[ Upstream commit cbd070a4ae62f119058973f6d2c984e325bce6e7 ]
Use pe directly to resolve sparse warning:
net/netfilter/ipvs/ip_vs_ctl.c:1471:27: warning: dereference of noderef expression
Fixes: 39b9722315 ("ipvs: handle connections started by real-servers")
Signed-off-by: Chen Hanxiao <chenhx.fnst@fujitsu.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[ Resolve minor conflicts to fix CVE-2024-42322 ]
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6630036b7c228f57c7893ee0403e92c2db2cd21d ]
If an iget fails due to not being able to retrieve information
from the server then the inode structure is only partially
initialized. When the inode gets evicted, references to
uninitialized structures (like fscache cookies) were being
made.
This patch checks for a bad_inode before doing anything other
than clearing the inode from the cache. Since the inode is
bad, it shouldn't have any state associated with it that needs
to be written back (and there really isn't a way to complete
those anyways).
Reported-by: syzbot+eb83fe1cce5833cd66a0@syzkaller.appspotmail.com
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
(cherry picked from commit 1b4cb6e91f19b81217ad98142ee53a1ab25893fd)
[Xiangyu: CVE-2024-36923 Minor conflict resolution due to missing 4eb31178 ]
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a80a486d72e20bd12c335bcd38b6e6f19356b0aa upstream.
If ->NameOffset of smb2_create_req is smaller than Buffer offset of
smb2_create_req, slab-out-of-bounds read can happen from smb2_open.
This patch set the minimum value of the name offset to the buffer offset
to validate name length of smb2_create_req().
Cc: stable@vger.kernel.org
Reported-by: Xuanzhe Yu <yuxuanzhe@outlook.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: c6cd2e8d2d9a ("ksmbd: fix potencial out-of-bounds when buffer offset is invalid")
Signed-off-by: Vamsi Krishna Brahmajosyula <vamsi-krishna.brahmajosyula@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db3eab8110bc0520416101b6a5b52f44a43fb4cf upstream.
In mptcp_pm_create_subflow_or_signal_addr(), rcu_read_(un)lock() are
used as expected to iterate over the list of local addresses, but
list_for_each_entry() was used instead of list_for_each_entry_rcu() in
__lookup_addr(). It is important to use this variant which adds the
required READ_ONCE() (and diagnostic checks if enabled).
Because __lookup_addr() is also used in mptcp_pm_nl_set_flags() where it
is called under the pernet->lock and not rcu_read_lock(), an extra
condition is then passed to help the diagnostic checks making sure
either the associated spin lock or the RCU lock is held.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-3-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af250c27ea1c404e210fc3a308b20f772df584d6 upstream.
When the lookup_by_id parameter of __lookup_addr() is true, it's the same
as __lookup_addr_by_id(), it can be replaced by __lookup_addr_by_id()
directly. So drop this parameter, let __lookup_addr() only looks up address
on the local address list by comparing addresses in it, not address ids.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-mptcp-misc-cleanup-v1-4-c436ba5e569b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: db3eab8110bc ("mptcp: pm: use _rcu variant under rcu_read_lock")
[ Conflicts in pm_netlink.c, because commit 6a42477fe449 ("mptcp: update
set_flags interfaces") is not in this version, and causes too many
conflicts when backporting it. The conflict is easy to resolve: addr
is a pointer here here in mptcp_pm_nl_set_flags(), the rest of the
code is the same. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0266319413d5d687ba7b6df7ca99e4b9724a4f2 upstream.
Just like in-kernel pm, when userspace pm does set_flags, it needs to send
out MP_PRIO signal, and also modify the flags of the corresponding address
entry in the local address list. This patch implements the missing logic.
Traverse all address entries on userspace_pm_local_addr_list to find the
local address entry, if bkup is true, set the flags of this entry with
FLAG_BACKUP, otherwise, clear FLAG_BACKUP.
Fixes: 892f396c8e ("mptcp: netlink: issue MP_PRIO signals from userspace PMs")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-1-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in pm_userspace.c, because commit 6a42477fe449 ("mptcp:
update set_flags interfaces"), is not in this version, and causes too
many conflicts when backporting it. The same code can still be added
at the same place, before sending the ACK. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 06afe09091ee69dc7ab058b4be9917ae59cc81e5 upstream.
