LPM feature of DWC2 module integrated in Rockchip SoCs doesn't work
properly or needs some additional handling, so disable it for now.
Without disabling LPM feature, the USB ADB communication fail with
the following error log:
dwc2 ff580000.usb: new address 27
dwc2 ff580000.usb: Failed to exit L1 sleep state in 200us.
dwc2 ff580000.usb: dwc2_hsotg_send_reply: cannot queue req
dwc2 ff580000.usb: dwc2_hsotg_process_req_status: failed to send reply
dwc2 ff580000.usb: dwc2_hsotg_enqueue_setup: failed queue (-11)
dwc2 ff580000.usb: Failed to exit L1 sleep state in 200us.
[diff vs vendor kernel: added lpm_clock_gating, besl and
hird_threshold_en settings as seen in commit 53febc9569 ("usb: dwc2:
disable Link Power Management on STM32MP15 HS OTG")]
Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20221206-dwc2-gadget-dual-role-v1-1-36515e1092cd@theobroma-systems.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 0f01017191 ("usb: dwc3: Don't switch OTG -> peripheral
if extcon is present"), Dual Role support on Intel Merrifield platform
broke due to rearranging the call to dwc3_get_extcon().
It appears to be caused by ulpi_read_id() masking the timeout on the first
test write. In the past dwc3 probe continued by calling dwc3_core_soft_reset()
followed by dwc3_get_extcon() which happend to return -EPROBE_DEFER.
On deferred probe ulpi_read_id() finally succeeded. Due to above mentioned
rearranging -EPROBE_DEFER is not returned and probe completes without phy.
On Intel Merrifield the timeout on the first test write issue is reproducible
but it is difficult to find the root cause. Using a mainline kernel and
rootfs with buildroot ulpi_read_id() succeeds. As soon as adding
ftrace / bootconfig to find out why, ulpi_read_id() fails and we can't
analyze the flow. Using another rootfs ulpi_read_id() fails even without
adding ftrace. We suspect the issue is some kind of timing / race, but
merely retrying ulpi_read_id() does not resolve the issue.
As we now changed ulpi_read_id() to return -ETIMEDOUT in this case, we
need to handle the error by calling dwc3_core_soft_reset() and request
-EPROBE_DEFER. On deferred probe ulpi_read_id() is retried and succeeds.
Fixes: ef6a7bcfb0 ("usb: ulpi: Support device discovery via DT")
Cc: stable@vger.kernel.org
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221205201527.13525-3-ftoth@exalondelft.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 0f01017191 ("usb: dwc3: Don't switch OTG -> peripheral
if extcon is present") Dual Role support on Intel Merrifield platform
broke due to rearranging the call to dwc3_get_extcon().
It appears to be caused by ulpi_read_id() on the first test write failing
with -ETIMEDOUT. Currently ulpi_read_id() expects to discover the phy via
DT when the test write fails and returns 0 in that case, even if DT does not
provide the phy. As a result usb probe completes without phy.
Make ulpi_read_id() return -ETIMEDOUT to its user if the first test write
fails. The user should then handle it appropriately. A follow up patch
will make dwc3_core_init() set -EPROBE_DEFER in this case and bail out.
Fixes: ef6a7bcfb0 ("usb: ulpi: Support device discovery via DT")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221205201527.13525-2-ftoth@exalondelft.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Genesys Logic GL850G is a 4-port USB 2.0 STT hub that has a reset pin to
toggle and a 3.3V core supply exported (although an integrated LDO is
available for powering it with 5V).
Add the support for this hub, for controlling the reset pin and the core
power supply.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20221206055228.306074-4-uwu@icenowy.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Genesys Logic GL850G is a USB 2.0 Single TT hub controller that
features 4 downstream ports, an internal 5V-to-3.3V LDO regulator (can
be bypassed) and an external reset pin.
Add a device tree binding for its USB protocol part. The internal LDO is
not covered by this and can just be modelled as a fixed regulator.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221206055228.306074-3-uwu@icenowy.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20221125170444.36620123@endymion.delvare
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The checks for musb->xceiv and musb->xceiv->set_power duplicate those in
usb_phy_set_power(), so there is no need of them. Moreover, not calling
usb_phy_set_power() results in usb_phy_set_charger_current() not being
called, so current USB config max current is not propagated through USB
charger framework and charger drivers may try to draw more current than
allowed or possible.
Fix that by removing those extra checks and calling usb_phy_set_power()
directly.
Tested on Motorola Droid4 and Nokia N900
Fixes: a9081a008f ("usb: phy: Add USB charger support")
Cc: stable <stable@kernel.org>
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Link: https://lore.kernel.org/r/1669400475-4762-1-git-send-email-ivo.g.dimitrov.75@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan writes:
USB-serial updates for 6.2-rc1
Here are the USB-serial updates for 6.2-rc1, including:
- B0 hangup support for cp210x
- avoid requesting a zero DTE rate which could potentially confuse
buggy firmware in XR devices
Included are also some new device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.2-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: xr: avoid requesting zero DTE rate
USB: serial: cp210x: add support for B0 hangup
USB: serial: cp210x: add Kamstrup RF sniffer PIDs
USB: serial: option: add Quectel EM05-G modem
Johan writes:
USB-serial fixes for 6.1-rc8
Here are two fixes for a division-by-zero issue in the Fintek drivers.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.1-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: f81534: fix division by zero on line-speed change
USB: serial: f81232: fix division by zero on line-speed change
When the requested line speed is B0 (hangup) there is no need to use the
current speed in the line-coding request. This specifically avoids
requesting a zero DTE rate when the current speed is B0, which could
potentially confuse buggy firmware.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The driver leaves the line speed unchanged in case a requested speed is
not supported. Make sure to handle the case where the current speed is
B0 (hangup) without dividing by zero when determining the clock source.
