commit d98ee2a19c upstream.
The custom ring-buffer implementation was merged without any locking or
explicit memory barriers, but a spinlock was later added by commit
9d33efd9a7 ("USB: ldusb bugfix").
The lock did not cover the update of the tail index once the entry had
been processed, something which could lead to memory corruption on
weakly ordered architectures or due to compiler optimisations.
Specifically, a completion handler running on another CPU might observe
the incremented tail index and update the entry before ld_usb_read() is
done with it.
Fixes: 2824bd250f ("[PATCH] USB: add ldusb driver")
Fixes: 9d33efd9a7 ("USB: ldusb bugfix")
Cc: stable <stable@vger.kernel.org> # 2.6.13
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191022143203.5260-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a97694961 upstream.
Commit 747668dbc0 ("usb-storage: Set virt_boundary_mask to avoid SG
overflows") attempted to solve a problem involving scatter-gather I/O
and USB/IP by setting the virt_boundary_mask for mass-storage devices.
However, it now turns out that this interacts badly with commit
09324d32d2 ("block: force an unlimited segment size on queues with a
virt boundary"), which was added later. A typical error message is:
ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes),
total 32768 (slots), used 97 (slots)
There is no longer any reason to keep the virt_boundary_mask setting
for usb-storage. It was needed in the first place only for handling
devices with a block size smaller than the maxpacket size and where
the host controller was not capable of fully general scatter-gather
operation (that is, able to merge two SG segments into a single USB
packet). But:
High-speed or slower connections never use a bulk maxpacket
value larger than 512;
The SCSI layer does not handle block devices with a block size
smaller than 512 bytes;
All the host controllers capable of SuperSpeed operation can
handle fully general SG;
Since commit ea44d19076 ("usbip: Implement SG support to
vhci-hcd and stub driver") was merged, the USB/IP driver can
also handle SG.
Therefore all supported device/controller combinations should be okay
with no need for any special virt_boundary_mask. So in order to fix
the swiotlb problem, this patch reverts commit 747668dbc0.
Reported-and-tested-by: Piergiorgio Sartor <piergiorgio.sartor@nexgo.de>
Link: https://marc.info/?l=linux-usb&m=157134199501202&w=2
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Seth Bollinger <Seth.Bollinger@digi.com>
CC: <stable@vger.kernel.org>
Fixes: 747668dbc0 ("usb-storage: Set virt_boundary_mask to avoid SG overflows")
Acked-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910211145520.1673-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54f83b8c8e upstream.
Endpoints with a maxpacket length of 0 are probably useless. They
can't transfer any data, and it's not at all unlikely that a UDC will
crash or hang when trying to handle a non-zero-length usb_request for
such an endpoint. Indeed, dummy-hcd gets a divide error when trying
to calculate the remainder of a transfer length by the maxpacket
value, as discovered by the syzbot fuzzer.
Currently the gadget core does not check for endpoints having a
maxpacket value of 0. This patch adds a check to usb_ep_enable(),
preventing such endpoints from being used.
As far as I know, none of the gadget drivers in the kernel tries to
create an endpoint with maxpacket = 0, but until now there has been
nothing to prevent userspace programs under gadgetfs or configfs from
doing it.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+8ab8bf161038a8768553@syzkaller.appspotmail.com
CC: <stable@vger.kernel.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910281052370.1485-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1186f86a71 upstream.
Commit 3ae62a4209 ("UAS: fix alignment of scatter/gather segments"),
copying a similar commit for usb-storage, attempted to solve a problem
involving scatter-gather I/O and USB/IP by setting the
virt_boundary_mask for mass-storage devices.
However, it now turns out that the analogous change in usb-storage
interacted badly with commit 09324d32d2 ("block: force an unlimited
segment size on queues with a virt boundary"), which was added later.
A typical error message is:
ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes),
total 32768 (slots), used 97 (slots)
There is no longer any reason to keep the virt_boundary_mask setting
in the uas driver. It was needed in the first place only for
handling devices with a block size smaller than the maxpacket size and
where the host controller was not capable of fully general
scatter-gather operation (that is, able to merge two SG segments into
a single USB packet). But:
High-speed or slower connections never use a bulk maxpacket
value larger than 512;
The SCSI layer does not handle block devices with a block size
smaller than 512 bytes;
All the host controllers capable of SuperSpeed operation can
handle fully general SG;
Since commit ea44d19076 ("usbip: Implement SG support to
vhci-hcd and stub driver") was merged, the USB/IP driver can
also handle SG.