Corresponding __lookup_addr_by_id() helper in the in-kernel netlink PM,
this patch adds a new helper mptcp_userspace_pm_lookup_addr_by_id() to
lookup the address entry with the given id on the userspace pm local
address list.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: f642c5c4d528 ("mptcp: hold pm lock when deleting entry")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce7356ae35943cc6494cc692e62d51a734062b7d upstream.
Additional active subflows - i.e. created by the in kernel path
manager - are included into the subflow list before starting the
3whs.
A racing recvmsg() spooling data received on an already established
subflow would unconditionally call tcp_cleanup_rbuf() on all the
current subflows, potentially hitting a divide by zero error on
the newly created ones.
Explicitly check that the subflow is in a suitable state before
invoking tcp_cleanup_rbuf().
Fixes: c76c695656 ("mptcp: call tcp_cleanup_rbuf on subflows")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/02374660836e1b52afc91966b7535c8c5f7bafb0.1731060874.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in protocol.c, because commit f410cbea9f3d ("tcp: annotate
data-races around tp->window_clamp") has not been backported to this
version. The conflict is easy to resolve, because only the context is
different, but not the line to modify. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8286f8b622990194207df9ab852e0f87c60d35e9 ]
The error flow in nfsd4_copy() calls cleanup_async_copy(), which
already decrements nn->pending_async_copies.
Reported-by: Olga Kornievskaia <okorniev@redhat.com>
Fixes: aadc3bbea163 ("NFSD: Limit the number of concurrent async COPY operations")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 63fab04cbd0f96191b6e5beedc3b643b01c15889 ]
Ensure the refcount and async_copies fields are initialized early.
cleanup_async_copy() will reference these fields if an error occurs
in nfsd4_copy(). If they are not correctly initialized, at the very
least, a refcount underflow occurs.
Reported-by: Olga Kornievskaia <okorniev@redhat.com>
Fixes: aadc3bbea163 ("NFSD: Limit the number of concurrent async COPY operations")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit aadc3bbea163b6caaaebfdd2b6c4667fbc726752 ]
Nothing appears to limit the number of concurrent async COPY
operations that clients can start. In addition, AFAICT each async
COPY can copy an unlimited number of 4MB chunks, so can run for a
long time. Thus IMO async COPY can become a DoS vector.
Add a restriction mechanism that bounds the number of concurrent
background COPY operations. Start simple and try to be fair -- this
patch implements a per-namespace limit.
An async COPY request that occurs while this limit is exceeded gets
NFS4ERR_DELAY. The requesting client can choose to send the request
again after a delay or fall back to a traditional read/write style
copy.
If there is need to make the mechanism more sophisticated, we can
visit that in future patches.
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://nvd.nist.gov/vuln/detail/CVE-2024-49974
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9ed666eba4e0a2bb8ffaa3739d830b64d4f2aaad ]
Currently, when NFSD handles an asynchronous COPY, it returns a
zero write verifier, relying on the subsequent CB_OFFLOAD callback
to pass the write verifier and a stable_how4 value to the client.
However, if the CB_OFFLOAD never arrives at the client (for example,
if a network partition occurs just as the server sends the
CB_OFFLOAD operation), the client will never receive this verifier.
Thus, if the client sends a follow-up COMMIT, there is no way for
the client to assess the COMMIT result.
The usual recovery for a missing CB_OFFLOAD is for the client to
send an OFFLOAD_STATUS operation, but that operation does not carry
a write verifier in its result. Neither does it carry a stable_how4
value, so the client /must/ send a COMMIT in this case -- which will
always fail because currently there's still no write verifier in the
COPY result.
Thus the server needs to return a normal write verifier in its COPY
result even if the COPY operation is to be performed asynchronously.
If the server recognizes the callback stateid in subsequent
OFFLOAD_STATUS operations, then obviously it has not restarted, and
the write verifier the client received in the COPY result is still
valid and can be used to assess a COMMIT of the copied data, if one
is needed.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
[ cel: adjusted to apply to origin/linux-6.1.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When commit 0cab68720598 ("cxl/pci: Fix disabling memory if DVSEC CXL
Range does not match a CFMWS window") was backported, this chunk moved
from the cxl_hdm_decode_init() function which returns negative error
codes to the __cxl_hdm_decode_init() function which returns false on
error. So the error code needs to be modified from -ENXIO to false.
