[ Upstream commit e95cc44763 ]
Currently, when a high prio link enslaved, or when current link down,
the high prio port could be selected. But when high prio link up, the
new active slave reselection is not triggered. Fix it by checking link's
prio when getting up. Making the do_failover after looping all slaves as
there may be multi high prio slaves up.
Reported-by: Liang Li <liali@redhat.com>
Fixes: 0a2ff7cc8a ("Bonding: add per-port priority for failover re-selection")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d0b738fc5 ]
There is one direct accesses to bond->curr_active_slave in
bond_miimon_commit(). Protected it by rcu_access_pointer()
since the later of this function also use this one.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: e95cc44763 ("bonding: do failover when high prio link up")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fb45f95ee ]
The for-loop was broken from the start. It translates to:
for (i = 0; i < 4; i += 4)
which means the loop statement is run only once, so only the highest
32-bit of the IPv6 address gets mangled.
Fix the loop increment.
Fixes: 0e07e25b48 ("netfilter: flowtable: fix NAT IPv6 offload mangling")
Fixes: 5c27d8d76c ("netfilter: nf_flow_table_offload: add IPv6 support")
Signed-off-by: Qingfang DENG <dqfext@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9aafbfa5f5 ]
rtas-error-log-max is not the name of an RTAS function, so rtas_token()
is not the appropriate API for retrieving its value. We already have
rtas_get_error_log_max() which returns a sensible value if the property
is absent for any reason, so use that instead.
Fixes: 8d633291b4 ("powerpc/eeh: pseries platform EEH error log retrieval")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
[mpe: Drop no-longer possible error handling as noticed by ajd]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221118150751.469393-6-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa3c668f2f ]
According to MT7622 Reference Manual for Development Board v1.0 the PWM
unit found in the MT7622 SoC also comes with the PWM_CK_26M_SEL register
at offset 0x210 just like other modern MediaTek ARM64 SoCs.
And also MT7622 sets that register to 0x00000001 on reset which is
described as 'Select 26M fix CLK as BCLK' in the datasheet.
Hence set has_ck_26m_sel to true also for MT7622 which results in the
driver writing 0 to the PWM_CK_26M_SEL register which is described as
'Select bus CLK as BCLK'.
Fixes: 0c0ead7623 ("pwm: mediatek: Always use bus clock")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/Y1iF2slvSblf6bYK@makrotopia.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef5bb8e7a7 ]
This driver treats IOMMU_DOMAIN_IDENTITY the same as UNMANAGED, which
cannot possibly be correct.
UNMANAGED domains are required to start out blocking all DMAs. This seems
to be what this driver does as it allocates a first level 'dt' for the IO
page table that is 0 filled.
Thus UNMANAGED looks like a working IO page table, and so IDENTITY must be
a mistake. Remove it.
Fixes: 4100b8c229 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0-v1-97f0adf27b5e+1f0-s50_identity_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef693a8440 ]
Fix the smatch warnings:
drivers/iommu/mtk_iommu.c:878 mtk_iommu_mm_dts_parse() error: uninitialized
symbol 'larbnode'.
If someone abuse the dtsi node(Don't follow the definition of dt-binding),
for example "mediatek,larbs" is provided as boolean property, "larb_nr"
will be zero and cause abnormal.
To fix this problem and improve the code safety, add some checking
for the invalid input from dtsi, e.g. checking the larb_nr/larbid valid
range, and avoid "mediatek,larb-id" property conflicts in the smi-larb
nodes.
Fixes: d2e9a1102c ("iommu/mediatek: Contain MM IOMMU flow with the MM TYPE")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221018024258.19073-5-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2659392856 ]
The mtk_iommu_mm_dts_parse will parse the smi larbs nodes. if the i+1
larb is parsed fail, we should put_device for the i..0 larbs.
There are two places need to comment:
1) The larbid may be not linear mapping, we should loop whole
the array in the error path.
2) I move this line position: "data->larb_imu[id].dev = &plarbdev->dev;"
before "if (!plarbdev->dev.driver)", That means set
data->larb_imu[id].dev before the error path. then we don't need
"platform_device_put(plarbdev)" again in probe_defer case. All depend
on "put_device" of the error path in error cases.
