PD#TV-7462
Problem:
after afc adjusts freq and stable, sync to settings to get freq.
Solution:
1.after afc adjusts freq and stable, sync to settings to get freq.
Verify:
Verified by x301
Change-Id: Id78a7f974345fd428f9bb185c36fcbe7b93f4ac2
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#TV-7335
Problem:
add nicam detection when current signal fm-mono change to nicam.
Solution:
1.add nicam detection when current signal fm-mono change to nicam.
Verify:
Verified by x301
Change-Id: If2e35d018d2df803c5458cc93974352b06e90a11
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-9934
Problem:
1.audio control calls crash on a non-tl1 platform.
1.fix atv audio control interface.
Solution:
1.fix atv audio control interface.
Verify:
Verified by r311 and x301.
Change-Id: Ib6d58cec96e7d57e1bfd8ae18524dcb5517c317e
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#TV-6044, PD#TV-6047
Problem:
ATV sound output has noise when input non standard signal.
Solution:
1.fix atv non standard signal audio handle.
2.remove atv audio source selection in audio module.
3.atv demod selects audio source according to signal.
4.atv demod version: V2.12.
Verify:
Verified by x301
Change-Id: Ie0fce492f1ce7f5a5866d8674c95c97ee32452c0
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-5661, PD#SWPL-5659
Problem:
1.add gain register to control the L and R channel audio gain.
2.add atv interrupt for signal lock and unlock.
Solution:
1.add gain register to control the L and R channel audio gain.
2.add atv interrupt for signal lock and unlock.
Verify:
verified by ab301 and ab311.
Change-Id: I8a7cbe538939dd9418e27165d4c83a8f473f119b
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Conflicts:
arch/arm64/boot/dts/amlogic/tm2_t962x3_ab301.dts
PD#TV-6452, PD#TV-6643, PD#TV-6144
Problem:
fix frequency closer when channel searching.
Solution:
1.fix frequency closer when channel searching.
2.Frequency offset cause errors in CVBS or audio recognition.
Verify:
Verified by x301
Change-Id: Ieab13a5b5d8d901cfc61ea09e5e47eb9e938bf34
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#TV-4274
Problem:
fix audio config (PAL_M, NTSC_M) when video is PAL.
Solution:
fix audio config (PAL_M, NTSC_M) when video is PAL
Verify:
verified by x301.
Change-Id: I9be8d71d52a226b6422317be0b77ca6331f23147
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-6165
Problem:
TL1 vdee power too high when shutdown
Solution:
close bandgap when shut down for tl1
close vafe ctrl
close adc pll
Verify:
X301
Change-Id: I374bbe09ecdd456ea07f1fda3391acd4ab0bc949
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Conflicts:
drivers/amlogic/media/vout/vdac/vdac_dev.c
PD#TV-1539
Problem:
modify atv demod support multi tuner load.
Solution:
1.add fine tune.
2.add set/get if info.
3.add tuner type set/get.
4.add multi tuner config in dts.
5.atv demod ver: V2.09.
Verify:
verified by x301
Change-Id: I23328bfab3d3508db67cef3e327002563eb1a87e
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-2297, PD#SWPL-5450, PD#TV-2311
Problem:
Fix ATV audio output noise when switching channels to play.
Solution:
1.Add the judgment of SNR to prevent the weak signal
from entering the OV mode.
2.Wait for the signal to be completely stable before OV detection.
3.OV detection is turned off by default,
and will be turned on again when non-standard signals are encountered.
4.The OV detection moves from afc timer to monitor.
5.Optimize detection of A2/FM.
6.atv demod ver: V2.08.
Verify:
verified by x301
Change-Id: I3064230472ce51e1192a2d08ef6cc6f4ba10abaa
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#TV-1549, PD#TV-2829, PD#TV-2830
Problem:
Fix non standard for analog signal.
Solution:
1.Add non standard config 3 for analog signal.
2.Fix non standard default value.
3.Fix audio control register an bits.
4.After correcting the frequency offset success,
reset tuner to prevent audio from identifying errors.
Verify:
verified by x301
Change-Id: I65335dbe9ce9dc66d4ccaae3c1ff591660790616
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-3395
Problem:
recognized fsc358 flag when signal weak
Solution:
increase fsc358-flag recognized threshold
avoid fsc443 be recognized as fsc358
Verify:
verify on x301
Change-Id: I7b759bd0621c153e5abd3dee8fdf55a2426400a7
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
PD#SWPL-4421
Problem:
Tuner crashes easily when fast fine tune
Solution:
Delay afc work to prevent tuner crash
Verify:
verified by x301
Change-Id: I011f7c3f71a30f95a9b7aa371d5fabe71f249051
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-3440
Problem:
ATV switch to other source, such as DTV/HDMI/AV, no sound
Solution:
ATV switch to other source, atv demond is disabled when
audio is reading data, so it's blocked.
In normal, ATV sends audio data to FRATV,
then FRATV sends data to audio fifo, then to DDR.
If ATV stops to send audio data, no interrupt from FRATV to fifo,
no data is updated to DDR.
When exit from audio atv patch, it's a block signal to
wait in_read finished, but ATV is disabled
TimeCheckThread will check any routine is blocked,
if there is one, signal SIGABRT would rise and cause audio server restart
So we make a delay before ATV is disabled to waiting audio data is readed.
Verify:
x301
Change-Id: I47dc88d2c8565c16c739ffea69a88152fa4d5f13
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
PD#SWPL-2295
Problem:
1.modify atv demod code for coverity.
2.add ntsc-m ring filter for t962x2.
3.merge code optimization from android l.
4.add tuner compatible info in dts for tuner debug.
Solution:
1.modify atv demod code for coverity.
2.add ntsc-m ring filter for t962x2.
