[ Upstream commit cc7eac1e4a ]
Since EHCI/OHCI controllers on R-Car Gen3 SoCs are possible to
be getting stuck very rarely after a full/low usb device was
disconnected. To detect/recover from such a situation, the controllers
require a special way which poll the EHCI PORTSC register and changes
the OHCI functional state.
So, this patch adds a polling timer into the ehci-platform driver,
and if the ehci driver detects the issue by the EHCI PORTSC register,
the ehci driver removes a companion device (= the OHCI controller)
to change the OHCI functional state to USB Reset once. And then,
the ehci driver adds the companion device again.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/1580114262-25029-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f5d82f187 ]
Added a check in the switch case on start_header that checks for
the existence of the header, and in the case that MAC is not set
and the caller requests for MAC, -EFAULT. If the caller requests
for NET then MAC's existence is completely ignored.
There is no function to check NET header's existence and as far
as cgroup_skb/egress is concerned it should always be set.
Removed for ptr >= the start of header, considering offset is
bounded unsigned and should always be true. len <= end - mac is
redundant to ptr + len <= end.
Fixes: 3eee1f75f2 ("bpf: fix bpf_skb_load_bytes_relative pkt length check")
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/76bb820ddb6a95f59a772ecbd8c8a336f646b362.1591812755.git.zhuyifei@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f1fbc70c1 ]
With commit dc20b2d526 ("x86/idt: Move interrupt gate initialization to
IDT code") non assigned system vectors are also marked as used in
'used_vectors' (now 'system_vectors') bitmap. This makes checks in
arch_show_interrupts() whether a particular system vector is allocated to
always pass and e.g. 'Hyper-V reenlightenment interrupts' entry always
shows up in /proc/interrupts.
Another side effect of having all unassigned system vectors marked as used
is that irq_matrix_debug_show() will wrongly count them among 'System'
vectors.
As it is now ensured that alloc_intr_gate() is not called after init, it is
possible to leave unused entries in 'system_vectors' unset to fix these
issues.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200428093824.1451532-4-vkuznets@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ca068be09 ]
Fix afs_put_sysnames() to actually free the specified afs_sysnames
object after its reference count has been decreased to zero and
its contents have been released.
Fixes: 6f8880d8e6 ("afs: Implement @sys substitution handling")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8027bc0307 ]
If user passed an interface option longer than 15 characters, then
device.ifr_name and hwtstamp.ifr_name became non-null-terminated
strings. The compiler warned about this:
timestamping.c:353:2: warning: ‘strncpy’ specified bound 16 equals \
destination size [-Wstringop-truncation]
353 | strncpy(device.ifr_name, interface, sizeof(device.ifr_name));
Fixes: cb9eff0978 ("net: new user space API for time stamping of incoming and outgoing packets")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2130c0ba69 ]
When remote files are counted in get_files_count, without using SSH,
the code returns 0 because there is a colon prepended to $LOC. $VPATH
should have been used instead of $LOC.
Fixes: 06bd0407d0 ("NTB: ntb_test: Update ntb_tool Scratchpad tests")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Tested-by: Alexander Fomichev <fomichev.ru@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34d8673a01 ]
When running ntb_test, the script tries to run the ntb_perf test
immediately after probing the modules. Since adding multi-port support,
this fails seeing the new initialization procedure in ntb_perf
can not complete instantly.
To fix this we add a completion which is waited on when a test is
started. In this way, run can be written any time after the module is
loaded and it will wait for the initialization to complete instead of
sending an error.
Fixes: 5648e56d03 ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Tested-by: Alexander Fomichev <fomichev.ru@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b54369a248 ]
Legacy drivers do not have port numbers (but is reliably only two ports)
and was broken by the recent commit that added mult-port support to
ntb_perf. This is especially important to support the cross link
topology which is perfectly symmetric and cannot assign unique port
numbers easily.
Hardware that returns zero for both the local port and the peer should
just always use gidx=0 for the only peer.
Fixes: 5648e56d03 ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Tested-by: Alexander Fomichev <fomichev.ru@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9c4211ac9 ]
ntb_perf should not require more than one memory window per peer. This
was probably an off-by-one error.
Fixes: 5648e56d03 ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Tested-by: Alexander Fomichev <fomichev.ru@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40da7d9a93 ]
Commit 417cf39cfe ("NTB: Set dma mask and dma coherent mask to NTB
devices") started using the NTB device for DMA allocations which was
turns out was wrong. If the IOMMU is enabled, such alloctanions will
always fail with messages such as:
DMAR: Allocating domain for 0000:02:00.1 failed
This is because the IOMMU has not setup the device for such use.
Change the tools back to using the PCI device for allocations seeing
it doesn't make sense to add an IOMMU group for the non-physical NTB
device. Also remove the code that sets the DMA mask as it no longer
makes sense to do this.