Fixes: d2e9a1102c ("iommu/mediatek: Contain MM IOMMU flow with the MM TYPE")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221018024258.19073-4-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f4ab7da90 ]
In check_all_cpu_dscr_defaults, opendir() opens the directory stream.
Add missing closedir() in the error path to release it.
In check_cpu_dscr_default, open() creates an open file descriptor.
Add missing close() in the error path to release it.
Fixes: ebd5858c90 ("selftests/powerpc: Add test for all DSCR sysfs interfaces")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221205084429.570654-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03f7c1d2a4 ]
Based on getPerfCountInfo v1.018 documentation, some of the
hv_gpci events were deprecated for platform firmware that
supports counter_info_version 0x8 or above.
Fix the hv_gpci event list by adding a new attribute group
called "hv_gpci_event_attrs_v6" and a "ENABLE_EVENTS_COUNTERINFO_V6"
macro to enable these events for platform firmware
that supports counter_info_version 0x6 or below. And assigning
the hv_gpci event list based on output counter info version
of underlying plaform.
Fixes: 97bf264018 ("powerpc/perf/hv-gpci: add the remaining gpci requests")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221130174513.87501-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32c5209214 ]
The interrupt frame detection and loads from the hypothetical pt_regs
are not bounds-checked. The next-frame validation only bounds-checks
STACK_FRAME_OVERHEAD, which does not include the pt_regs. Add another
test for this.
The user could set r1 to be equal to the address matching the first
interrupt frame - STACK_INT_FRAME_SIZE, which is in the previous page
due to the kernel redzone, and induce the kernel to load the marker from
there. Possibly this could cause a crash at least. If the user could
induce the previous page to contain a valid marker, then it might be
able to direct perf to read specific memory addresses in a way that
could be transmitted back to the user in the perf data.
Fixes: 20002ded4d ("perf_counter: powerpc: Add callchain support")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-4-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c76ef3f26 ]
In kill_kprobe(), the check whether disarm_kprobe_ftrace() needs to be
called always fails. This is because before that we set the
KPROBE_FLAG_GONE flag for kprobe so that "!kprobe_disabled(p)" is always
false.
The disarm_kprobe_ftrace() call introduced by commit:
0cb2f1372b ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler")
to fix the NULL pointer reference problem. When the probe is enabled, if
we do not disarm it, this problem still exists.
Fix it by putting the probe enabled check before setting the
KPROBE_FLAG_GONE flag.
Link: https://lore.kernel.org/all/20221126114316.201857-1-lihuafei1@huawei.com/
Fixes: 3031313eb3 ("kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c4a4a4c84 ]
When building with automatic stack variable initialization, GCC 12
complains about variables defined outside of switch case statements.
Move the variable into the case that uses it, which silences the warning:
arch/powerpc/xmon/xmon.c: In function ‘bpt_cmds’:
arch/powerpc/xmon/xmon.c:1529:13: warning: statement will never be executed [-Wswitch-unreachable]
1529 | int mode;
| ^~~~
Fixes: 09b6c1129f ("powerpc/xmon: Fix compile error with PPC_8xx=y")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YySE6FHiOcbWWR+9@work
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ca86eae55 ]
Afer commit 1fa5ae857b ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically. It
needs to be freed when of_device_register() fails. Call put_device() to
give up the reference that's taken in device_initialize(), so that it
can be freed in kobject_cleanup() when the refcount hits 0.
macio device is freed in macio_release_dev(), so the kfree() can be
removed.
Fixes: 1fa5ae857b ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221104032551.1075335-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01657bc14a ]
We currently have 3 different ways that __iommu_probe_device() may be
called, but no real guarantee that multiple callers can't tread on each
other, especially once asynchronous driver probe gets involved. It would
likely have taken a fair bit of luck to hit this previously, but commit
57365a04c9 ("iommu: Move bus setup to IOMMU device registration") ups
the odds since now it's not just omap-iommu that may trigger multiple
bus_iommu_probe() calls in parallel if probing asynchronously.
Add a lock to ensure we can't try to double-probe a device, and also
close some possible race windows to make sure we're truly robust against
trying to double-initialise a group via two different member devices.
Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Fixes: 57365a04c9 ("iommu: Move bus setup to IOMMU device registration")
Link: https://lore.kernel.org/r/1946ef9f774851732eed78760a78ec40dbc6d178.1667591503.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
