspicious RCU usage
6.10.0-rc7-332d2c1d713e-next-vm #552 Not tainted
-----------------------------
include/linux/kvm_host.h:1027 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by repro/1071:
#0: ffff88811e424430 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x7d/0x970 [kvm]
stack backtrace:
CPU: 15 PID: 1071 Comm: repro Not tainted 6.10.0-rc7-332d2c1d713e-next-vm #552
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0x90
lockdep_rcu_suspicious+0x13f/0x1a0
kvm_vcpu_gfn_to_memslot+0x168/0x190 [kvm]
kvm_vcpu_read_guest+0x3e/0x90 [kvm]
nested_vmx_load_msr+0x6b/0x1d0 [kvm_intel]
load_vmcs12_host_state+0x432/0xb40 [kvm_intel]
vmx_leave_nested+0x30/0x40 [kvm_intel]
kvm_vcpu_ioctl_x86_set_vcpu_events+0x15d/0x2b0 [kvm]
kvm_arch_vcpu_ioctl+0x1107/0x1750 [kvm]
? mark_held_locks+0x49/0x70
? kvm_vcpu_ioctl+0x7d/0x970 [kvm]
? kvm_vcpu_ioctl+0x497/0x970 [kvm]
kvm_vcpu_ioctl+0x497/0x970 [kvm]
? lock_acquire+0xba/0x2d0
? find_held_lock+0x2b/0x80
? do_user_addr_fault+0x40c/0x6f0
? lock_release+0xb7/0x270
__x64_sys_ioctl+0x82/0xb0
do_syscall_64+0x6c/0x170
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7ff11eb1b539
</TASK>
Fixes: f7e570780e ("KVM: x86: Forcibly leave nested virt when SMM state is toggled")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240723232055.3643811-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4a90b543d9f62d3ac34ec1ab97fc5334b048565 upstream.
When using kernel with the following extra config,
- CONFIG_KASAN=y
- CONFIG_KASAN_GENERIC=y
- CONFIG_KASAN_INLINE=y
- CONFIG_KASAN_VMALLOC=y
- CONFIG_FRAME_WARN=4096
kernel detects that snd_pcm_suspend_all() access a freed
'snd_soc_pcm_runtime' object when the system is suspended, which
leads to a use-after-free bug:
[ 52.047746] BUG: KASAN: use-after-free in snd_pcm_suspend_all+0x1a8/0x270
[ 52.047765] Read of size 1 at addr ffff0000b9434d50 by task systemd-sleep/2330
[ 52.047785] Call trace:
[ 52.047787] dump_backtrace+0x0/0x3c0
[ 52.047794] show_stack+0x34/0x50
[ 52.047797] dump_stack_lvl+0x68/0x8c
[ 52.047802] print_address_description.constprop.0+0x74/0x2c0
[ 52.047809] kasan_report+0x210/0x230
[ 52.047815] __asan_report_load1_noabort+0x3c/0x50
[ 52.047820] snd_pcm_suspend_all+0x1a8/0x270
[ 52.047824] snd_soc_suspend+0x19c/0x4e0
The snd_pcm_sync_stop() has a NULL check on 'substream->runtime' before
making any access. So we need to always set 'substream->runtime' to NULL
everytime we kfree() it.
Fixes: a72706ed82 ("ASoC: codec2codec: remove ephemeral variables")
Signed-off-by: robelin <robelin@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://patch.msgid.link/20240823144342.4123814-2-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b3a2a9c6349e25a025d2330f479bc33a6ccb54a upstream.
If netem_dequeue() enqueues packet to inner qdisc and that qdisc
returns __NET_XMIT_STOLEN. The packet is dropped but
qdisc_tree_reduce_backlog() is not called to update the parent's
q.qlen, leading to the similar use-after-free as Commit
e04991a48dbaf382 ("netem: fix return value if duplicate enqueue
fails")
Commands to trigger KASAN UaF:
ip link add type dummy
ip link set lo up
ip link set dummy0 up
tc qdisc add dev lo parent root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: netem
tc qdisc add dev lo parent 2: handle 3: drr
tc filter add dev lo parent 3: basic classid 3:1 action mirred egress
redirect dev dummy0
tc class add dev lo classid 3:1 drr
ping -c1 -W0.01 localhost # Trigger bug
tc class del dev lo classid 1:1
tc class add dev lo classid 1:1 drr
ping -c1 -W0.01 localhost # UaF
Fixes: 50612537e9 ("netem: fix classful handling")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20240901182438.4992-1-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71833e79a42178d8a50b5081c98c78ace9325628 upstream.
