[ Upstream commit 811192c5f2 ]
The rcuscale console output claims N grace periods, numbered from zero
to N, which means that there were really N+1 grace periods. The root
cause of this bug is that rcu_scale_writer() stores the number of the
last grace period (numbered from zero) into writer_n_durations[me]
instead of the number of grace periods. This commit therefore assigns
the actual number of grace periods to writer_n_durations[me], and also
makes the corresponding adjustment to the loop outputting per-grace-period
measurements.
Sample of old console output:
rcu-scale: writer 0 gps: 133
......
rcu-scale: 0 writer-duration: 0 44003961
rcu-scale: 0 writer-duration: 1 32003582
......
rcu-scale: 0 writer-duration: 132 28004391
rcu-scale: 0 writer-duration: 133 27996410
Sample of new console output:
rcu-scale: writer 0 gps: 134
......
rcu-scale: 0 writer-duration: 0 44003961
rcu-scale: 0 writer-duration: 1 32003582
......
rcu-scale: 0 writer-duration: 132 28004391
rcu-scale: 0 writer-duration: 133 27996410
Signed-off-by: Jiangong.Han <jiangong.han@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 23fc8df26d ("rcu/rcuscale: Stop kfree_scale_thread thread(s) after unloading rcuscale")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89382022b3 ]
Should an error occur after calling sun8i_ths_resource_init() in the probe
function, some resources need to be released, as already done in the
.remove() function.
Switch to the devm_clk_get_enabled() helper and add a new devm_action to
turn sun8i_ths_resource_init() into a fully managed function.
Move the place where reset_control_deassert() is called so that the
recommended order of reset release/clock enable steps is kept.
A64 manual states that:
3.3.6.4. Gating and reset
Make sure that the reset signal has been released before the release of
module clock gating;
This fixes the issue and removes some LoC at the same time.
Fixes: dccc5c3b6f ("thermal/drivers/sun8i: Add thermal driver for H6/H5/H3/A64/A83T/R40")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/a8ae84bd2dc4b55fe428f8e20f31438bf8bb6762.1684089931.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03f44ffb3d ]
If the intel_pstate driver is set to passive mode, then writing the
same value to the energy_performance_preference sysfs twice will fail.
This is caused by the wrong return value used (index of the matched
energy_perf_string), instead of the length of the passed in parameter.
Fix by forcing the internal return value to zero when the same
preference is passed in by user. This same issue is not present when
active mode is used for the driver.
Fixes: f6ebbcf08f ("cpufreq: intel_pstate: Implement passive mode with HWP enabled")
Reported-by: Niklas Neronin <niklas.neronin@intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b9c3ddcec ]
checker_stack_use_t32strd() and kprobe_handler() can be made static since
they are not used from other files, while coverage_start_registers()
and __kprobes_test_case() are used from assembler code, and just need
a declaration to avoid a warning with the global definition.
arch/arm/probes/kprobes/checkers-common.c:43:18: error: no previous prototype for 'checker_stack_use_t32strd'
arch/arm/probes/kprobes/core.c:236:16: error: no previous prototype for 'kprobe_handler'
arch/arm/probes/kprobes/test-core.c:723:10: error: no previous prototype for 'coverage_start_registers'
arch/arm/probes/kprobes/test-core.c:918:14: error: no previous prototype for '__kprobes_test_case_start'
arch/arm/probes/kprobes/test-core.c:952:14: error: no previous prototype for '__kprobes_test_case_end_16'
arch/arm/probes/kprobes/test-core.c:967:14: error: no previous prototype for '__kprobes_test_case_end_32'
Fixes: 6624cf651f ("ARM: kprobes: collects stack consumption for store instructions")
Fixes: 454f3e132d ("ARM/kprobes: Remove jprobe arm implementation")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4658fe81b3 ]
After commit 3382388d71 ("intel_rapl: abstract RAPL common code"),
accessing to IOSF_MBI interface is done in the RAPL common code.
Thus it is the CONFIG_INTEL_RAPL_CORE that has dependency of
CONFIG_IOSF_MBI, while CONFIG_INTEL_RAPL_MSR does not.
This problem was not exposed previously because all the previous RAPL
common code users, aka, the RAPL MSR and MMIO I/F drivers, have
CONFIG_IOSF_MBI selected.
