The platform_set_drvdata() was needed when the driver had an explicit
remove function.
That function got removed a while back, so we don't need to keep a pointer
(on 'dev->driver_data') for the private data of the driver anymore.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The platform_set_drvdata() was needed when the driver had an explicit
remove function.
That function got removed a while back, so we don't need to keep a pointer
(on 'dev->driver_data') for the private data of the driver anymore.
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is no need to call the dev_err_probe() function directly to print
a custom message when handling an error from platform_get_irq() function as
it is going to display an appropriate error message in case of a failure.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The DS4520 is a 9-bit nonvolatile (NV) I/O expander.
It offers users a digitally programmable alternative
to hardware jumpers and mechanical switches that are
being used to control digital logic node.
Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is no need to call the dev_err_probe() function directly to print
a custom message when handling an error from platform_get_irq() function as
it is going to display an appropriate error message in case of a failure.
And the code to handle bank->irq = 0 is redundant because
platform_get_irq() do not return 0.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The 104-DIO-48E features an 8254 Counter/Timer chip providing three
counter/timers which can be used for frequency measurement, frequency
output, pulse width modulation, pulse width measurement, event count,
etc. The counter/timers use the same addresses as PPI 0 (addresses 0x0
to 0x3), so a raw_spinlock_t is used to synchronize operations between
the two regmap mappings to prevent clobbering.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Do not parse the devicetree again when the data is already available
from the IRQ subsystem. This follows the example of the ThunderX and
X-Gene GPIO drivers. The ngpio check is needed to avoid a possible
out-of-bounds read.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
of_irq_count(), or eqivalently platform_irq_count(), simply looks up
successively-numbered IRQs until that fails. Since this driver needs to
look up each IRQ anyway to get its virq number, use that existing loop
to count the IRQs at the same time.
The check against SIFIVE_GPIO_MAX functioned as a bounds check for
chip->irq_number. That is now handled by the loop condition.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
If CONFIG_PM=n (e.g. m68k/allmodconfig):
drivers/gpio/gpio-mxc.c:612:12: error: ‘mxc_gpio_runtime_resume’ defined but not used [-Werror=unused-function]
612 | static int mxc_gpio_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpio/gpio-mxc.c:602:12: error: ‘mxc_gpio_runtime_suspend’ defined but not used [-Werror=unused-function]
602 | static int mxc_gpio_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Fix this by using the non-SET *_PM_OPS to configure the dev_pm_ops
callbacks, and by wrapping the driver.pm initializer insider pm_ptr().
As NOIRQ_SYSTEM_SLEEP_PM_OPS() uses pm_sleep_ptr() internally, the
__maybe_unused annotations for the noirq callbacks are no longer needed,
and can be removed.
Fixes: 3283d820dc ("gpio: mxc: add runtime pm support")
Reported-by: noreply@ellerman.id.au
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Allow the GPIO controller subnode to define GPIO names. Already used in
at least on DTS:
bitmain/bm1880-sophon-edge.dtb: gpio@50027000: gpio-controller@0: 'gpio-line-names' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use devm version of gpiochip add function to handle removal for us.
While here update copyright and module author.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The platform_set_drvdata() call was never used, ever since the driver was
originally added.
It looks like this copy+paste left-over. Possibly the author copied from a
driver that had this line, but also had a remove hook.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
bgpio_init() uses "sz" argument to populate ngpio, which is not
accurate. Instead, read the "ngpios" property from the DT and if it
doesn't exist, use the "sz" argument. With this change, drivers no
longer need to overwrite the ngpio variable after calling bgpio_init().
If the "ngpios" property is specified, bgpio_bits is calculated
as the round up value of ngpio. At the moment, the only requirement
specified is that the round up value must be a multiple of 8 but
it should also be a power of 2 because we provide accessors based
on the bank size in bgpio_setup_accessors().
