[ Upstream commit 34632975ca ]
DEV_ADDR is defined but not used. Use it in address setting.
Do the same with IPv6 for consistency.
Reported-by: David Ahern <dsahern@gmail.com>
Fixes: fc82d93e57 ("selftests: fib_rule_tests: fix local IPv4 address typo")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6f4051123 ]
Commit 33d915d9e8 ("{nl,mac}80211: allow 4addr AP operation on
crypto controlled devices") has introduced a change which allows
4addr operation on crypto controlled devices (ex: ath10k). This
change has inadvertently impacted the interface combinations logic
on such devices.
General rule is that software interfaces like AP/VLAN should not be
listed under supported interface combinations and should not be
considered during validation of these combinations; because of the
aforementioned change, AP/VLAN interfaces(if present) will be checked
against interfaces supported by the device and blocks valid interface
combinations.
Consider a case where an AP and AP/VLAN are up and running; when a
second AP device is brought up on the same physical device, this AP
will be checked against the AP/VLAN interface (which will not be
part of supported interface combinations of the device) and blocks
second AP to come up.
Add a new API cfg80211_iftype_allowed() to fix the problem, this
API works for all devices with/without SW crypto control.
Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
Fixes: 33d915d9e8 ("{nl,mac}80211: allow 4addr AP operation on crypto controlled devices")
Link: https://lore.kernel.org/r/1563779690-9716-1-git-send-email-mpubbise@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9b3007fec ]
The iolatency controller is based on rq_qos. It increments on
rq_qos_throttle() and decrements on either rq_qos_cleanup() or
rq_qos_done_bio(). a3fb01ba5a fixes the double accounting issue where
blk_mq_make_request() may call both rq_qos_cleanup() and
rq_qos_done_bio() on REQ_NO_WAIT. So checking STS_AGAIN prevents the
double decrement.
The above works upstream as the only way we can get STS_AGAIN is from
blk_mq_get_request() failing. The STS_AGAIN handling isn't a real
problem as bio_endio() skipping only happens on reserved tag allocation
failures which can only be caused by driver bugs and already triggers
WARN.
However, the fix creates a not so great dependency on how STS_AGAIN can
be propagated. Internally, we (Facebook) carry a patch that kills read
ahead if a cgroup is io congested or a fatal signal is pending. This
combined with chained bios progagate their bi_status to the parent is
not already set can can cause the parent bio to not clean up properly
even though it was successful. This consequently leaks the inflight
counter and can hang all IOs under that blkg.
To nip the adverse interaction early, this removes the rq_qos_cleanup()
callback in iolatency in favor of cleaning up always on the
rq_qos_done_bio() path.
Fixes: a3fb01ba5a ("blk-iolatency: only account submitted bios")
Debugged-by: Tejun Heo <tj@kernel.org>
Debugged-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 685703b497 ]
There is a race condition for an established connection that is being closed
by the guest: the refcnt is 4 at the end of hvs_release() (Note: here the
'remove_sock' is false):
1 for the initial value;
1 for the sk being in the bound list;
1 for the sk being in the connected list;
1 for the delayed close_work.
After hvs_release() finishes, __vsock_release() -> sock_put(sk) *may*
decrease the refcnt to 3.
Concurrently, hvs_close_connection() runs in another thread:
calls vsock_remove_sock() to decrease the refcnt by 2;
call sock_put() to decrease the refcnt to 0, and free the sk;
next, the "release_sock(sk)" may hang due to use-after-free.
In the above, after hvs_release() finishes, if hvs_close_connection() runs
faster than "__vsock_release() -> sock_put(sk)", then there is not any issue,
because at the beginning of hvs_close_connection(), the refcnt is still 4.
The issue can be resolved if an extra reference is taken when the
connection is established.
Fixes: a9eeb998c2 ("hv_sock: Add support for delayed close")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a15d56a607 upstream.
Multiple batadv_ogm_packet can be stored in an skbuff. The functions
batadv_iv_ogm_send_to_if()/batadv_iv_ogm_receive() use
batadv_iv_ogm_aggr_packet() to check if there is another additional
batadv_ogm_packet in the skb or not before they continue processing the
packet.
