[ Upstream commit 0d6b35283b ]
task_state_index() ignores uninteresting state flags (such as
TASK_FREEZABLE) for most states, but for TASK_IDLE and TASK_RTLOCK_WAIT
it does not.
So if a task is waiting TASK_IDLE|TASK_FREEZABLE it gets incorrectly
reported as TASK_UNINTERRUPTIBLE or "D". (it is planned for nfsd to
change to use this state).
Fix this by only testing the interesting bits and not the irrelevant
bits in __task_state_index()
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/169335025927.5133.4781141800413736103@noble.neil.brown.name
Stable-dep-of: f718faf3940e ("freezer, sched: Report frozen tasks as 'D' instead of 'R'")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8421d4c8762bd022cb491f2f0f7019ef51b4f0a7 upstream.
If a newly-added link type doesn't invoke BPF_LINK_TYPE(), accessing
bpf_link_type_strs[link->type] may result in an out-of-bounds access.
To spot such missed invocations early in the future, checking the
validity of link->type in bpf_link_show_fdinfo() and emitting a warning
when such invocations are missed.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241024013558.1135167-3-houtao@huaweicloud.com
[ shung-hsi.yu: break up existing seq_printf() call since commit 68b04864ca
("bpf: Create links for BPF struct_ops maps.") is not present ]
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a640d6762a7d404644201ebf6d2a078e8dc84f97 ]
c994a3ec7e ("MIPS: set mips32r5 for virt extensions") setted
some instructions in virt extensions to ISA level mips32r5.
However TLB related vz instructions was leftover, also this
shouldn't be done to a R5 or R6 kernel buid.
Reorg macros to set ISA level as needed when _ASM_SET_VIRT
is called.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7678abee0867e6b7fb89aa40f6e9f575f755fb37 ]
Commit 4ce6e2db00de ("virtio-blk: Ensure no requests in virtqueues before
deleting vqs.") replaces queue quiesce with queue freeze in virtio-blk's
PM callbacks. And the motivation is to drain inflight IOs before suspending.
block layer's queue freeze looks very handy, but it is also easy to cause
deadlock, such as, any attempt to call into bio_queue_enter() may run into
deadlock if the queue is frozen in current context. There are all kinds
of ->suspend() called in suspend context, so keeping queue frozen in the
whole suspend context isn't one good idea. And Marek reported lockdep
warning[1] caused by virtio-blk's freeze queue in virtblk_freeze().
[1] https://lore.kernel.org/linux-block/ca16370e-d646-4eee-b9cc-87277c89c43c@samsung.com/
Given the motivation is to drain in-flight IOs, it can be done by calling
freeze & unfreeze, meantime restore to previous behavior by keeping queue
quiesced during suspend.
Cc: Yi Sun <yi.sun@unisoc.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: virtualization@lists.linux.dev
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20241112125821.1475793-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e54b00086f7473dbda1a7d6fc47720ced157c6a8 ]
While receiving an MST up request message from one thread in
drm_dp_mst_handle_up_req(), the MST topology could be removed from
another thread via drm_dp_mst_topology_mgr_set_mst(false), freeing
mst_primary and setting drm_dp_mst_topology_mgr::mst_primary to NULL.
This could lead to a NULL deref/use-after-free of mst_primary in
drm_dp_mst_handle_up_req().
Avoid the above by holding a reference for mst_primary in
drm_dp_mst_handle_up_req() while it's used.
v2: Fix kfreeing the request if getting an mst_primary reference fails.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204132007.3132494-1-imre.deak@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1aee7f034615b6824d2c70ddb37ef9fc23493b7 ]
This partially reverts commit 812fe6420a ("scsi: storvsc: Handle
additional SRB status values").
HyperV does not support MAINTENANCE_IN resulting in FC passthrough
returning the SRB_STATUS_DATA_OVERRUN value. Now that
SRB_STATUS_DATA_OVERRUN is treated as an error, multipath ALUA paths go
into a faulty state as multipath ALUA submits RTPG commands via
MAINTENANCE_IN.