Fix the CONFIG_IOSF_MBI dependency in RAPL code. This also fixes a build
time failure when the RAPL TPMI I/F driver is introduced without
selecting CONFIG_IOSF_MBI.
x86_64-linux-ld: vmlinux.o: in function `set_floor_freq_atom':
intel_rapl_common.c:(.text+0x2dac9b8): undefined reference to `iosf_mbi_write'
x86_64-linux-ld: intel_rapl_common.c:(.text+0x2daca66): undefined reference to `iosf_mbi_read'
Reference to iosf_mbi.h is also removed from the RAPL MSR I/F driver.
Fixes: 3382388d71 ("intel_rapl: abstract RAPL common code")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/20230601213246.3271412-1-arnd@kernel.org
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71746c995c ]
It turns out that my naive DTC reset logic fails to work as intended,
since, after checking with the hardware designers, the PMU actually
needs to be fully enabled in order to correctly clear any pending
overflows. Therefore, invert the sequence to start with turning on both
enables so that we can reliably get the DTCs into a known state, then
moving to our normal counters-stopped state from there. Since all the
DTM counters have already been unpaired during the initial discovery
pass, we just need to additionally reset the cycle counters to ensure
that no other unexpected overflows occur during this period.
Fixes: 0ba64770a2 ("perf: Add Arm CMN-600 PMU driver")
Reported-by: Geoff Blake <blakgeof@amazon.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0ea4559261ea394f827c9aee5168c77a60aaee03.1684946389.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5d1c87220 ]
Currently, while calculating residency and latency values, right
operands may overflow if resulting values are big enough.
To prevent this, albeit unlikely case, play it safe and convert
right operands to left ones' type s64.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 30f604283e ("PM / Domains: Allow domain power states to be read from DT")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b5bf64c89 ]
Smatch reports:
drivers/clocksource/timer-cadence-ttc.c:529 ttc_timer_probe()
warn: 'timer_baseaddr' from of_iomap() not released on lines: 498,508,516.
timer_baseaddr may have the problem of not being released after use,
I replaced it with the devm_of_iomap() function and added the clk_put()
function to cleanup the "clk_ce" and "clk_cs".
Fixes: e932900a32 ("arm: zynq: Use standard timer binding")
Fixes: 70504f311d ("clocksource/drivers/cadence_ttc: Convert init function to return error")
Signed-off-by: Feng Mingxi <m202271825@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230425065611.702917-1-m202271825@hust.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d9e522010 ]
itimer_delete() has a retry loop when the timer is concurrently expired. On
non-RT kernels this just spin-waits until the timer callback has completed,
except for posix CPU timers which have HAVE_POSIX_CPU_TIMERS_TASK_WORK
enabled.
In that case and on RT kernels the existing task could live lock when
preempting the task which does the timer delivery.
Replace spin_unlock() with an invocation of timer_wait_running() to handle
it the same way as the other retry loops in the posix timer code.
Fixes: ec8f954a40 ("posix-timers: Use a callback for cancel synchronization on PREEMPT_RT")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/87v8g7c50d.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ae6aaf769 ]
When removing a disk with replacement, the replacement will be used to
replace rdev. During this process, there is a brief window in which both
rdev and replacement are read as NULL in raid10_write_request(). This
will result in io not being submitted but it should be.
//remove //write
raid10_remove_disk raid10_write_request
mirror->rdev = NULL
read rdev -> NULL
mirror->rdev = mirror->replacement
mirror->replacement = NULL
read replacement -> NULL
Fix it by reading replacement first and rdev later, meanwhile, use smp_mb()
to prevent memory reordering.
Fixes: 475b0321a4 ("md/raid10: writes should get directed to replacement as well as original.")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230602091839.743798-3-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34817a2441 ]
There are two check of 'mreplace' in raid10_sync_request(). In the first
check, 'need_replace' will be set and 'mreplace' will be used later if
no-Faulty 'mreplace' exists, In the second check, 'mreplace' will be
set to NULL if it is Faulty, but 'need_replace' will not be changed
accordingly. null-ptr-deref occurs if Faulty is set between two check.
Fix it by merging two checks into one. And replace 'need_replace' with
'mreplace' because their values are always the same.