This issue only exits in the 6.1.y kernels. In later kernels negative
error codes are correct and the driver didn't exist in earlier kernels.
Fixes: 0312171289 ("cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The parse_build_id_buf does not account Elf32_Nhdr header size
when getting the build id data pointer and returns wrong build
id data as result.
This is problem only for stable trees that merged 84887f4c1c
fix, the upstream build id code was refactored and returns proper
build id.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Fixes: 84887f4c1c ("lib/buildid: harden build ID parsing logic")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4e2766102da632f26341d5539519b0abf73df887 ]
The whole benefit of this encapsulating struct is questionable.
It just stores a flag to signalize the init state of vchiq_arm_state.
Beside the fact this flag is set too soon, the access to uninitialized
members should be avoided. So initialize vchiq_arm_state properly before
assign it directly to vchiq_state.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240621131958.98208-6-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 404b739e8955 ("staging: vchiq_arm: Use devm_kzalloc() for vchiq_arm_state allocation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 85b580afc2c215394e08974bf033de9face94955 upstream.
It turns out that the Allwinner A100/A133 SoC only supports 8K DMA
blocks (13 bits wide), for both the SD/SDIO and eMMC instances.
And while this alone would make a trivial fix, the H616 falls back to
the A100 compatible string, so we have to now match the H616 compatible
string explicitly against the description advertising 64K DMA blocks.
As the A100 is now compatible with the D1 description, let the A100
compatible string point to that block instead, and introduce an explicit
match against the H616 string, pointing to the old description.
Also remove the redundant setting of clk_delays to NULL on the way.
Fixes: 3536b82e58 ("mmc: sunxi: add support for A100 mmc controller")
Cc: stable@vger.kernel.org
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Parthiban Nallathambi <parthiban@linumiz.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Message-ID: <20241107014240.24669-1-andre.przywara@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2026559a6c4ce34db117d2db8f710fe2a9420d5a upstream.
When using the "block:block_dirty_buffer" tracepoint, mark_buffer_dirty()
may cause a NULL pointer dereference, or a general protection fault when
KASAN is enabled.
This happens because, since the tracepoint was added in
mark_buffer_dirty(), it references the dev_t member bh->b_bdev->bd_dev
regardless of whether the buffer head has a pointer to a block_device
structure.
In the current implementation, nilfs_grab_buffer(), which grabs a buffer
to read (or create) a block of metadata, including b-tree node blocks,
does not set the block device, but instead does so only if the buffer is
not in the "uptodate" state for each of its caller block reading
functions. However, if the uptodate flag is set on a folio/page, and the
buffer heads are detached from it by try_to_free_buffers(), and new buffer
heads are then attached by create_empty_buffers(), the uptodate flag may
be restored to each buffer without the block device being set to
bh->b_bdev, and mark_buffer_dirty() may be called later in that state,
resulting in the bug mentioned above.
Fix this issue by making nilfs_grab_buffer() always set the block device
of the super block structure to the buffer head, regardless of the state
of the buffer's uptodate flag.
Link: https://lkml.kernel.org/r/20241106160811.3316-3-konishi.ryusuke@gmail.com
Fixes: 5305cb8308 ("block: add block_{touch|dirty}_buffer tracepoint")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ubisectech Sirius <bugreport@valiantsec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa0d42cacf093a6fcca872edc954f6f812926a17 upstream.
Hide KVM's pt_mode module param behind CONFIG_BROKEN, i.e. disable support
for virtualizing Intel PT via guest/host mode unless BROKEN=y. There are
myriad bugs in the implementation, some of which are fatal to the guest,
and others which put the stability and health of the host at risk.
For guest fatalities, the most glaring issue is that KVM fails to ensure
tracing is disabled, and *stays* disabled prior to VM-Enter, which is
necessary as hardware disallows loading (the guest's) RTIT_CTL if tracing
is enabled (enforced via a VMX consistency check). Per the SDM:
If the logical processor is operating with Intel PT enabled (if
IA32_RTIT_CTL.TraceEn = 1) at the time of VM entry, the "load
IA32_RTIT_CTL" VM-entry control must be 0.