[ 3.215560] hv_storvsc 1d69d403-9692-4460-89f9-a8cbcc0f94f3:
tag#230 cmd 0xa3 status: scsi 0x0 srb 0x12 hv 0xc0000001
[ 3.215572] scsi 1:0:0:32: alua: rtpg failed, result 458752
Make MAINTENANCE_IN return success to avoid the error path as is
currently done with INQUIRY and MODE_SENSE.
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Cathy Avery <cavery@redhat.com>
Link: https://lore.kernel.org/r/20241127181324.3318443-1-cavery@redhat.com
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e18655cf35a5958fbf4ae9ca3ebf28871a3a1801 ]
GCC 15 introduces -Werror=unterminated-string-initialization by default,
this results in the following build error
fs/smb/server/smb_common.c:21:35: error: initializer-string for array of 'char' is too long [-Werror=unterminated-string-ini
tialization]
21 | static const char basechars[43] = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ_-!@#$%";
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
To this we are replacing char basechars[43] with a character pointer
and then using strlen to get the length.
Signed-off-by: Brahmajit Das <brahmajit.xyz@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 947c4012f8f03a8bb946beb6e5294d5e32817d67 ]
When Z60MR100 startup, speaker will output a pop. To fix this issue,
we mute codec by init verbs in bios when system startup, and set GPIO
to low to unmute codec in codec driver when it loaded .
[ white space fixes and compile warning fix by tiwai ]
Signed-off-by: bo liu <bo.liu@senarytech.com>
Link: https://patch.msgid.link/20241129014441.437205-1-bo.liu@senarytech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c064de86d2a3909222d5996c5047f64c7a8f791b ]
Fix the hardware revision numbering for Qlogic ISP1020/1040 boards. HWMASK
suggests that the revision number only needs four bits, this is consistent
with how NetBSD does things in their ISP driver. Verified on a IPS1040B
which is seen as rev 5 not as BIT_4.
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20241113225636.2276-1-linmag7@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d685d55dfc86b1a4bdcec77c3c1f8a83f181264e ]
Make sure the trace_kprobe's module notifer callback function is called
after jump_label's callback is called. Since the trace_kprobe's callback
eventually checks jump_label address during registering new kprobe on
the loading module, jump_label must be updated before this registration
happens.
Link: https://lore.kernel.org/all/173387585556.995044.3157941002975446119.stgit@devnote2/
Fixes: 6142431810 ("tracing/kprobes: Support module init function probing")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 724c6ce38bbaeb4b3f109b0e066d6c0ecd15446c ]
For the most part of the C++ history, it couldn't have type
declarations inside anonymous unions for different reasons. At the
same time, __struct_group() relies on the latters, so when the @TAG
argument is not empty, C++ code doesn't want to build (even under
`extern "C"`):
../linux/include/uapi/linux/pkt_cls.h:25:24: error:
'struct tc_u32_sel::<unnamed union>::tc_u32_sel_hdr,' invalid;
an anonymous union may only have public non-static data members
[-fpermissive]
The safest way to fix this without trying to switch standards (which
is impossible in UAPI anyway) etc., is to disable tag declaration
for that language. This won't break anything since for now it's not
buildable at all.
Use a separate definition for __struct_group() when __cplusplus is
defined to mitigate the error, including the version from tools/.
Fixes: 50d7bd38c3 ("stddef: Introduce struct_group() helper macro")
Reported-by: Christopher Ferris <cferris@google.com>
Closes: https://lore.kernel.org/linux-hardening/Z1HZpe3WE5As8UAz@google.com
Suggested-by: Kees Cook <kees@kernel.org> # __struct_group_tag()
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20241219135734.2130002-1-aleksander.lobakin@intel.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05aa156e156ef3168e7ab8a68721945196495c17 ]
The mapping VMA address is saved in VAS window struct when the
paste address is mapped. This VMA address is used during migration
to unmap the paste address if the window is active. The paste
address mapping will be removed when the window is closed or with
the munmap(). But the VMA address in the VAS window is not updated
with munmap() which is causing invalid access during migration.