Therefore all supported device/controller combinations should be okay
with no need for any special virt_boundary_mask. So in order to head
off potential problems similar to those affecting usb-storage, this
patch reverts commit 3ae62a4209.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oneukum@suse.com>
CC: <stable@vger.kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Fixes: 3ae62a4209 ("UAS: fix alignment of scatter/gather segments")
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910231132470.1878-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b24e7598db upstream.
If writeback cache is enabled, then writes might get reordered with
chmod/chown/utimes. The problem with this is that performing the write in
the fuse daemon might itself change some of these attributes. In such case
the following sequence of operations will result in file ending up with the
wrong mode, for example:
int fd = open ("suid", O_WRONLY|O_CREAT|O_EXCL);
write (fd, "1", 1);
fchown (fd, 0, 0);
fchmod (fd, 04755);
close (fd);
This patch fixes this by flushing pending writes before performing
chown/chmod/utimes.
Reported-by: Giuseppe Scrivano <gscrivan@redhat.com>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Fixes: 4d99ff8f12 ("fuse: Turn writeback cache on")
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 39d170b3cb ]
The `ar_usb` field of `ath6kl_usb_pipe_usb_pipe` objects
are initialized to point to the containing `ath6kl_usb` object
according to endpoint descriptors read from the device side, as shown
below in `ath6kl_usb_setup_pipe_resources`:
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
endpoint = &iface_desc->endpoint[i].desc;
// get the address from endpoint descriptor
pipe_num = ath6kl_usb_get_logical_pipe_num(ar_usb,
endpoint->bEndpointAddress,
&urbcount);
......
// select the pipe object
pipe = &ar_usb->pipes[pipe_num];
// initialize the ar_usb field
pipe->ar_usb = ar_usb;
}
The driver assumes that the addresses reported in endpoint
descriptors from device side to be complete. If a device is
malicious and does not report complete addresses, it may trigger
NULL-ptr-deref `ath6kl_usb_alloc_urb_from_pipe` and
`ath6kl_usb_free_urb_to_pipe`.
This patch fixes the bug by preventing potential NULL-ptr-deref
(CVE-2019-15098).
Signed-off-by: Hui Peng <benquike@gmail.com>
Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 943795219d ]
The register access should be using 32-bit reads/writes according to the
datasheet. With the previous generation hardware 16-bit writes have been
working but starting with ICL this is not the case anymore so fix
producer/consumer register update to use correct width register address.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d303de1fcf ]
A customer reported the following softlockup:
[899688.160002] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [test.sh:16464]
[899688.160002] CPU: 0 PID: 16464 Comm: test.sh Not tainted 4.12.14-6.23-azure #1 SLE12-SP4
[899688.160002] RIP: 0010:up_write+0x1a/0x30
[899688.160002] Kernel panic - not syncing: softlockup: hung tasks
[899688.160002] RIP: 0010:up_write+0x1a/0x30
[899688.160002] RSP: 0018:ffffa86784d4fde8 EFLAGS: 00000257 ORIG_RAX: ffffffffffffff12
[899688.160002] RAX: ffffffff970fea00 RBX: 0000000000000001 RCX: 0000000000000000
[899688.160002] RDX: ffffffff00000001 RSI: 0000000000000080 RDI: ffffffff970fea00
[899688.160002] RBP: ffffffffffffffff R08: ffffffffffffffff R09: 0000000000000000
[899688.160002] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b59014720d8
[899688.160002] R13: ffff8b59014720c0 R14: ffff8b5901471090 R15: ffff8b5901470000
[899688.160002] tracing_read_pipe+0x336/0x3c0
[899688.160002] __vfs_read+0x26/0x140
[899688.160002] vfs_read+0x87/0x130
[899688.160002] SyS_read+0x42/0x90
[899688.160002] do_syscall_64+0x74/0x160
It caught the process in the middle of trace_access_unlock(). There is
no loop. So, it must be looping in the caller tracing_read_pipe()
via the "waitagain" label.