The length for such an OGM is BATADV_OGM_HLEN +
batadv_ogm_packet->tvlv_len. The check must first check that at least
BATADV_OGM_HLEN bytes are available before it accesses tvlv_len (which is
part of the header. Otherwise it might try read outside of the currently
available skbuff to get the content of tvlv_len.
Fixes: ef26157747 ("batman-adv: tvlv - basic infrastructure")
Reported-by: syzbot+355cab184197dbbfa384@syzkaller.appspotmail.com
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8205d5d98e upstream.
When we take an FP unavailable exception in a transaction we have to
account for the hardware FP TM checkpointed registers being
incorrect. In this case for this process we know the current and
checkpointed FP registers must be the same (since FP wasn't used
inside the transaction) hence in the thread_struct we copy the current
FP registers to the checkpointed ones.
This copy is done in tm_reclaim_thread(). We use thread->ckpt_regs.msr
to determine if FP was on when in userspace. thread->ckpt_regs.msr
represents the state of the MSR when exiting userspace. This is setup
by check_if_tm_restore_required().
Unfortunatley there is an optimisation in giveup_all() which returns
early if tsk->thread.regs->msr (via local variable `usermsr`) has
FP=VEC=VSX=SPE=0. This optimisation means that
check_if_tm_restore_required() is not called and hence
thread->ckpt_regs.msr is not updated and will contain an old value.
This can happen if due to load_fp=255 we start a userspace process
with MSR FP=1 and then we are context switched out. In this case
thread->ckpt_regs.msr will contain FP=1. If that same process is then
context switched in and load_fp overflows, MSR will have FP=0. If that
process now enters a transaction and does an FP instruction, the FP
unavailable will not update thread->ckpt_regs.msr (the bug) and MSR
FP=1 will be retained in thread->ckpt_regs.msr. tm_reclaim_thread()
will then not perform the required memcpy and the checkpointed FP regs
in the thread struct will contain the wrong values.
The code path for this happening is:
Userspace: Kernel
Start userspace
with MSR FP/VEC/VSX/SPE=0 TM=1
< -----
...
tbegin
bne
fp instruction
FP unavailable
---- >
fp_unavailable_tm()
tm_reclaim_current()
tm_reclaim_thread()
giveup_all()
return early since FP/VMX/VSX=0
/* ckpt MSR not updated (Incorrect) */
tm_reclaim()
/* thread_struct ckpt FP regs contain junk (OK) */
/* Sees ckpt MSR FP=1 (Incorrect) */
no memcpy() performed
/* thread_struct ckpt FP regs not fixed (Incorrect) */
tm_recheckpoint()
/* Put junk in hardware checkpoint FP regs */
....
< -----
Return to userspace
with MSR TM=1 FP=1
with junk in the FP TM checkpoint
TM rollback
reads FP junk
This is a data integrity problem for the current process as the FP
registers are corrupted. It's also a security problem as the FP
registers from one process may be leaked to another.
This patch moves up check_if_tm_restore_required() in giveup_all() to
ensure thread->ckpt_regs.msr is updated correctly.
A simple testcase to replicate this will be posted to
tools/testing/selftests/powerpc/tm/tm-poison.c
Similarly for VMX.
This fixes CVE-2019-15030.
Fixes: f48e91e87e ("powerpc/tm: Fix FP and VMX register corruption")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190904045529.23002-1-gromero@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 264b563b86 upstream.
Since vhost_exceeds_weight() was introduced, callers need to specify
the packet weight and byte weight in vhost_dev_init(). Note that, the
packet weight isn't counted in this patch to keep the original behavior
unchanged.
Fixes: e82b9b0727 ("vhost: introduce vhost_exceeds_weight()")
Cc: stable@vger.kernel.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08b0c89160 upstream.
We recently added a kfree() after the end of the loop:
if (retries == RETRIES) {
kfree(reply);
return -EINVAL;
}
There are two problems. First the test is wrong and because retries
equals RETRIES if we succeed on the last iteration through the loop.
Second if we fail on the last iteration through the loop then the kfree
is a double free.
When you're reading this code, please note the break statement at the
end of the while loop. This patch changes the loop so that if it's not
successful then "reply" is NULL and we can test for that afterward.