The KASAN report shows:
[16386.254991] BUG: KASAN: slab-use-after-free in reconfig_close_windows+0x1a0/0x4e8
[16386.255043] Read of size 8 at addr c00000014a819670 by task drmgr/696928
[16386.255096] CPU: 29 UID: 0 PID: 696928 Comm: drmgr Kdump: loaded Tainted: G B 6.11.0-rc5-nxgzip #2
[16386.255128] Tainted: [B]=BAD_PAGE
[16386.255148] Hardware name: IBM,9080-HEX Power11 (architected) 0x820200 0xf000007 of:IBM,FW1110.00 (NH1110_016) hv:phyp pSeries
[16386.255181] Call Trace:
[16386.255202] [c00000016b297660] [c0000000018ad0ac] dump_stack_lvl+0x84/0xe8 (unreliable)
[16386.255246] [c00000016b297690] [c0000000006e8a90] print_report+0x19c/0x764
[16386.255285] [c00000016b297760] [c0000000006e9490] kasan_report+0x128/0x1f8
[16386.255309] [c00000016b297880] [c0000000006eb5c8] __asan_load8+0xac/0xe0
[16386.255326] [c00000016b2978a0] [c00000000013f898] reconfig_close_windows+0x1a0/0x4e8
[16386.255343] [c00000016b297990] [c000000000140e58] vas_migration_handler+0x3a4/0x3fc
[16386.255368] [c00000016b297a90] [c000000000128848] pseries_migrate_partition+0x4c/0x4c4
...
[16386.256136] Allocated by task 696554 on cpu 31 at 16377.277618s:
[16386.256149] kasan_save_stack+0x34/0x68
[16386.256163] kasan_save_track+0x34/0x80
[16386.256175] kasan_save_alloc_info+0x58/0x74
[16386.256196] __kasan_slab_alloc+0xb8/0xdc
[16386.256209] kmem_cache_alloc_noprof+0x200/0x3d0
[16386.256225] vm_area_alloc+0x44/0x150
[16386.256245] mmap_region+0x214/0x10c4
[16386.256265] do_mmap+0x5fc/0x750
[16386.256277] vm_mmap_pgoff+0x14c/0x24c
[16386.256292] ksys_mmap_pgoff+0x20c/0x348
[16386.256303] sys_mmap+0xd0/0x160
...
[16386.256350] Freed by task 0 on cpu 31 at 16386.204848s:
[16386.256363] kasan_save_stack+0x34/0x68
[16386.256374] kasan_save_track+0x34/0x80
[16386.256384] kasan_save_free_info+0x64/0x10c
[16386.256396] __kasan_slab_free+0x120/0x204
[16386.256415] kmem_cache_free+0x128/0x450
[16386.256428] vm_area_free_rcu_cb+0xa8/0xd8
[16386.256441] rcu_do_batch+0x2c8/0xcf0
[16386.256458] rcu_core+0x378/0x3c4
[16386.256473] handle_softirqs+0x20c/0x60c
[16386.256495] do_softirq_own_stack+0x6c/0x88
[16386.256509] do_softirq_own_stack+0x58/0x88
[16386.256521] __irq_exit_rcu+0x1a4/0x20c
[16386.256533] irq_exit+0x20/0x38
[16386.256544] interrupt_async_exit_prepare.constprop.0+0x18/0x2c
...