On the host side, KVM doesn't validate the guest CPUID configuration
provided by userspace, and even worse, uses the guest configuration to
decide what MSRs to save/load at VM-Enter and VM-Exit. E.g. configuring
guest CPUID to enumerate more address ranges than are supported in hardware
will result in KVM trying to passthrough, save, and load non-existent MSRs,
which generates a variety of WARNs, ToPA ERRORs in the host, a potential
deadlock, etc.
Fixes: f99e3daf94 ("KVM: x86: Add Intel PT virtualization work mode")
Cc: stable@vger.kernel.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241101185031.1799556-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3ddef46f22e8c3124e0df1f325bc6a18dadff39 upstream.
Always set irr_pending (to true) when updating APICv status to fix a bug
where KVM fails to set irr_pending when userspace sets APIC state and
APICv is disabled, which ultimate results in KVM failing to inject the
pending interrupt(s) that userspace stuffed into the vIRR, until another
interrupt happens to be emulated by KVM.
Only the APICv-disabled case is flawed, as KVM forces apic->irr_pending to
be true if APICv is enabled, because not all vIRR updates will be visible
to KVM.
Hit the bug with a big hammer, even though strictly speaking KVM can scan
the vIRR and set/clear irr_pending as appropriate for this specific case.
The bug was introduced by commit 755c2bf878 ("KVM: x86: lapic: don't
touch irr_pending in kvm_apic_update_apicv when inhibiting it"), which as
the shortlog suggests, deleted code that updated irr_pending.
Before that commit, kvm_apic_update_apicv() did indeed scan the vIRR, with
with the crucial difference that kvm_apic_update_apicv() did the scan even
when APICv was being *disabled*, e.g. due to an AVIC inhibition.
struct kvm_lapic *apic = vcpu->arch.apic;
if (vcpu->arch.apicv_active) {
/* irr_pending is always true when apicv is activated. */
apic->irr_pending = true;
apic->isr_count = 1;
} else {
apic->irr_pending = (apic_search_irr(apic) != -1);
apic->isr_count = count_vectors(apic->regs + APIC_ISR);
}
And _that_ bug (clearing irr_pending) was introduced by commit b26a695a1d
("kvm: lapic: Introduce APICv update helper function"), prior to which KVM
unconditionally set irr_pending to true in kvm_apic_set_state(), i.e.
assumed that the new virtual APIC state could have a pending IRQ.
Furthermore, in addition to introducing this issue, commit 755c2bf878
also papered over the underlying bug: KVM doesn't ensure CPUs and devices
see APICv as disabled prior to searching the IRR. Waiting until KVM
emulates an EOI to update irr_pending "works", but only because KVM won't
emulate EOI until after refresh_apicv_exec_ctrl(), and there are plenty of
memory barriers in between. I.e. leaving irr_pending set is basically
hacking around bad ordering.
So, effectively revert to the pre-b26a695a1d78 behavior for state restore,
even though it's sub-optimal if no IRQs are pending, in order to provide a
minimal fix, but leave behind a FIXME to document the ugliness. With luck,
the ordering issue will be fixed and the mess will be cleaned up in the
not-too-distant future.
Fixes: 755c2bf878 ("KVM: x86: lapic: don't touch irr_pending in kvm_apic_update_apicv when inhibiting it")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Reported-by: Yong He <zhuangel570@gmail.com>
Closes: https://lkml.kernel.org/r/20241023124527.1092810-1-alexyonghe%40tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20241106015135.2462147-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2657b82a78f18528bef56dc1b017158490970873 upstream.
When getting the current VPID, e.g. to emulate a guest TLB flush, return
vpid01 if L2 is running but with VPID disabled, i.e. if VPID is disabled
in vmcs12. Architecturally, if VPID is disabled, then the guest and host
effectively share VPID=0. KVM emulates this behavior by using vpid01 when
running an L2 with VPID disabled (see prepare_vmcs02_early_rare()), and so
KVM must also treat vpid01 as the current VPID while L2 is active.
Unconditionally treating vpid02 as the current VPID when L2 is active
causes KVM to flush TLB entries for vpid02 instead of vpid01, which
results in TLB entries from L1 being incorrectly preserved across nested
VM-Enter to L2 (L2=>L1 isn't problematic, because the TLB flush after
nested VM-Exit flushes vpid01).