Crashdump analyze uncovered that iter->seq was completely zeroed
at this point, including iter->seq.seq.size. It means that
print_trace_line() was never able to print anything and
there was no forward progress.
The culprit seems to be in the code:
/* reset all but tr, trace, and overruns */
memset(&iter->seq, 0,
sizeof(struct trace_iterator) -
offsetof(struct trace_iterator, seq));
It was added by the commit 53d0aa7730 ("ftrace:
add logic to record overruns"). It was v2.6.27-rc1.
It was the time when iter->seq looked like:
struct trace_seq {
unsigned char buffer[PAGE_SIZE];
unsigned int len;
};
There was no "size" variable and zeroing was perfectly fine.
The solution is to reinitialize the structure after or without
zeroing.
Link: http://lkml.kernel.org/r/20191011142134.11997-1-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 062795fcdc ]
Depending on inlining decisions by the compiler, __get/put_user_fn
might become out of line. Then the compiler is no longer able to tell
that size can only be 1,2,4 or 8 due to the check in __get/put_user
resulting in false positives like
./arch/s390/include/asm/uaccess.h: In function ‘__put_user_fn’:
./arch/s390/include/asm/uaccess.h:113:9: warning: ‘rc’ may be used uninitialized in this function [-Wmaybe-uninitialized]
113 | return rc;
| ^~
./arch/s390/include/asm/uaccess.h: In function ‘__get_user_fn’:
./arch/s390/include/asm/uaccess.h:143:9: warning: ‘rc’ may be used uninitialized in this function [-Wmaybe-uninitialized]
143 | return rc;
| ^~
These functions are supposed to be always inlined. Mark it as such.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56e94ea132 ]
In ocfs2_xa_prepare_entry(), there is an if statement on line 2136 to
check whether loc->xl_entry is NULL:
if (loc->xl_entry)
When loc->xl_entry is NULL, it is used on line 2158:
ocfs2_xa_add_entry(loc, name_hash);
loc->xl_entry->xe_name_hash = cpu_to_le32(name_hash);
loc->xl_entry->xe_name_offset = cpu_to_le16(loc->xl_size);
and line 2164:
ocfs2_xa_add_namevalue(loc, xi);
loc->xl_entry->xe_value_size = cpu_to_le64(xi->xi_value_len);
loc->xl_entry->xe_name_len = xi->xi_name_len;
Thus, possible null-pointer dereferences may occur.
To fix these bugs, if loc-xl_entry is NULL, ocfs2_xa_prepare_entry()
abnormally returns with -EINVAL.
These bugs are found by a static analysis tool STCheck written by us.
[akpm@linux-foundation.org: remove now-unused ocfs2_xa_add_entry()]
Link: http://lkml.kernel.org/r/20190726101447.9153-1-baijiaju1990@gmail.com
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a243c82ea ]
Unused portion of a part-written fs-block-sized block is not set to zero
in unaligned append direct write.This can lead to serious data
inconsistencies.
Ocfs2 manage disk with cluster size(for example, 1M), part-written in
one cluster will change the cluster state from UN-WRITTEN to WRITTEN,
VFS(function dio_zero_block) doesn't do the cleaning because bh's state
is not set to NEW in function ocfs2_dio_wr_get_block when we write a
WRITTEN cluster. For example, the cluster size is 1M, file size is 8k
and we direct write from 14k to 15k, then 12k~14k and 15k~16k will
contain dirty data.
We have to deal with two cases:
1.The starting position of direct write is outside the file.
2.The starting position of direct write is located in the file.
We need set bh's state to NEW in the first case. In the second case, we
need mapped twice because bh's state of area out file should be set to
NEW while area in file not.
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/5292e287-8f1a-fd4a-1a14-661e555e0bed@huawei.com
Signed-off-by: Jia Guo <guojia12@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd19c106a3 ]
After 'Initial git repository build' commit,
'mapping_table_ERRHRD' variable has not been used.