[16386.256717] Last potentially related work creation:
[16386.256729] kasan_save_stack+0x34/0x68
[16386.256741] __kasan_record_aux_stack+0xcc/0x12c
[16386.256753] __call_rcu_common.constprop.0+0x94/0xd04
[16386.256766] vm_area_free+0x28/0x3c
[16386.256778] remove_vma+0xf4/0x114
[16386.256797] do_vmi_align_munmap.constprop.0+0x684/0x870
[16386.256811] __vm_munmap+0xe0/0x1f8
[16386.256821] sys_munmap+0x54/0x6c
[16386.256830] system_call_exception+0x1a0/0x4a0
[16386.256841] system_call_vectored_common+0x15c/0x2ec
[16386.256868] The buggy address belongs to the object at c00000014a819670
which belongs to the cache vm_area_struct of size 168
[16386.256887] The buggy address is located 0 bytes inside of
freed 168-byte region [c00000014a819670, c00000014a819718)
[16386.256915] The buggy address belongs to the physical page:
[16386.256928] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14a81
[16386.256950] memcg:c0000000ba430001
[16386.256961] anon flags: 0x43ffff800000000(node=4|zone=0|lastcpupid=0x7ffff)
[16386.256975] page_type: 0xfdffffff(slab)
[16386.256990] raw: 043ffff800000000 c00000000501c080 0000000000000000 5deadbee00000001
[16386.257003] raw: 0000000000000000 00000000011a011a 00000001fdffffff c0000000ba430001
[16386.257018] page dumped because: kasan: bad access detected
This patch adds close() callback in vas_vm_ops vm_operations_struct
which will be executed during munmap() before freeing VMA. The VMA
address in the VAS window is set to NULL after holding the window
mmap_mutex.
Fixes: 37e6764895 ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241214051758.997759-1-haren@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d8e4771f99c0400a1873235704b28bb803c83d17 upstream.
The "user" pointer was converted from being allocated with kzalloc() to
being allocated by devm_kzalloc(). Calling kfree(user) will lead to a
double free.
Fixes: 6d734f1bfc33 ("mtd: rawnand: atmel: Fix possible memory leak")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d55e8a16f019211163f1180fd9f9fbe05901900 upstream.
The ADMAC attached to the AOP has complex power sequencing, and is
power gated when the probe callback runs. Move the register reads
to other functions, where we can guarantee that the hardware is
switched on.
Fixes: 568aa6dd64 ("dmaengine: apple-admac: Allocate cache SRAM to channels")
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20241124-admac-power-v1-1-58f2165a4d55@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebc008699fd95701c9af5ebaeb0793eef81a71d5 upstream.
Currently, the driver does not return the correct DMA status when a DMA
pause is issued by the client drivers. This causes GPCDMA users to
assume that DMA is still running, while in reality, the DMA is paused.
Return DMA_PAUSED for tx_status() if the channel is paused in the middle
of a transfer.
Fixes: ee17028009 ("dmaengine: tegra: Add tegra gpcdma driver")
Cc: stable@vger.kernel.org
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Link: https://lore.kernel.org/r/20241212124412.5650-1-kkartik@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0e870a0e9c5521f2952ea9f3ea9d3d122631a89 upstream.
The recently submitted fix-commit revealed a problem in the iDMA 32-bit
platform code. Even though the controller supported only a single master
the dw_dma_acpi_filter() method hard-coded two master interfaces with IDs
0 and 1. As a result the sanity check implemented in the commit
b336268dde75 ("dmaengine: dw: Add peripheral bus width verification")
got incorrect interface data width and thus prevented the client drivers
from configuring the DMA-channel with the EINVAL error returned. E.g.,
the next error was printed for the PXA2xx SPI controller driver trying
to configure the requested channels:
> [ 164.525604] pxa2xx_spi_pci 0000:00:07.1: DMA slave config failed
> [ 164.536105] pxa2xx_spi_pci 0000:00:07.1: failed to get DMA TX descriptor
> [ 164.543213] spidev spi-SPT0001:00: SPI transfer failed: -16
The problem would have been spotted much earlier if the iDMA 32-bit
controller supported more than one master interfaces. But since it
supports just a single master and the iDMA 32-bit specific code just
ignores the master IDs in the CTLLO preparation method, the issue has
been gone unnoticed so far.