Cc: <stable@vger.kernel.org>
Fixes: 6b7c3b86f0 ("drm/vmwgfx: fix memory leak when too many retries have occurred")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e2d2cc258 upstream.
do_sched_cfs_period_timer() will refill cfs_b runtime and call
distribute_cfs_runtime to unthrottle cfs_rq, sometimes cfs_b->runtime
will allocate all quota to one cfs_rq incorrectly, then other cfs_rqs
attached to this cfs_b can't get runtime and will be throttled.
We find that one throttled cfs_rq has non-negative
cfs_rq->runtime_remaining and cause an unexpetced cast from s64 to u64
in snippet:
distribute_cfs_runtime() {
runtime = -cfs_rq->runtime_remaining + 1;
}
The runtime here will change to a large number and consume all
cfs_b->runtime in this cfs_b period.
According to Ben Segall, the throttled cfs_rq can have
account_cfs_rq_runtime called on it because it is throttled before
idle_balance, and the idle_balance calls update_rq_clock to add time
that is accounted to the task.
This commit prevents cfs_rq to be assgined new runtime if it has been
throttled until that distribute_cfs_runtime is called.
Signed-off-by: Liangyan <liangyan.peng@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: shanpeic@linux.alibaba.com
Cc: stable@vger.kernel.org
Cc: xlpang@linux.alibaba.com
Fixes: d3d9dc3302 ("sched: Throttle entities exceeding their allowed bandwidth")
Link: https://lkml.kernel.org/r/20190826121633.6538-1-liangyan.peng@linux.alibaba.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a36c16efa upstream.
This ThinkCentre machine has a new realtek codec alc222, it is not
in the support list, we add it in the realtek.c then this machine
can apply FIXUPs for the realtek codec.
And this machine has two front mics which can't be handled
by PA so far, it uses the pin 0x18 and 0x19 as the front mics, as
a result the existing FIXUP ALC294_FIXUP_LENOVO_MIC_LOCATION doesn't
work on this machine. Fortunately another FIXUP
ALC283_FIXUP_HEADSET_MIC also can change the location for one of the
two mics on this machine.
Link: https://lore.kernel.org/r/20190904055327.9883-1-hui.wang@canonical.com
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 60083f9e94 upstream.
Original pin node values of ASUS UX431FL with ALC294:
0x12 0xb7a60140
0x13 0x40000000
0x14 0x90170110
0x15 0x411111f0
0x16 0x411111f0
0x17 0x90170111
0x18 0x411111f0
0x19 0x411111f0
0x1a 0x411111f0
0x1b 0x411111f0
0x1d 0x4066852d
0x1e 0x411111f0
0x1f 0x411111f0
0x21 0x04211020
1. Has duplicated internal speakers (0x14 & 0x17) which makes the output
route become confused. So, the output volume cannot be changed by
setting.
2. Misses the headset mic pin node.
This patch disables the confusing speaker (NID 0x14) and enables the
headset mic (NID 0x19).
Link: https://lore.kernel.org/r/20190902100054.6941-1-jian-hong@endlessm.com
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d33cd42d86 upstream.
HP Pavilion 15 (AMD Ryzen-based model) with 103c:84e7 needs the same
quirk like HP Envy/Spectre x360 for enabling the mute LED over Mic3 pin.
[ rearranged in the SSID number order by tiwai ]
Signed-off-by: Sam Bazley <sambazley@fastmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89781d0806 upstream.
The recent change to shuffle the codec initialization procedure for
Realtek via commit 607ca3bd22 ("ALSA: hda/realtek - EAPD turn on
later") caused the silent output on some machines. This change was
supposed to be safe, but it isn't actually; some devices have quirk
setups to override the EAPD via COEF or BTL in the additional verb
table, which is applied at the beginning of snd_hda_gen_init(). And
this EAPD setup is again overridden in alc_auto_init_amp().
For recovering from the regression, tell snd_hda_gen_init() not to
apply the verbs there by a new flag, then apply the verbs in
alc_init().
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204727
Fixes: 607ca3bd22 ("ALSA: hda/realtek - EAPD turn on later")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 333f31436d upstream.
Since the chained quirks via chained_before flag is applied before the
depth check, it may lead to the endless recursive calls, when the
chain were set up incorrectly. Fix it by moving the depth check at
the beginning of the loop.
Fixes: 1f57825077 ("ALSA: hda - Add chained_before flag to the fixup entry")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 950b07c14e ]
This reverts commit 558682b529.
