[ Upstream commit fcd5ce4b39 ]
In dvb_create_media_entity(), 'dvbdev->entity' is allocated through
kzalloc(). Then, 'dvbdev->pads' is allocated through kcalloc(). However, if
kcalloc() fails, the allocated 'dvbdev->entity' is not deallocated, leading
to a memory leak bug. To fix this issue, free 'dvbdev->entity' before
returning -ENOMEM.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 692117c1f7 ]
Warning when p == NULL and then proceeding and dereferencing p does not
make any sense as the kernel will crash with a NULL pointer dereference
right away.
Bailing out when p == NULL and returning an error code does not cure the
underlying problem which caused p to be NULL. Though it might allow to
do proper debugging.
Same applies to the clock id check in set_process_cpu_timer().
Clean them up and make them return without trying to do further damage.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20190819143801.846497772@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c268e7adea ]
KASAN: global-out-of-bounds Read in dvb_pll_attach
Syzbot reported global-out-of-bounds Read in dvb_pll_attach, while
accessing id[dvb_pll_devcount], because dvb_pll_devcount was 65,
that is more than size of 'id' which is DVB_PLL_MAX(64).
Rather than increasing dvb_pll_devcount every time, use ida so that
numbers are allocated correctly. This does mean that no more than
64 devices can be attached at the same time, but this is more than
sufficient.
usb 1-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the
software demuxer
dvbdev: DVB: registering new adapter (774 Friio White ISDB-T USB2.0)
usb 1-1: media controller created
dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
tc90522 0-0018: Toshiba TC90522 attached.
usb 1-1: DVB: registering adapter 0 frontend 0 (Toshiba TC90522 ISDB-T
module)...
dvbdev: dvb_create_media_entity: media entity 'Toshiba TC90522 ISDB-T
module' registered.
==================================================================
BUG: KASAN: global-out-of-bounds in dvb_pll_attach+0x6c5/0x830
drivers/media/dvb-frontends/dvb-pll.c:798
Read of size 4 at addr ffffffff89c9e5e0 by task kworker/0:1/12
CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.2.0-rc6+ #13
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xca/0x13e lib/dump_stack.c:113
print_address_description+0x67/0x231 mm/kasan/report.c:188
__kasan_report.cold+0x1a/0x32 mm/kasan/report.c:317
kasan_report+0xe/0x20 mm/kasan/common.c:614
dvb_pll_attach+0x6c5/0x830 drivers/media/dvb-frontends/dvb-pll.c:798
dvb_pll_probe+0xfe/0x174 drivers/media/dvb-frontends/dvb-pll.c:877
i2c_device_probe+0x790/0xaa0 drivers/i2c/i2c-core-base.c:389
really_probe+0x281/0x660 drivers/base/dd.c:509
driver_probe_device+0x104/0x210 drivers/base/dd.c:670
__device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777
bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
__device_attach+0x217/0x360 drivers/base/dd.c:843
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
device_add+0xae6/0x16f0 drivers/base/core.c:2111
i2c_new_client_device+0x5b3/0xc40 drivers/i2c/i2c-core-base.c:778
i2c_new_device+0x19/0x50 drivers/i2c/i2c-core-base.c:821
dvb_module_probe+0xf9/0x220 drivers/media/dvb-core/dvbdev.c:985
friio_tuner_attach+0x125/0x1d0 drivers/media/usb/dvb-usb-v2/gl861.c:536
dvb_usbv2_adapter_frontend_init
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:675 [inline]
dvb_usbv2_adapter_init drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:804
[inline]
dvb_usbv2_init drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:865 [inline]
dvb_usbv2_probe.cold+0x24dc/0x255d
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:980
usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
really_probe+0x281/0x660 drivers/base/dd.c:509
driver_probe_device+0x104/0x210 drivers/base/dd.c:670
__device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777
bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
__device_attach+0x217/0x360 drivers/base/dd.c:843
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
device_add+0xae6/0x16f0 drivers/base/core.c:2111
usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023
generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210
usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266
really_probe+0x281/0x660 drivers/base/dd.c:509
driver_probe_device+0x104/0x210 drivers/base/dd.c:670
__device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777
bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
__device_attach+0x217/0x360 drivers/base/dd.c:843
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
device_add+0xae6/0x16f0 drivers/base/core.c:2111
usb_new_device.cold+0x8c1/0x1016 drivers/usb/core/hub.c:2534