Fix the problem by specifying the default master ID for both memory
and peripheral devices in the driver data. Thus the issue noticed for
the iDMA 32-bit controllers will be eliminated and the ACPI-probed
DW DMA controllers will be configured with the correct master ID by
default.
Cc: stable@vger.kernel.org
Fixes: b336268dde75 ("dmaengine: dw: Add peripheral bus width verification")
Fixes: 199244d694 ("dmaengine: dw: add support of iDMA 32-bit hardware")
Reported-by: Ferry Toth <fntoth@gmail.com>
Closes: https://lore.kernel.org/dmaengine/ZuXbCKUs1iOqFu51@black.fi.intel.com/
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/dmaengine/ZuXgI-VcHpMgbZ91@black.fi.intel.com/
Tested-by: Ferry Toth <fntoth@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241104095142.157925-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbcbffbac994aca1264e3c14da96ac9bfd90466e upstream.
Currently, the USB port via combophy on the RK3528/RK3588 SoC is broken.
usb usb8-port1: Cannot enable. Maybe the USB cable is bad?
This is due to the combphy of RK3528/RK3588 SoC has multiple resets, but
only "phy resets" need assert and deassert, "apb resets" don't need.
So change the driver to only match the phy resets, which is also what
the vendor kernel does.
Fixes: 7160820d74 ("phy: rockchip: add naneng combo phy for RK3568")
Cc: FUKAUMI Naoki <naoki@radxa.com>
Cc: Michael Zimmermann <sigmaepsilon92@gmail.com>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20241122073006.99309-2-amadeus@jmu.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4dc48c88fcf82b89fdebd83a906aaa64f40fb8a9 upstream.
For devm_phy_destroy(), its comment says it needs to invoke phy_destroy()
to destroy the phy, but it will not actually invoke the function since
devres_destroy() does not call devm_phy_consume(), and the missing
phy_destroy() call will cause that the phy fails to be destroyed.
Fortunately, the faulty API has not been used by current kernel tree.
Fix by using devres_release() instead of devres_destroy() within the API.
Fixes: ff76496347 ("drivers: phy: add generic PHY framework")
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-3-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0b82ab95b4f1fbc3e3aeab9d829d012669524b6 upstream.
For devm_of_phy_provider_unregister(), its comment says it needs to invoke
of_phy_provider_unregister() to unregister the phy provider, but it will
not actually invoke the function since devres_destroy() does not call
devm_phy_provider_release(), and the missing of_phy_provider_unregister()
call will cause:
- The phy provider fails to be unregistered.
- Leak both memory and the OF node refcount.
Fortunately, the faulty API has not been used by current kernel tree.
Fix by using devres_release() instead of devres_destroy() within the API.
Fixes: ff76496347 ("drivers: phy: add generic PHY framework")
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/stable/20241213-phy_core_fix-v6-2-40ae28f5015a%40quicinc.com
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-2-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe4bfa9b6d7bd752bfe4700c937f235aa8ce997b upstream.
For devm_phy_put(), its comment says it needs to invoke phy_put() to
release the phy, but it will not actually invoke the function since
devres_destroy() does not call devm_phy_release(), and the missing
phy_put() call will cause:
- The phy fails to be released.
- devm_phy_put() can not fully undo what API devm_phy_get() does.
- Leak refcount of both the module and device for below typical usage:
devm_phy_get(); // or its variant
...
err = do_something();
if (err)
goto err_out;
...
err_out:
devm_phy_put(); // leak refcount here
The file(s) affected by this issue are shown below since they have such
typical usage.
drivers/pci/controller/cadence/pcie-cadence.c
drivers/net/ethernet/ti/am65-cpsw-nuss.c
Fix by using devres_release() instead of devres_destroy() within the API.
Fixes: ff76496347 ("drivers: phy: add generic PHY framework")
Cc: stable@vger.kernel.org
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Krzysztof Wilczyński <kw@linux.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-1-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2d633cb1421e679b56f1a9fe1f42f089706f1ed upstream.