So 'mapping_table_ERRHRD' const variable could be removed
to mute below warning message:
fs/cifs/netmisc.c:120:40: warning: unused variable 'mapping_table_ERRHRD' [-Wunused-const-variable]
static const struct smb_to_posix_error mapping_table_ERRHRD[] = {
^
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 955c1532a3 ]
If kzalloc() returns NULL, the error path doesn't stop the flow of
control from entering rtw_hal_read_chip_version() which dereferences the
null pointer. Fix this by adding a 'goto' to the error path to more
gracefully handle the issue and avoid proceeding with initialization
steps that we're no longer prepared to handle.
Also update the debug message to be more consistent with the other debug
messages in this function.
Addresses-Coverity: ("Dereference after null check")
Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com>
Link: https://lore.kernel.org/r/20190927214415.899-1-connor.kuehl@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bdfd9f118 ]
The Intel fixed counters use a special table to override the JSON
information.
During this override the period information from the JSON file got
dropped, which results in inst_retired.any and similar running with
frequency mode instead of a period.
Just specify the expected period in the table.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20190927233546.11533-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee212d6ea2 ]
Whenever an mmap/mmap2 event occurs, the map tree must be updated to add a new
entry. If a new map overlaps a previous map, the overlapped section of the
previous map is effectively unmapped, but the non-overlapping sections are
still valid.
maps__fixup_overlappings() is responsible for creating any new map entries from
the previously overlapped map. It optionally creates a before and an after map.
When creating the after map the existing code failed to adjust the map.pgoff.
This meant the new after map would incorrectly calculate the file offset
for the ip. This results in incorrect symbol name resolution for any ip in the
after region.
Make maps__fixup_overlappings() correctly populate map.pgoff.
Add an assert that new mapping matches old mapping at the beginning of
the after map.
Committer-testing:
Validated correct parsing of libcoreclr.so symbols from .NET Core 3.0 preview9
(which didn't strip symbols).
Preparation:
~/dotnet3.0-preview9/dotnet new webapi -o perfSymbol
cd perfSymbol
~/dotnet3.0-preview9/dotnet publish
perf record ~/dotnet3.0-preview9/dotnet \
bin/Debug/netcoreapp3.0/publish/perfSymbol.dll
^C
Before:
perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\
grep libcoreclr.so | head -n 4
dotnet 1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \
r-xp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.705249: 250000 cpu-clock: \
7fe6159a1f99 [unknown] \
(.../3.0.0-preview9-19423-09/libcoreclr.so)
After:
perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\
grep libcoreclr.so | head -n 4
dotnet 1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \
r-xp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
All the [unknown] symbols were resolved.
Signed-off-by: Steve MacLean <Steve.MacLean@Microsoft.com>
Tested-by: Brian Robbins <brianrob@microsoft.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: John Keeping <john@metanate.com>
Cc: John Salem <josalem@microsoft.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom McDonald <thomas.mcdonald@microsoft.com>
Link: http://lore.kernel.org/lkml/BN8PR21MB136270949F22A6A02335C238F7800@BN8PR21MB1362.namprd21.prod.outlook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c59a962e0 ]
The center temperature of the supported devices stored in the constant
BMC150_ACCEL_TEMP_CENTER_VAL is not 24 degrees but 23 degrees.
It seems that some datasheets were inconsistent on this value leading
to the error. For most usecases will only make minor difference so
not queued for stable.
Signed-off-by: Pascal Bouwmann <bouwmann@tau-tec.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 189927e719 ]
Add support for specifying the xtal load capacitance in the DT node.
The pcf8523 supports xtal load capacitance of 7pF or 12.5pF.
If the rtc has the wrong configuration the time will
drift several hours/week.
The driver use the default value 12.5pF.
The DT may specify either 7000fF or 12500fF.
(The DT uses femto Farad to avoid decimal numbers).
Other values are warned and the driver uses the default value.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fdc1790e6 ]
On plug-in of my USB-C device, its USB_SS_PORT_LS_SS_INACTIVE
link state bit is set. Greping all the kernel for this bit shows
that the port status requests a warm-reset this way.
This just happens, if its the only device on the root hub, the hub
therefore resumes and the HCDs status_urb isn't yet available.
If a warm-reset request is detected, this sets the hubs event_bits,
which will prevent any auto-suspend and allows the hubs workqueue
to warm-reset the port later in port_event.