hub_port_connect drivers/usb/core/hub.c:5089 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
port_event drivers/usb/core/hub.c:5350 [inline]
hub_event+0x1ada/0x3590 drivers/usb/core/hub.c:5432
process_one_work+0x905/0x1570 kernel/workqueue.c:2269
process_scheduled_works kernel/workqueue.c:2331 [inline]
worker_thread+0x7ab/0xe20 kernel/workqueue.c:2417
kthread+0x30b/0x410 kernel/kthread.c:255
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
The buggy address belongs to the variable:
id+0x100/0x120
Memory state around the buggy address:
ffffffff89c9e480: fa fa fa fa 00 00 fa fa fa fa fa fa 00 00 00 00
ffffffff89c9e500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> ffffffff89c9e580: 00 00 00 00 00 00 00 00 00 00 00 00 fa fa fa fa
^
ffffffff89c9e600: 04 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa
ffffffff89c9e680: 04 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa
==================================================================
Reported-by: syzbot+8a8f48672560c8ca59dd@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 887e975c41 ]
Fix bug added with the patch:
commit 8f3ea35929
Author: Josef Bacik <josef@toxicpanda.com>
Date: Mon Jul 16 12:11:35 2018 -0400
nbd: handle unexpected replies better
where if the timeout handler runs when the completion path is and we fail
to grab the mutex in the timeout handler we will leave a config reference
and cannot free the config later.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60e2dde1e9 ]
In led_trigger_set(), 'event' is allocated in kasprintf(). However, it is
not deallocated in the following execution if the label 'err_activate' or
'err_add_groups' is entered, leading to memory leaks. To fix this issue,
free 'event' before returning the error.
Fixes: 52c47742f7 ("leds: triggers: send uevent when changing triggers")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7df8f9a201 ]
The BCLK divider should be calculated using the parameters that actually
make the BCLK rate: the number of channels, the sampling rate and the
sample width.
We've been using the oversample_rate previously because in the former SoCs,
the BCLK's parent is MCLK, which in turn is being used to generate the
oversample rate, so we end up with something like this:
oversample = mclk_rate / sampling_rate
bclk_div = oversample / word_size / channels
So, bclk_div = mclk_rate / sampling_rate / word_size / channels.
And this is actually better, since the oversampling ratio only plays a role
because the MCLK is its parent, not because of what BCLK is supposed to be.
Furthermore, that assumption of MCLK being the parent has been broken on
newer SoCs, so let's use the proper formula, and have the parent rate as an
argument.
Fixes: 7d2993811a ("ASoC: sun4i-i2s: Add support for H3")
Fixes: 21faaea134 ("ASoC: sun4i-i2s: Add support for A83T")
Fixes: 66ecce3325 ("ASoC: sun4i-i2s: Add compatibility with A64 codec I2S")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/c3595e3a9788c2ef2dcc30aa3c8c4953bb5cc249.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42fc2e9ef9 ]
We were getting the file by luck, from one of the paths in -I, fix it to
get it from the proper place:
$ cd tools/include/uapi/asm/
[acme@quaco asm]$ grep include bitsperlong.h
#include "../../arch/x86/include/uapi/asm/bitsperlong.h"
#include "../../arch/arm64/include/uapi/asm/bitsperlong.h"
#include "../../arch/powerpc/include/uapi/asm/bitsperlong.h"
#include "../../arch/s390/include/uapi/asm/bitsperlong.h"
#include "../../arch/sparc/include/uapi/asm/bitsperlong.h"
#include "../../arch/mips/include/uapi/asm/bitsperlong.h"
#include "../../arch/ia64/include/uapi/asm/bitsperlong.h"
#include "../../arch/riscv/include/uapi/asm/bitsperlong.h"
#include "../../arch/alpha/include/uapi/asm/bitsperlong.h"
#include <asm-generic/bitsperlong.h>
$ ls -la ../../arch/x86/include/uapi/asm/bitsperlong.h
ls: cannot access '../../arch/x86/include/uapi/asm/bitsperlong.h': No such file or directory
$ ls -la ../../../arch/*/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 237 ../../../arch/alpha/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 841 ../../../arch/arm64/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 966 ../../../arch/hexagon/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 234 ../../../arch/ia64/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 100 ../../../arch/microblaze/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 244 ../../../arch/mips/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 352 ../../../arch/parisc/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 312 ../../../arch/powerpc/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 353 ../../../arch/riscv/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 292 ../../../arch/s390/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 323 ../../../arch/sparc/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 320 ../../../arch/x86/include/uapi/asm/bitsperlong.h