Replace IS_ENABLED() with IS_REACHABLE() to substitute empty stubs for:
i2c_acpi_get_i2c_resource()
i2c_acpi_client_count()
i2c_acpi_find_bus_speed()
i2c_acpi_new_device_by_fwnode()
i2c_adapter *i2c_acpi_find_adapter_by_handle()
i2c_acpi_waive_d0_probe()
commit f17c06c6608a ("i2c: Fix conditional for substituting empty ACPI
functions") partially fixed this conditional to depend on CONFIG_I2C,
but used IS_ENABLED(), which is wrong since CONFIG_I2C is tristate.
CONFIG_ACPI is boolean but let's also change it to use IS_REACHABLE()
to future-proof it against becoming tristate.
Somehow despite testing various combinations of CONFIG_I2C and CONFIG_ACPI
we missed the combination CONFIG_I2C=m, CONFIG_ACPI=y.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f17c06c6608a ("i2c: Fix conditional for substituting empty ACPI functions")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408141333.gYnaitcV-lkp@intel.com/
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8321fa75102246d7415a6af441872f6637c93ab upstream.
After the commit bdacf3e34945 ("net: Use nested-BH locking for
napi_alloc_cache.") was merged, the following warning began to appear:
WARNING: CPU: 5 PID: 1 at net/core/skbuff.c:1451 napi_skb_cache_put+0x82/0x4b0
__warn+0x12f/0x340
napi_skb_cache_put+0x82/0x4b0
napi_skb_cache_put+0x82/0x4b0
report_bug+0x165/0x370
handle_bug+0x3d/0x80
exc_invalid_op+0x1a/0x50
asm_exc_invalid_op+0x1a/0x20
__free_old_xmit+0x1c8/0x510
napi_skb_cache_put+0x82/0x4b0
__free_old_xmit+0x1c8/0x510
__free_old_xmit+0x1c8/0x510
__pfx___free_old_xmit+0x10/0x10
The issue arises because virtio is assuming it's running in NAPI context
even when it's not, such as in the netpoll case.
To resolve this, modify virtnet_poll_tx() to only set NAPI when budget
is available. Same for virtnet_poll_cleantx(), which always assumed that
it was in a NAPI context.
Fixes: df133f3f96 ("virtio_net: bulk free tx skbs")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Link: https://patch.msgid.link/20240712115325.54175-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Shivani: Modified to apply on v6.6.y]
Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c8931ef55bd325052ec496f242aea7f6de47dc9c ]
Struct uvc_frame and interval (u32*) are packaged together on
streaming->formats on a single contiguous allocation.
Right now they are allocated right after uvc_format, without taking into
consideration their required alignment.
This is working fine because both structures have a field with a
pointer, but it will stop working when the sizeof() of any of those
structs is not a multiple of the sizeof(void*).
Enforce that alignment during the allocation.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240404-uvc-align-v2-1-9e104b0ecfbd@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4d31653c03b90e51515b1380115d1aedad925dd ]
Callers can pass null in filter (i.e. from returned from the function
wbscl_get_filter_coeffs_16p) and a null check is added to ensure that is
not the case.
This fixes 4 NULL_RETURNS issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b0ddf19cca2a352b2a7e01d99d3ba949a99c84c ]
BIOS images may fail to load and null checks are added before they are
used.
This fixes 6 NULL_RETURNS issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abf34ca465f5cd182b07701d3f3d369c0fc04723 ]
[why]
We set preferred link settings for virtual signal. However we don't support
virtual signal for UHBR link rate. If preferred is set to UHBR link rate, we
will allow virtual signal with UHBR link rate which causes system crashes.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad28d7c3d989fc5689581664653879d664da76f0 ]
[Why & How]
It actually exposes '6' types in enum dmub_notification_type. Not 5. Using smaller
number to create array dmub_callback & dmub_thread_offload has potential to access
item out of array bound. Fix it.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5236da757adc75d7e52c69bdc233d29249a0d0c ]
[Why]
These functions can be called from high IRQ levels and the OS will hang
if it tries to use a usleep_highres or a msleep.
[How]
Replace the flseep with a udelay for dmub_replay_enable.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d225960c2330e102370815367b877baaf8bb8b5d ]
We need to take the reset domain lock before talking to MES. While in
this case we can take the lock inside the mes helper. We can't do so for
most other mes helpers since they are used during reset. So for
consistency sake we add the lock here.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18f2525d31401e5142db95ff3a6ec0f4147be818 ]
We need to take the reset domain lock before flush hdp. We can't put the
lock inside amdgpu_device_flush_hdp itself because it is used during
reset where we already take the write side lock.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3948ad1ac582f560e1f3aeaecf384619921c48d ]
Accessing registers via host is missing the check for skip_hw_access and
the lockdep check that comes with it.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8bc14d116aeac8f0f133ec8d249acf4e0658da7 ]
Now that there are no indirect calls for PI processing there is no
way to dereference a NULL pointer here. Additionally drivers now always
freeze the queue (or in case of stacking drivers use their internal
equivalent) around changing the integrity profile.