Signed-off-by: Jan-Marek Glogowski <glogow@fbihome.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff64dd4857 ]
git-diff-index does not refresh the index for you, so using it for a
"-dirty" check can give misleading results. Commit 6147b1cf19
("scripts/setlocalversion: git: Make -dirty check more robust") tried to
fix this by switching to git-status, but it overlooked the fact that
git-status also writes to the .git directory of the source tree, which
is definitely not kosher for an out-of-tree (O=) build. That is getting
reverted.
Fortunately, git-status now supports avoiding writing to the index via
the --no-optional-locks flag, as of git 2.14. It still calculates an
up-to-date index, but it avoids writing it out to the .git directory.
So, let's retry the solution from commit 6147b1cf19 using this new
flag first, and if it fails, we assume this is an older version of git
and just use the old git-diff-index method.
It's hairy to get the 'grep -vq' (inverted matching) correct by stashing
the output of git-status (you have to be careful about the difference
betwen "empty stdin" and "blank line on stdin"), so just pipe the output
directly to grep and use a regex that's good enough for both the
git-status and git-diff-index version.
Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Genki Sky <sky@genki.is>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 399474e4c1 ]
This device uses the SIPODEV SP1064 touchpad, which does not
supply descriptors, so it has to be added to the override list.
Reported-by: Tim Aldridge <taldridge@mac.com>
Signed-off-by: Julian Sax <jsbc@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30ec514d44 ]
The SC16IS752 has an Enhanced Feature Register which is aliased at the
same address as the Interrupt Identification Register; accessing it
requires that a magic value is written to the Line Configuration
Register. If an interrupt is raised while the EFR is mapped in then
the ISR won't be able to access the IIR, leading to the "Unexpected
interrupt" error messages.
Avoid the problem by claiming a mutex around accesses to the EFR
register, also claiming the mutex in the interrupt handler work
item (this is equivalent to disabling interrupts to interlock against
a non-threaded interrupt handler).
See: https://github.com/raspberrypi/linux/issues/2529
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d377535405 ]
mempool_init()/bioset_init() require that the mempools/biosets be zeroed
first; they probably should not _require_ this, but not allocating those
structs with kzalloc is a fairly nonsensical thing to do (calling
mempool_exit()/bioset_exit() on an uninitialized mempool/bioset is legal
and safe, but only works if said memory was zeroed.)
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b21555786f ]
Commit 721b1d98fb ("dm snapshot: Fix excessive memory usage and
workqueue stalls") introduced a semaphore to limit the maximum number of
in-flight kcopyd (COW) jobs.
The implementation of this throttling mechanism is prone to a deadlock:
1. One or more threads write to the origin device causing COW, which is
performed by kcopyd.
2. At some point some of these threads might reach the s->cow_count
semaphore limit and block in down(&s->cow_count), holding a read lock
on _origins_lock.
3. Someone tries to acquire a write lock on _origins_lock, e.g.,
snapshot_ctr(), which blocks because the threads at step (2) already
hold a read lock on it.
4. A COW operation completes and kcopyd runs dm-snapshot's completion
callback, which ends up calling pending_complete().
pending_complete() tries to resubmit any deferred origin bios. This
requires acquiring a read lock on _origins_lock, which blocks.
This happens because the read-write semaphore implementation gives
priority to writers, meaning that as soon as a writer tries to enter
the critical section, no readers will be allowed in, until all
writers have completed their work.
So, pending_complete() waits for the writer at step (3) to acquire
and release the lock. This writer waits for the readers at step (2)
to release the read lock and those readers wait for
pending_complete() (the kcopyd thread) to signal the s->cow_count
semaphore: DEADLOCK.
The above was thoroughly analyzed and documented by Nikos Tsironis as
part of his initial proposal for fixing this deadlock, see:
https://www.redhat.com/archives/dm-devel/2019-October/msg00001.html
Fix this deadlock by reworking COW throttling so that it waits without
holding any locks. Add a variable 'in_progress' that counts how many
kcopyd jobs are running. A function wait_for_in_progress() will sleep if
'in_progress' is over the limit. It drops _origins_lock in order to
avoid the deadlock.