$
Found while fixing some other problem, before it was escaping the
tools/ chroot and using stuff in the kernel sources:
CC /tmp/build/perf/util/find_bit.o
In file included from /git/linux/tools/include/../../arch/x86/include/uapi/asm/bitsperlong.h:11,
from /git/linux/tools/include/uapi/asm/bitsperlong.h:3,
from /git/linux/tools/include/linux/bits.h:6,
from /git/linux/tools/include/linux/bitops.h:13,
from ../lib/find_bit.c:17:
# cd /git/linux/tools/include/../../arch/x86/include/uapi/asm/
# pwd
/git/linux/arch/x86/include/uapi/asm
#
Now it is getting the one we want it to, i.e. the one inside tools/:
CC /tmp/build/perf/util/find_bit.o
In file included from /git/linux/tools/arch/x86/include/uapi/asm/bitsperlong.h:11,
from /git/linux/tools/include/linux/bits.h:6,
from /git/linux/tools/include/linux/bitops.h:13,
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8f8cfqywmf6jk8a3ucr0ixhu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c372a35550 ]
When transitioning to supend state, uniphier_aio_dai_suspend() is called
and asserts reset lines and disables clocks.
However, if there are two or more DAIs, uniphier_aio_dai_suspend() are
called multiple times, and double reset assersion will cause.
This patch defines the counter that has the number of DAIs at first, and
whenever uniphier_aio_dai_suspend() are called, it decrements the
counter. And only if the counter is zero, it asserts reset lines and
disables clocks.
In the same way, uniphier_aio_dai_resume() are called, it increments the
counter after deasserting reset lines and enabling clocks.
Fixes: 139a342002 ("ASoC: uniphier: add support for UniPhier AIO CPU DAI driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1566281764-14059-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a95fbda08e ]
Force HS200 by masking bit 63 of the SDHCI capability register.
The i.MX ESDHC driver uses SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400. With
that the stack checks bit 63 to descide whether HS400 is available.
Using sdhci-caps-mask allows to mask bit 63. The stack then selects
HS200 as operating mode.
This prevents rare communication errors with minimal effect on
performance:
sdhci-esdhc-imx 30b60000.usdhc: warning! HS400 strobe DLL
status REF not lock!
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9846a4524a ]
Recent changes to the atheros at803x driver caused
ethernet to stop working on this board.
In particular commit 6d4cd041f0
("net: phy: at803x: disable delay only for RGMII mode")
and commit cd28d1d6e5
("net: phy: at803x: Disable phy delay for RGMII mode")
fix the AR8031 driver to configure the phy's (RX/TX)
delays as per the 'phy-mode' in the device tree.
This now prevents ethernet from working on this board.
It used to work before those commits, because the
AR8031 comes out of reset with RX delay enabled, and
the at803x driver didn't touch the delay configuration
at all when "rgmii" mode was selected, and because
arch/arm/mach-imx/mach-imx7d.c:ar8031_phy_fixup()
unconditionally enables TX delay.
Since above commits ar8031_phy_fixup() also has no
effect anymore, and the end-result is that all delays
are disabled in the phy, no ethernet.
Update the device tree to restore functionality.
Signed-off-by: André Draszik <git@andred.net>
CC: Ilya Ledvich <ilya@compulab.co.il>
CC: Igor Grinberg <grinberg@compulab.co.il>
CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Pengutronix Kernel Team <kernel@pengutronix.de>
CC: Fabio Estevam <festevam@gmail.com>
CC: NXP Linux Team <linux-imx@nxp.com>
CC: devicetree@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94c0439022 ]
Since commit d3b41b6bb4 ("m68k: Dispatch nvram_ops calls to Atari or
Mac functions"), Coldfire builds generate compiler warnings due to the
unconditional inclusion of asm/atarihw.h and asm/macintosh.h.
The inclusion of asm/atarihw.h causes warnings like this:
In file included from ./arch/m68k/include/asm/atarihw.h:25:0,
from arch/m68k/kernel/setup_mm.c:41,
from arch/m68k/kernel/setup.c:3:
./arch/m68k/include/asm/raw_io.h:39:0: warning: "__raw_readb" redefined
#define __raw_readb in_8
In file included from ./arch/m68k/include/asm/io.h:6:0,
from arch/m68k/kernel/setup_mm.c:36,
from arch/m68k/kernel/setup.c:3:
./arch/m68k/include/asm/io_no.h:16:0: note: this is the location of the previous definition
#define __raw_readb(addr) \
...
