Based on Tuna code from 3.0 ported to 3.4 alarm API.
Change-Id: I9b13209963d5a5043237e9e29f3cb07c40583af2
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Add a generic battery power supply and glue logic for talking to the
board battery driver. This driver handles common chores such as:
* periodic battery level and health monitoring
* kernel log reporting and other debugging features for key
properties provided by different charger, fuel gauge, etc.
components
* ensure properties such as battery health are made available to
userspace
* common processing for board-level battery/case temperature sensors
and policy for charging status based on battery health
Based on work by himihee.seo@samsung.com, ms925.kim@samsung.com, and
joshua.chang@samsung.com.
Change-Id: I5fa8e8d68811d84820b7a130b0245ad2b5b6d36b
Signed-off-by: Todd Poynor <toddpoynor@google.com>
mmc_sdio_init_card function is doing necessary initialization
Change-Id: I7d2e432b2af8a76267378acba07e3e4e8fd1e6bc
Signed-off-by: Hosung Kim <hosung0.kim@samsung.com>
kernel_restart cannot be called from interrupt context. Add support for
commands called from a work function, and implement the "reboot" command
there. Also rename the existing irq-mode command to "reset" and change
it to use machine_restart instead of kernel_restart.
Change-Id: I3c423147c01db03d89e95a5b99096ca89462079f
Signed-off-by: Colin Cross <ccross@android.com>
Not useful to have a separate, non-realtime workqueue for speed down
events, avoid priority inversion for speed up events.
Change-Id: Iddcd05545245c847aa1bbe0b8790092914c813d2
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Fix a problem where the hung task mechanism was deeming the interactive
clock boost thread as hung. This was because the thread is created at
module init but never run/woken up until needed. If the governor is not
being used this can be forever. To workaround this explicitly wake up
the thread once all the necessary data structures are initialized. The
latter required some minor code shuffle.
Signed-off-by: Sam Leffler <sleffler@chromium.org>
Change-Id: Ie2c058dd75dcb6460ea10e7ac997e46baf66b1fe
Register an idle notifier only when the governor is active. Also
short-circuit work of idle end if the governor is not enabled.
Signed-off-by: Sam Leffler <sleffler@chromium.org>
Change-Id: I4cae36dd2e7389540d337d74745ffbaa0131870f
create_bulk_endpoints should not be __init since it is called when
accessory is enabled
Change-Id: If827a4531f0f6c15af938345163923186368e2a5
Signed-off-by: Benoit Goby <benoit@android.com>
Add support for FunctionFS (ffs) to implement usb functions in userspace.
The aliases property stores the list of functions that are implemented
using functionfs.
For example:
echo "adb,mtp" > /sys/class/android_usb/android0/f_ffs/aliases
Then when the function are enabled:
echo "adb,acm" > /sys/class/android_usb/android0/functions
Internally, ffs and acm will be used.
Change-Id: I44117b183d48a5a99ddbee3ef2cf8998be74598e
Signed-off-by: Benoit Goby <benoit@android.com>
Product names may contain spaces and scanf %s only matches the 1st word.
Use strlcpy instead.
Change-Id: Ie8703fea9775f7fc17fe615a42597ca3816d36b0
Signed-off-by: Benoit Goby <benoit@android.com>
Remove the config from the configs list before releasing the spinlock.
Otherwise the other cpu might be processing a SET_CONFIGURATION that
will switch to the configuration that is being released.
Change-Id: Id4da0d0e18ead63e20cb236cd1d3e8e6d116acce
Signed-off-by: Benoit Goby <benoit@android.com>
On non-developer devices kgdb prevents CONFIG_PANIC_TIMEOUT from
rebooting the device after a panic. Add module parameters
debug_core.break_on_exception and debug_core.break_on_panic to
allow skipping debug on panics and exceptions respectively. Both
default to true to preserve existing behavior.
Change-Id: I75dce7263e96cee069a9750920cce83dc6f98e8c
Signed-off-by: Colin Cross <ccross@android.com>
Adds a new trace event to be called from clk_set_parent. Some
cpufreq drivers, including Tegra, reparent the cpu clock to a
slower clock while the main pll is relocking, tracing
clk_set_parent allows traces to show how for long the cpu is
running slower.
Uses a separate TRACE_EVENT instead of the clock event class to
allow the event to contain string names for the child and the
parent.
