[ Upstream commit 08f399a818 ]
This is not a fix on its own but more a cleanup. Phy qmp pcie driver
currently have a workaround to handle pcs_misc not declared and add
0x400 offset to the pcs reg if pcs_misc is not declared.
Correctly declare pcs_misc reg and reduce PCS size to the common value
of 0x1f0 as done for every other qmp based pcie phy device.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221103212125.17156-2-ansuelsmth@gmail.com
Stable-dep-of: 5c0dbe8b0584 ("arm64: dts: qcom: ipq6018: fix clock rates for GCC_USB0_MOCK_UTMI_CLK")
Signed-off-by: Sasha Levin <sashal@kernel.org>
The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap). This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:
qcom/ipq6018-cp01-c1.dtb: hwlock: 'reg' is a required property
qcom/ipq6018-cp01-c1.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220909092035.223915-12-krzysztof.kozlowski@linaro.org
Current QUP peripheral labels like spi_0 and i2c_0 dont really tell what is
the exact QUP HW being used as there are actually 6 identical QUP HW blocks
for UART, SPI and I2C.
For example current i2c_0 label actually points to the QUP2 I2C HW.
This style of labeling does not follow what the rest of Qualcomm SoC-s use,
for example IPQ8074 which has the identical QUP blocks.
It also makes it really hard to add the missing QUP DT nodes as there are
multiple missing.
So utilize the same style as other Qualcomm SoC-s are using and update the
CP01 DTS as its the current sole user of them.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220604153003.55172-1-robimarko@gmail.com
There's no reason the timer needs > 32-bits of address or size.
Since we using 32-bit size, we need to define ranges properly.
Fixes warnings as:
```
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: timer@17c90000: #size-cells:0:0: 1 was expected
From schema: Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
```
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220626105800.35586-1-david@ixit.cz
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver changes for
5.18-rc1. For the most part it's been a quiet development cycle for
the USB core, but there are the usual "hot spots" of development
activity.
Included in here are:
- Thunderbolt driver updates:
- fixes for devices without displayport adapters
- lane bonding support and improvements
- other minor changes based on device testing
- dwc3 gadget driver changes.
It seems this driver will never be finished given that the IP core
is showing up in zillions of new devices and each implementation
decides to do something different with it...
- uvc gadget driver updates as more devices start to use and rely on
this hardware as well
- usb_maxpacket() api changes to remove an unneeded and unused
parameter.
- usb-serial driver device id updates and small cleanups
- typec cleanups and fixes based on device testing
- device tree updates for usb properties
- lots of other small fixes and driver updates.
All of these have been in linux-next for weeks with no reported
problems"
* tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
USB: new quirk for Dell Gen 2 devices
usb: dwc3: core: Add error log when core soft reset failed
usb: dwc3: gadget: Move null pinter check to proper place
usb: hub: Simplify error and success path in port_over_current_notify
usb: cdns3: allocate TX FIFO size according to composite EP number
usb: dwc3: Fix ep0 handling when getting reset while doing control transfer
usb: Probe EHCI, OHCI controllers asynchronously
usb: isp1760: Fix out-of-bounds array access
xhci: Don't defer primary roothub registration if there is only one roothub
USB: serial: option: add Quectel BG95 modem
USB: serial: pl2303: fix type detection for odd device
xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
xhci: Remove quirk for over 10 year old evaluation hardware
xhci: prevent U2 link power state if Intel tier policy prevented U1
xhci: use generic command timer for stop endpoint commands.
usb: host: xhci-plat: omit shared hcd if either root hub has no ports
usb: host: xhci-plat: prepare operation w/o shared hcd
usb: host: xhci-plat: create shared hcd after having added main hcd
xhci: prepare for operation w/o shared hcd
xhci: factor out parts of xhci_gen_setup()
...
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 5.18-rc1.