This issue is resolved by dropping the asm/raw_io.h include. It turns out
that asm/io_mm.h already includes that header file.
Moving the relevant macro definitions helps to clarify this dependency
and make it safe to include asm/atarihw.h.
The other warnings look like this:
In file included from arch/m68k/kernel/setup_mm.c:48:0,
from arch/m68k/kernel/setup.c:3:
./arch/m68k/include/asm/macintosh.h:19:35: warning: 'struct irq_data' declared inside parameter list will not be visible outside of this definition or declaration
extern void mac_irq_enable(struct irq_data *data);
^~~~~~~~
...
This issue is resolved by adding the missing linux/irq.h include.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de6f97b2ba ]
compile-testing this driver on other architectures showed
multiple warnings:
drivers/net/ethernet/nxp/lpc_eth.c: In function 'lpc_eth_drv_probe':
drivers/net/ethernet/nxp/lpc_eth.c:1337:19: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=]
drivers/net/ethernet/nxp/lpc_eth.c:1342:19: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=]
Use format strings that work on all architectures.
Link: https://lore.kernel.org/r/20190809144043.476786-10-arnd@arndb.de
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d5078c717 ]
Not all sensors will be able to guarantee a proper initial state.
This may be either because the driver is not properly written,
or (probably unlikely) because the hardware won't support it.
While the right solution in the former case is to fix the sensor
driver, the real world not always allows right solutions, due to lack
of available documentation and support on these sensors.
Let's relax this requirement, and allow the driver to support stream start,
even if the sensor initial sequence wasn't the expected.
Also improve the warning message to better explain the problem and provide
a hint that the sensor driver needs to be fixed.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ef57be07a ]
The streaming state should be set to the first upstream sub-device only,
not everywhere, for a sub-device driver itself knows how to best control
the streaming state of its own upstream sub-devices.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 092e8eb90a ]
This is mostly a port of Jacopo's fix:
commit aa4bb8b883
Author: Jacopo Mondi <jacopo@jmondi.org>
Date: Fri Jul 6 05:51:52 2018 -0400
media: ov5640: Re-work MIPI startup sequence
In the OV5645 case, the changes are:
- At set_power(1) time power up MIPI Tx/Rx and set data and clock lanes in
LP11 during 'sleep' and 'idle' with MIPI clock in non-continuous mode.
- At set_power(0) time power down MIPI Tx/Rx (in addition to the current
power down of regulators and clock gating).
- At s_stream time enable/disable the MIPI interface output.
With this commit the sensor is able to enter LP-11 mode during power up,
as expected by some CSI-2 controllers.
Many thanks to Fabio Estevam for his help debugging this issue.
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a4d8fb229 ]
Same as in the commit 0176622953 ("perf record: Support s390 random
socket_id assignment"), aarch64 also have this problem.
Without this fix:
[root@localhost perf]# ./perf report --header -I -v
...
socket_id number is too big.You may need to upgrade the perf tool.
# ========
# captured on : Thu Aug 1 22:58:38 2019
# header version : 1
...
# Core ID and Socket ID information is not available
...
With this fix:
[root@localhost perf]# ./perf report --header -I -v
...
cpumask list: 0-31
cpumask list: 32-63
cpumask list: 64-95
cpumask list: 96-127
# ========
# captured on : Thu Aug 1 22:58:38 2019
# header version : 1
...
# CPU 0: Core ID 0, Socket ID 36
# CPU 1: Core ID 1, Socket ID 36
...
# CPU 126: Core ID 126, Socket ID 8442
# CPU 127: Core ID 127, Socket ID 8442
...
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Link: http://lkml.kernel.org/r/1564717737-21602-1-git-send-email-tanxiaojun@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00c9755524 ]
When compile-testing on other architectures, we get lots of warnings
about incorrect format strings, like:
drivers/dma/iop-adma.c: In function 'iop_adma_alloc_slots':
drivers/dma/iop-adma.c:307:6: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=]
drivers/dma/iop-adma.c: In function 'iop_adma_prep_dma_memcpy':
>> drivers/dma/iop-adma.c:518:40: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=]
Use %zu for printing size_t as required, and cast the dma_addr_t
arguments to 'u64' for printing with %llx. Ideally this should use
the %pad format string, but that requires an lvalue argument that
doesn't work here.