The bug manifests as failures in the vmx_apicv_test KVM-Unit-Test, as KVM
incorrectly retains TLB entries for the APIC-access page across a nested
VM-Enter.
Opportunisticaly add comments at various touchpoints to explain the
architectural requirements, and also why KVM uses vpid01 instead of vpid02.
All credit goes to Chao, who root caused the issue and identified the fix.
Link: https://lore.kernel.org/all/ZwzczkIlYGX+QXJz@intel.com
Fixes: 2b4a5a5d56 ("KVM: nVMX: Flush current VPID (L1 vs. L2) for KVM_REQ_TLB_FLUSH_GUEST")
Cc: stable@vger.kernel.org
Cc: Like Xu <like.xu.linux@gmail.com>
Debugged-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Tested-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20241031202011.1580522-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 923168a0631bc42fffd55087b337b1b6c54dcff5 upstream.
Function ima_eventdigest_init() calls ima_eventdigest_init_common()
with HASH_ALGO__LAST which is then used to access the array
hash_digest_size[] leading to buffer overrun. Have a conditional
statement to handle this.
Fixes: 9fab303a2c ("ima: fix violation measurement list record")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Tested-by: Enrico Bravi (PhD at polito.it) <enrico.bravi@huawei.com>
Cc: stable@vger.kernel.org # 5.19+
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29ce8b8a4fa74e841342c8b8f8941848a3c6f29f upstream.
When calculating the physical address range based on the iotlb and mr
[start,end) ranges, the offset of mr->start relative to map->start
is not taken into account. This leads to some incorrect and duplicate
mappings.
For the case when mr->start < map->start the code is already correct:
the range in [mr->start, map->start) was handled by a different
iteration.
Fixes: 94abbccdf2 ("vdpa/mlx5: Add shared memory registration code")
Cc: stable@vger.kernel.org
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20241021134040.975221-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 737f34137844d6572ab7d473c998c7f977ff30eb upstream.
Syzbot has reported the following BUG:
kernel BUG at fs/ocfs2/uptodate.c:509!
...
Call Trace:
<TASK>
? __die_body+0x5f/0xb0
? die+0x9e/0xc0
? do_trap+0x15a/0x3a0
? ocfs2_set_new_buffer_uptodate+0x145/0x160
? do_error_trap+0x1dc/0x2c0
? ocfs2_set_new_buffer_uptodate+0x145/0x160
? __pfx_do_error_trap+0x10/0x10
? handle_invalid_op+0x34/0x40
? ocfs2_set_new_buffer_uptodate+0x145/0x160
? exc_invalid_op+0x38/0x50
? asm_exc_invalid_op+0x1a/0x20
? ocfs2_set_new_buffer_uptodate+0x2e/0x160
? ocfs2_set_new_buffer_uptodate+0x144/0x160
? ocfs2_set_new_buffer_uptodate+0x145/0x160
ocfs2_group_add+0x39f/0x15a0
? __pfx_ocfs2_group_add+0x10/0x10
? __pfx_lock_acquire+0x10/0x10
? mnt_get_write_access+0x68/0x2b0
? __pfx_lock_release+0x10/0x10
? rcu_read_lock_any_held+0xb7/0x160
? __pfx_rcu_read_lock_any_held+0x10/0x10
? smack_log+0x123/0x540
? mnt_get_write_access+0x68/0x2b0
? mnt_get_write_access+0x68/0x2b0
? mnt_get_write_access+0x226/0x2b0
ocfs2_ioctl+0x65e/0x7d0
? __pfx_ocfs2_ioctl+0x10/0x10
? smack_file_ioctl+0x29e/0x3a0
? __pfx_smack_file_ioctl+0x10/0x10
? lockdep_hardirqs_on_prepare+0x43d/0x780
? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10
? __pfx_ocfs2_ioctl+0x10/0x10
__se_sys_ioctl+0xfb/0x170
do_syscall_64+0xf3/0x230
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
When 'ioctl(OCFS2_IOC_GROUP_ADD, ...)' has failed for the particular
inode in 'ocfs2_verify_group_and_input()', corresponding buffer head
remains cached and subsequent call to the same 'ioctl()' for the same
inode issues the BUG() in 'ocfs2_set_new_buffer_uptodate()' (trying
to cache the same buffer head of that inode). Fix this by uncaching
the buffer head with 'ocfs2_remove_from_cache()' on error path in
'ocfs2_group_add()'.