Chris Wilson reports that it breaks his CPU hotplug test scripts. In
particular, it breaks offlining and then re-onlining the boot CPU, which
we treat specially (and the BIOS does too).
The symptoms are that we can offline the CPU, but it then does not come
back online again:
smpboot: CPU 0 is now offline
smpboot: Booting Node 0 Processor 0 APIC 0x0
smpboot: do_boot_cpu failed(-1) to wakeup CPU#0
Thomas says he knows why it's broken (my personal suspicion: our magic
handling of the "cpu0_logical_apicid" thing), but for 5.3 the right fix
is to just revert it, since we've never touched the LDR bits before, and
it's not worth the risk to do anything else at this stage.
[ Hotpluging of the boot CPU is special anyway, and should be off by
default. See the "BOOTPARAM_HOTPLUG_CPU0" config option and the
cpu0_hotplug kernel parameter.
In general you should not do it, and it has various known limitations
(hibernate and suspend require the boot CPU, for example).
But it should work, even if the boot CPU is special and needs careful
treatment - Linus ]
Link: https://lore.kernel.org/lkml/156785100521.13300.14461504732265570003@skylake-alporthouse-com/
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bandan Das <bsd@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e16f3e926 ]
At the moment we initialise the target *mask* of a virtual IRQ to the
VCPU it belongs to, even though this mask is only defined for GICv2 and
quickly runs out of bits for many GICv3 guests.
This behaviour triggers an UBSAN complaint for more than 32 VCPUs:
------
[ 5659.462377] UBSAN: Undefined behaviour in virt/kvm/arm/vgic/vgic-init.c:223:21
[ 5659.471689] shift exponent 32 is too large for 32-bit type 'unsigned int'
------
Also for GICv3 guests the reporting of TARGET in the "vgic-state" debugfs
dump is wrong, due to this very same problem.
Because there is no requirement to create the VGIC device before the
VCPUs (and QEMU actually does it the other way round), we can't safely
initialise mpidr or targets in kvm_vgic_vcpu_init(). But since we touch
every private IRQ for each VCPU anyway later (in vgic_init()), we can
just move the initialisation of those fields into there, where we
definitely know the VGIC type.
On the way make sure we really have either a VGICv2 or a VGICv3 device,
since the existing code is just checking for "VGICv3 or not", silently
ignoring the uninitialised case.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reported-by: Dave Martin <dave.martin@arm.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5fb8e6c02 ]
Fix a leak on the cell refcount in afs_lookup_cell_rcu() due to
non-clearance of the default error in the case a NULL cell name is passed
and the workstation default cell is used.
Also put a bit at the end to make sure we don't leak a cell ref if we're
going to be returning an error.
This leak results in an assertion like the following when the kafs module is
unloaded:
AFS: Assertion failed
2 == 1 is false
0x2 == 0x1 is false
------------[ cut here ]------------
kernel BUG at fs/afs/cell.c:770!
...
RIP: 0010:afs_manage_cells+0x220/0x42f [kafs]
...
process_one_work+0x4c2/0x82c
? pool_mayday_timeout+0x1e1/0x1e1
? do_raw_spin_lock+0x134/0x175
worker_thread+0x336/0x4a6
? rescuer_thread+0x4af/0x4af
kthread+0x1de/0x1ee
? kthread_park+0xd4/0xd4
ret_from_fork+0x24/0x30
Fixes: 989782dcdc ("afs: Overhaul cell database management")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2113c5f62b ]
If after an MMIO exit to userspace a VCPU is immediately run with an
immediate_exit request, such as when a signal is delivered or an MMIO
emulation completion is needed, then the VCPU completes the MMIO
emulation and immediately returns to userspace. As the exit_reason
does not get changed from KVM_EXIT_MMIO in these cases we have to
be careful not to complete the MMIO emulation again, when the VCPU is
eventually run again, because the emulation does an instruction skip
(and doing too many skips would be a waste of guest code :-) We need
to use additional VCPU state to track if the emulation is complete.
As luck would have it, we already have 'mmio_needed', which even
appears to be used in this way by other architectures already.
Fixes: 0d640732db ("arm64: KVM: Skip MMIO insn after emulation")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12fe3dda7e ]
Calling ceph_buffer_put() in __ceph_build_xattrs_blob() may result in
freeing the i_xattrs.blob buffer while holding the i_ceph_lock. This can
be fixed by having this function returning the old blob buffer and have
the callers of this function freeing it when the lock is released.