For macro for_each_child_of_node(parent, child), refcount of @child has
been increased before entering its loop body, so normally needs to call
of_node_put(@child) before returning from the loop body to avoid refcount
leakage.
of_phy_provider_lookup() has such usage but does not call of_node_put()
before returning, so cause leakage of the OF node refcount.
Fix by simply calling of_node_put() before returning from the loop body.
The APIs affected by this issue are shown below since they indirectly
invoke problematic of_phy_provider_lookup().
phy_get()
of_phy_get()
devm_phy_get()
devm_of_phy_get()
devm_of_phy_get_by_index()
Fixes: 2a4c37016c ("phy: core: Fix of_phy_provider_lookup to return PHY provider for sub node")
Cc: stable@vger.kernel.org
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-5-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ebdc6be16c2000e37fcb8b4072d442d268ad492 upstream.
_of_phy_get() will directly return when suffers of_device_is_compatible()
error, but it forgets to decrease refcount of OF node @args.np before error
return, the refcount was increased by previous of_parse_phandle_with_args()
so causes the OF node's refcount leakage.
Fix by decreasing the refcount via of_node_put() before the error return.
Fixes: b7563e2796 ("phy: work around 'phys' references to usb-nop-xceiv devices")
Cc: stable@vger.kernel.org
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20241213-phy_core_fix-v6-4-40ae28f5015a@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11e6831fd81468cf48155b9b3c11295c391da723 upstream.
The NAND chip-selects are registered for the Arasan driver during
initialization but are not de-registered when the driver is unloaded. As a
result, if the driver is loaded again, the chip-selects remain registered
and busy, making them unavailable for use.
Fixes: 197b88fecc ("mtd: rawnand: arasan: Add new Arasan NAND controller")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej Andrzejewski ICEYE <maciej.andrzejewski@m-works.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b086a46dae48829e11c0c02580e30d920b76743c upstream.
When two chip-selects are configured in the device tree, and the second is
a non-native GPIO, both the GPIO-based chip-select and the first native
chip-select may be asserted simultaneously. This double assertion causes
incorrect read and write operations.
The issue occurs because when nfc->ncs <= 2, nfc->spare_cs is always
initialized to 0 due to static initialization. Consequently, when the
second chip-select (GPIO-based) is selected in anfc_assert_cs(), it is
detected by anfc_is_gpio_cs(), and nfc->native_cs is assigned the value 0.
This results in both the GPIO-based chip-select being asserted and the
NAND controller register receiving 0, erroneously selecting the native
chip-select.
This patch resolves the issue, as confirmed by oscilloscope testing with
configurations involving two or more chip-selects in the device tree.
Fixes: acbd3d0945 ("mtd: rawnand: arasan: Leverage additional GPIO CS")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej Andrzejewski <maciej.andrzejewski@m-works.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b458e8be0d13e81ed03fffa23f8f9b528bbd786 upstream.
There may be a potential integer overflow issue in inftl_partscan().
parts[0].size is defined as "uint64_t" while mtd->erasesize and
ip->firstUnit are defined as 32-bit unsigned integer. The result of
the calculation will be limited to 32 bits without correct casting.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7917f01a286ce01e9c085e24468421f596ee1a0c ]
A recent patch inadvertently broke callbacks for NFSv4.0.
In the 4.0 case we do not expect a session to be found but still need to
call setup_callback_client() which will not try to dereference it.
This patch moves the check for failure to find a session into the 4.1+
branch of setup_callback_client()
Fixes: 1e02c641c3a4 ("NFSD: Prevent NULL dereference in nfsd4_process_cb_update()")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ecc4d858b92c1bb0673ad9c327298e600c55659 ]
skb_network_offset() and skb_transport_offset() can be negative when
they are called after we pull the transport header, for example, when
we use eBPF sockmap at the point of ->sk_data_ready().