Link: https://lkml.kernel.org/r/20241114043844.111847-1-dmantipov@yandex.ru
Fixes: 7909f2bf83 ("[PATCH 2/2] ocfs2: Implement group add for online resize")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reported-by: syzbot+453873f1588c2d75b447@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=453873f1588c2d75b447
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Dmitry Antipov <dmantipov@yandex.ru>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ce41b0f9d77cca074df25afd39b86e2ee3aa68e upstream.
We triggered a NULL pointer dereference for ac.preferred_zoneref->zone in
alloc_pages_bulk_noprof() when the task is migrated between cpusets.
When cpuset is enabled, in prepare_alloc_pages(), ac->nodemask may be
¤t->mems_allowed. when first_zones_zonelist() is called to find
preferred_zoneref, the ac->nodemask may be modified concurrently if the
task is migrated between different cpusets. Assuming we have 2 NUMA Node,
when traversing Node1 in ac->zonelist, the nodemask is 2, and when
traversing Node2 in ac->zonelist, the nodemask is 1. As a result, the
ac->preferred_zoneref points to NULL zone.
In alloc_pages_bulk_noprof(), for_each_zone_zonelist_nodemask() finds a
allowable zone and calls zonelist_node_idx(ac.preferred_zoneref), leading
to NULL pointer dereference.
__alloc_pages_noprof() fixes this issue by checking NULL pointer in commit
ea57485af8 ("mm, page_alloc: fix check for NULL preferred_zone") and
commit df76cee6bb ("mm, page_alloc: remove redundant checks from alloc
fastpath").
To fix it, check NULL pointer for preferred_zoneref->zone.
Link: https://lkml.kernel.org/r/20241113083235.166798-1-tujinjiang@huawei.com
Fixes: 387ba26fb1 ("mm/page_alloc: add a bulk page allocator")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Lobakin <alobakin@pm.me>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d9ffb2fe65a6c4ef114e8d4f947958a12751bbe upstream.
The kdump kernel is broken on SME systems with CONFIG_IMA_KEXEC=y enabled.
Debugging traced the issue back to
b69a2afd5a ("x86/kexec: Carry forward IMA measurement log on kexec").
Testing was previously not conducted on SME systems with CONFIG_IMA_KEXEC
enabled, which led to the oversight, with the following incarnation:
...
ima: No TPM chip found, activating TPM-bypass!
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 18ae0bc7e79b64700122bb1d6a904b070fef2656'
ima: Allocated hash algorithm: sha256
Oops: general protection fault, probably for non-canonical address 0xcfacfdfe6660003e: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-rc2+ #14
Hardware name: Dell Inc. PowerEdge R7425/02MJ3T, BIOS 1.20.0 05/03/2023
RIP: 0010:ima_restore_measurement_list
Call Trace:
<TASK>
? show_trace_log_lvl
? show_trace_log_lvl
? ima_load_kexec_buffer
? __die_body.cold
? die_addr
? exc_general_protection
? asm_exc_general_protection
? ima_restore_measurement_list
? vprintk_emit
? ima_load_kexec_buffer
ima_load_kexec_buffer
ima_init
? __pfx_init_ima
init_ima
? __pfx_init_ima
do_one_initcall
do_initcalls
? __pfx_kernel_init
kernel_init_freeable
kernel_init
ret_from_fork
? __pfx_kernel_init
ret_from_fork_asm
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
...
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
Rebooting in 10 seconds..
Adding debug printks showed that the stored addr and size of ima_kexec buffer
are not decrypted correctly like:
ima: ima_load_kexec_buffer, buffer:0xcfacfdfe6660003e, size:0xe48066052d5df359
Three types of setup_data info
— SETUP_EFI,
- SETUP_IMA, and
- SETUP_RNG_SEED
are passed to the kexec/kdump kernel. Only the ima_kexec buffer
experienced incorrect decryption. Debugging identified a bug in
early_memremap_is_setup_data(), where an incorrect range calculation
occurred due to the len variable in struct setup_data ended up only
representing the length of the data field, excluding the struct's size,
and thus leading to miscalculation.