Fixes: 7f46c8b3a5 ("NTB: ntb_tool: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Tested-by: Alexander Fomichev <fomichev.ru@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 912e12813d ]
When running ntb_test this warning is issued:
./ntb_test.sh: line 200: warning: command substitution: ignored null
byte in input
This is caused by the kernel returning one more byte than is necessary
when reading the link file.
Reduce the number of bytes read back to 2 as it was before the
commit that regressed this.
Fixes: 7f46c8b3a5 ("NTB: ntb_tool: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Tested-by: Alexander Fomichev <fomichev.ru@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 433efe7206 ]
Currently, ntb->dev is passed to dma_alloc_coherent
and dma_free_coherent calls. The returned dma_addr_t
is the CPU physical address. This works fine as long
as IOMMU is disabled. But when IOMMU is enabled, we
need to make sure that IOVA is returned for dma_addr_t.
So the correct way to achieve this is by changing the
first parameter of dma_alloc_coherent() as ntb->pdev->dev
instead.
Fixes: 5648e56d03 ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98f4e14026 ]
Currently, ntb->dev is passed to dma_alloc_coherent
and dma_free_coherent calls. The returned dma_addr_t
is the CPU physical address. This works fine as long
as IOMMU is disabled. But when IOMMU is enabled, we
need to make sure that IOVA is returned for dma_addr_t.
So the correct way to achieve this is by changing the
first parameter of dma_alloc_coherent() as ntb->pdev->dev
instead.
Fixes: 5648e56d03 ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83d060ca8d ]
Before this patch, transactions could be merged into the system
transaction by function gfs2_merge_trans(), but the transaction ail
lists were never merged. Because the ail flushing mechanism can run
separately, bd elements can be attached to the transaction's buffer
list during the transaction (trans_add_meta, etc) but quickly moved
to its ail lists. Later, in function gfs2_trans_end, the transaction
can be freed (by gfs2_trans_end) while it still has bd elements
queued to its ail lists, which can cause it to either lose track of
the bd elements altogether (memory leak) or worse, reference the bd
elements after the parent transaction has been freed.
Although I've not seen any serious consequences, the problem becomes
apparent with the previous patch's addition of:
gfs2_assert_warn(sdp, list_empty(&tr->tr_ail1_list));
to function gfs2_trans_free().
This patch adds logic into gfs2_merge_trans() to move the merged
transaction's ail lists to the sdp transaction. This prevents the
use-after-free. To do this properly, we need to hold the ail lock,
so we pass sdp into the function instead of the transaction itself.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5aec598c45 ]
The function blk_log_remap() can be simplified by removing the
call to get_pdu_remap() that copies the values into extra variable to
print the data, which also fixes the endiannness warning reported by
sparse.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48bc3cd3e0 ]
In blk_add_trace_spliti() blk_add_trace_bio_remap() use
blk_status_to_errno() to pass the error instead of pasing the bi_status.
This fixes the sparse warning.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51da9dfb7f ]
ELFNOTE_START allows callers to specify flags for .pushsection assembler
directives. All callsites but ELF_NOTE use "a" for SHF_ALLOC. For vdso's
that explicitly use ELF_NOTE_START and BUILD_SALT, the same section is
specified twice after preprocessing, once with "a" flag, once without.
Example:
.pushsection .note.Linux, "a", @note ;
.pushsection .note.Linux, "", @note ;
While GNU as allows this ordering, it warns for the opposite ordering,
making these directives position dependent. We'd prefer not to precisely
match this behavior in Clang's integrated assembler. Instead, the non
__ASSEMBLY__ definition of ELF_NOTE uses
__attribute__((section(".note.Linux"))) which is created with SHF_ALLOC,
so let's make the __ASSEMBLY__ definition of ELF_NOTE consistent with C
and just always use "a" flag.
This allows Clang to assemble a working mainline (5.6) kernel via:
$ make CC=clang AS=clang
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/913
Link: http://lkml.kernel.org/r/20200325231250.99205-1-ndesaulniers@google.com
Debugged-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acaab7335b ]
The zlib inflate code has an old micro-optimization based on the
assumption that for pre-increment memory accesses, the compiler will
generate code that fits better into the processor's pipeline than what
would be generated for post-increment memory accesses.
This optimization was already removed in upstream zlib in 2016:
https://github.com/madler/zlib/commit/9aaec95e8211
This optimization causes UB according to C99, which says in section 6.5.6
"Additive operators": "If both the pointer operand and the result point to
elements of the same array object, or one past the last element of the
array object, the evaluation shall not produce an overflow; otherwise, the
behavior is undefined".
This UB is not only a theoretical concern, but can also cause trouble for
future work on compiler-based sanitizers.
According to the zlib commit, this optimization also is not optimal
anymore with modern compilers.