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Each pin drives a separate interrupt in the parent IRQ domain, so there
is no need to set IRQCHIP_MASK_ON_SUSPEND.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As a preparatory patch and for the sake of consistency, make
gpiochip_hierarchy_add_domain() return IRQ domain. While at it,
rename it to gpiochip_hierarchy_create_domain() to show
the change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Ideally we should not touch data in the given GPIO chip structure.
Let's become closer to it by avoiding altering fwnode member.
The GPIO library must use fwnode from GPIO device and the drivers
might use one from GPIO chip in case they initialized it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Benjamin Tissoires <bentiss@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
GPIO library should rely only on the GPIO device's fwnode.
Hence, replace GPIO chip fwnode usage by respective OF node
of the GPIO device.
JFYI, this is partial revert of 8afe825502 ("gpiolib: of:
Prepare of_gpiochip_add() / of_gpiochip_remove() for fwnode").
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Benjamin Tissoires <bentiss@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add runtime PM support and allow the GPIO controller to enter
into runtime suspend automatically when not in use to save power.
However, it will automatically resume and enable clocks when a
GPIO or IRQ is requested.
While putting the GPIO module itself into power saving mode may not
have an obvious impact on current dissipation, the function is necessary
because the GPIO module disables its clock when idle. This enables the
system an opportunity to power off the parent subsystem, and this conserves
more power. The typical i.MX8 SoC features up to 8 GPIO controllers, but
most of the controllers often remain unused.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We just sorted the entries and fields last release, so just out of a
perverse sense of curiosity, I decided to see if we can keep things
ordered for even just one release.
The answer is "No. No we cannot".
I suggest that all kernel developers will need weekly training sessions,
involving a lot of Big Bird and Sesame Street. And at the yearly
maintainer summit, we will all sing the alphabet song together.
I doubt I will keep doing this. At some point "perverse sense of
curiosity" turns into just a cold dark place filled with sadness and
despair.
Repeats: 80e62bc848 ("MAINTAINERS: re-sort all entries and fields")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull dma-mapping fixes from Christoph Hellwig:
- swiotlb area sizing fixes (Petr Tesarik)
* tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: reduce the number of areas to match actual memory pool size
swiotlb: always set the number of areas before allocating the pool
Pull irq update from Borislav Petkov:
- Optimize IRQ domain's name assignment
* tag 'irq_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqdomain: Use return value of strreplace()
Pull x86 fpu fix from Borislav Petkov:
- Do FPU AP initialization on Xen PV too which got missed by the recent
boot reordering work
* tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/xen: Fix secondary processors' FPU initialization
Pull x86 fix from Thomas Gleixner:
"A single fix for the mechanism to park CPUs with an INIT IPI.
On shutdown or kexec, the kernel tries to park the non-boot CPUs with
an INIT IPI. But the same code path is also used by the crash utility.
If the CPU which panics is not the boot CPU then it sends an INIT IPI
to the boot CPU which resets the machine.
Prevent this by validating that the CPU which runs the stop mechanism
is the boot CPU. If not, leave the other CPUs in HLT"
* tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Don't send INIT to boot CPU
Pull MIPS fixes from Thomas Bogendoerfer:
- fixes for KVM
- fix for loongson build and cpu probing
- DT fixes
* tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled
MIPS: dts: add missing space before {
MIPS: Loongson: Fix build error when make modules_install
MIPS: KVM: Fix NULL pointer dereference
MIPS: Loongson: Fix cpu_probe_loongson() again
Pull xfs fix from Darrick Wong:
"Nothing exciting here, just getting rid of a gcc warning that I got
tired of seeing when I turn on gcov"
* tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix uninit warning in xfs_growfs_data
Pull more smb client updates from Steve French:
- fix potential use after free in unmount
- minor cleanup
- add worker to cleanup stale directory leases
* tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add a laundromat thread for cached directories
smb: client: remove redundant pointer 'server'
cifs: fix session state transition to avoid use-after-free issue