Fixes: ee37d7314a ("md/raid10: Fix raid10 replace hang when new added disk faulty")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230527072218.2365857-2-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 301867b1c1 ]
If we write a large number to md/bitmap_set_bits, md_bitmap_checkpage()
will return -EINVAL because 'page >= bitmap->pages', but the return value
was not checked immediately in md_bitmap_get_counter() in order to set
*blocks value and slab-out-of-bounds occurs.
Move check of 'page >= bitmap->pages' to md_bitmap_get_counter() and
return directly if true.
Fixes: ef42567335 ("md/bitmap: optimise scanning of empty bitmaps.")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230515134808.3936750-2-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 247c8d2f98 ]
A couple of functions from fs/pipe.c are used both internally
and for the watch queue code, but the declaration is only
visible when the latter is enabled:
fs/pipe.c:1254:5: error: no previous prototype for 'pipe_resize_ring'
fs/pipe.c:758:15: error: no previous prototype for 'account_pipe_buffers'
fs/pipe.c:764:6: error: no previous prototype for 'too_many_pipe_buffers_soft'
fs/pipe.c:771:6: error: no previous prototype for 'too_many_pipe_buffers_hard'
fs/pipe.c:777:6: error: no previous prototype for 'pipe_is_unprivileged_user'
Make the visible unconditionally to avoid these warnings.
Fixes: c73be61ced ("pipe: Add general notification queue support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Message-Id: <20230516195629.551602-1-arnd@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e1b37563ca upstream.
gtags considers any file outside of its current working directory
"outside the source tree" and refuses to index it. For O= kernel builds,
or when "make" is invoked from a directory other then the kernel source
tree, gtags ignores the entire kernel source and generates an empty
index.
Force-set gtags current working directory to the kernel source tree.
Due to commit 9da0763bdd ("kbuild: Use relative path when building in
a subdir of the source tree"), if the kernel build is done in a
sub-directory of the kernel source tree, the kernel Makefile will set
the kernel's $srctree to ".." for shorter compile-time and run-time
warnings. Consequently, the list of files to be indexed will be in the
"../*" form, rendering all such paths invalid once gtags switches to the
kernel source tree as its current working directory.
If gtags indexing is requested and the build directory is not the kernel
source tree, index all files in absolute-path form.
Note, indexing in absolute-path form will not affect the generated
index, as paths in gtags indices are always relative to the gtags "root
directory" anyway (as evidenced by "gtags --dump").
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c75f5a5506 upstream.
A use-after-free bug may occur if init_imstt invokes framebuffer_release
and free the info ptr. The caller, imsttfb_probe didn't notice that and
still keep the ptr as private data in pdev.
If we remove the driver which will call imsttfb_remove to make cleanup,
UAF happens.
Fix it by return error code if bad case happens in init_imstt.
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e38910c007 upstream.
With commit d674a8f123 ("can: isotp: isotp_sendmsg(): fix return
error on FC timeout on TX path") the missing correct return value in
the case of a protocol error was introduced.
But the way the error value has been read and sent to the user space
does not follow the common scheme to clear the error after reading
which is provided by the sock_error() function. This leads to an error
report at the following write() attempt although everything should be
working.
Fixes: d674a8f123 ("can: isotp: isotp_sendmsg(): fix return error on FC timeout on TX path")
Reported-by: Carsten Schmidt <carsten.schmidt-achim@t-online.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230607072708.38809-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9c9987bf5 upstream.
Monitoring idletask::thread_info::flags in mwait_play_dead() has been an
obvious choice as all what is needed is a cache line which is not written
by other CPUs.
But there is a use case where a "dead" CPU needs to be brought out of
MWAIT: kexec().
This is required as kexec() can overwrite text, pagetables, stacks and the
monitored cacheline of the original kernel. The latter causes MWAIT to
resume execution which obviously causes havoc on the kexec kernel which
results usually in triple faults.
Use a dedicated per CPU storage to prepare for that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615193330.434553750@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Upstream commit: 522b1d6921
Add a fix for the Zen2 VZEROUPPER data corruption bug where under
certain circumstances executing VZEROUPPER can cause register
corruption or leak data.