This is effectively a revert of commit 3df49967f6 ("block: flush the
integrity workqueue in blk_integrity_unregister").
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240613084839.1044015-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4ec8dedca961db056ec85cb7ca8c9f7e2e92252 ]
Some callbacks from iio_info structure are accessed without any check, so
if a driver doesn't implement them trying to access the corresponding
sysfs entries produce a kernel oops such as:
[ 2203.527791] Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute
[...]
[ 2203.783416] Call trace:
[ 2203.783429] iio_read_channel_info_avail from dev_attr_show+0x18/0x48
[ 2203.789807] dev_attr_show from sysfs_kf_seq_show+0x90/0x120
[ 2203.794181] sysfs_kf_seq_show from seq_read_iter+0xd0/0x4e4
[ 2203.798555] seq_read_iter from vfs_read+0x238/0x2a0
[ 2203.802236] vfs_read from ksys_read+0xa4/0xd4
[ 2203.805385] ksys_read from ret_fast_syscall+0x0/0x54
[ 2203.809135] Exception stack(0xe0badfa8 to 0xe0badff0)
[ 2203.812880] dfa0: 00000003 b6f10f80 00000003 b6eab000 00020000 00000000
[ 2203.819746] dfc0: 00000003 b6f10f80 7ff00000 00000003 00000003 00000000 00020000 00000000
[ 2203.826619] dfe0: b6e1bc88 bed80958 b6e1bc94 b6e1bcb0
[ 2203.830363] Code: bad PC value
[ 2203.832695] ---[ end trace 0000000000000000 ]---
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://lore.kernel.org/r/20240530-iio-core-fix-segfault-v3-1-8b7cd2a03773@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c240c87bcd44a1a2375fc8ef8c645d1f1fe76466 ]
inode can be fuzzed, so it can has F2FS_INLINE_DATA flag and valid
i_blocks/i_nid value, this patch supports to do extra sanity check
to detect such corrupted state.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f12e26a194d0043441f870708093d9c2c3bad7d ]
Jiazi Li reported that they occasionally see hash table duplicates
as evidenced by the WARN_ON() in rb_insert_bss() in this code. It
isn't clear how that happens, nor have I been able to reproduce it,
but if it does happen, the kernel crashes later, when it tries to
unhash the entry that's now not hashed.
Try to make this situation more survivable by removing the BSS from
the list(s) as well, that way it's fully leaked here (as had been
the intent in the hash insert error path), and no longer reachable
through the list(s) so it shouldn't be unhashed again later.
Link: https://lore.kernel.org/r/20231026013528.GA24122@Jiazi.Li
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240607181726.36835-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2d79cc5455c891de6c93e1e0c73d806e299c54f ]
Check the return value of amd_smn_read() before saving a value. This
ensures invalid values aren't saved or used.
There are three cases here with slightly different behavior:
1) read_tempreg_nb_zen():
This is a function pointer which does not include a return code.
In this case, set the register value to 0 on failure. This
enforces Read-as-Zero behavior.
2) k10temp_read_temp():
This function does have return codes, so return the error code
from the failed register read. Continued operation is not
necessary, since there is no valid data from the register.
Furthermore, if the register value was set to 0, then the
following operation would underflow.
3) k10temp_get_ccd_support():
This function reads the same register from multiple CCD
instances in a loop. And a bitmask is formed if a specific bit
is set in each register instance. The loop should continue on a
failed register read, skipping the bit check.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240606-fix-smn-bad-read-v4-3-ffde21931c3f@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54e4ada1a4206f878e345ae01cf37347d803d1b1 ]
Remove list_del call in msgdma_chan_desc_cleanup, this should be the role
of msgdma_free_descriptor. In consequence replace list_add_tail with
list_move_tail in msgdma_free_descriptor.
This fixes the path:
msgdma_free_chan_resources -> msgdma_free_descriptors ->
msgdma_free_desc_list -> msgdma_free_descriptor
which does not correctly free the descriptors as first nodes were not
removed from the list.
Signed-off-by: Olivier Dautricourt <olivierdautricourt@gmail.com>
Tested-by: Olivier Dautricourt <olivierdautricourt@gmail.com>
Link: https://lore.kernel.org/r/20240608213216.25087-3-olivierdautricourt@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec4b5200c8af9ce021399d3192b3379c089396c3 ]
Commit 432928c937 ("gfs2: Add quota_change type") makes the incorrect
assertion that function do_qc() should behave differently in the two
contexts it is used in, but that isn't actually true. In all cases,
do_qc() grabs a "reference" when it starts using a slot in the per-node
quota changes file, and it releases that "reference" when no more
residual changes remain. Revert that broken commit.
There are some remaining issues with function do_qc() which are
addressed in the next commit.
This reverts commit 432928c937.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