Address a similar issue in memremap_is_setup_data() while at it.
[ bp: Heavily massage. ]
Fixes: b3c72fc9a7 ("x86/boot: Introduce setup_indirect")
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240911081615.262202-3-bhe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ed6cbe6e5563452f305e89c15846820f2874e431 ]
The patchset introducing kernel_sec_start/end variables to separate the
kernel/lowmem memory mappings, broke the mapping of the kernel memory
for xipkernels.
kernel_sec_start/end variables are in RO area before the MMU is switched
on for xipkernels.
So these cannot be set early in boot in head.S. Fix this by setting these
after MMU is switched on.
xipkernels need two different mappings for kernel text (starting at
CONFIG_XIP_PHYS_ADDR) and data (starting at CONFIG_PHYS_OFFSET).
Also, move the kernel code mapping from devicemaps_init() to map_kernel().
Fixes: a91da54570 ("ARM: 9089/1: Define kernel physical section start and end")
Signed-off-by: Harith George <harith.g@alifsemi.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8eb36164d1a6769a20ed43033510067ff3dab9ee ]
Commit 4598380f9c ("bonding: fix ns validation on backup slaves")
tried to resolve the issue where backup slaves couldn't be brought up when
receiving IPv6 Neighbor Solicitation (NS) messages. However, this fix only
worked for drivers that receive all multicast messages, such as the veth
interface.
For standard drivers, the NS multicast message is silently dropped because
the slave device is not a member of the NS target multicast group.
To address this, we need to make the slave device join the NS target
multicast group, ensuring it can receive these IPv6 NS messages to validate
the slave’s status properly.
There are three policies before joining the multicast group:
1. All settings must be under active-backup mode (alb and tlb do not support
arp_validate), with backup slaves and slaves supporting multicast.
2. We can add or remove multicast groups when arp_validate changes.
3. Other operations, such as enslaving, releasing, or setting NS targets,
need to be guarded by arp_validate.
Fixes: 4e24be018e ("bonding: add new parameter ns_targets")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73af53d82076bbe184d9ece9e14b0dc8599e6055 ]
To generate hnode handles (in gen_new_htid()), u32 uses IDR and
encodes the returned small integer into a structured 32-bit
word. Unfortunately, at disposal time, the needed decoding
is not done. As a result, idr_remove() fails, and the IDR
fills up. Since its size is 2048, the following script ends up
with "Filter already exists":
tc filter add dev myve $FILTER1
tc filter add dev myve $FILTER2
for i in {1..2048}
do
echo $i
tc filter del dev myve $FILTER2
tc filter add dev myve $FILTER2
done
This patch adds the missing decoding logic for handles that
deserve it.
Fixes: e7614370d6 ("net_sched: use idr to allocate u32 filter handles")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20241110172836.331319-1-alexandre.ferrieux@orange.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b78debe1c07e6aa3c91ca0b1384bf3cb8217c50 ]
Proper refcounts will always warn splat when something goes wrong,
be it underflow, saturation or object resurrection. As these are always
a source of bugs, use it in cls_u32 as a safeguard to prevent/catch issues.
Another benefit is that the refcount API self documents the code, making
clear when transitions to dead are expected.
For such an update we had to make minor adaptations on u32 to fit the refcount
API. First we set explicitly to '1' when objects are created, then the
objects are alive until a 1 -> 0 happens, which is then released appropriately.
The above made clear some redundant operations in the u32 code
around the root_ht handling that were removed. The root_ht is created
with a refcnt set to 1. Then when it's associated with tcf_proto it increments the refcnt to 2.
Throughout the entire code the root_ht is an exceptional case and can never be referenced,
therefore the refcnt never incremented/decremented.
Its lifetime is always bound to tcf_proto, meaning if you delete tcf_proto
the root_ht is deleted as well. The code made up for the fact that root_ht refcnt is 2 and did
a double decrement to free it, which is not a fit for the refcount API.
Even though refcount_t is implemented using atomics, we should observe
a negligible control plane impact.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231114141856.974326-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 73af53d82076 ("net: sched: cls_u32: Fix u32's systematic failure to free IDR entries for hnodes.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