The following backtrace was triggered by fstests generic/117.
BUG: sleeping function called from invalid context at mm/vmalloc.c:2283
in_atomic(): 1, irqs_disabled(): 0, pid: 649, name: fsstress
4 locks held by fsstress/649:
#0: 00000000a7478e7e (&type->s_umount_key#19){++++}, at: iterate_supers+0x77/0xf0
#1: 00000000f8de1423 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: ceph_check_caps+0x7b/0xc60
#2: 00000000562f2b27 (&s->s_mutex){+.+.}, at: ceph_check_caps+0x3bd/0xc60
#3: 00000000f83ce16a (&mdsc->snap_rwsem){++++}, at: ceph_check_caps+0x3ed/0xc60
CPU: 1 PID: 649 Comm: fsstress Not tainted 5.2.0+ #439
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack+0x67/0x90
___might_sleep.cold+0x9f/0xb1
vfree+0x4b/0x60
ceph_buffer_release+0x1b/0x60
__ceph_build_xattrs_blob+0x12b/0x170
__send_cap+0x302/0x540
? __lock_acquire+0x23c/0x1e40
? __mark_caps_flushing+0x15c/0x280
? _raw_spin_unlock+0x24/0x30
ceph_check_caps+0x5f0/0xc60
ceph_flush_dirty_caps+0x7c/0x150
? __ia32_sys_fdatasync+0x20/0x20
ceph_sync_fs+0x5a/0x130
iterate_supers+0x8f/0xf0
ksys_sync+0x4f/0xb0
__ia32_sys_sync+0xa/0x10
do_syscall_64+0x50/0x1c0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fc6409ab617
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86968ef215 ]
Calling ceph_buffer_put() in __ceph_setxattr() may end up freeing the
i_xattrs.prealloc_blob buffer while holding the i_ceph_lock. This can be
fixed by postponing the call until later, when the lock is released.
The following backtrace was triggered by fstests generic/117.
BUG: sleeping function called from invalid context at mm/vmalloc.c:2283
in_atomic(): 1, irqs_disabled(): 0, pid: 650, name: fsstress
3 locks held by fsstress/650:
#0: 00000000870a0fe8 (sb_writers#8){.+.+}, at: mnt_want_write+0x20/0x50
#1: 00000000ba0c4c74 (&type->i_mutex_dir_key#6){++++}, at: vfs_setxattr+0x55/0xa0
#2: 000000008dfbb3f2 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: __ceph_setxattr+0x297/0x810
CPU: 1 PID: 650 Comm: fsstress Not tainted 5.2.0+ #437
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack+0x67/0x90
___might_sleep.cold+0x9f/0xb1
vfree+0x4b/0x60
ceph_buffer_release+0x1b/0x60
__ceph_setxattr+0x2b4/0x810
__vfs_setxattr+0x66/0x80
__vfs_setxattr_noperm+0x59/0xf0
vfs_setxattr+0x81/0xa0
setxattr+0x115/0x230
? filename_lookup+0xc9/0x140
? rcu_read_lock_sched_held+0x74/0x80
? rcu_sync_lockdep_assert+0x2e/0x60
? __sb_start_write+0x142/0x1a0
? mnt_want_write+0x20/0x50
path_setxattr+0xba/0xd0
__x64_sys_lsetxattr+0x24/0x30
do_syscall_64+0x50/0x1c0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7ff23514359a
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e442737239 ]
test_msr_platform_info_disabled() generates EXIT_SHUTDOWN but VMCB state
is undefined after that so an attempt to launch this guest again from
test_msr_platform_info_enabled() fails. Reorder the tests to make test
pass.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54577e5018 ]
state_test and smm_test are failing on older processors that do not
have xcr0. This is because on those processor KVM does provide
support for KVM_GET/SET_XSAVE (to avoid having to rely on the older
KVM_GET/SET_FPU) but not for KVM_GET/SET_XCRS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 504db087aa ]
nvme_state_set_live() making a path available triggers requeue_work
in order to resubmit requests that ended up on requeue_list when no
paths were available.
This requeue_work may race with concurrent nvme_ns_head_make_request()
that do not observe the live path yet.