Link: https://lore.kernel.org/r/20190809163334.489360-3-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b20a6e298b ]
Allow selecting the IR protocol, MCE or iMON, for a device that
identifies as follows (with config id 0x7e):
15c2:ffdc SoundGraph Inc. iMON PAD Remote Controller
As the driver is structured to default to iMON when both RC
protocols are supported, existing users of this device (using MCE
protocol) will need to manually switch to MCE (RC-6) protocol from
userspace (with ir-keytable, sysfs).
Signed-off-by: Darius Rad <alpha@area49.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fd2293856 ]
When support for the IPMMU is not enabled, the FDP driver may be
probe-deferred multiple times, causing several messages to be printed
like:
rcar_fdp1 fe940000.fdp1: FCP not found (-517)
rcar_fdp1 fe944000.fdp1: FCP not found (-517)
Fix this by reducing the message level to debug level, as is done in the
VSP1 driver.
Fixes: 4710b752e0 ("[media] v4l: Add Renesas R-Car FDP1 Driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 864919ea03 ]
of_get_next_child() increments the reference count of the returning
device_node. Decrement it in the check if we are using the old or the
new DTB.
Fixes: ba1f1f70c2 ("[media] media: mtk-mdp: Fix mdp device tree")
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Houlong Wei <houlong.wei@mediatek.com>
[hverkuil-cisco@xs4all.nl: use node instead of parent as temp variable]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fe94ce1c6 ]
To get the expected output we have to ignore whatever changes the user
has in its ~/.perfconfig file, so set PERF_CONFIG to /dev/null to
achieve that.
Before:
# egrep 'trace|show_' ~/.perfconfig
[trace]
show_zeros = yes
show_duration = no
show_timestamp = no
show_arg_names = no
show_prefix = yes
# echo $PERF_CONFIG
# perf test "trace + vfs_getname"
70: Check open filename arg using perf trace + vfs_getname: FAILED!
# export PERF_CONFIG=/dev/null
# perf test "trace + vfs_getname"
70: Check open filename arg using perf trace + vfs_getname: Ok
#
After:
# egrep 'trace|show_' ~/.perfconfig
[trace]
show_zeros = yes
show_duration = no
show_timestamp = no
show_arg_names = no
show_prefix = yes
# echo $PERF_CONFIG
# perf test "trace + vfs_getname"
70: Check open filename arg using perf trace + vfs_getname: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: https://lkml.kernel.org/n/tip-3up27pexg5i3exuzqrvt4m8u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61a461fcbd ]
We had this comment in Documentation/perf_counter/config.c, i.e. since
when we got this from the git sources, but never really did that
getenv("PERF_CONFIG"), do it now as I need to disable whatever
~/.perfconfig root has so that tests parsing tool output are done for
the expected default output or that we specify an alternate config file
that when read will make the tools produce expected output.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Fixes: 0780060124 ("perf_counter tools: add in basic glue from Git")
Link: https://lkml.kernel.org/n/tip-jo209zac9rut0dz1rqvbdlgm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e78a7614f3 ]
Scheduling-clock interrupts can arrive late in the CPU-offline process,
after idle entry and the subsequent call to cpuhp_report_idle_dead().
Once execution passes the call to rcu_report_dead(), RCU is ignoring
the CPU, which results in lockdep complaints when the interrupt handler
uses RCU:
------------------------------------------------------------------------
=============================
WARNING: suspicious RCU usage
5.2.0-rc1+ #681 Not tainted
-----------------------------
kernel/sched/fair.c:9542 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/5/0.