Nothing major in here, just lots of little improvements and cleanups
and new device support. Highlights are:
- list iterator fixups for when we walk past the end of the list (a
common problem that was cut/pasted in almost all USB gadget
drivers)
- xen USB driver "hardening" for malicious hosts
- xhci driver updates and fixes for more hardware types
- xhci debug cable fixes to make it actually work again
- usb gadget audio driver improvements
- usb gadget storage fixes to work with OS-X
- lots of other small usb gadget fixes and updates
- USB DWC3 driver improvements for more hardware types
- Lots of other small USB driver improvements
- DTS updates for some USB platforms
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue()
dt-bindings: usb: mtk-xhci: add compatible for mt8186
usb: dwc3: Issue core soft reset before enabling run/stop
usb: gadget: Makefile: remove ccflags-y
USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
usb: gadget: eliminate anonymous module_init & module_exit
usb: usbip: eliminate anonymous module_init & module_exit
xen/usb: harden xen_hcd against malicious backends
usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue
usb: dwc3: gadget: move cmd_endtransfer to extra function
usb: dwc3: gadget: ep_queue simplify isoc start condition
xen/usb: don't use arbitrary_virt_to_machine()
usb: isp1760: remove redundant max_packet() macro
usb: oxu210hp-hcd: remove redundant call to max_packet() macro
usb: common: usb-conn-gpio: Make VBUS supply completely optional
USB: storage: ums-realtek: fix error code in rts51x_read_mem()
usb: early: xhci-dbc: Fix xdbc number parsing
usb: early: xhci-dbc: Remove duplicate keep parsing
x86/tsc: Be consistent about use_tsc_delay()
usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body
...
'qcom,config-pipe-trust-reg' property doesn't seem to be
used by the qcom, bam_dma driver, so remove the same
from 'ipq6018' dts.
This is a preparatory patch for subsequent patch in
this series which converts the qcom_bam_dma device-tree
binding into YAML format.
Without this change, 'make dtbs_check' leads to the following
error:
$ arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml:
dma-controller@704000: 'qcom,config-pipe-trust-reg' does not match
any of the regexes: 'pinctrl-[0-9]+'
Fix the same.
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211013105541.68045-3-bhupesh.sharma@linaro.org
Many child nodes of QMP PHY are named without following bindings schema
and causing dtbs_check warnings like below.
phy@1c06000: 'lane@1c06800' does not match any of the regexes: '^phy@[0-9a-f]+$'
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dt.yaml
Correct them to fix the warnings.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-5-shawn.guo@linaro.org
The dwc3 usb nodes in several arm64 qcom dts are currently named
differently, somewhere as 'usb@<addr>' and somewhere as 'dwc3@<addr>',
leading to some confusion when one sees the entries in sysfs or
dmesg:
[ 1.943482] dwc3 a600000.usb: Adding to iommu group 1
[ 2.266127] dwc3 a800000.dwc3: Adding to iommu group 2
Name the usb nodes as 'usb@<addr>' for consistency, which is
the correct convention as per the 'snps,dwc3' dt-binding as
well (see [1]).
[1]. Documentation/devicetree/bindings/usb/snps,dwc3.yaml
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20210627114616.717101-2-bhupesh.sharma@linaro.org
[bjorn: Extended to also fix ipq6018]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Qualcomm DT updates for 5.11
This adds support for SD card, WiFi, LED, touchscreeni, touchkey and
fuel gauge to the Samsung Galaxy S5. Nexus 5 also gains fuel gauge
support.
Finally IPQ6016 gains support for the QPIC NAND controller.
* tag 'qcom-dts-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: ipq6018: Add the QPIC peripheral nodes
ARM: dts: qcom-pma8084: Drop incorrect use of io-channel-ranges
ARM: dts: qcom: msm8974-lge-nexus5: Add fuel gauge
ARM: dts: qcom: msm8974-klte: Add fuel gauge
ARM: dts: qcom: msm8974-klte: Add support for SD card
ARM: dts: qcom: msm8974-klte: Add support for wifi
ARM: dts: qcom: msm8974-klte: Add gpio expander chip
ARM: dts: qcom: msm8974-klte: Add support for led
ARM: dts: qcom: msm8974-klte: Add support for touchscreen
ARM: dts: qcom: msm8974-klte: Add support for touchkey
ARM: dts: qcom: msm8974-klte: Merge pinctrl nodes
Link: https://lore.kernel.org/r/20201130190148.345302-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The scripts/dtc/checks.c requires that the node have empty "dma-ranges"
property must have the same "#address-cells" and "#size-cells" values as
the parent node. Otherwise, the following warnings is reported:
arch/arm64/boot/dts/qcom/ipq6018.dtsi:185.3-14: Warning \
(dma_ranges_format): /soc:dma-ranges: empty "dma-ranges" property but \
its #address-cells (1) differs from / (2)
arch/arm64/boot/dts/qcom/ipq6018.dtsi:185.3-14: Warning \
(dma_ranges_format): /soc:dma-ranges: empty "dma-ranges" property but \
its #size-cells (1) differs from / (2)
Arnd Bergmann figured out why it's necessary:
Also note that the #address-cells=<1> means that any device under
this bus is assumed to only support 32-bit addressing, and DMA will
have to go through a slow swiotlb in the absence of an IOMMU.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20201016090833.1892-3-thunder.leizhen@huawei.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