Such concurrent requests may by made by either:
- New IO submission.
- Requeue_work triggered by nvme_failover_req() or another ana_work.
A race may cause requeue_work capture the state of requeue_list before
more requests get onto the list. These requests will stay on the list
forever unless requeue_work is triggered again.
In order to prevent such race, nvme_state_set_live() should
synchronize_srcu(&head->srcu) before triggering the requeue_work and
prevent nvme_ns_head_make_request referencing an old snapshot of the
path list.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89eb4d8d25 ]
When building hv_kvp_daemon GCC-8.3 complains:
hv_kvp_daemon.c: In function ‘kvp_get_ip_info.constprop’:
hv_kvp_daemon.c:812:30: warning: ‘ip_buffer’ may be used uninitialized in this function [-Wmaybe-uninitialized]
struct hv_kvp_ipaddr_value *ip_buffer;
this seems to be a false positive: we only use ip_buffer when
op == KVP_OP_GET_IP_INFO and it is only unset when op == KVP_OP_ENUMERATE.
Silence the warning by initializing ip_buffer to NULL.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d09bc83640 ]
Simplify the ring buffer handling with the in-place API.
Also avoid the dynamic allocation and the memory leak in the channel
callback function.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a46fff2f9 ]
BIOS on Samsung 500C Chromebook reports very rudimentary E820 table that
consists of 2 entries:
BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] usable
BIOS-e820: [mem 0x00000000fffff000-0x00000000ffffffff] reserved
It breaks logic in find_trampoline_placement(): bios_start lands on the
end of the first 4k page and trampoline start gets placed below 0.
Detect underflow and don't touch bios_start for such cases. It makes
kernel ignore E820 table on machines that doesn't have two usable pages
below BIOS_START_MAX.
Fixes: 1b3a626436 ("x86/boot/compressed/64: Validate trampoline placement against E820")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203463
Link: https://lkml.kernel.org/r/20190813131654.24378-1-kirill.shutemov@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d05dba2b2 ]
When calling request_threaded_irq() with a CP2112, the function
cp2112_gpio_irq_startup() is called in a IRQ context.
Therefore we can not sleep, and we can not call
cp2112_gpio_direction_input() there.
Move the call to cp2112_gpio_direction_input() earlier to have a working
driver.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1c6ece237 ]
lockdep reports the following deadlock scenario:
WARNING: possible circular locking dependency detected
kworker/1:1/48 is trying to acquire lock:
000000008d7a62b2 (text_mutex){+.+.}, at: kprobe_optimizer+0x163/0x290
but task is already holding lock:
00000000850b5e2d (module_mutex){+.+.}, at: kprobe_optimizer+0x31/0x290
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (module_mutex){+.+.}:
__mutex_lock+0xac/0x9f0
mutex_lock_nested+0x1b/0x20
set_all_modules_text_rw+0x22/0x90
ftrace_arch_code_modify_prepare+0x1c/0x20
ftrace_run_update_code+0xe/0x30
ftrace_startup_enable+0x2e/0x50
ftrace_startup+0xa7/0x100
register_ftrace_function+0x27/0x70
arm_kprobe+0xb3/0x130
enable_kprobe+0x83/0xa0
enable_trace_kprobe.part.0+0x2e/0x80
kprobe_register+0x6f/0xc0
perf_trace_event_init+0x16b/0x270
perf_kprobe_init+0xa7/0xe0
perf_kprobe_event_init+0x3e/0x70
perf_try_init_event+0x4a/0x140
perf_event_alloc+0x93a/0xde0
__do_sys_perf_event_open+0x19f/0xf30
__x64_sys_perf_event_open+0x20/0x30
do_syscall_64+0x65/0x1d0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #0 (text_mutex){+.+.}:
__lock_acquire+0xfcb/0x1b60
lock_acquire+0xca/0x1d0
__mutex_lock+0xac/0x9f0
mutex_lock_nested+0x1b/0x20
kprobe_optimizer+0x163/0x290
process_one_work+0x22b/0x560
worker_thread+0x50/0x3c0
kthread+0x112/0x150
ret_from_fork+0x3a/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(module_mutex);
lock(text_mutex);
lock(module_mutex);
lock(text_mutex);
*** DEADLOCK ***
As a reproducer I've been using bcc's funccount.py
(https://github.com/iovisor/bcc/blob/master/tools/funccount.py),
for example:
# ./funccount.py '*interrupt*'
That immediately triggers the lockdep splat.