stack backtrace:
CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.2.0-rc1+ #681
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Bochs 01/01/2011
Call Trace:
<IRQ>
dump_stack+0x5e/0x8b
trigger_load_balance+0xa8/0x390
? tick_sched_do_timer+0x60/0x60
update_process_times+0x3b/0x50
tick_sched_handle+0x2f/0x40
tick_sched_timer+0x32/0x70
__hrtimer_run_queues+0xd3/0x3b0
hrtimer_interrupt+0x11d/0x270
? sched_clock_local+0xc/0x74
smp_apic_timer_interrupt+0x79/0x200
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:delay_tsc+0x22/0x50
Code: ff 0f 1f 80 00 00 00 00 65 44 8b 05 18 a7 11 48 0f ae e8 0f 31 48 89 d6 48 c1 e6 20 48 09 c6 eb 0e f3 90 65 8b 05 fe a6 11 48 <41> 39 c0 75 18 0f ae e8 0f 31 48 c1 e2 20 48 09 c2 48 89 d0 48 29
RSP: 0000:ffff8f92c0157ed0 EFLAGS: 00000212 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000005 RBX: ffff8c861f356400 RCX: ffff8f92c0157e64
RDX: 000000321214c8cc RSI: 00000032120daa7f RDI: 0000000000260f15
RBP: 0000000000000005 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000000 R14: ffff8c861ee18000 R15: ffff8c861ee18000
cpuhp_report_idle_dead+0x31/0x60
do_idle+0x1d5/0x200
? _raw_spin_unlock_irqrestore+0x2d/0x40
cpu_startup_entry+0x14/0x20
start_secondary+0x151/0x170
secondary_startup_64+0xa4/0xb0
------------------------------------------------------------------------
This happens rarely, but can be forced by happen more often by
placing delays in cpuhp_report_idle_dead() following the call to
rcu_report_dead(). With this in place, the following rcutorture
scenario reproduces the problem within a few minutes:
tools/testing/selftests/rcutorture/bin/kvm.sh --cpus 8 --duration 5 --kconfig "CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y" --configs "TREE04"
This commit uses the crude but effective expedient of moving the disabling
of interrupts within the idle loop to precede the cpu_is_offline()
check. It also invokes tick_nohz_idle_stop_tick() instead of
tick_nohz_idle_stop_tick_protected() to shut off the scheduling-clock
interrupt.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
[ paulmck: Revert tick_nohz_idle_stop_tick_protected() removal, new callers. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a46d14eca7 ]
Enabling WARN_DOUBLE_CLOCK in /sys/kernel/debug/sched_features causes
warning to fire in update_rq_clock. This seems to be caused by onlining
a new fair sched group not using the rq lock wrappers.
[] rq->clock_update_flags & RQCF_UPDATED
[] WARNING: CPU: 5 PID: 54385 at kernel/sched/core.c:210 update_rq_clock+0xec/0x150
[] Call Trace:
[] online_fair_sched_group+0x53/0x100
[] cpu_cgroup_css_online+0x16/0x20
[] online_css+0x1c/0x60
[] cgroup_apply_control_enable+0x231/0x3b0
[] cgroup_mkdir+0x41b/0x530
[] kernfs_iop_mkdir+0x61/0xa0
[] vfs_mkdir+0x108/0x1a0
[] do_mkdirat+0x77/0xe0
[] do_syscall_64+0x55/0x1d0
[] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Using the wrappers in online_fair_sched_group instead of the raw locking
removes this warning.
[ tglx: Use rq_*lock_irq() ]
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20190801133749.11033-1-pauld@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dc34d635c ]
Sometimes platfom may take too long to respond to the command and OS
might timeout before platform transfer the ownership of the shared
memory region to the OS with the response.
Since the mailbox channel associated with the channel is freed and new
commands are dispatch on the same channel, OS needs to wait until it
gets back the ownership. If not, either OS may end up overwriting the
platform response for the last command(which is fine as OS timed out
that command) or platform might overwrite the payload for the next
command with the response for the old.
The latter is problematic as platform may end up interpretting the
response as the payload. In order to avoid such race, let's wait until
the OS gets back the ownership before we prepare the shared memory with
the payload for the next command.
Reported-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29a3388bfc ]
Depending on how BIOS has marked the reserved region containing the 32KB
MCHBAR you can get warnings like:
resource sanity check: requesting [mem 0xfed10000-0xfed1ffff], which spans more than reserved [mem 0xfed10000-0xfed17fff]
caller dnv_rd_reg+0xc8/0x240 [pnd2_edac] mapping multiple BARs
Not all of the mmio regions used in dnv_rd_reg() are the same size. The
MCHBAR window is 32KB and the sideband ports are 64KB. Pass the correct
size to ioremap() depending on which resource we're reading from.
Signed-off-by: Stephen Douthit <stephend@silicom-usa.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdbe4eeeb1 ]
Enabling Direct I/O with loop devices helps reducing memory usage by
avoiding double caching. 32 bit applications running on 64 bits systems
are currently not able to request direct I/O because is missing from the
lo_compat_ioctl.