The optimal fix is through microcode but in the case the proper
microcode revision has not been applied, enable a fallback fix using
a chicken bit.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9724160b39 ]
When building a kernel with LLVM=1, LLVM_IAS=0 and CONFIG_KASAN=y, LLVM
leaves DWARF tags for the "asan.module_ctor" & co symbols. In turn,
pahole creates BTF_KIND_FUNC entries for these and this makes the BTF
metadata validation fail because they contain a dot.
In a dramatic turn of event, this BTF verification failure can cause
the netfilter_bpf initialization to fail, causing netfilter_core to
free the netfilter_helper hashmap and netfilter_ftp to trigger a
use-after-free. The risk of u-a-f in netfilter will be addressed
separately but the existence of "asan.module_ctor" debug info under some
build conditions sounds like a good enough reason to accept functions
that contain dots in BTF.
Although using only LLVM=1 is the recommended way to compile clang-based
kernels, users can certainly do LLVM=1, LLVM_IAS=0 as well and we still
try to support that combination according to Nick. To clarify:
- > v5.10 kernel, LLVM=1 (LLVM_IAS=0 is not the default) is recommended,
but user can still have LLVM=1, LLVM_IAS=0 to trigger the issue
- <= 5.10 kernel, LLVM=1 (LLVM_IAS=0 is the default) is recommended in
which case GNU as will be used
Fixes: 1dc9285184 ("bpf: kernel side support for BTF Var and DataSec")
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Yonghong Song <yhs@meta.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/bpf/20230615145607.3469985-1-revest@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3923b1e440 upstream.
clean_net() runs in workqueue while walking over the lists, grab mutex.
Fixes: 767d1216bf ("netfilter: nftables: fix possible UAF over chains from packet path in netns")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e1acfa387 upstream.
Bail out in case userspace uses unsupported registers.
Fixes: 49499c3e6e ("netfilter: nf_tables: switch registers to 32 bit addressing")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 85d38d5810 ]
When booting with "intremap=off" and "x2apic_phys" on the kernel command
line, the physical x2APIC driver ends up being used even when x2APIC
mode is disabled ("intremap=off" disables x2APIC mode). This happens
because the first compound condition check in x2apic_phys_probe() is
false due to x2apic_mode == 0 and so the following one returns true
after default_acpi_madt_oem_check() having already selected the physical
x2APIC driver.
This results in the following panic:
kernel BUG at arch/x86/kernel/apic/io_apic.c:2409!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-rc2-ver4.1rc2 #2
Hardware name: Dell Inc. PowerEdge R6515/07PXPY, BIOS 2.3.6 07/06/2021
RIP: 0010:setup_IO_APIC+0x9c/0xaf0
Call Trace:
<TASK>
? native_read_msr
apic_intr_mode_init
x86_late_time_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
secondary_startup_64_no_verify
</TASK>
which is:
setup_IO_APIC:
apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
for_each_ioapic(ioapic)
BUG_ON(mp_irqdomain_create(ioapic));
Return 0 to denote that x2APIC has not been enabled when probing the
physical x2APIC driver.
[ bp: Massage commit message heavily. ]
Fixes: 9ebd680bd0 ("x86, apic: Use probe routines to simplify apic selection")
Signed-off-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230616212236.1389-1-dheerajkumar.srivastava@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 982b173a6c ]
Userspace can race to free the gobj(robj converted from), robj should not
be accessed again after drm_gem_object_put, otherwith it will result in
use-after-free.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48bfd02569 ]
If it is async, runqueue_node is freed in g2d_runqueue_worker on another
worker thread. So in extreme cases, if g2d_runqueue_worker runs first, and
then executes the following if statement, there will be use-after-free.
Signed-off-by: Min Li <lm0963hack@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a05955980 ]
Fix a wrong error return by dropping an error return.
When vidi driver is remvoed, if ctx->raw_edid isn't same as fake_edid_info
then only what we have to is to free ctx->raw_edid so that driver removing
can work correctly - it's not an error case.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03c5c83b70 ]
Avoid linker error for randomly generated config file that
has CONFIG_BRANCH_PROFILE_NONE enabled and make it similar
to riscv, x86 and also to commit 4bf3ec384e ("s390: disable
branch profiling for vdso").
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