Fix by acquiring text_mutex before module_mutex in kprobe_optimizer().
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d5b844a2cf ("ftrace/x86: Remove possible deadlock between register_kprobe() and ftrace_run_update_code()")
Link: http://lkml.kernel.org/r/20190812184302.GA7010@xps-13
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfef46d692 ]
When a Tx timestamp is requested, a pointer to the skb is stored in the
ravb_tstamp_skb struct. This was done without an skb_get. There exists
the possibility that the skb could be freed by ravb_tx_free (when
ravb_tx_free is called from ravb_start_xmit) before the timestamp was
processed, leading to a use-after-free bug.
Use skb_get when filling a ravb_tstamp_skb struct, and add appropriate
frees/consumes when a ravb_tstamp_skb struct is freed.
Fixes: c156633f13 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Tho Vu <tho.vu.wh@rvc.renesas.com>
Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44ef3a0325 ]
In i2400m_barker_db_init(), 'options_orig' is allocated through kstrdup()
to hold the original command line options. Then, the options are parsed.
However, if an error occurs during the parsing process, 'options_orig' is
not deallocated, leading to a memory leak bug. To fix this issue, free
'options_orig' before returning the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3434341004 ]
The driver name gets exposed in sysfs under /sys/bus/pci/drivers
so it should look like other devices. Change it to be common
format (instead of "Cavium PTP").
This is a trivial fix that was observed by accident because
Debian kernels were building this driver into kernel (bug).
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80f0fe0934 ]
There's no need to wait until a completion is received to unmap
TX descriptor buffers that have been passed to the hypervisor.
Instead unmap it when the hypervisor call has completed. This patch
avoids the possibility that a buffer will not be unmapped because
a TX completion is lost or mishandled.
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Tested-by: Devesh K. Singh <devesh_singh@in.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1472cb09f ]
In kalmia_init_and_get_ethernet_addr(), 'usb_buf' is allocated through
kmalloc(). In the following execution, if the 'status' returned by
kalmia_send_init_packet() is not 0, 'usb_buf' is not deallocated, leading
to memory leaks. To fix this issue, add the 'out' label to free 'usb_buf'.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1eca92eef1 ]
In cx82310_bind(), 'dev->partial_data' is allocated through kmalloc().
Then, the execution waits for the firmware to become ready. If the firmware
is not ready in time, the execution is terminated. However, the allocated
'dev->partial_data' is not deallocated on this path, leading to a memory
leak bug. To fix this issue, free 'dev->partial_data' before returning the
error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edc58dd012 ]
When dedupe wants to use the page cache to compare parts of two files
for dedupe, we must be very careful to handle locking correctly. The
current code doesn't do this. It must lock and unlock the page only
once if the two pages are the same, since the overlapping range check
doesn't catch this when blocksize < pagesize. If the pages are distinct
but from the same file, we must observe page locking order and lock them
in order of increasing offset to avoid clashing with writeback locking.
Fixes: 876bec6f9b ("vfs: refactor clone/dedupe_file_range common functions")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9cbf8a648 ]
In lan78xx_probe(), a new urb is allocated through usb_alloc_urb() and
saved to 'dev->urb_intr'. However, in the following execution, if an error
occurs, 'dev->urb_intr' is not deallocated, leading to memory leaks. To fix
this issue, invoke usb_free_urb() to free the allocated urb before
returning from the function.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20fb7c7a39 ]
In myri10ge_probe(), myri10ge_alloc_slices() is invoked to allocate slices
related structures. Later on, myri10ge_request_irq() is used to get an irq.
However, if this process fails, the allocated slices related structures are
not deallocated, leading to memory leaks. To fix this issue, revise the
target label of the goto statement to 'abort_with_slices'.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f967f8b1b ]
If oct->fn_list.enable_io_queues() fails, no cleanup is executed, leading
to memory/resource leaks. To fix this issue, invoke
octeon_delete_instr_queue() before returning from the function.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c554336efa ]
In blocked_fl_write(), 't' is not deallocated if bitmap_parse_user() fails,
leading to a memory leak bug. To fix this issue, free t before returning
the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