__bpf_skb_min_len() uses an unsigned int to get these offsets, this
leads to a very large number which then causes bpf_skb_change_tail()
failed unexpectedly.
Fix this by using a signed int to get these offsets and ensure the
minimum is at least zero.
Fixes: 5293efe62d ("bpf: add bpf_skb_change_tail helper")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241213034057.246437-2-xiyou.wangcong@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d888b7af7c149c115dd6ac772cc11c375da3e17c ]
When we do sk_psock_verdict_apply->sk_psock_skb_ingress, an sk_msg will
be created out of the skb, and the rmem accounting of the sk_msg will be
handled by the skb.
For skmsgs in __SK_REDIRECT case of tcp_bpf_send_verdict, when redirecting
to the ingress of a socket, although we sk_rmem_schedule and add sk_msg to
the ingress_msg of sk_redir, we do not update sk_rmem_alloc. As a result,
except for the global memory limit, the rmem of sk_redir is nearly
unlimited. Thus, add sk_rmem_alloc related logic to limit the recv buffer.
Since the function sk_msg_recvmsg and __sk_psock_purge_ingress_msg are
used in these two paths. We use "msg->skb" to test whether the sk_msg is
skb backed up. If it's not, we shall do the memory accounting explicitly.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241210012039.1669389-3-zijianzhang@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54f89b3178d5448dd4457afbb98fc1ab99090a65 ]
When bpf_tcp_ingress() is called, the skmsg is being redirected to the
ingress of the destination socket. Therefore, we should charge its
receive socket buffer, instead of sending socket buffer.
Because sk_rmem_schedule() tests pfmemalloc of skb, we need to
introduce a wrapper and call it for skmsg.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241210012039.1669389-2-zijianzhang@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30c2de0a267c04046d89e678cc0067a9cfb455df ]
Fix the following clang compiler warning that is reported if the kernel is
built with W=1:
./include/linux/vmstat.h:518:36: error: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Werror,-Wenum-enum-conversion]
518 | return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_"
| ~~~~~~~~~~~ ^ ~~~
Link: https://lkml.kernel.org/r/20241212213126.1269116-1-bvanassche@acm.org
Fixes: 9d7ea9a297 ("mm/vmstat: add helpers to get vmstat item names for each enum type")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2dd59fe0e19e1ab955259978082b62e5751924c7 ]
Syzbot reports [1] an uninitialized value issue found by KMSAN in
dib3000_read_reg().
Local u8 rb[2] is used in i2c_transfer() as a read buffer; in case
that call fails, the buffer may end up with some undefined values.
Since no elaborate error handling is expected in dib3000_write_reg(),
simply zero out rb buffer to mitigate the problem.
[1] Syzkaller report
dvb-usb: bulk message failed: -22 (6/0)
=====================================================
BUG: KMSAN: uninit-value in dib3000mb_attach+0x2d8/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758
dib3000mb_attach+0x2d8/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758
dibusb_dib3000mb_frontend_attach+0x155/0x2f0 drivers/media/usb/dvb-usb/dibusb-mb.c:31
dvb_usb_adapter_frontend_init+0xed/0x9a0 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:290
dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:90 [inline]
dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:186 [inline]
dvb_usb_device_init+0x25a8/0x3760 drivers/media/usb/dvb-usb/dvb-usb-init.c:310
dibusb_probe+0x46/0x250 drivers/media/usb/dvb-usb/dibusb-mb.c:110
...
Local variable rb created at:
dib3000_read_reg+0x86/0x4e0 drivers/media/dvb-frontends/dib3000mb.c:54
dib3000mb_attach+0x123/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758
...
Fixes: 74340b0a8b ("V4L/DVB (4457): Remove dib3000-common-module")
Reported-by: syzbot+c88fc0ebe0d5935c70da@syzkaller.appspotmail.com
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20240517155800.9881-1-n.zhandarovich@fintech.ru
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