3.merge code optimization from android l.
4.add tuner compatible info in dts for tuner debug.
Verify:
verified by einstein
Change-Id: I9696aa628315ee11f0c9dd279c7cc03797f04331
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-4078
Problem:
Need porting ircut driver for ipc camera.
Solution:
Add ircut driver.
ircut auto on/off by light in sensor.
Verify:
Verify on W411 platform.
Change-Id: I4f20f0a1e117e8e4e7f94dead6a65f243169827f
Signed-off-by: Dianzhong Huo <dianzhong.huo@amlogic.com>
commit 1fad17fb1b upstream.
If wakeup_source_add() is called right after wakeup_source_remove()
for the same wakeup source, timer_setup() may be called for a
potentially scheduled timer which is incorrect.
To avoid that, move the wakeup source timer cancellation from
wakeup_source_drop() to wakeup_source_remove().
Moreover, make wakeup_source_remove() clear the timer function after
canceling the timer to let wakeup_source_not_registered() treat
unregistered wakeup sources in the same way as the ones that have
never been registered.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.4+ <stable@vger.kernel.org> # 4.4+
[ rjw: Subject, changelog, merged two patches together ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change-Id: Iae10e0d836e4933ef0311c72508c5cf246bbe437
PD#TV-10472
Problem:
When system on, enter freeze mode lead to flush deferd probe.
Init.rc also run insmod in parallel, if insmod task
atomic_inc(&probe_count), and this task is freezed,
deadlock happends.
Solution:
Move flush deferd probe action before freeze task
Verify:
X32A0-T972
Change-Id: I8949db32aea14e2da37e77658a9c999af39e2c83
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
PD#OTT-6799
Problem:
In case the target node requests a security context, the
extra_buffers_size is increased with the size of the security context.
But, that size is not available for use by regular scatter-gather
buffers;
Solution:
make sure the ending of that buffer is marked correctly.
Verify:
Raven
Change-Id: I896f86a92a4b937a7a731ce9839ff53a700b298a
Signed-off-by: Martijn Coenen <maco at android.com>
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
PD#OTT-5999
[Problem]
In binder_transaction of binder.c, there is a possible out of bounds
write due to an integer overflow. This could lead to local escalation of
privilege with noadditional execution privileges needed. User interaction
is needed for exploitation.
The fix is designed to check for the integer overflow.
[Solution]
UPSTREAM: binder: check for overflow when alloc for security context
commit 0b0509508b upstream.
When allocating space in the target buffer for the security context,
make sure the extra_buffers_size doesn't overflow. This can only
happen if the given size is invalid, but an overflow can turn it
into a valid size. Fail the transaction if an overflow is detected.
Bug: 130571081
Change-Id: Ibaec652d2073491cc426a4a24004a848348316bf
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
PD#TV-11316
[ Upstream commit 583e636141 ]
We always program the maximum DMA buffer size into the receive descriptor,
although the allocated size may be less. E.g. with the default MTU size
we allocate only 1536 bytes. If somebody sends us a bigger frame, then
memory may get corrupted.
Fix by using exact buffer sizes.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Change-Id: I32f3f0758ee6df0217dd9d1275c08b04163d811b
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#TV-11316
[ Upstream commit 07b3975352 ]
Currently, if we drop a packet, we exit from NAPI loop before the budget
is consumed. In some situations this will make the RX processing stall
e.g. when flood pinging the system with oversized packets, as the
errorneous packets are not dropped efficiently.
If we drop a packet, we should just continue to the next one as long as
the budget allows.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Change-Id: Ib13615c2e413af86519c1cec0a6638b88ceaf4de
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#SWPL-12602
Problem:
omni phy can not connect network probably
after long stress suspend test
for gxl/txl/txlx
Solution:
In suspend/resume sequeue, add eth reset
Verify:
verify on p212/r311
Change-Id: I4b6ab34eb2eae40533f4a33db8fb40a00f5b3d51
Signed-off-by: qi duan <qi.duan@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/axg_s400_v03gva_sbr.dts
arch/arm/boot/dts/amlogic/axg_s400_v03sbr.dts
arch/arm/boot/dts/amlogic/gxl_p281_1g.dts
arch/arm/boot/dts/amlogic/gxl_p281_2g.dts
arch/arm64/boot/dts/amlogic/axg_s400_v03gva_sbr.dts
arch/arm64/boot/dts/amlogic/axg_s400_v03sbr.dts
arch/arm64/boot/dts/amlogic/gxl_p212_2g_drm_buildroot.dts
arch/arm64/boot/dts/amlogic/gxl_p281_1g.dts
arch/arm64/boot/dts/amlogic/gxl_p281_2g.dts
PD#SWPL-13177
Problem:
stop endpoint race
Solution:
A counter was used to find out if the stop endpoint completion raced with
the stop endpoint timeout timer. This was needed in case the stop ep
completion failed to delete the timer as it was running on anoter cpu.
The EP_STOP_CMD_PENDING flag was not enough as a new stop endpoint command
may be queued between the command completion and timeout function, which
would set the flag back.
Instead of the separate counter that was used we can detect the race by
checking both the STOP_EP_PENDING flag and timer_pending in the timeout
function.
Verify:
franklin
Change-Id: Ie958ffd530a6bd176d0cf451894a5bd4dece38da
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
PD#SWPL-15901
Problem:
In usb_destroy_configuration of config.c, there is a possible
out of bounds write due to a missing bounds check. This could
lead to local escalation of privilege with no additional execution
privileges needed. User interaction is not needed for exploitation.
Solution:
The fix is designed to make sure the driver only frees as many
configurations and interfaces as it could have allocated.
Platform:
Raven
Verify:
Raven
Change-Id: I4a3d2ad27d09e606d4e363a75ce09a2e2fcf0070
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