Replace uses of OFF, PUP and UP_UNALIGNED with their definitions in the
POSTINC case, and remove the macro definitions, just like in the upstream
patch.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Link: http://lkml.kernel.org/r/20200507123112.252723-1-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d149045b3 ]
If the geneve interface is in collect_md (external) mode, it can't send any
packets submitted directly to its net interface, as such packets won't have
metadata attached. This is expected.
However, the kernel itself sends some packets to the interface, most
notably, IPv6 DAD, IPv6 multicast listener reports, etc. This is not wrong,
as tunnel metadata can be specified in routing table (although technically,
that has never worked for IPv6, but hopefully will be fixed eventually) and
then the interface must correctly participate in IPv6 housekeeping.
The problem is that any such attempt increases the tx_error counter. Just
bringing up a geneve interface with IPv6 enabled is enough to see a number
of tx_errors. That causes confusion among users, prompting them to find
a network error where there is none.
Change the counter used to tx_dropped. That better conveys the meaning
(there's nothing wrong going on, just some packets are getting dropped) and
hopefully will make admins panic less.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 281c377872 ]
The current implementation of the multiple accelerator core support for
OMAP SHA does not work properly. It always picks up the first probed
accelerator core if this is available, and rest of the book keeping also
gets confused if there are two cores available. Add proper load
balancing support for SHA, and also fix any bugs related to the
multicore support while doing it.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be32acff43 ]
Urgent bkops level is used to compare against actual bkops status read from
UFS device. Urgent bkops level is set during initialization and might be
updated in exception event handler during runtime. But it should not be
updated to the actual bkops status every time when auto bkops is toggled.
Otherwise, if urgent bkops level is updated to 0, auto bkops shall always
be kept enabled.
Link: https://lore.kernel.org/r/1590632686-17866-1-git-send-email-cang@codeaurora.org
Fixes: 24366c2afb ("scsi: ufs: Recheck bkops level if bkops is disabled")
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea22eee4e6 ]
Before this patch, a simple typo accidentally added \n to the jid=
string for lock_nolock mounts. This made it impossible to mount a
gfs2 file system with a journal other than journal0. Thus:
mount -tgfs2 -o hostdata="jid=1" <device> <mount pt>
Resulted in:
mount: wrong fs type, bad option, bad superblock on <device>
In most cases this is not a problem. However, for debugging and
testing purposes we sometimes want to test the integrity of other
journals. This patch removes the unnecessary \n and thus allows
lock_nolock users to specify an alternate journal.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bd140e14d ]
Working on the OpenRISC glibc port I found that sometimes clone was
working strange. That the tls data argument sent in r7 was always
wrong. Further investigation revealed that the arguments were getting
clobbered in the entry code. This patch removes the code that writes to
the argument registers. This was likely due to some old code hanging
around.
This patch fixes this up for clone and fork. This fork clobber is
harmless but also useless so remove.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32f71aa497 ]
The user ID value isn't actually much use - and leaks a kernel pointer or a
userspace value - so replace it with the call debug ID, which appears in trace
points.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa8ba13cae ]
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object. Thus,
replace kfree() by kobject_put() to fix this issue. Previous
commit "b8eb718348b8" fixed a similar problem.
Fixes: 7b96953bc6 ("vfio: Mediated device Core driver")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36124fb19f ]
fsl_asrc_dma_hw_params() invokes dma_request_channel() or
fsl_asrc_get_dma_channel(), which returns a reference of the specified
dma_chan object to "pair->dma_chan[dir]" with increased refcnt.
The reference counting issue happens in one exception handling path of
fsl_asrc_dma_hw_params(). When config DMA channel failed for Back-End,
the function forgets to decrease the refcnt increased by
dma_request_channel() or fsl_asrc_get_dma_channel(), causing a refcnt
leak.
Fix this issue by calling dma_release_channel() when config DMA channel
failed.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1590415966-52416-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc84cff2c9 ]
In some error handling paths, a call to 'iio_channel_get()' is not balanced
by a corresponding call to 'iio_channel_release()'.
This can be achieved easily by using the devm_ variant of
'iio_channel_get()'.
This has the extra benefit to simplify the remove function.
Fixes: 19939860dc ("extcon: adc_jack: adc-jack driver to support 3.5 pi or simliar devices")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a325dd06f ]
The problem in this code is that if kobject_add() fails, then it should
call of_node_put(np) to drop the reference count. I've actually moved
the of_node_get(np) later in the function to avoid needing to do clean
up.
Fixes: 5b2c2f5a0e ("of: overlay: add missing of_node_get() in __of_attach_node_sysfs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 118917d696 ]
Fix off-by-one issues in 'rpc_ntop6':
- 'snprintf' returns the number of characters which would have been
written if enough space had been available, excluding the terminating
null byte. Thus, a return value of 'sizeof(scopebuf)' means that the
last character was dropped.
- 'strcat' adds a terminating null byte to the string, thus if len ==
buflen, the null byte is written past the end of the buffer.
Signed-off-by: Fedor Tokarev <ftokarev@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