Reported-by: Guruswamy Basavaiah <guru2018@gmail.com>
Reported-by: Nikos Tsironis <ntsironis@arrikto.com>
Reviewed-by: Nikos Tsironis <ntsironis@arrikto.com>
Tested-by: Nikos Tsironis <ntsironis@arrikto.com>
Fixes: 721b1d98fb ("dm snapshot: Fix excessive memory usage and workqueue stalls")
Cc: stable@vger.kernel.org # v5.0+
Depends-on: 4a3f111a73a8c ("dm snapshot: introduce account_start_copy() and account_end_copy()")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2f83e8b0c ]
This simple refactoring moves code for modifying the semaphore cow_count
into separate functions to prepare for changes that will extend these
methods to provide for a more sophisticated mechanism for COW
throttling.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae1093be5a ]
The rw_semaphore is acquired for read only in two places, neither is
performance-critical. So replace it with a mutex -- which is more
efficient.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3840c5b788 upstream.
Nicolas pointed out that the cxgb4 driver is doing dma off of the stack,
which is generally considered a very bad thing. On some architectures it
could be a security problem, but odds are none of them actually run this
driver, so it's just a "normal" bug.
Resolve this by allocating the memory for a message off of the heap
instead of the stack. kmalloc() always will give us a proper memory
location that DMA will work correctly from.
Link: https://lore.kernel.org/r/20191001165611.GA3542072@kroah.com
Reported-by: Nicolas Waisman <nico@semmle.com>
Tested-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45144d42f2 upstream.
There is an arbitrary difference between the system resume and
runtime resume code paths for PCI devices regarding the delay to
apply when switching the devices from D3cold to D0.
Namely, pci_restore_standard_config() used in the runtime resume
code path calls pci_set_power_state() which in turn invokes
__pci_start_power_transition() to power up the device through the
platform firmware and that function applies the transition delay
(as per PCI Express Base Specification Revision 2.0, Section 6.6.1).
However, pci_pm_default_resume_early() used in the system resume
code path calls pci_power_up() which doesn't apply the delay at
all and that causes issues to occur during resume from
suspend-to-idle on some systems where the delay is required.
Since there is no reason for that difference to exist, modify
pci_power_up() to follow pci_set_power_state() more closely and
invoke __pci_start_power_transition() from there to call the
platform firmware to power up the device (in case that's necessary).
Fixes: db288c9c5f ("PCI / PM: restore the original behavior of pci_set_power_state()")
Reported-by: Daniel Drake <drake@endlessm.com>
Tested-by: Daniel Drake <drake@endlessm.com>
Link: https://lore.kernel.org/linux-pm/CAD8Lp44TYxrMgPLkHCqF9hv6smEurMXvmmvmtyFhZ6Q4SE+dig@mail.gmail.com/T/#m21be74af263c6a34f36e0fc5c77c5449d9406925
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d5c1a037d upstream.
xenvif_connect_data() calls module_put() in case of error. This is
wrong as there is no related module_get().
Remove the superfluous module_put().
Fixes: 279f438e36 ("xen-netback: Don't destroy the netdev until the vif is shut down")
Cc: <stable@vger.kernel.org> # 3.12
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 65650b3513 upstream.
It is incorrect to set the cpufreq syscore shutdown callback pointer
to cpufreq_suspend(), because that function cannot be run in the
syscore stage of system shutdown for two reasons: (a) it may attempt
to carry out actions depending on devices that have already been shut
down at that point and (b) the RCU synchronization carried out by it
may not be able to make progress then.
The latter issue has been present since commit 45975c7d21 ("rcu:
Define RCU-sched API in terms of RCU for Tree RCU PREEMPT builds"),
but the former one has been there since commit 90de2a4aa9 ("cpufreq:
suspend cpufreq governors on shutdown") regardless.
Fix that by dropping cpufreq_syscore_ops altogether and making
device_shutdown() call cpufreq_suspend() directly before shutting
down devices, which is along the lines of what system-wide power
management does.
Fixes: 45975c7d21 ("rcu: Define RCU-sched API in terms of RCU for Tree RCU PREEMPT builds")
Fixes: 90de2a4aa9 ("cpufreq: suspend cpufreq governors on shutdown")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.0+ <stable@vger.kernel.org> # 4.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