Fixes: 3aacac02f3 ("USB: serial: f81534: add high baud rate support")
Cc: stable@vger.kernel.org # 4.16
Cc: Ji-Ze Hong (Peter Hong) <hpeter@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The driver leaves the line speed unchanged in case a requested speed is
not supported. Make sure to handle the case where the current speed is
B0 (hangup) without dividing by zero when determining the clock source.
Fixes: 268ddb5e9b ("USB: serial: f81232: add high baud rate support")
Cc: stable@vger.kernel.org # 5.2
Cc: Ji-Ze Hong (Peter Hong) <hpeter@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Disable U3 suspended ports in hibernate S4 poweroff_late for systems
with XHCI_RESET_TO_DEFAULT quirk, if wakeup is not enabled.
This reduces the number of self-powered usb devices from surviving in
U3 suspended state into next reboot.
Bootloader/firmware on these systems can't handle usb ports in U3, and
will timeout, causing extra delay during reboot/restore from S4.
Add pci_poweroff_late() callback to struct usb_hcd to get this done at
the correct stage in hibernate.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221130091944.2171610-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A request to set the line speed to B0 is used to hang up a modem
connection by deasserting the modem control lines.
Note that there is no need reconfigure the line speed in hardware when
B0 is requested (even if some drivers do set it to an arbitrary value
for implementation or protocol reasons).
Reviewed-by: Alex Henrie <alexh@vpitech.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
dwc->desired_dr_role is changed by dwc3_set_mode inside a spinlock but
then read by __dwc3_set_mode outside of that lock. This can lead to a
race condition when very quick successive role switch events happen:
CPU A
dwc3_set_mode(DWC3_GCTL_PRTCAP_HOST) // first role switch event
spin_lock_irqsave(&dwc->lock, flags);
dwc->desired_dr_role = mode; // DWC3_GCTL_PRTCAP_HOST
spin_unlock_irqrestore(&dwc->lock, flags);
queue_work(system_freezable_wq, &dwc->drd_work);
CPU B
__dwc3_set_mode
// ....
spin_lock_irqsave(&dwc->lock, flags);
// desired_dr_role is DWC3_GCTL_PRTCAP_HOST
dwc3_set_prtcap(dwc, dwc->desired_dr_role);
spin_unlock_irqrestore(&dwc->lock, flags);
CPU A
dwc3_set_mode(DWC3_GCTL_PRTCAP_DEVICE) // second event
spin_lock_irqsave(&dwc->lock, flags);
dwc->desired_dr_role = mode; // DWC3_GCTL_PRTCAP_DEVICE
spin_unlock_irqrestore(&dwc->lock, flags);
CPU B (continues running __dwc3_set_mode)
switch (dwc->desired_dr_role) { // DWC3_GCTL_PRTCAP_DEVICE
// ....
case DWC3_GCTL_PRTCAP_DEVICE:
// ....
ret = dwc3_gadget_init(dwc);
We then have DWC3_GCTL.DWC3_GCTL_PRTCAPDIR = DWC3_GCTL_PRTCAP_HOST and
dwc->current_dr_role = DWC3_GCTL_PRTCAP_HOST but initialized the
controller in device mode. It's also possible to get into a state
where both host and device are intialized at the same time.
Fix this race by creating a local copy of desired_dr_role inside
__dwc3_set_mode while holding dwc->lock.
Fixes: 41ce1456e1 ("usb: dwc3: core: make dwc3_set_mode() work properly")
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20221128161526.79730-1-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika writes:
thunderbolt: Changes for v6.2 merge window
This includes following Thunderbolt/USB4 changes for the v6.2 merge
window:
- Add wake on connect/disconnect for USB4 ports
- A couple of minor cleanups
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Add wake on connect/disconnect on USB4 ports
thunderbolt: ACPI: Use the helper fwnode_find_reference()
thunderbolt: Remove redundant assignment to variable len
thunderbolt: Use str_enabled_disabled() helper
The embedded struct cdev does not have its lifetime correctly tied to
the enclosing struct f_hidg, so there is a use-after-free if /dev/hidgN
is held open while the gadget is deleted.
This can readily be replicated with libusbgx's example programs (for
conciseness - operating directly via configfs is equivalent):
gadget-hid
exec 3<> /dev/hidg0
gadget-vid-pid-remove
exec 3<&-
Pull the existing device up in to struct f_hidg and make use of the
cdev_device_{add,del}() helpers. This changes the lifetime of the
device object to match struct f_hidg, but note that it is still added
and deleted at the same time.
Fixes: 71adf11894 ("USB: gadget: add HID gadget driver")
Tested-by: Lee Jones <lee@kernel.org>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20221122123523.3068034-2-john@metanate.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20221127155230.144886b7@endymion.delvare
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The am35x glue layer is no longer in use and can be dropped. There are no
longer any SoCs passing platform data for it as they are booting using
devicetree.
In general, the am35x SoCs are similar to am335x and ti81xx and can
use the musb_dsps glue layer as long as there is a proper phy driver
available.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221125085506.38127-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