This patch fixes the compatibility issue mentioned above by exporting
LOOP_SET_DIRECT_IO as additional lo_compat_ioctl() entry.
The input argument for this ioctl is a single long converted to a 1-bit
boolean, so compatibility is preserved.
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c2b005f54 ]
Some platforms define their processors in this manner:
Device (SCK0)
{
Name (_HID, "ACPI0004" /* Module Device */) // _HID: Hardware ID
Name (_UID, "CPUSCK0") // _UID: Unique ID
Processor (CP00, 0x00, 0x00000410, 0x06){}
Processor (CP01, 0x02, 0x00000410, 0x06){}
Processor (CP02, 0x04, 0x00000410, 0x06){}
Processor (CP03, 0x06, 0x00000410, 0x06){}
Processor (CP04, 0x01, 0x00000410, 0x06){}
Processor (CP05, 0x03, 0x00000410, 0x06){}
Processor (CP06, 0x05, 0x00000410, 0x06){}
Processor (CP07, 0x07, 0x00000410, 0x06){}
Processor (CP08, 0xFF, 0x00000410, 0x06){}
Processor (CP09, 0xFF, 0x00000410, 0x06){}
Processor (CP0A, 0xFF, 0x00000410, 0x06){}
Processor (CP0B, 0xFF, 0x00000410, 0x06){}
...
The processors marked as 0xff are invalid, there are only 8 of them in
this case.
So do not print an error on ids == 0xff, just print an info message.
Actually, we could return ENODEV even on the first CPU with ID 0xff, but
ACPI spec does not forbid the 0xff value to be a processor ID. Given
0xff could be a correct one, we would break working systems if we
returned ENODEV.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6898dd580a ]
arch/microblaze/ defines out_be32() and in_be32(), so don't do that
again in the driver source.
Fixes these build warnings:
../drivers/media/platform/fsl-viu.c:36: warning: "out_be32" redefined
../arch/microblaze/include/asm/io.h:50: note: this is the location of the previous definition
../drivers/media/platform/fsl-viu.c:37: warning: "in_be32" redefined
../arch/microblaze/include/asm/io.h:53: note: this is the location of the previous definition
Fixes: 29d7506863 ("media: fsl-viu: allow building it with COMPILE_TEST")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 062f5b2ae1 ]
When a disk is added to array, the following path is called in mdadm.
Manage_subdevs -> sysfs_freeze_array
-> Manage_add
-> sysfs_set_str(&info, NULL, "sync_action","idle")
Then from kernel side, Manage_add invokes the path (add_new_disk ->
validate_super = super_1_validate) to set In_sync flag.
Since In_sync means "device is in_sync with rest of array", and the new
added disk need to resync thread to help the synchronization of data.
And md_reap_sync_thread would call spare_active to set In_sync for the
new added disk finally. So don't set In_sync if array is in frozen.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d8ed0e9bf ]
When add one disk to array, the md_reap_sync_thread is responsible
to activate the spare and set In_sync flag for the new member in
spare_active().
But if raid1 has one member disk A, and disk B is added to the array.
Then we offline A before all the datas are synchronized from A to B,
obviously B doesn't have the latest data as A, but B is still marked
with In_sync flag.
So let's not call spare_active under the condition, otherwise B is
still showed with 'U' state which is not correct.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eeba6809d8 ]
When write bio return error, it would be added to conf->retry_list
and wait for raid1d thread to retry write and acknowledge badblocks.
In narrow_write_error(), the error bio will be split in the unit of
badblock shift (such as one sector) and raid1d thread issues them
one by one. Until all of the splited bio has finished, raid1d thread
can go on processing other things, which is time consuming.
But, there is a scene for error handling that is not necessary.
When the device has been set faulty, flush_bio_list() may end
bios in pending_bio_list with error status. Since these bios
has not been issued to the device actually, error handlding to
retry write and acknowledge badblocks make no sense.