Signed-off-by: Colin Cross <ccross@android.com>
qtaguid tracks the device stats by monitoring when it goes up and down,
then it gets the dev_stats().
But devs don't correctly report stats (either they don't count headers
symmetrically between rx/tx, or they count internal control messages).
Now qtaguid counts the rx/tx bytes/packets during raw:prerouting and
mangle:postrouting (nat is not available in ipv6).
The results are in
/proc/net/xt_qtaguid/iface_stat_fmt
which outputs a format line (bash expansion):
ifname total_skb_{rx,tx}_{bytes,packets}
Added event counters for pre/post handling.
Added extra ctrl_*() pid/uid debugging.
Change-Id: Id84345d544ad1dd5f63e3842cab229e71d339297
Signed-off-by: JP Abgrall <jpa@google.com>
Send notifications when the label becomes active after an idle period.
Send netlink message notifications in addition to sysfs notifications.
Using a uevent with
subsystem=xt_idletimer
INTERFACE=...
STATE={active,inactive}
This is backport from common android-3.0
commit: beb914e987
with uevent support instead of a new netlink message type.
Change-Id: I31677ef00c94b5f82c8457e5bf9e5e584c23c523
Signed-off-by: Ashish Sharma <ashishsharma@google.com>
Signed-off-by: JP Abgrall <jpa@google.com>
This is required to pass the headers_check
Change-Id: Ic4c773973278cbdf1cb4eb66473826cb96ccbfb3
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Commit b641072 ("security: Add AID_NET_RAW and AID_NET_ADMIN capability
check in cap_capable().") introduces additional checks for AID_NET_xxx
macros. Since the header file including those macros are conditionally
included, the checks should also be conditionally executed.
Change-Id: Iaec5208d5b95a46b1ac3f2db8449c661e803fa5b
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Allow speed to drop to flooor frequency but not below, don't pin
to speed at last boost.
Change-Id: I0147c2b7a2e61ba16820605af6baaf09570be787
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Allow speed drop after min_sample_time elapses from last time
the current speed was last re-validated as appropriate for
current load / input boost.
Allow speed bump after min_sample_time (or above_hispeed_delay)
elapses from the time the current speed was originally set.
Change-Id: Ic25687a7a53d25e6544c30c47d7ab6f27a47bee8
Signed-off-by: Todd Poynor <toddpoynor@google.com>
For systems that set a common speed for all CPUs, checking current
speed here could bypass the intermediate hispeed bump decision for
this CPU when another CPU was already at hispeed. This could
result in an overly high setting (for all CPUs) in situations
where all CPUs were about to drop to load levels that map to
hispeed or below.
Change-Id: I186f23dcfc5e2b6336cab8b0327f0c8a9a4482bc
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Apply min_sample_time to the last time the current target speed
was originally requested or re-validated as appropriate for the
current load, not to the time since the current speed was
originally set. Avoids periodic dips in speed during bursty
loads.
Change-Id: I250bda657985de60373f9897cc41f480664d51a1
Signed-off-by: Todd Poynor <toddpoynor@google.com>
If load is above go_hispeed_load, always go to at least hispeed_freq,
even when reducing speed from a higher speed, not just when jumping
up from minimum speed. Avoids running at a lower than intended
speed after a burst of even higher load.
Change-Id: I5b9d2a15ba25ce609b21bac7c724265cf6838dee
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Evaluate spikes in load (below go_hispeed_load) against the maximum
speed supported by the device, not the current speed (which tends to
make it too difficult to raise speed to intermediate levels until
very busy).
Change-Id: Ib937006abf8bedb60891a739acd733e89b732ae0
Signed-off-by: Todd Poynor <toddpoynor@google.com>
When updating the stats for a given uid it would incorrectly assume
IPV4 and pick up the wrong protocol when IPV6.
Change-Id: Iea4a635012b4123bf7aa93809011b7b2040bb3d5
Signed-off-by: JP Abgrall <jpa@google.com>
There was a case that might have seemed like new_tag_stat was not
initialized and actually used.
Added comment explaining why it was impossible, and a BUG()
in case the logic gets changed.
Change-Id: I1eddd1b6f754c08a3bf89f7e9427e5dce1dfb081
Signed-off-by: JP Abgrall <jpa@google.com>