Even without that scene, when the device is faulty, badblocks info
can not be written out to the device. Thus, we also no need to
handle the error IO.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b99286b088 ]
The commit d5370f7548 ("arm64: prefetch: add alternative pattern for
CPUs without a prefetcher") introduced MIDR_IS_CPU_MODEL_RANGE() to be
used in has_no_hw_prefetch() with rv_min=0 which generates a compilation
warning from GCC,
In file included from ./arch/arm64/include/asm/cache.h:8,
from ./include/linux/cache.h:6,
from ./include/linux/printk.h:9,
from ./include/linux/kernel.h:15,
from ./include/linux/cpumask.h:10,
from arch/arm64/kernel/cpufeature.c:11:
arch/arm64/kernel/cpufeature.c: In function 'has_no_hw_prefetch':
./arch/arm64/include/asm/cputype.h:59:26: warning: comparison of
unsigned expression >= 0 is always true [-Wtype-limits]
_model == (model) && rv >= (rv_min) && rv <= (rv_max); \
^~
arch/arm64/kernel/cpufeature.c:889:9: note: in expansion of macro
'MIDR_IS_CPU_MODEL_RANGE'
return MIDR_IS_CPU_MODEL_RANGE(midr, MIDR_THUNDERX,
^~~~~~~~~~~~~~~~~~~~~~~
Fix it by converting MIDR_IS_CPU_MODEL_RANGE to a static inline
function.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06e8f5c842 ]
ADG is using clk_get_rate() under atomic context, thus, we might
have scheduling issue.
To avoid this issue, we need to get/keep clk rate under
non atomic context.
We need to handle ADG as special device at Renesas Sound driver.
From SW point of view, we want to impletent it as
rsnd_mod_ops :: prepare, but it makes code just complicate.
To avoid complicated code/patch, this patch adds new clk_rate[] array,
and keep clk IN rate when rsnd_adg_clk_enable() was called.
Reported-by: Leon Kong <Leon.KONG@cn.bosch.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Leon Kong <Leon.KONG@cn.bosch.com>
Link: https://lore.kernel.org/r/87v9vb0xkp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5e5c48c16 ]
The function free_module in file kernel/module.c as follow:
void free_module(struct module *mod) {
......
module_arch_cleanup(mod);
......
module_arch_freeing_init(mod);
......
}
Both module_arch_cleanup and module_arch_freeing_init function
would free the mod->arch.init_unw_table, which cause double free.
Here, set mod->arch.init_unw_table = NULL after remove the unwind
table to avoid double free.
Signed-off-by: chenzefeng <chenzefeng2@huawei.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b34121d9f ]
The Linux kernel assumes that get_endpoint(alts,0) and
get_endpoint(alts,1) are eachothers feedback endpoints.
To reassure that validity it will test bsynchaddress to comply with that
assumption. But if the bsyncaddress is 0 (invalid), it will flag that as
a wrong assumption and return an error.
Fix: Skip the test if bSynchAddress is 0.
Note: those with a valid bSynchAddress should have a code quirck added.
Signed-off-by: Ard van Breemen <ard@kwaak.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3724ace582 ]
The grain in EDAC is defined as "minimum granularity for an error
report, in bytes". The following calculation of the grain_bits in
edac_mc is wrong:
grain_bits = fls_long(e->grain) + 1;
Where grain_bits is defined as:
grain = 1 << grain_bits
Example:
grain = 8 # 64 bit (8 bytes)
grain_bits = fls_long(8) + 1
grain_bits = 4 + 1 = 5
grain = 1 << grain_bits
grain = 1 << 5 = 32
Replace it with the correct calculation:
grain_bits = fls_long(e->grain - 1);
The example gives now:
grain_bits = fls_long(8 - 1)
grain_bits = fls_long(7)
grain_bits = 3
grain = 1 << 3 = 8
Also, check if the hardware reports a reasonable grain != 0 and fallback
with a warning to 1 byte granularity otherwise.
[ bp: massage a bit. ]
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20190624150758.6695-2-rrichter@marvell.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2127c01b7f ]
In build_adc_controls(), there is an if statement on line 773 to check
whether ak->adc_info is NULL:
if (! ak->adc_info ||
! ak->adc_info[mixer_ch].switch_name)
When ak->adc_info is NULL, it is used on line 792:
knew.name = ak->adc_info[mixer_ch].selector_name;
Thus, a possible null-pointer dereference may occur.
To fix this bug, referring to lines 773 and 774, ak->adc_info
and ak->adc_info[mixer_ch].selector_name are checked before being used.
This bug is found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd65f7e19c ]
The last fallback of CORB/RIRB communication error recovery is to turn
on the single command mode, and this last resort usually means that
something is really screwed up. Instead of a normal dev_err(), show
the error more clearly with dev_WARN() with the caller stack trace.
Also, show the bus-reset fallback also as an error, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
